Professional 8 - Can't Get Rid of Tab Number In Text Field

Hello,
  I hope someone can help me with this issue - when I create a text field on a PDF document and type text in the field, a "1" appears in the upper left hand corner (it's enclosed in a little black bordered box).  If it was only in the PDF file itself I could deal with it, but unfortunately it shows when I print the document too.  I've got some advice that it's the Tab function in Professional 8, but when I look for a way of turning it off or at least preventing it from showing up in the print, I can't find anything that works.  Adobe support has been no help, there still "looking into it".  I was hoping that perhaps someone has had a similar situation and could shed some light?.....
Thanks!,

Hello Bernd,
  I've attached an example of what's happening though I don't know if you'll be able to view the "1" in the upper left hand corner of the Text Field unless you have similar settings in Professional 8 (just a guessbecause Tech Support at Adobe couldn't see it so I sent a screen shot as well), so I've also attached a screen shot of the bottom of the document where the Text Field is showing the "1" in the corner.
Things I've tried from suggestions made:
1)  You have a tab order in your form turned ON. This is a standard feature of Adobe Acrobat. This is the only way Acrobat will display little numbers in the left-hand corner of the text field. However, tab order should not be visible during printing or entering data. These numbers are only displayed while editing form fields using "Form > Edit Fields in Acrobat...."  - (Which I didn't use to create the Text Field, I used "Tools", "Forms", "Text Field Tool")
2)  "Print" dialog.  Select "Document" under "Comments and Forms" pull-down menu to avoid printing any markup or comments.
I suspect that tab order might get printed for some reason you select anything else besides "Document".  - (I've tried everything is this menu)
3)  1. Open your PDF form. 

Similar Messages

  • How can I get rid of tabbed browsing? I positively hate it and none of the choices in tools get rid of them.

    I was using an older version of FF because the newer versions had messed up private browsing and I had the option of deciding if I wanted tabbed browsing. I switched to a newer version because a lot of sites didn't work with the older version.
    I went into tools - tabs and checked what I used to use not to get tabbed browsing. Doesn't work.
    Please tell me how to get rid of tabbed browsing and how to switch back and forth to private and regular browsing without opening a new tab/window.
    If I can't get rid of tabbed browsing I guess I'll muddle along with an older version.

    Digital_Gaia:
    Note that we don't have anything to do with Firefox development. The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
    If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.
    Also, to avoid this thread turning into a back and forth argument about Firefox's UI, I'll be closing this thread as your initial problem was solved. If you feel the need to open a new thread for a new support request, please do so.

  • How can I get rid of this number even though all apps are updated and installed?

    Weird problem - How can I get rid of this number on top right even though all apps have been updated and installed?

    stamatgeorge wrote:
    Weird problem - How can I get rid of this number on top right even though all apps have been updated and installed?
    That doesn't mean that you have updates.
    Not sure how that app works, - normally means you have a notification for that app - what happen when you go into the app?
    If you had update it would be a red number for the app store icon

  • Can't get rid of the # when adding text

    I'm trying to edit a document in Indesign. I started by doing a Pre-Flight to correct errors and have one left I can't get rid of.
    Originally the Text Error was for a font that ID could not find so I changed the font to what was already being used for other text - an included font - Charlamagne Std Regular
    When trying to type text into a text box the type jumps to just above the text box where the pound sign (#) sits.
    When entering type, even after positioning the curser inside the text box, it jumps the text to right before the pound sign, on top of the text box, and adds a pink box under the text.
    I have attached a screen shot to show this. How to I get rid of the pound sign and pink box to be able to simply type some text in the text box (that the pink box is in)? Thanks!

    @dkg62 – to make clear what's going on, select the text frame and show us another screenshot.
    There are at least four cases where you can get a text like that. All cases imply, that the font you'd like to use is missing. I simulated this by formatting text with a font weight that is not available by a character style.
    1. The most likely case: There is baseline shift applied; here in my case 9pt.
    All other cases are academical, because the pink highlighting is aligned with the text:
    2. Text frame options, baseline set to a fixed value (zero in this case)
    3. Text on path and the text frame options (baseline) is just the standard default. You can see a second #-end of story sign inside the text frame.
    4. Text on path and the text frame options (baseline) is set to fixed (zero in this case). The second #-sign inside the text frame is shifted above because of the fixed value of the baseline option of the text frame options. And obscured by the pink highlighting.
    Uwe

  • How can I get rid of the added / preset  text words included in my text messages.  It always says something like "Please call back at

    How can I get rid of the added / preset  text words included in my text messages.  It always says something like "Please call back at ###-####."

        JenJenTen,
    I understand that having a preset text that you did not want can be a bit frustrating when sending out text. To clarify, is the preset message like a signature at the end of your text? Does this only happen in text messages or when your send emails also? Is your SMS delivery confirmation on? Messaging>Settings>SMS delivery confirmation.
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • How can I get rid of Euro symbol in text?

    Euro symbol show up in front of Copyright symbol when I test it in Internet Explorer but doesn't when I check it in another browser.
    How can I get rid of it?
    Thank you.

    Does it show up in the code?
    If not it's probably a charset in the page encoding that's being misinterpreted by the browser, or a "web-unfriendly" font...
    I try to stick to UTF-8 and avoid any font that isn't in the default list in DW.
    If you have a link to the page online it would help a lot more though. Without that everything I just posted is a guess.

  • How can I get rid of tab groups (not a button, but the feature itself)? Hate it. Thank you.

    I would like to have just tabs without groups, visible all at once, as we had it in previous firefox versions. I don't see any instructions/options. Please help.

    To uninstall Ask Toolbar program from your computer,click the Start button, click on Control Panel,the select Uninstall a program. Search and uninstall Ask Toolbar Updater and Ask Toolbar from your computer.
    Next you want to uninstall Ask from Firefox:
    * At the top of the Firefox window, click the orange Firefox button, then select Add-ons.
    * Select the Extensions tab, then remove Ask Toolbar and any other unknown extensions from Mozilla Firefox.
    * To reset your search engine and homepage to their default, you can use the SearchReset extension.This add-on is very simple: on installation, it backs up and then resets your search preferences and home page to their default values, and then uninstalls itself. This affects the search bar, URL bar searches, and the home page.
    **https://addons.mozilla.org/en-US/firefox/addon/searchreset/
    You can also use [http://www.bleepingcomputer.com/download/adwcleaner/ ADWCleaner] to get rid of Ask's registry keys.
    Use the following scanners to make sure Ask is removed:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]

  • Can we get rid of "redirecting number in IE" message for CER 911 calls?

    Hi There,
    Cisco CUCM version 8.03, CER 8.5, DMS-100 PRI, MGCP configured with "Redirecting number in IE-Outbound" option checked on gateway.
    When we do 911 tests with CER involved, the voice gateway receiving the redirecting number in IE---911 message:
            Calling Party Number i = 0x0081, '4861234567'
                    Plan:Unknown, Type:Unknown
            Called Party Number i = 0x80, '911'
                    Plan:Unknown, Type:Unknown
            Original Called Number i = 0x00000281, '911'
                    Plan:Unknown, Type:Unknown
            Redirecting Number i = 0x000082, '911'
                    Plan:Unknown, Type:Unknown
    The call finally is routed to wrong PSAP with strange CLID displayed on their end, such as 4869110085, and the carrier told us that we are sending 911 as the ANI from their logs.
    But if without CER involved, the gateway has the message:
            Calling Party Number i = 0x0081, '4861234567'
                    Plan:Unknown, Type:Unknown
            Called Party Number i = 0x80, '911'
                    Plan:Unknown, Type:Unknown
    And the call can be correctly routed to the proper PSAP with the right CLID.
    Although on MGCP gateway we can uncheck the option of "Redirecting number in IE-Outbound" to solve the above 911 calls issue with CER involved, unckeck this option may impact other applications.
    Therefore my question is:
    Is there any fix or workaround to have CUCM not send redirecting number information for 911 calls only in MGCP environment?
    Thanks,
    JJ

    Did you ever find a resolution to this?  I'm seeing a similar issue with a carrier masking the calling number with the Bill To Number based on the redirecting field plan being set to "UnKnown".

  • [SOLVED] Can't get rid of a wine-polluted text file icon [KDE]

    Hello folks,
    For some reason, my KDE system likes to use a Wine program based icon for all text files when I'm using a Faenza theme. The problem occurs only for my user (not root) so I think this is an user-specific issue.
    I've already checked .local/share/icons folder for matching icon images. I found one which was named "text-plain.png", being equally the same "W-space" icon image as shown in the picture below. Thus I removed this png file from all necessary subfolders (22, 24, 32, 48...), so as far as I can think, there should not be any traces for the old icon image left. I've already re-checked all folders which I think are relevant to the issue. In addition, I've updated icon cache by using gtk-update-icon-cache and kbuildsycoca4 --noincremental commands. However, the system seems to disagree with me and the annoying icon appears still in text file icons.
    The problem appears practically like in the following picture:
    W-space icon image is very likely related to Adobe Photoshop which I've installed on my PlayonLinux installation (.PlayonLinux/wineprefix/photoshop). I still don't understand by which logic the system decides to use this W-space image for text files.
    I wonder if I need to take further steps to get rid of this annoying icon. Am I missing something? All I want is that KDE would use basic Faenza icon for text files. Any hints are welcome!
    Thank you!
    Last edited by Fincer (2014-09-30 11:30:43)

    Allright, this was, after all, a very simple issue. As expected.
    I simply removed file /var/tmp/kdecache-fincer/icon-cache.kcache, rebooted the system and all icons are fine now.
    Topic marked as solved.
    Last edited by Fincer (2014-09-30 11:30:58)

  • How can I get rid of 'underline' under hyperlinked text?

    In various other apps i've been able to keep the text as hyperlinked, but get rid of the automatic underlining. Can I somehow create a style or set a preference to get iWeb to do this?
    Ben

    There are no style or preferences to allow what you
    want in iWeb. The simplest way around this that I
    found was to create a text box without any borders,
    insert the text you want as a link in that box, then
    select the text box (shows that it's handles
    show) and in the inspector associate the box
    as the hyperlink object. Note, and I stress, the
    hyperlink needs to be the borderless box with the
    text in it, NOT the text itself.
    This seems to be a common issue with several posts in
    which I have suggested this method. Maybe I should
    put up a Web page addressing this issue?
    Please consider marking this reply as either
    "Solved" or "Helpful" with the little buttons in the
    title bar of this reply. This will assist
    others with a similar question in the future.
    I agree with this, I have links on my sites that use this method and it works as it should.

  • IE 6 - I really can't get rid of the 3-pixel text jog

    Hello,
    I'm afrait that's a bit more of the same about the 3-pixel text jog. I'm testing a website in IE6, have spent a whole day trying to figure out how to get rid of this jog, tried various solutions found in this forum and on the web, and nothing works. I don't understand why the zoom property works for most people except me!
    The website is here: http://www.cerc.co.uk/CERC/v02/
    I've put background colors to the main div tags to check the layout, so that's why it looks funny.
    I wouldn't be that bothered with a 3-pixel extra gap between elements if it wasn't turning some page layout upside down. For these pages, the content zone (light blue background) jumps down until the side menu bottom edge (yellow background).
    Examples of the problem:
    http://www.cerc.co.uk/CERC/v02/research.html
    http://www.cerc.co.uk/CERC/v02/support/training.html
    http://www.cerc.co.uk/CERC/v02/about/contact/enquiries.html
    (All other pages will show you how it's meant to be displayed.)
    If someone has an idea, I'd really appreciate to hear about it!
    Emilie
    P.S.: I also attach a screenshot to show what I'm seeing. This is in IE 6 on Windows XP emulated on Mac OS X 10.5 via VMware, so perhaps this problem only occurs with this computer configuration (which would then solve the problem!).

    If that may help anyone, I eventually managed to solve this problem! Here is the solution in "my" case. I thought it was only the 3-pixel text jog problem, but I needed two corrections and therefore I suspect I had two problems mixed—making it a total nightmare to debug for a newbie because the widely documented 3-pixel text jog fix didn't work.
    Context : in this page structure, the elements in trouble in IE 6 are the divs #SideMenu (the side menu, orangish background colour in the attached screenshot)  and #Content (the content area, blueish background colour). #SideMenu is floated left and has a width of 16 em. #Content is not floated and has a left-margin of 16 em (no width, it's supposed to take whatever is left on the page and the page is allowed to extend from 770 pixels to 970 pixels in width).
    Problem: for some pages with this HTML structure (and just nothing fancy inside #Content), the entire #Content div drops down until the top of #Content matches the bottom of #SideMenu.
    I needed two fixes, which I both coded to be for IE6 only using IE conditional comments.
    Fix 1: A new CSS rule for #Content that (re)sets the left margin to 16.5 em. That gives more room to the divs and the entire #Content div isn't dropping down any longer. However, after setting this up, some other pages started to show some problems: part of the content of #Content would drop down (e.g. a table inside #Content).
    Fix 2: applying the zoom: 1 property to #Content fixed this second problem.
    I hope this makes sense and might help someone else.
    Emilie

  • Since upgrading to iOS7 I can't get rid of the number of emails it says I have

    I still can't clear my emails.  They have all been read, but it shows I still have 22 messages.  Going into messages and hitting Edit and then tagging each one isn't the issue.  That didn't help.
    Also, since upgrading to the iOS7 everytime a call comes in it is dropped between 5-15 seconds.  Rather annoying seeing it is a business phone.  Can anyone help?

    Hello Shariann1
    Go to the email messages; click the edit button in the top right corner and you will see a Mark All Button. Click that and you will have the option to Flag or Mark as Read or Unread. Just click that until it shows that everything shows that it has been read and you are good to go.
    iPhone User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Can't get rid of beachball after creating text layers

    Created 7 simple text layers. All was fine till I added simple cross dissolve transition to all layers at once. Now constant beachball. And can't even open any projects after force quitting. In fact as soon as I got to project library and move my mouse I get the beachball.
    Any ideas?

    Try deleting the project render files. Quit FCP X, then lin the Finder locate the folder for your project inside the "Final Cut Projects" folder, then trash the "Render Files" folder inside it. See if that helps.

  • Can't get rid of vertical line in Pages '08

    I add a text box to a blank page and paste in or type in some text.
    There's a verticle line running the height of the paragraph (or single line) that I can't get rid of.
    Also, the text appears blue even though it's supposed to be black. When I select the text and check the color it says it's black.

    Neal Fox wrote:
    OK. Opened a new document and copies with match style. The text comes out right.
    Then I figured I could copy that and paste and match style into the original document. Nope!
    Once it's in the original it comes out blue and with the line.
    If it helps, the original is nothing but jpegs on every page. It's a child's picture book. I'm trying to put the front pages in, which are only text. I didn't copy from the internet, but typed into a text box. No pasting from another document either.
    Thanks.
    Neal,
    When you did the Copy and Paste and Match Style back into the "Original Document", that reverted the style. What you should have done when returning was a straight Paste.
    Jerry

  • How can i get rid of my new added tabs toolbar?

    Suddenly i found i have an extra empty bar at the top of my tabs toolbar, when i right click to ad or remove bars, i realize i have two TABS TOOLBAR, both are ticked, when i remove the tick from one of them it removes itself from the other too and then my tabs toolbar are no visible.
    I don't understand why i have this new empty useless tabs toolbar, and why i can't get rid of it without loosing my normal tabs toolbar?
    this is how it looks like:
    http://gyazo.com/03e09de313d7f198873d7dc6b8bd6ee6
    prntscr.com/3j3fop
    thanks you

    Try to set the browser.tabs.drawInTitlebar pref to true on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config
    If you want to have the window title bar visible then you can find that setting at the bottom of the customize window.
    *3-bar Firefox menu button > Customize > Title Bar

Maybe you are looking for