Production Order in ETO

Hi Gurus,
In ETO (Engineer to Order) scenario what is best practise to generate Production Order?
Is the Production order is generated at WBS element or Plant level? If the Production order is generated at plant level how raw mat is consumed from project stock.
How the HALB costing is done in ETO scenario. WIll the Cost of HALB is reflected on project? If yes at what price?

Q1a - The inv/coll requirement in MRP4 is blank (ind/collective). Still we are unable consume the mat from WBS1.1.
A - Make it 2 or 1..if 1 you cannot issue from one WBS to other, if 2 you can issue as it acts as w/o a/c assignment
Q3a- My question in ETO scenarion Is FERT Is attached to the activity and BOM exploded in MRP or HALB is attached to activity and during MRP ...it is exploded and dependent requirements are generated.
A- I have not understood what do you mean by activity..anyhow during MRP only the depeddent requirements will be generated unless you have assembly to order (stg 80 series). Hence MRP drives explotion of BOM
Q4. During MRP, PR is getting created at WBS2.1 for RAW materail as raw is available at WBS1.1. Can setting be made such way that during MRP, availability check is done at Project level but not at WBS level. Currently we are not using any stratergy grp for HALB.
A - PR is getting generated as theere is a depeddent requirement in WBS 2.1, hence you can do WBS to WBS transfer using 411Q. About the availability check at project levele during MRP run is not fesible...pl refer Q1a answer. Go for ind/coll requirement = 2 for such raw materials.

Similar Messages

Production Order reservation(ETO) not deleting after PGI (VL01N)

Hi All,
Greetings!!!
A query, regarding ETO (Project system)
ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI, production order reservation is not deleting.
Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
Which requirement class and movement type I need to determine in Sales order.
Please do needful.
Very High,
Thanks,
Prasad.

This is standard SAP
SAP process is to deliver project stock using project delivery , where in PGI happens against the reservation created & deletes RESERVATION.
wherein if you do PGI for order ( sale order or prod order ) , it happens against project stock ( spe stk Q - 281 movement ) i.e., against WBS element
I faced the same for sale order delivery of project stock .
we are selecting FINAL Issue indicator through user exit which triggers when PGI is clicked
This will delete RESERVATION from stock overview
hope this helps ...Let me know if you found any alternative

Error in Conversion of Planned Orders to AFS production Orders

Dear Mam/Sir,
We are working in AFS Scenario.There are following observations during
AFS BOM/Planned order conversion/Material availabilty as follows:
1) When Item category 'T'(Text Item) is used ,with 'witout fixed qty. indicator'in AFS BOM,then during the MRP Run BOM gets exploded & dependent requirements are created for AFS /non-AFS Components. But, when Bill of Material Tab is accessesd in the Planned Order system throws error'REQUIRED PARAMETER MISSING WHEN CALLIN UP MODULE MARC_SINGLE_READ'.When this planned order is converted to Production order, Order reservation is created only for NON-AFS(std. component).
2) When a Planned order(with all BOM components item category 'L') is converted ,then system gives error in material availability check : Message no.AG022'An error occurred during Remote Function call on the ATP Server'.
3) When for a AFS material BOM components with item category'L' is used an order is created.during material availabilty check system shows missing part. The moment a 'text' item is added in BOM the for the same order system commits all components.Though components are missing.
Kindly advise.
regards,
Stuti

Hi,
Good to know that your problem is resolved.
But the error you mentioned appears may be because of configuration problems.
You should check what is account assignment category mentioned in the corresponding requirement class for the strategy group you have used in the materials master.
Also you should check the settlement profile that you have used for your order types.
The account assignment category and settlement profile maintained, must be set properly so that allowed transactions are executed.
Also, there is problem with the message itself which appears for many reasons. More particularly when you are in MTO / ETO scenario or using WBS to create orders.This make it difficult to check the correct cause of the problem!!
Pavan

Cancel Production order

Hi Gurus,
my company manufacturing based on ETO (Engineering to Order). we have created Production order now in work shop the start to build.but suddenly my client request to change few changes in assembly parts. so my engineers created new Assembly part no with diffent bom. my question is how to cancel my old production order and also how to get back cancel production order all components to stock? can you please provide me steps with transaction code.
Thanks and Regards,
Deethya.B

Hi,
Cancel all the confirmation in co13
If you have posted the GI in Co11n, then while doing cancellation of confirmation, system will reverse the goods movement.
If you posted the GI via MB31 or MIGO, then cancel the material document in MIGO
go to >cost> analysis select the cost trend in production order and check the actual value , if the value is zero ,
Then close the order by function --> restrict processing --> close, this order.
If the value is exist, still u have uncanceled goods movement or confirmation is exist find out & reverse the same
and close the order
and the create a new order for new material
It will solve your problem

Open Production Order

Hi have to create a report that has open sales order , open po , open pur req , open planned order and open Production order.
I need the logic for OPEN PRODUCTION ORDERS.
The status of the production orders are maintained in JEST Table .
I need logic to elimate the completed production orders during my selcet . Since JEST Table has multiple entries and for some orders that are released the 'DELV' status wil not be maintained at all at that time.
I wil really appreciate your help , if you can tell me how to emliminate the completed production orders during my select query to get the open prod orders.
Is there any fun moduel or bapi that wil give the Open prod orders ?? or any std report that gives open PO??
Thanks

for this you can use the Function STATUS_TEXT_EDIT , for this pass Objnr (get the objnr from AUFK table using the production order) it will give you the status in the LINE exporting parameters.
Import parameters               Value
CLIENT                          100
FLG_USER_STAT
OBJNR                           QM000200000010
ONLY_ACTIVE                     X
SPRAS                           EN
BYPASS_BUFFER
Export parameters               Value
ANW_STAT_EXISTING
E_STSMA
LINE                            OSNO NOTE   "this is the status text
USER_LINE
STONR                           00
if line CS 'DELV'
"ignore the Order
endif.

Error while raising Production Order

Experts
I get an error for a particular Item while raising a PRODUCTION ORDER
'Location Input does not match the warehouse location of Item'
I work in SAP B1 2007B - PL 18
It will be great if someone can give me the reason/solution for the above ERROR.
REGARDS
KARTHIK

Hi,
Parent item and child items warehouses location should be same.......
Regards
Deepak Tyagi

How to find out the list of Production orders created for sales orders

Dear All,
Our company wants to generate a report for a List of Materials sold out in a particular Product Hierarchy. Along with that we want to know the list of Production orders created for the sales orders.
How to identify the production orders which are created based on Sales orders.
Kindly suggest.
Regards,
Mullairaja

Check these threads
[Sale Order & Production Order|Sale Order & Production Order;
[Re: Linking Production Order against a Sale Order MRP run|Linking Production Order against a Sale Order MRP run;
thanks
G. Lakshmipathi

Creation of Production order in Past dates using RFC

Hi all,
I am using RFC to Create a production order based on the datas available from MES systems.Here the process flow is From MES system datas are passed to interface in file format then from interface will calll the RFC so that the RFC will do the function of Creating the Production order & release in SAP.
Here i face an issue that i have 3 shifts at the end of every shift i have to tranfer the datas from MES to SAP .Which means i have to create 3 Production orders for a day.My issue here is the third shift datas will be availble for me in the next day morning after that only i am able to transfer theses datas to SAP.In this case i want the SAP to create th Production order for third shift in the Previous day time.
Ashift - 7AM t0 3PM
BShift-3PM to 11PM
CShift-11 PM to Next day morning 7 AM
I need SAP to create Production order for Shift C on 11 PM of the Previous day when i transfer it on next day morning 7AM.
Is this possible.
Thanks in Advance,
MBN

Hi,
I mean the Production Created date as the basic date only.
My requirement is for the C shift i will get the output from the MES on the next day morning.After that i wwill transfer the production datas to SAP throgh Interface at that time i need the basic start date & time of the production order to be the C shift starting time that is previous day night 11.00 PM.
Eg.
C shift date 12.04.2010 night 11PM to 7AM
i transfer the c shift production datas from MES to SAP on 13/04/2010 Morning 7AM.But i want these datas to create basic start date & time of the production order on 12/04/2010 11PM.
What should be done to get these.
Thanks in advance,
MBN

Creation of a new costing variant to cost production orders

Hi all,
Currently the business is only able to cost a vehicleu2019s production order at the standard cost value which is determined at the start of the year.
During the year a number of the purchasing values will be updated with a new contract price, this increase will not be reflected in the standard cost until the end of the year.
The business would like a new costing variant which will cost an already created vehicle in SAP by its production order at the u201CCurrent Costu201D (current purchasing info record value).
It will need to be calculated in the following way:
u2022Purchased material - at purchase cost from info record (see below for applicable exchange rate).
u2022Manufactured material - child material to be at purchase cost (from info record). Routing cost (labour\overhead, etc) at current criteria.
u2022No allowance for CPI. [WHAT_ DOES_CPI_MEAN_?]
u2022Exchange rate: ideally, fields are provided to input exchange rate. If this is not possible then apply current monthu2019s exchange;
u2022FRAu2019s - current rate from the info record.
u2022Summary of total material cost by origin code with ability to drill down to line level.
u2022The output of the report will need to be similar to the layout of a production order but with only the current value displayed.
We have some problems to understand this request: we don't know the transaction which is used by the users to costificate a production order and what does it mean "CPI". We are not sure on the feasibility of the costing variant requested because it must consider both actual costs and standard costs.
It should costificate in this way:
(Actual Cost of Row Material * Bom's standard qty) + (Standard price * Standard production time (in the routings).
Could you help us?
Many thanks to all of you, best regards.
Alanis

You can create a new costing variant with a valuation variant that points to inforecords for material prices. Go to OKKN t-code and create the required configuration and start using the new costing variant to measure the current cost of making vehicles.

Changing the Assignment of production order in sales order in MTO scenario.

Hello all!
I have following problem:
After the MRP a production order was created for a sales order. Because of the production in another plant
the production order which was created automatically had to be technically completed and a new one
created.
If you want to check now the availability, the sales order finds nothing, because it's linked to the one,
which was technically completed. Now is the question how can I change the production order for this
sales order. (In the production order the correct sales order is connected!)
As I found out it's connected to the field AUFNR in the table VBEP. But how can I change this
field within a transaction and not in the database?!?

No replies

Error during goods receipt of Finished goods for production order

hi friends
pls help me iam struggle this issue and mentioned the issue .
when i do goods receipt for production order system getting error like
No price could be determined for material/batch FG/ plant ZTP
     Message no. CK 465
Diagnosis
     The system could not calculate a price for material/batch FG/ in plant
     ZTP for valuation view 0, because none of the valuation strategies in
     valuation variant 007 was successful.
System Response
     User-defined error management enables you to specify whether the message
     is an error message, a warning message or an information message.
     o   If you have defined the message as a warning message or an
         information message, the costing item will be entered in the cost
         estimate with a value of zero.
If you have defined the message as an error message, the cost
estimate contains an error or errors.
-   In the case of a material cost estimate, the system sets the
    status KF.
-   If it is a cost estimate without quantity structure, or base
    object cost estimate (that is, a unit cost estimate), the
    system cannot proceed with costing until you have corrected the
    errors.
If the system issues a termination message, the cost estimate cannot
be processed, and processing is terminated.
procedure
    o   Check the master data for material/batch FG/ in plant ZTP.
    o   If you have authorization for Customizing, check the valuation
        strategy for materials in valuation variant 007.
    Note
    If the message is a warning message or an information message, there is
    a danger that materials with errors will be ignored by the system.
    If, because of this, you issue a warning message and at the same time
    include materials with a zero value in cost estimates, you can make the
    following settings for these materials in the costing view of the
    material master:
1. Enter a very low price in the planned price 1, 2 or 3 fields
      manually, for instance 0.01 USD. These prices are used for costing
      purposes only; they are not read by other applications.
2. Enter the highest price unit possible, for example 10000.
      Note: If you enter a new price unit that is higher than the costing
      lot size, the system increases the costing lot size accordingly.
3. Change the valuation strategy, such as strategy 4, where you could
      enter the planned price field in which you entered the low price.
      The system now costs as follows:
      Using the valuation strategy, the system finds planned price 1, 2 or
      3. Due to the low price and high price unit, the system rounds the
      value to zero. However, the cost estimate still obtains status KA
      (free of errors), and no error message is issued.
      This procedure can be used for all materials that have caused error
      message CK465 to be issued.
with regards
dinesh
Edited by: code acess on Nov 8, 2010 4:06 AM

hi ragavendra,
this is dinesh .i maintained the costing view and planned price. but again i have same error.so please reply me where i missed the data
with regards
dinesh
Edited by: code acess on Nov 9, 2010 4:01 AM

Creation Of Production Order without PP module

Hi PP guru's
There is one Specific requirment from Client side, the Requirement is
They are not supposed to implement the PP module in R/3 but they want to get generate the Production Order in R/3 through some interface with lagacy system, based on that they want GR at warehouse,They are using MTS system
They are doing all Production Planning in the exiting Lagacy system and the production Order will be created via interface from those system
for that requirment what master data are requred so that we can full fill the client requirment
valuable suggestion will get awarded
Thanks in advance

Dear,
Technically speaking it is not possible You can shear same thing with your clint also --as there requirement is not specific.
Hope clears to you.
Regards,
R.Brahmnkar

IDOC for Creation of Production order and also adding components

Hi ,
I have a requirement like I get the data from a 3rd party system and using that i have to create production orders and also should be able to add more materials in COMPONENTS part of that Production order. I was looking for a BAPI which can handle this process.
And also can any one help me by letting me know is there any Message type available for handling this process of Production order creation and Adding extyra components to it.
I have a message type LOIPRO (for Production Order) and associated function modle CLOI_MASTERIDOC_CREATE_LOIPRO for creation of master IDoc, but not sure can i handle the Components part in this.
Please do send replies ASAP, its very urgent.
Or else atleast suggest me the other ways of doing this .
Also send me any BDC program if anyone has already developed for this.
Thanks
Kumar
Edited by: Phani Kumar Peddagopu on Mar 19, 2008 6:56 PM

Resolved .

Error on Production Orders Add-on when 2 or more users at the same time.

Hi.
Our add-on creates special production orders (SAPbobsCOM.BoProductionOrderTypeEnum.bopotSpecial) with no problem when used by one user, but if there are two or more users everyone on his own SAPBO session it starts to throw different errors, we think it may be a concurrence problem due to several transactions.
Here a short brief of the code sample and the process:
(error handling and object members not included in the sample)
oDoc.ProductionOrderType = SAPbobsCOM.BoProductionOrderTypeEnum.bopotSpecial
If the oDoc.Add() is correct, We get the last production order created and release it:
Me.sKey = Me.Company.GetNewObjectKey
oDoc = Me.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oProductionOrders)
oDoc.GetByKey(Me.sKey)
oDoc.ProductionOrderStatus = SAPbobsCOM.BoProductionOrderStatusEnum.boposReleased
oDoc.Update()
Then we go for an inventory Entry:
oDoc = Me.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
oDoc.DocDate = Date.Now
oDoc.Lines.BaseEntry = Me.sKey
oDoc.Add
And Finally to close the production order:
oDoc.ProductionOrderStatus = SAPbobsCOM.BoProductionOrderStatusEnum.boposClosed
oDoc.Update()
This works fine when only one user is using the add-on, but in the end there wil be at least eight users simultaneously working with this add-on
The test:
We have four users creating production orders with the add-on.
Two of them get the usual success messages and the created documents in SAPBO are all correct.
The other two users get diferrent errors messages during the process.
If they wait and try again to run the process it works fine.
Repeating the test get errors on different users depending on which one started the process first.
Our client needs to generate beetwen 900 and 1200 production orders per day, so they can't wait until the process is free for each user to work with it.
The common erros detected are:
Changing the status of the production order:
-5002 - The warehouse is not defined for the item.
-4002 - To generate this document,
first define the numbering series in the Administration module
-1029 - Field cannot be updated
Adding the production order and inventory entry:
-2038
-1116
-5002
Regards,
Omar Fonseca

The start transaction model didn't Fit well with all the process we are doing, but the idea of locking or holding the other users seems to work pretty fine, we are now using a flag to determine if someone is doing the process and put in hold the new ones.

Regarding Goods Reversal and Goods Issue process for Production orders

Hi,
I have a issue regarding Goods Reversal and Goods Issue process for Production orders.
Actually I am having a Z - Function Module in that i am passing production order number other details to
make the Goods Reversal happen.
The code for the above is as below:
 i_mvtit-material = wa_mdfa-matnr.
 i_mvtit-plant = i_resb-werks.
 i_mvtit-spec_stock = 'Q'. "New
 i_mvtit-stge_loc = 'ZWIP'.
 i_mvtit-stge_type = i_resb-lgtyp. "New
 i_mvtit-batch = i_resb-charg. "New
 i_mvtit-orderid = i_resb-aufnr.
 i_mvtit-spec_stock = i_resb-sobkz.
 i_mvtit-entry_qnt = i_resb-enmng.
 i_mvtit-entry_uom = i_resb-erfme.
 i_mvtit-entry_uom_iso = i_resb-meins. "New
 i_mvtit-wbs_elem = v_frwbs.
 i_mvtit-move_type = '262'.
 i_mvtit-xstob = 'X'.
 i_mvtit-gr_rcpt = i_resb-aufnr. "New
 i_mvtit-reserv_no = i_resb-rsnum.
 i_mvtit-res_item = i_resb-rspos.
 APPEND i_mvtit.
* HEADER ELEMENTS
 k_gmvt_code-gm_code = '03'.
 k_gmvt_head-pstng_date = sy-datum.
 k_gmvt_head-doc_date = sy-datum.
* CREATE GOODS MOVEMENTS
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = k_gmvt_head
 goodsmvt_code = k_gmvt_code
 TABLES
 goodsmvt_item = i_mvtit
 return = i_return.
The Above code does the Goods Reversal but then i will update one Z Table with fields like
Production Order Number[AUFNR], Number of Reservation[RSNUM], Item Number of Reservation [RSPOS], Material Number [MATNR], Requirement Quantity [BDMNG], WBS element[PSPNR] etc. If Above BAPI runs sucessfully.
That is happening correctly.
But Then actual issue is i have do Goods Issue for those Z-Table records.
There i will give Production order Number's & Storage Location in Selection-Criteria.
Then i need to do Goods Issue for that order.
The code i had written as follows.
* POPULATE VALUES FOR BAPI CALL
 i_mvtit-material = i_zpsi7603_01-matnr.
 i_mvtit-plant = i_resb-werks.
 i_mvtit-spec_stock = 'Q'. "New
 i_mvtit-stge_loc = p_sloc.
 i_mvtit-stge_type = i_resb-lgtyp. "New
 i_mvtit-batch = i_resb-charg.
 i_mvtit-orderid = i_resb-aufnr.
 i_mvtit-spec_stock = i_resb-sobkz.
 i_mvtit-entry_qnt = i_resb-enmng.
 i_mvtit-entry_uom = i_resb-erfme.
 i_mvtit-entry_uom_iso = i_resb-meins. "New
 i_mvtit-wbs_elem = v_frwbs.
 i_mvtit-move_type = c_261.
 i_mvtit-mvt_ind = 'F'. "New
 i_mvtit-xstob = c_x.
 i_mvtit-gr_rcpt = i_resb-aufnr. "New
 i_mvtit-reserv_no = i_resb-rsnum.
 i_mvtit-res_item = i_resb-rspos.
 APPEND i_mvtit.
* HEADER ELEMENTS
 k_gmvt_code-gm_code = c_03.
 k_gmvt_head-pstng_date = sy-datum.
 k_gmvt_head-doc_date = sy-datum.
* CREATE GOODS MOVEMENTS
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = k_gmvt_head
 goodsmvt_code = k_gmvt_code
 TABLES
 goodsmvt_item = i_mvtit
 return = i_return.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = c_x.
 READ TABLE i_return INDEX 1.
 IF i_return-type EQ c_s.
 DELETE FROM zpsi7603_01 WHERE aufnr = i_resb-aufnr AND
 rsnum = i_resb-rsnum AND
 rspos = i_resb-rspos.
 ENDIF.
If i run above code for Goods Issue it is giving error can anybody tell me what changes i need to do to make it work.
The Error Message i am getting is as below:
Qty and / or "delivery completed" ind. or final issue ind. are missing
Error Number for the above is : 264.
Can anybody solve my issue.
Any help will be appreciated.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi,
Thanks boss.
It is working now correctly.
The issue is the i_mvtit-XSTOB should be equal space in case of Goods issue while incase of Reversal it should be equal to X.
Thanks for ur efforts.
I had awarded you points.
Thanks a lot.
Thanks & Regards,
Rayeez.

Production Order in ETO

Similar Messages

Maybe you are looking for