Production Order confirmation - GI - Backflushing
Hello,
Our requirement is that during, production order confirmation, even if materials are not available, system should allow us to confirm the order. Later will issue GI through COGI.
In OPK4, in the tab "Individual Entry General" we have not checked the boxes in 1) Goods Movements & 2) Termination for Incorrect movements.
Here the important point is , we are making use of the functionality "Back Flushing". Iam afraid system should support our requirement?
Pl. let me know, what config, should i do for this to happen?
Best regards,
K.kumar.
1 Our requirement is that during, production order confirmation, even if materials are not available, system should allow us to confirm the order. Later will issue GI through COGI.
This setting is enough for above Requiremnt
In OPK4, in the tab "Individual Entry General" we have not checked the boxes in 1) Goods Movements & 2) Termination for Incorrect movements.
2) we are making use of the functionality "Back Flushing". Iam afraid system should support our requirement?
No, Backflushing is not a problem, System will support your requirement.
There is no configuration is reqd to meet your requiremnt
Regards,
Sundaresan
Similar Messages
-
Error during Production Order Confirmation mfbf ( backflush)
in my company in sap when i using mfbf for production Order confirmation of tractor then during backflush using mfbf tcode order confirm but in my store dept no metiral cunsume so please regards this problem
with warm regards
pritpal singhDear Pritpal,
sorry dear,today i cant check my inbox immediately. Anyway my mail id is [email protected]
have checked as per my previous post.
regards
pradeep -
Serial Number. Production Order Confirmation. GR. UD. Sales Delivery
Hi Gurus,
Please help on this issue to get any user exits .....
As part of Serial number management, we have a certain issues on serial number confirmation, goods receipt from production order and quality inspection with UD.
Master data:
Finished product material master, Workscheduling view, Serial number profile maintained " ASRN"
Process flow:
1) Avalon Specific Serial numbers generation for finished goods through production order release status.
(A11206000001)
A - Avalon
1 - PCB Unit 1
12 - Year 2012
06 - Week
000001 - Running serial number for the week.
2) Production order confirmation through CO11n transaction.
3) Production order Goods receipt through MIGO transaction against order.
4) Quality Inspection with Usage Decision through QA32 transaction.
5) Goods Issue for Delivery.
SAP Product Error:
1) System does not track and control the operation wise confirmed serial numbers during order confirmation.
2) System does not track and control the finally confirmed serial numbers during order goods receipt.
3) System does not track and control the last goods receipt qty in Usage Decision.
4) For semi finished product, if we maintain serial number profile in workscheduling view, system is not showing goods issue material list in Co11n transaction for the finished goods.
5) Interfacing the serial number reading scanner with SAP, is not working without entering material number and serial number manually.
6) System does not tracking and controlling the last Usage Decision done serial number during Goods issue to Sale order Delivery.
Regards,
SanthaHi Santha,
This is a bit vast, but I'll try to address at least some of the issues:
1- serial number in operation confirmation is not possible, for the reason that serailization is part of stock management, and as WIP in an order, this is not stock yet. Actually you cannot confirm the manufactured material either, and those 2 go together.
For tracking specificly WIP, there's something called WIP batches; you may look into it to see if you can use it.
2- during GR system will propose those SNs that you have defined for the order at release or creation.
3- ?
4- GI in CO11N is provided only for BACKFLUSHED material components. Serialized materials CANNOT be backflushed.
5- You can use a barcode reader to read the serial number (instead of keyboard entry) when cursor is on the right field in the respective screen.
6- ? -
Production order confirmation problems
My production facility has been having problems for years centered around the production order confirmation process. My colleagues and I are considering submitting an OSS note to SAP, but figured that we should present our problems in these forums before making that next step.
Here are some individual issues which I believe may be related. All of these issues occur off and on at random. They will typically occur when more users are working in the SAP system or when SAP is running slow.
- When an order is confirmed and a label is printed, sometimes the quantity on the label will be incorrect. Sometimes no label will print out at all. When the order is unconfirmed and then reconfirmed again, a label prints out with the correct quantity.
- When a confirmation is unconfirmed, the unconfirmation will not backflush the associated materials correctly. Sometimes this error will appear in CO1P for us to re-confirm, but not always.
- Sometimes confirmations will only backflush certain materials and not ALL the components within the production order. When the confirmation is unconfirmed and then reconfirmed again, the confirmation will backflush all materials correctly.
These problems occur at random intervals and never present the user with an error. Close to 100% of the time all the confirmation issues will be corrected by simply u201Cre-doingu201D the confirmation as we did the first time (no changes in the process). Only the second time around there will not be any issues. This leads me to believe there is some internal issue with SAP, perhaps involving which tables CO11N pulls from when a confirmation is made.
Any and all help is appreciated. We currently run the AFS version of SAP. This is my last stop before submitting an OSS note.Hi,
I have not worked on AFS, so consider the below as a pointer which might help:
When you post confirmations & notice that the components are not being backflushed, check in COGI it could be that there are some incorrect goods movement. You will be required to clear these entries from COGI.
I suspect that you notice these because, the confirmations are being posted even before the stock for the same has been received & hence the issue with labels as well.
Do a check on the above, if it resolves the issue, then i would suggest re-design the process to ensure you do not have COGI or COFC entries.
Also do a search in OSS for AFS specific notes on confirmation.
Hope it helps.
Regards,
Vivek -
Production order confirmation with BAPI
Dear PP friends,
I want to create a program to confirm production orders in mass at header level like CO15. To do it I am trying to use BAPI_PRODORDCONF_CREATE_HDR and it works fine for planned backflush.
However, I am not able to change data of goods movement (quantity, warehouse and batch). Is it possible?
What is the function of GOODSMOVEMENTS table?
I studied the following thread but I could not solve it.
Production Order Confirmation BAPI
Does anyone have suggestions?
Thanks in advance.
MarcosHi Caetano,
Thanks for your reply.
I tested BAPI_PRODORDCONF_GET_HDR_PROP and it proposes goods movements according with open quantity of the production order. In this case, would I have to adjust all movements with actual quantity?
Is possible to propose goods movements according with confirmed quantity?
Regards,
Marcos -
Change Work Center during production order confirmation
Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marianonce a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary. -
URGENT: Prob with Production Order Confirmation
Hi Gurus,
I have a problem with Production Order Confirmation.
When I am confirming a Prod Order and if the components present are more than '999', then error is being thrown and Material Document Number is not being created.
I want to split the records into 500 slots and pass them at a time for the creation of the Production Order so that it doesnt throw me an error while creating a Material Document No.
While saving the Production Order confirmation order, it should split the records into 500 slots each and then create Material Document No for each slot.
Can anyone please help me out in this regard, how to solve this.
Thanks & Regards,
Harish KallaHi Harish,
This problem is addressed in OSS Note : 36353
The Symptom reads like this
==========================================================================
When you post documents using the AC interface (from SD, MM or other applications), items appear in the FI document which are identical in all or in almost all fields.
This can also cause error message F5 727 ("Maximum number of items in FI reached"). The system issues this error if more than 999 items occur in an FI document.
===========================================================================
This Note is an elaborate one..
Hence, go through this and ask your FI Consultant to help you in this regard.
All the best..
Regards,
Siva -
Production order confirmation in co11.
In co11 , I want to post balance qty while doing the production order confirmation. actually total qty issue is 10 but confirmed qty is 5 , here balance qty 5 shud be posted automatically while save the confirmation.
solved . developed the custom pgm.
-
Measuring point update by production order confirmation
Hi friends,
I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
Document MeasUnit has a different dimension to the characteristic unit
Message no. IR071
Diagnosis
The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
System Response
Processing will not be continued.
Procedure
Use the possible entries help.
Please suggest the solution.Hello Sir(s)
i have gone through entire post for the subject related to measuring point auto update from production order confirmation. I have tried the same but i dont know what i am missing.
if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity.. i have already maintained standard formulla in prt view.
my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
please advice what value should i put as usage in routing master to get actuall counter update.
Will Highly appreciate your quick reply.
Snapshots
Regards.
Mohammad. -
Restricting Good Receipt Unless Production Order Confirmed
Hi
Experts,
I want to Restricting Good Receipt Unless Production Order Confirmed
I am doing following thing but the error is occured.
Use Tcode BS02 ( Customising USer status profile).
2. Select the order type which you want to configure (eg:PP000001) and choose "Details" button.
3. In the User status table do the following:
a. In the status no field type"1" , status field "Sta1", short text"GR not allowed", lowest no "1", Highest No "2". Mark a tick in the initial stats check box.
b.Next line, type status no field "2" ,status field "sta2", short text"Gr allowed", lowest no "2" , highest no "2".
4. Select the STA1 line and choose details. select the "create"button.select the "GR for prod order", mark "forbidden
radio button" and "set radio button".
5. Select the STA2 line and choose details. Selct the "create"button. select "confirm order", mark "permitted radio button" and "set radio button". Next choose "GR for prod order" , mark "permitted radio button".
6.Save.
Create a prod order and check whether the required scenario is working.
I have created user status profile as PP000001 GR
ERROR
First define allowed object types
Message no. BS218
Diagnosis
The object types for which a status profile may be used define which business transactions are included in business transaction control.
Procedure
First define for which object types this status profile can be used.
What is object type how to define?
Thanks & Regards
PertHi,
Refer to the below thread which addresses the same need:
Re: GR not allowed :BS02
Revert if you face any issues.
Regards,
Vivek -
Is possible to create a TO automatically after production order confirmation?
Hi all
I have just a question in order to know if we can configurate a procedure to a Production Order, so my question
is possible to create a TO automatically after production order confirmation in a standard enviroment?
Thanks in advance for all your commentsHi Gurus,
Thank you for your help in this case.
Process:
The customer create a production order in CO01 and then they confirm the order in CO15, after confirmation TR is created ( we can see this in LB10 ) and negative stock is created ( we can see this in LS24 ).
Requirement:
They are asking to create the TO automatically after the production order confirmation. Negative stock is afecting the process.
Workaround:
They are creating the TO in background in LB10. ( negative is fixed )
Question:
Can we create the TO automatically after confirmation in standard configuration?
if no , how can we confirm this TO .using a JOB option?
TR created after confirmation
TR header
LS24 negative units.
Regards!!
Ronald -
Price difference on cancellation of production order confirmation
Hi,
We are having a material which is maintained at price control "S". We have created a production order for the material. In due course of business, we did confirmation for say 100 pcs of the material. However, immediatly on confirmation, we realized that we do not need to do the confirmation & hence we did the cancellation of the production order confirmation using CO13.
On doing the production order confirmation cancellation, we observed that the system has posted some amount to "price difference account"
We also observed that once in a while this kind of entries do get posted.
It is requested to please let us know in why system is behaving this way?
We have checked SAP Note no 216080 "Price difference when reversing GI for S-Priced material" & SAP Note no 215980 'Price difference during GR for the production order". However we are not convinced that these could be the reason for the price difference.
Thanking you in anticipation
Regards
Santosh Kumar AgarwalHi,
Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
The same thing does not work when we run it through PP (CO11N and then CO13).
Any suggestions on how to approach this and where to check for missing configurations?
Thanks and Regards,
Gaurishankar -
Error during Production Order Confirmation
I get a real wierd error during production Order confirmation. The error message is
"Additional items are not allowed
Message no. ZOAL010"
Can anyone throw some light on this?
Regards
Rajit is not std SAP message.
you can check the user exit for confirmation.
check in transaction code CMOD/SMOD for CONF* -
Total Production Order Confirmation..Urgent
Hi
Can anyone tell me where to find the total production order confirmation by Second ( or minutes or hours ) for any month i.e. say for example March 2007
Please suggest......Its urgent
RgdsHi Vichy,
Try this, COOIS,
List =confirmation
Profile =std profile
selection -> sys status =CNF
Resrict ther report with Dates with Order header level.
To get activity values use change layout option inside the report.
Select the field like unit/activity. from change lay out menu.
Pradeep
Edited by: Pradeep Kumar on Apr 18, 2008 9:19 AM -
Production Order Confirm/Label Printing problems
I am currently having issues printing out labels for production orders. Whenever I confirm an order, our printer will print out a different quantity or no label at all.
Here is a brief history of production order confirmations today....
Entered Printed
80 40 (2 labels of 20)
20 No Print
20 No Print
40 No Print
ALL confirmations were accepted by SAP
SAP WILL often drag during a normal confirmation when correct labels are printed
SAP will NOT drag when a confirmation is entered and no labels are printed
Yesterday I had a confirmation for 10 print out a label for 19. All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities. If all the lot sizes in SAP are correct, what do you think the issue might be?Hi,
Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
Regards,
Vivek
Maybe you are looking for
-
Hello, Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my
-
Transfer old admin to new name-name change
I recently have gotten divorced and changed my name-my old name holds unpleqsant memories for me.Is there a way to change the name on my current admin account while retaining all my program settings etc.? Or is there another way to do this?thank you
-
Why does Firefox continue to block all popups even tho I disabled popups?
Even though I have disabled FireFox pop-up blocker in Tools, Options, content FireFox blocks EVERY pop-up or site redirect. The only other thing is that quit often I get an error message when I try to open FireFox. It works properly the second or thi
-
Invoke E-Business Suite PA_PROJECT_PUB.Update API via apps adapter
Hi, I am trying to invoke an R12 API called PA_PROJECT_PUB.Update Project with the help of the apps adapter in J developer. I have set the context settings too in the invoke activity's properties, jca.apps.Username, jca.apps.Responsibility, jca.apps.
-
Scrolling of several ContainerController
Hi, I have a TextFlow with several containerControllers. Is it possible to scroll several linked containers? It appears that the text placed in each containers can't "move" a controller to another ... Solutions exist, or I need to implement a custom