Production order component batch determination : Over delivery allowed in b

Iu2019m using production order component batch determination in CO02. System is not allowed to allocate an excess component split batch quantity. System is always allowed to allocate exact requirement quantity where to make open quantity is 0.
It generates the following massage once click enter after selecting an excess component quantity. My requirement is to add the excess quantity in component batch determination.
Massage details:
Quantity of batch 0052902459 is reduced to 9.300 KG as split qty > req. qty
Message no. LB034
Diagnosis
The split quantity of the chosen batch has lead to the split quantity total exceeding the required quantity.
System Response
The quantity is rounded down by the system.
Procedure
An overdelivery is not allowed by the current business transaction.
Procedure for System Administration
If necessary, check the batch search strategy to see whether an overdelivery is allowed.
I have maintained the configuration in transaction COB1 as follows to enable over delivery batch determination.
Strategy type: CO01- OrdType/Plnt/Matl
Key combination:     Order type
Over delivery allowed in batch determination: Tick on
Please let me know the configuration to enable to do component batch determination with minus open quantity (Excess component quantity)

Hi,
As I understand it seems that you do not have batch split allowed in the auto batch determination for component materials. And you need to have batch split on a need to basis?
If thats true, then on the line item in the component overview. Select the item details for the Batch that has been determined (general view, there is a field for split in terms of %, change that from 100% to a the lower value you want to pick from that batch). It should then allow you to add more batches.
let me know if my assumption and answer helps.

Similar Messages

  • Production order backflush - Batch determination

    Hi,
    We are following discrete manufacturing with backflush setup for auto GI of materials.
    The entire flow is functioning smoothly, like
    1. Creation of production order & release to production.
    2. Auto goods issue upon first operation confirmation.
    The qty of goods issue is automatically taken from component qty in the order. This works fine for some materials with out any Batch information.
    Where as for those materials require match information, upon order confirmation system throughs an error
    1. "Error in material 75-106674A41 order 8200019041 item 0001"
    2. "Enter Batch"
    Confirmation is through, after we enter the batch details manually.
    How to auto determine  the batch information. Is there any setting that will eliminate the manual batch input.
    Please help and provide me  the steps / setup required to AUTO select the batch details.
    Thanks in advance.
    Raj.

    Hi,
    you have to configure the foll settings in IMG for the batch determination to happen automatically.
    IMG – Logistics general - Batch management – Batch determination & batch check  – strategy types
    1.Define prod order strategy type –
       (you can use CO01 - assign Class type : 023  & name of the class here , also assign sort rule created in step4 CU70 here )
    IMG – Logistics general - Batch management – Batch determination & batch check  – Batch search procedure definition
    2.Define Prod order search procedure (you can use CO0001 in std)
    IMG – Logistics general - Batch management – Batch determination & batch check  –
    Batch search procedure allocation & Activation check
    3.Assign the search proc to prod order and activate check (same as OPL8)
    IMG – Logistics general - Batch management – Batch determination & batch check  – Define sort rules
    4. Create sort sequence CU70
    5. Create Batch search Strategy  COB1 & Assign Sort rule here
    Now you can trigger batch determination in Prod order.
    Regards,
    Sheik

  • Production Order Component Batch Assignment Enhancement Needed

    Dear Experts,
    In a Production Order CO01/CO02 under Components you could assign Batches to a Component/Material. To do this in the Production Order screen click Component Overview button and then select a Component/Material and click Batch Assignment Button. You would be now in u2018Maintain Batch Fixed Reservationsu2019 screen. Here you find right below the u2018Batchesu2019 screen. Where Batches to be assigned to Component are found, I need to add a Column to this Screen and populate at the time when Batch Assignment Button is clicked. I went through all enhancements of Production Order and could not locate any. Please let me know if you find one that could modify the u2018Batchesu2019 screen.
    If you are unable to find one to help youu2019ll further there is an Application Toolbar button called u2018Customer exitu2019 in u2018Maintain Batch Fixed Reservationsu2019 screen and I am unable to locate the Enhancement for this Button.
    Thanks,
    Sri

    Had to close because of Rules

  • Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

    I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order.  Can you pl. tell me how to configure this scenario.
    Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
    Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

    Hi,
    Automatic Batch Determination for production order components is possible by configuration.
    You can also refer below discussions to map your scenario.
    Batch determination in production order | SCN
    Automatic Batch Determination in Production order
    Regards,
    Naresh

  • Issues during Component Batch Determination for Process Orders

    Hi,
    I am encountering a strange issue during component batch determination of process order.
    1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
    "Log cannot be saved: Object/subobject not specified"
    Message no. BL201
    *Diagnosis
    Log save cancelled because at least one log contains no object or subobject.
    Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
    If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
    Procedure for System Administration
    Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
    The possible values for object and sub object must be configured in transaction SLG0.*
    If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
    Again when the order is in REL status and do the determination, It gives the same error.
    This happens only for a specific plant, In other plants batch determination works in all scenarios.
    I checked for all plant related Config for batch determination and coudn't find any discrepancies.
    Please advise how to resolve this issue. Thanks in advance for your help
    Regards,
    Aheesh

    There Is no direct solution for your requirement just try this work around.
    While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
    Regards,
    Ajay Nikte

  • FM or BAPI for production order component split batch

    Hi,
    I'm trying to split a production order component quantity into batchs with FM or BAPI.
    Using BAPI_ALM_ORDER_MAINTAIN i can create or modify components but i can't set field split batch flag SPLKZ and reference SPLVR.
    Can you help me?

    In standard product order process in CO02 when i split material with standard function I obtain several lines. These new lines refer to the originale one by fields SPLVR and SPLKZ.
    Eg. In operation 0010 i've 10 PC of MATERIAL1
    Item
    Material
    Qty
    Batch
    Batch Key (SPLKZ)
    Itm no stock (SPLVR)
    0010
    MATERIAL1
    10 PC
    In CO02 i take MATERIAL1 from BATCH1 and BATCH2 the final result is
    Item
    Material
    Qty
    Batch
    Batch Key (SPLKZ)
    Itm no stock (SPLVR)
    0010
    MATERIAL1
    1
    1
    0010
    MATERIAL1
    7 PC
    BATCH1
    2
    1
    0010
    MATERIAL1
    3 PC
    BATCH2
    2
    1
    So I'm trying to reproduce this standard behavior with BAPI or FM.
    Thaks

  • Help needed in Automatic Batch determination during Delivery

    Hello gurus..
    Can anyone point me in the right direction. I am trying to trigger auto batch determination during delivery creation based on available batches. thank you
    If any can give me the config that goes with it, that'll be great

    Steps to configure Batch Management
    1)  Specify Batch Level
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction  OMCT
    2)  Batch Number - Activate Internal Number Assignment
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction  OMCZ
    3)  Batch Creation - for Goods Movements 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements
    4) Characteristic Value Assignment -- Update Standard Characteristics 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics
    5) Activate Batch Classification for Goods Movements in Inventory Management 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction  OMCV
    6) Batch Determination – Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction  OPLB
    7)  Batch Determination – Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction  V/C7
    8) Batch Determination – Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction  OPLF
    9) Batch Determination – Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction  V/C2
    10) Batch Determination – Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction  OPLE
    11) Batch Determination – Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction  V/C1
    12) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM   Search Procedure Transaction  OMCY
    13) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction  OPLG
    14) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction  V/C3
    15) Batch Determination – Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction  OMCG
    16) Batch Determination – Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction  OPL8
    17) Batch Determination – Batch Search Procedure Allocation(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction  V/C5
    18) Batch Determination – Activate Automatic Batch Determination(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction  V/CL
    19) Batch Determination – Batch Selection Class
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction  CL01
    20) Batch Determination – Sort Rule
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction  CU70
    21) Batch Determination – Make Settings for Batch Where-used list
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction  OMBB
    thanks
    G. Lakshmipathi

  • Component batch determination : Error

    Dear Experts ,
    We are in process of upgradation to ECC 6.0 and while doing unit testing of production order cycle while doing component batch determination i am facing a Runtime error .Has any body gone through upgradation phase and come across such error .If so plz guide me regarding it .
    Regards
    W>A

    Hi Waaseem,
    Post the error shown by SAP ... then we can suggest something.. Apart from this please check that in older version was there any exit or custom development was used for the batch determination. Sometimes during SPDD & SPAU in upgradation we miss some object  which causes this type of issues
    Thanks
    Kaushik

  • Automatic Batch Determination in Delivery documentation

    Dear all,
    I am trying to do automatic batch determination in Delivery created w.r.t. Sales order.
    if the material availability date in Sales order in say 15.11.2007, while activating batch determination check in Sales order will it prompt the batch for the sales order stock for the current date? It is not happening for the current date nor for the future date.
    This is being tested in ECC  6.0.
    Can anyone help with the solution please?
    Thanks
    Kumaran

    Hi Kumarank
    I am not sure whether the following links would be of helpful to you.
    http://help.sap.com/saphelp_47x200/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/25/283c9a4f7811d18a150000e816ae6e/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/25/283ab94f7811d18a150000e816ae6e/frameset.htm
    Thanks
    G. Lakshmipathi

  • Batch determination during delivery and Picking

    Hi,
    Please let me know how to meet the below requirement.
    During delivery creation for sales order automattically through the program RVV50R10C, The system should do the batch determination automatically for the delivered qty and the picked quantity should be filled auotomatically same as the delivered qty.
    I have maintained condition record for batch determination for the combination of Shipping point, Sales document type and Material type and also automatic batch determination for delivery item categories is activated in customization ( the check box for delivery item category is ticked).
    With the above setting manual batch determination is working in delivery. but not the automatic batch determination and also the picked qty is not filled.
    Regards,
    Prasad

    Hi Sats,
    1. The respective item cat. has been checked in Automatic Batch Determination for Delivery Item cat. u2013 Transaction V/CL - maintained
    2. Configured it correctly in transaction V/C5 where you configured the search procedure for batches in the sales docs with respect to the sales area and sales doc type which you are using -maintained
    3. Check if shelf life expiration date needed. If yes check in transaction CL03 with the class type 023 - Class maintained in the material master
    4. Make sure the batch management check box has been ticked for the materials which you want automatic batch determination to be done in MM03 u2013 Sales: General/Plant tab, Purchasing and warehouse management tab. - The batch management indicator is set
    5. Open your delivery in VL03n u2013 check the batch determination display. Select the strategy analysis and check. it gives you information whether the condition types were successfully taken into consideration. If not check in VCH3 -  Condition record has been specified.
    Manual batch determination works ( select the line item in delivery > Batch split> Batch determination )but not the automatic batch determination.
    Regards,
    Prasad

  • FIFO batch determination while delivery in SD

    Hi Experts
    I did tried to search FIFO batch determination while delivery in SD, but could not find any solution. Please suggest.
    1. Strategy type -SD01
    2. Batch search Procedure - SD0001
    3. Allocated SD Search procedure to the sales area + Sales doc. Type
    4. Activated automatic batch determination in SD.
    5. Class - CLASS_FIFO is created with Char- LOBM_LWEDT
    6. Sort rule - SORT_FIFO and assigned Char - LOBM_LWEDT
    7. Create material and assiged Class - CLASS_FIFO and Batch management is activated
    8. Maintained condition record VCH1 in keycombination - Material.
    After all above configuration, I am able to do the automatic batch determiation. The suggest where I am wrong.
    The same configuration I have done for FEFO and its working.
    Thanks in advance.
    Regards,
    Kaushal Sharma.

    I have resolved the problem
    Happy to note you have resolved on your own but at the same time, your above comments are not going to help anybody who face similar issue.  Please make it as a practice to update the forum properly as to how you resolved
    G. Lakshmipathi

  • Adding new column in production order component overview

    Hi Experts,
    Please let me know any enhancement or badi available to add a new column to production order component list. There is a business requirement to display the fixed bin in component list.
    THanks
    RIjil

    Sudhakar,
    Check the MRP parameter 'Individual/Coll' in MRP4 view for the components. This should be set as 2 for collective planning. If this flag is left blank then planning will be based on the parent material (If the parent material is planned for special stock then the components will also be planned for special stock)
    Let me know if this helps.
    Thanks,
    Jaison

  • Production Order Usage Probability should not be allowed to change after GI

    Dear Gurus,
                  pls tell me how to do this ,Production Order Usage Probability should not be allowed to change after Goods Issue (GI) done against Prod Order . pls tell me procedure or any UserEXit for this.
    Thanks in Advance,
    Regards,
    Dev

    Hi,
    Can you elaborate little bit more?
    Regards,
    Sankaran

  • I have change some fields in  (Production order component )

    I have change some fields in (Production order component overview)

    Hi,
    do you want to hide or disable the fields or add new fields ??? by the way can you please let us know the transaction that you are referring to ??
    Regards,
    Santosh

  • Production Order Component Overview

    Hi All ,
    Could you please guide to understand the following will be grateful.
    In the production order component overview screen-MENU BAR is having following list
    Order, Functions, Edit, Goto, u201CCOMPONENTu201D, Environment, System, Help.
    In the above, if you left click the COMPONENT option there will be drill down option, in that there you have u201CCharacteristic Value Assignmentu201D
    u2022 What is the functionality of this option (u201CCharacteristic Value Assignmentu201D) ?
    u2022 If I select the BOM component in the component overview and I left click the COMPONENT option in the menu bar and select the u201CCharacteristic Value Assignmentu201D what will happenu2026.
    Thanks in Advance....

    Hi ,
    This is for the Component selection according to the Characteristic Value it will take you to Class to which Characteristics are
    assigned , say if your component selection based on the characteristics value say if your Hardness of the Raw material is
    99% based on that your Yield would vary for the Finished Product .
    You have created MIC 's with Hardness with characteristic value 95% , 96% , 97% and 98% etc....
    Your Quality lab has given test value for this component as 99% so your component selection will be this characteristic value
    as master data .
    Assign Characterisctics to Class , Assign class to class type 023 / 022
    Regards,
    Jayavimal

Maybe you are looking for

  • Changing from a PowerBook G4 to a MacBook Pro

    I am about to buy a Macbook Pro 15" to replace my 4 year old Powerbook G4. I have backed up the entire Powerbook using an external harddrive and time machine. I have a feeling that my new macbook pro will not recognize this time machine. How can I us

  • Frequency sweep with DAQmx

    The following is the setup : LV7.1 + PCI_6229 + WIN_XP For controlling the drive rpm of a servo motor, I need to generate a range of frequencies from 60 to 2500 at 10 Hz intervals. With the DAQmx polymorphic VI,  "CO Pulse Freq" , I can generate  a p

  • PSE 8 Organizer Troublesome

    PSE Organizer is not the first photo organizer I have ever used, but thought it might be a suitable tool since PSE appeared to be the editing program for my needs. There have been numerous criticisms leveled at PSE Organizer, and at first I thought m

  • After Upgrade to CS4 ... Can I Install CS3 on Different Computer

    Here is a licensing question ... I deactivated CS3 on an older Mac and did a clean install of a CS4 upgrade to a new Mac (I just used the CS3 serial number to validate the upgrade). So, now I'm wondering if the CS license would allow me to legally in

  • I need a replace glass panel for my 2008 20" iMac. Any ideas where i can obtain one?

    I need a replace glass panel for my 2008 20" iMac. Any ideas where i can obtain one? Any suggestions would be welcome.