Production-Time Report

Hi All,
Can anybody help me in getting a report containing info abt time taken at each stage of production?

In CO11n while entering confirmation for operations one by one, give the exact timings.. And you can get the report in coois, by selecting confirmations in the list.
karthick

Similar Messages

Report showing planned vs. real production times

Hi,
I am using APO 7.03 and try to find out if there is a possibility of comparing the planned vs. real production times. we need to compare the planned times maintained in operations of the routings with the real production times coming from the confirmations of production orders. Is there any report, etc. in APO PPDS or in SAP PP where we could see that?
thanks in advance for all input!
br,
Wojciech

Hi,
As far as i know, there are not exact report that will fulfill your requirement. However i would suggest you some Standard SAP reports where you can get data.
1) MCPH - Report for work centre Analysis
2) MCRW - Report for resourse analysis
3) COID - Which will give you,
a) Capacity to be confirmed
b) Actual Confirmation.
IN above mentioned report you have to choose key filed to be selected.
Further more,
For planned data,
1) go to table - AFVV, Input Routing No.
Output - VGW03, VGW04 i.e. your planned time for operation
For actual Data,
1) go to table AFRU input Routing ni. or Process Order
Output: Actual phase confirmations.
Revert if you found info useful.

Creation of production order report as per format

Hi!!!!
Gurus!!!!!
I want production order report in some required format.
How to see the format on production order
How to see the report in the following format.
Company name:-
Material requirement Number:-
date :-
Time:-
Due Date:-
Plan Date:-
Production Details:-
Item Code:-
Item Description:-
WH:-
Planned Quantity:-
Completed Quantity:-
Completed date:-
Rejected Quantity:
Waste and Scrap:-
Evaporation Quantity:-
Components:-
Sr.No.      Item No.   Desription             BOM Quantity Planned Quantity Issue Quantity
1     1000     RED                 20                     200                      200
2     1001     BLUE                 30                     300                      300
3     1002     Waste and Scrap -0.45987     -0.9845           -0.984567
          Total Quantity      50.45987     500.9845                     501.98888
Order Remark.
I want to see the report in this format.
Thanks with Regards,
Nitin

Nitin,
Your requirement certainly qualifies for creation of a new Production order Print form and custom print program if you are looking at printing at individual order. If you are looking at report, then certainly a custom report.
Regards,
Prasobh

Webview not showing real time reports

Hi,
I have a customer with IPCC Enterprise 7.5 and using the Webview for reporting. The Real Time reports are empty although campaigns are running and agents are logged in. The Historical Reports works absolutely fine. I noticed that for the dialer port status report, I had to enable a setting through the registry, according to the following document:
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00801dc6cf.shtml
I changed that and then the Real Time report for the dialer port status works. Nothing else from the Real Time reports returns any data.
Thank you,
Agelos

We are using only the Outbound option, so it's only for the outbound. It doesn't give me any Real Time report except the dialer port status. It doesn't return any error, but the report is empty.

Production List Report /sapapo/ppl1

Hi All
I want to understand in Production List Report there is a column called Valuation Mode.The values are 0,1,2,3.
I want to understand how these values get assigned against orders.
Thanx in advance.

Hi Roshan,
Valuation Mode is Effectivity Mode which is coming from Capacity Requirement.The meanings for 0,1,2,3 are as below.
0-Activity must lie within effectivity period
1-Activity end must lie within effectivity time
2-Activity start must lie within effectivity time
3-Do Not Take Validity Period Into Account
I hope this will help you.
Regards,
Saurabh

Down time report

I cannot find where I could change the configuration of gwmon to give me
more than 5 days worth of down time report. Ideally it would be great to set
this to 180 days or more so that we can see how we perform over a long
period of time...
Running on SuSE 9.3
I cannot see any settings that would do that for me in
/opt/novell/groupwise/agents/share/monitor.xml
and
/opt/novell/groupwise/gwmonitor/gwmonitor.cfg
Any suggestions?
Regards,
Sylvain
================================================== =========
Sylvain Phaneuf --- Systems Manager | phone : +44 (0)1865 221323
Information Management Services Unit - Medical Sciences Division
Oxford University | email : [email protected]
Room 3A25B John Radcliffe Hospital | fax : +44 (0) 1865 221322
Oxford OX3 9DU England
================================================== =========

Sylvain,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How to make real-time report per subscriber ( SCE2020)

From the link below Cisco SCA BB SNMP Real Time Monitoring User Guide, 3.1
http://www.cisco.com/en/US/products/ps6135/products_user_guide_chapter09186a008084ddc8.html
it only make report on the global bandwitdh does anyone have i 3rd party software or good document on how to do snmp real-time report per subscriber?
Thanks in Advance.

SCE platform supports a limited set of variables that may be configured via SNMP (read-write variables). Setting a variable via SNMP (as via the CLI) takes effect immediately and affects only the running-configuration. To make this configuration stored for next reboots (startup-configuration) the user must specify it explicitly via CLI or via SNMP using the Cisco enterprise MIB objects.
For the further details for the SCE follow the below url which will help you:
http://www.cisco.com/en/US/products/ps6134/prod_configuration_guide09186a008078b43a.html

How to record non productive time

dear expert:
for our analysis we are recording non productive time in the shop floor and respective cause against it to find an analysis for root cause. is there any way to do the same in SAP. please suggest.
best regards
javed iqbal

Dear ,
I am not sure wether there is a direct solution available.But I am sharing my views .
I think you should have Time Management System under SAP HCM and this will be based on the Work Centre Level Time booking against each order .
Generally , in our case , we have Shop Floor Order Print out (this is SAP generated form ) under Production Supervisour who collects the Actual Production Hr booking , Break time etc and posted through Shift Wise Confiramtion under ECC 6.0 Package Solution 3.0 and then every month , this Time hrs are compared with Time Management System report from HCM so that actual loss of hrs based on employee numbers , can be identifed and pictorial effience can be drawn.
Some reference : http://help.sap.com/erp2005_ehp_03/helpdata/en/46/f2a5ce3cd767f9e10000000a1553f7/frameset.htm
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0fa9a04-376a-2c10-c396-86d32ac80614
Needs discussion with HR and PP guys .
Regards
JH

Track Time Reporting using Att/Abs code 1000 without network/service Order

Hello Everyone,
When I run the tcode CADO, it always shows time reported with Att/Abs code 1000 wherever the time is reported against some service order/network number.
I am specifically interested in those cases where the time is reported against Att/Abs code 1000 but NO service order/network/internal order is mentioned. Some employees have wrongly reported time using Att/Abs code 1000 without network/service order, as they think that the description "Productive hours" for code 1000 means that this hours will "automatically" get charged to some network/service order. We want a report to locate these kind of hours.
We Want to track these hours Reported.
Sunil
Edited by: sunilyadav786 on Dec 23, 2009 6:44 AM

Hi Avisek,
First of all i Like to thank for your reply.
As per your answer i have tried for CADO but i dont find any solution it gives hour booked with service order or network No.
than i have tried CATS_DA for any cost center. This transaction gives me report of all the hour booked against this particular cost center.
But one more problem arise in this transaction that this report shows hour booked against different cost center also. where as i have given only one cost center.
can you help me in this case.

Opportunity Product Revenue report using Narrative option

Hi,
I have created quote report using "Opportunity product revenue report" with the use of narrative option and its working fine but the problem here is if opportunity has multiple product revenue items it shows in multiple quotes. For me it should show in a same quotation if there are multiple opportunity product revenue items in a opportunity. Could anyone help me how can i achieve this.
Any help would be appreciated. Thanks in advance
Thanks & Regards
Ambarish

You need to modify report and club all revenue to single item / row.

Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

John,
I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
Regards,
Shawn

UCCX 10.5 Real Time Report shows "Not Connected"

Hi,
UCCX 10.5 HA over LAN.
As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes.
Any Ideas?
Regards.

Hi Mohamed,
Are you accessing this via the IE or FF? If so which version?
The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
Regards,
Arundeep

Creation of production order report

Dear,
Gurus !!!!!
I am working on production order report.
Could you give me some idea how to create a production order ,stock overview report and
work center reports.
How I see it .
Regards,
Nitin

Dear Nitin,
use std report availble
1. production order COOIS
2. Stock overview MMBE, RWBE, MB5B, MB52
3. For work center use CR05/06/07/08/10/15/60/80
sree

Process order scheduling based on in-house production time.

Hello!
I have following problem. My SAP system is configured in that way that process oedrs are schedulled based on times saved in master recipies. When I input data to in-house production time in master data for materials and make new process order, this time is not
taken into account.
Where I have to change configuration to use in-house production time from material master data to make scheduling process orders.
Regards
Bogdan

Dear
Process Order /Production Order scheduling ( Lead Time Scheduling ) based on the Operation timings in the routing not based on the Material Master In house Production Time in Work Scheduling View .
If you are loking for Basic Date Scheduling then it will happend based on material master , scheduling margin key at material master level .
It depends the selection of Schedueling indicator while excetion of MRP in MD02 .
In case of Process order specifically , you need to schedule the Master Recipe and check whether operations are getting scheduled, if it is not then you need to first the problem, which may be because of wrong "Forumla" or paramater assigned in resource or the resource is not maintained for Finite scheduling (capacity header).
Master reciepe can be schedule in the change transaction C202, and from menu you would find the option to schedule the recipe .
Also check the OPU3/OPU5-Define scheduling parametres wether scheuling , adjust scheduling , scheuling type , logs all are in place .
Check and revert
Regards
JH

In house production time in material master .

Dear All ,
What will happen if i do not enter ( keep blank ) the inhouse production time in MRP 2 view ?
Where i am using routing for all inhouse produced material . all the scheduling parameter are correct as per routing considered .
i have checked the scheduling in routing for these material , scheduling appearing correctly . So this is supposed to be copied as it is in the planned order --> prodn order ( it is happening ) .
So if i do not use in house production time field in MRP2 what will happen ?
Pl guide

Hi,
It is the time to produce a product in a plant in no.of days.
In-house production time:
Specifies the time in workdays needed to produce the material in-house.
In-house production time is independent of the order quantity.
Use:
The system requires the in-house production time to determine the planned dates for planned orders in materials planning.
Procedure
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, tear down, processing, and inter operation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Production Planning and Control (PP)
The time required to produce the material in your plant.
You can enter the in-house production time depending on the order quantity or independent of the order quantity. It is calculated by adding the lead times of all operations, the float before production, and the float after production.
I hope it helps you. Any queries please revert me back.
Regards,
Madhu.G

Production-Time Report

Similar Messages

Maybe you are looking for