Profile in Lightrooom 3.6 for Sigma 10-20 mm 1:4-5.6 DC for use on Pentax K5 Camera

When goiing to lens-profiles in Adobe Lightroom 3.6
The Sigma 10-20 1:4-5.6 DC lens is not recognised.
Of the programmed Sigma Lenses a 12-24 mm lens is the most nearby.
Can Adobe create further profiles for the above and other common
used lenses to come with a Lightroom update ?
Or do I have to contact Sigma ?
How to proceed ?
macnesch

Here are the steps I can take to choose a Pentax fit Sigma 10-20/f4-5.6 EX DC on one of my RAW files (from an A77 incidentally but I think I can select any combination of Lens/Camera, as long as the lens profile is somewhere in LR 3.6.
1)  Open the file
2)  Get to the Develop module
3)  Make sure the Lens Corrections section is enabled (near the bottom of the right sidebar)
4)  Click on Profile (not Manual)
5)  Click on Enable Profile Corrections (so the box is ticked)
6)  Make sure set up is Default
7)  Choose Make as Sigma
8)  Choose Model as SIGMA 10-20 F4-5.6 EX DC/HSM
9)  Choose Profile as Adobe (SIGMA 10-20 F4-5.6 EX DC/HSM, PENTAX)
and that's it done!
Perhaps you are following these steps and not seeing the correct profiles in the lists for steps 8 and 9.  This might be the case if you are trying to adjust a JPG file.  I only get a limited list of Sigma lenses for JPG files and I suspect this might be your problem.  If you are trying to adjust a RAW file then I'm not sure how to install the full set of profiles as the Lightroom installation did this for me.
If the JPG is indeed what is causing your problem, I read somewhere that the lens correction files (.LCP files somehere on your computer) are "merely simple XML files" and a RAW profile can be edited to apply to JPG files as well.  However, this is way beyond my level of expertise.  Perhaps there is a thread elsewhere on the forum that explains how to do this....
Good luck!

Similar Messages

  • Change colour profile on export of jpeg for using files on windows pc

    My father, who is 80, has a mac and aperture.
    He is reasonable proficient using it, but as a windows user myself I'm unsure of the in's and out's of things and it always falls on me to help him when he has a problem.
    He also has a windows computer, which he has a programme on for making calenders.
    The problem we have is that when he saves his photo's after editing in aperture to a dvd, he puts this dvd into his windows pc and he cannot see any of the previews.
    On opening up any picture in photoshop on the pc, it asks if he wants to use the embedded colour profile or change it.
    I'm wondering if Aperture is exporting using a certain profile which windows cannot read? Thus doesn't show the preview.
    He needs the preview to pick which pictures he wants to use on the calender.
    He then stores all his pictures on the dvd.
    I'm pretty sure he shoots as jpegs, not raw. Though I need to ask him.
    He has several different cameras, and I think he has trouble with all of them. I'm pretty sure one is a nikon d5300 (I just googled red body nikon)
    Is there a colour profile for aperture when saving as a jpeg that is compatible with windows?
    It's a hundred mile round trip to visit and to then sit down and try to work it out by trial and error would take some time. 
    So if I can find an answer and call on the phone to tell him what to do, it'd save me a lot of time
    I'm not sure what Mac he has, what OS he's using or which version of Aperture, he only recently bought it, so guess at the latest one.......... I know I'm a great help !!!!!
    I can find out if needed, but thought there might be an easy fix....... I know, whenever is there an easy fix for anything!!!
    Cheers,
    Graham

    There is no standard for a 'Preview'. It's a feature of the software that is opening a file as to how it shows those files to the user for selection. Some software will look in the file header for a thumbnail, some will use the files associated icon (if it has one) and some will just present a list of file names. I seriously doubt changing the colour profile output by Aperture will have any impact on this.
    Although Aperture doesn't have a calendar feature, iPhoto does and as of the last year or so, Aperture has an option to open it's library in iPhoto. So if he has a current enough version of Aperture and iPhoto, he could avoid the issue altogether if he is happy to switch into iPhoto to make the Calendar.
    If he wasn't using DVD (say a USB thumbdrive instead) he could run a utility on the PC to create icons for the files where the icon is a thumbnail of the picture, which the calendar software might then use when prompting for images to load. But the use of DVD complicates this, as it depends on the DVD drivers and file systems in use on the DVD.
    Chances of resolving this remotely, remote
    Andy

  • I want to set-up a network with our current two laptops for a family of 4 w/unique 4 profiles. I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e.mail/facebook). How best can I do this?

    I want to set-up a network with our current two laptops for a family of 4 with unique 4 profiles.  I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e. mail/facebook).  How best can I do this?

    iCloud Photo Sharing FAQ - Apple Support
    http://www.fatcatsoftware.com/iplm/Help/accessing%20an%20iphoto%20library%20on%2 0another%20mac.html

  • HT2602 I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?

    I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?

    ebony --
    So, when you open your main Applications folder, there is no Office app there?
    It's in your Users>Applications folder?

  • Mac: With my user profile, it is not possible for me to announce me to the Creative Cloud, with a different user profile, it goes without problems.

    With my user profile, it is not possible for me to announce me to the Creative Cloud, with a different user profile, it goes without problems. Creative Cloud Desktop has been uninstalled and reinstalled. There is no error message.

    john beardsworth wrote:
    John Waller wrote:
    However, Adobe will soon introduce Cloud only features into Lightroom CC for which LR6 (perpetual license) owners will have to wait until LR7 (paid upgrade).
    That is possible, John, but it is only speculation on your part. Might, not will.
    kwdaves wrote:
    There is a "Lightroom 6" upgrade available for US $79 if you have a valid license for any of the earlier versions. From what I can tell, the only difference between Lightroom 6 Full, Lightroom 6 Upgrade and LightroomCC is in the license. The download file is the same.
    Other differences - with CC you get LrMobile/LrWeb and they throw in a free copy of Photoshop too.
    Yes, but when I bought my standalone license and clicked on the "Download" button it took me to the LightroomCC page. The downloaded file is named Lightroom 6, but in the CC app the installed program is LightroomCC (2015).

  • PS: Setting Project Profile as a mandatory field for Project Definition

    Hi,
    I would like to know how to set Project Profile as a mandatory field for Project Definition (CJ20N or CJ01).  I tried to look for controls at OPUK config but the Project Profile is not available for definition - either mandatory, optional, suppressed, etc.  Would appreciate if you can share your expertise on this.
    Thanks!
    Regards,
    Vivian

    Hi,
    I would like to know how to include some additonal fields in OPUK/OPUJ.  We have defined some .INCLUDE component / fields to SAP standard table PRPS/PROJ.  We want those fields to also appear in OPUK/OPUJ so that we could also defined their characteristics - whether input, mandatory, suppressed, etc.
    Thanks!
    Regards,
    Vivian

  • System profiler "information is not available" for PCI cards

    After swapping two cards in their slots, I get the message system profiler "information is not available" for all PCI cards. Mac Pro 4 core 2.66, OS X 4.11 server. The cards are still working. I tried clearing PRAM, etc. Is this a hardware problem or just system profiler being difficult? Is there any way to tell?

    That is a bit odd. Maybe try forcing kextd to run can resolve. You might be working off cached info and it is giving System Profiler a hard time. Run this command and then reboot:
    sudo touch /System/Library/Extensions
    That will update the modify time of the Extensions folder and trick the system into thinking you installed new drivers. This will force an update of the kernel caches when you reboot.
    Not sure it this will do it, but best I could think of.
    Hope it helps.

  • Drawing with a custom profile stroke is not working for me. Does it work for you?

    Drawing with a custom profile stroke is not working for me. Does it work for you?
    I can only apply it on an existing stroke but can't draw a new one with the selected profile. In fact if I change the profile to other than the default Uniform I also can't draw a new stroke with any other width than the default 1 point. This doesn't seem normal.
    Using SC5 on a PC.

    Another question on the same topic.
    Once I add a new profile to the list is it possible to put it on top of the list. I need this because the Adobe people decided to put the list in a tiny scrollable window with only a few of the first profiles showing. If there is noting in the interface may be I have to modify some program files settings?

  • Extension mobility - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone?

    extension mobility  - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone? thanks

    Yes, or simply configure 1 UDP and default device profile for the other one.
    EDIT: and actually with those models, you should be able to use just one
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_011000.html#CUCM_RF_EDCB3C30_00

  • Profile-based Lens Vignette Correction for Nikon 18-200 - Not Even Close!

    Wow. I'm in the process of converting some of my photos from PV2003  to PV2010 and I've been discovering that the profile based lens  vignette corrections for my 18-200 are way off. With a profile setting of  100, I have to add a manual amount of about -40 at a midpoint of 95-ish to even it  out. DxO's correction is perfect without tweaking - so I know its not a peculiarity of my lens.
    PS - The Make, Model, & Profile appear to be correct.
    (I haven't checked my other lenses very closely - but I will be)
    Anybody else?
    Rob

    What kind of filter you got stuck on the end of the lens?

  • Intel 6235 (Low profile vs. non low profile) Which do I need for gt70?

    What's the difference between the two?
    Which would is recommended for a A gt70?

    Low profile is the thinner design for thinnest Ultrabook designs. That is not needed for a full size notebook like GT70.

  • Are latest versions of the firefox disabled for using in poor countries?

    Is it possible to stop wasting of my money without Firefox deleting? Firefox downloads something (I suspect it's "safebrowsing" base) from Google almost continuously. I keep "browser.safebrowsing.enabled" and "browser.safebrowsing.malware.enabled" always false (about:config shows that, but it's not present in "Troubleshooting Information" below. Why?). I use fresh resetted profile. Whether it means that latest versions of the firefox are disabled for using in the rest of the world, where traffic can costs upto $0.3 per Mbyte?
    The article https://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections
    and topic https://support.mozilla.org/en-US/questions/968773 are useless.

    I have not tried Live Http Headers. I'll try. Nethogs shows that firefox suddenly starts consume all bandwidth long time and Wireshark shows encrypted traffic from google network 195.64.213.0/24.
    PS. It's a GGC address.
    PPS. After 6 hours of observation I catched next download, but not catch an initial request. The firefox downloaded near 100MB of binary stuff from 173.194.58.185 (belongs to Google, not has a host name).

  • SQL Server Mgt Studio 2008 installation problem - Key not valid for use in specified state

    I'm setting up SQL Server Management Studio 2008 on my laptop.  It installed fine, but failed to import a regsrver file exported from another machine. This appears to have been due to the fact that I exported the file with usernames and passwords, although I must admit that's pretty darned inconvenient if it can't be done. 
    Nevertheless, I exported the file again without usernames and passwords, but the new install now won't let me even see servers, let alone import any new ones.
    When I start Studio, it gives me the "Key not valid for use in specified state" error.  When I 'continue', I'm delivered to a screen with the 'registered servers' pane crippled.  It has no contents at all and no ability to add, select, import, export.  Nothing there.
    How do I rectify this?
    The installation is on Windows 7 Home Premium.
    Thanks for any suggestions.

    Hi Don,
    Since this issue was still not resolved even after you reinstall SQL Server 2008, I think that this issue is probably related to some corrupted files or registry keys. Please refer to the following steps to see if you can resolve this issue:
    1. Close your SSMS;
    2. Go to the folder %appdata%\Microsoft\Microsoft SQL Server\100\Tools\ and check if there is a Shell folder, if so, rename it to Shell-Copy;
    3. Re-open your SSMS to see if the error persists.
    Everytime SQL Server 2008 Management Studio starts, it will read information from this folder to retrieve and recover some data. If the information does not exists, it will recreate new ones. Please check if this helps.
    Best regards,
    Charles Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help
    To add to Don's comment, if you are using a different account (for example, an SA account) to run SQL Server management studio then make sure to change the user profile name when you browse to "%appdata%\Microsoft\Microsoft SQL Server\100\Tools\".
    I know many of us developers have multiple accounts and I usually have my SA account have logon privileges on databases not my regular AD Account.
    Other than that, the reason why this fails is because MS encrypted the regsrvr file on the source computer using the source computer's ID and is therefore unable to decrypt the file on the destination computer. To me that just doesn't make sense since the
    whole idea of Export and import was to move this information across computers! And that's why this works when you import without username and passwords - no more encryption/decryption. Since we use integrated windows logon (trusted_connection=true) it works
    great. For the few servers that we had SQL Logons I had to manually type them in and save. But all in all, pretty painless.

  • Site behind load balancer - Key not valid for use in specified state

    Hi,
    I have created a sharepoint application page to access an active end point on ADFS and establish a fedauth session. All works well in single server. But when the page runs behind load balancer with 2 servers, it fails with key not valid for use in specified
    state exception. Stickiness is enabled on load balancer. verified that.
    I had made few changes to config file in microsoft.identitymodel section to accomodate adfs custom login. This included removing securitytokenhandlers and issuertokenresolvers as well. Is this impacting the encryption/decryption in anyway?
    Any pointers would help.
    Reference point for my application page : http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=76

    Hi,
    As I understand, you encountered the error “Key not valid for use in specified state” when ADFS custom login.
    In order to run in Windows Azure Web Sites a Web application which uses WIF for handling authentication, you must change the default cookie protection method (DPAPI, not available on Windows Azure Web Sites) to something that will work in a farmed environment
    and with the IIS’ user profile load turned off.
    1. If you are using the Identity and Access Tools for VS2012, just go to the Configuration tab and check the box “Enable Web farm ready cookies”.
    2. If you want to do things by hand, add the following code snippet in your system.identitymodel/identityConfiguration element:
       <securityTokenHandlers>
         <add type="System.IdentityModel.Services.Tokens.MachineKeySessionSecurityTokenHandler, 
                 System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
          <remove type="System.IdentityModel.Tokens.SessionSecurityTokenHandler,
                System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
        </securityTokenHandlers>
    There is a similar case:
    http://stackoverflow.com/questions/19323287/key-not-valid-for-use-in-specified-state-error-for-net-4-5-mvc-4-application
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How can configure weblogic for use Hibernate

    Hello everybody, my question is how can I configureit weblogic for use hibernate.
    I'm using JDeveloper 11g but I did not show any error when I run my jsp page, the page shows me all, but it is as if it never made the connection. the data of my table are empty.
    Thanks for your answers.

    thanks for answer. The jar was wrong, now I get not error, but also does not show me anything on my board ADF. seems to not connect. this is what I get in your log JDeveloper:
    C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
    WLS Start Mode=Development
    CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
    PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Intel\DMIX;C:\Archivos de programa\Java\jdk1.6.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_05"
    Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
    Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xmx512m -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
    <06-02-2009 10:50:27 AM VET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
    C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\antlr-2.7.6.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\asm.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\cglib-2.1.3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-collections-3.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\dom4j-1.6.1.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\hibernate3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jdom.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jta.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jtds-1.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\log4j-1.2.14.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\mysql-connector-java-3.1.7-bin.jar;C:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
    <06-02-2009 10:50:28 AM VET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
    <06-02-2009 10:50:28 AM VET> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
    WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
    WebLogic Server Temporary Patch for CR381265 Wed Oct 08 10:15:58 PDT 2008
    WebLogic Server Temporary Patch for CR380913 Wed Oct 15 13:24:22 PDT 2008
    WebLogic Server Temporary Patch for CR381739 Tue Oct 21 14:06:14 IST 2008
    WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
    <06-02-2009 10:50:29 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <06-02-2009 10:50:29 AM VET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <06-02-2009 10:50:29 AM VET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
    <06-02-2009 10:50:32 AM VET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
    <06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
    <06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <06-02-2009 10:50:38 AM VET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA.mshome.net", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
    <06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
    <06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
    <06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 201.222.105.26:7101 for protocols iiop, t3, ldap, snmp, http.>
    <06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
    <06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    DefaultServer startup time: 16953 ms.
    DefaultServer started.
    [Running application TVB on Server Instance DefaultServer...]
    ---- Deployment started. ---- Feb 6, 2009 10:50:43 AM
    Target platform is (Weblogic 10.3).
    Running dependency analysis...
    2009-02-06 10:50:43.64: Writing WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
    2009-02-06 10:50:43.687: Wrote WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
    2009-02-06 10:50:43.906: Writing EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
    2009-02-06 10:50:43.921: Wrote EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
    Deploying Application...
    <06-02-2009 10:50:47 AM VET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application TVB is not versioned.>
    06-02-2009 10:50:47 AM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
    INFO: Cleaning up application state
    ADF Library non-OC4J post-deployment (millis): 16
    06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
    ADVERTENCIA: A duplicate definition for the feature "AdfDvtGraph" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
    06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
    ADVERTENCIA: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
    06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
    ADVERTENCIA: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
    Application Deployed Successfully.
    Elapsed time for deployment: 26 seconds
    ---- Deployment finished. ---- Feb 6, 2009 10:51:09 AM
    Run startup time: 26766 ms.
    [Application TVB deployed to Server Instance DefaultServer]
    Target URL -- http://127.0.0.1:7101/TVB-TVB-context-root/faces/seguridad/grupo.jspx
    06-02-2009 10:51:17 AM oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
    ADVERTENCIA: ADFc: Sustituyendo la implementación del ciclo de vida de la página de ADF por 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
    06-02-2009 10:51:17 AM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
    INFO: Marco portátil JMX inicializado con el SPI de plataforma "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
    06-02-2009 10:51:17 AM oracle.adfinternal.controller.util.model.AdfmInterface initialize
    INFO: ADFc: BindingContext está presente, utilizando las API de ADFm para DataControlFrames.
    06-02-2009 10:51:17 AM oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider <init>
    INFO: ADFc: Almacenamiento de recursos de metadatos de MDS en la caché del controlador ACTIVADO.
    06-02-2009 10:51:17 AM oracle.adf.controller.internal.metadata.MetadataService$Bootstrap add
    INFO: ADFc: Cargando metadatos de inicialización de '/WEB-INF/adfc-config.xml'.
    thanks in advance for your response.

Maybe you are looking for

  • Problem with image map

    I am trying to create an image map for the map found on my homepage - http://www.smartcharteribiza.com/ I have followed a couple of tutorials and everything seems to be working in photoshop, but when I upload the image to wordpress, the map does not

  • Mms not working to non iPhone contacts since iOS 7?

    Hi there, Hope someone can help me out. Since the upgrade, I can't send any mms to non iPhone contacts. I have contacted my provider and they asked me to configurate my phone and manually put in APN, mmsc, proxy etc... But I can't seem to find it on

  • Trying to write data to a text file using java.io.File

    I am trying to create a text file and write data to it by using java.io.File and . I am using JDeveloper 10.1.3.2.0. When I try run the program I get a java.lang.NullPointerException error. Here is the snippet of code that I believe is calling the cl

  • XI Error ATTRIBUTE_IDOC_RUNTIME.IDOC_ADAPTER: Queue in SMQ2

    Hi XIer's, I have an issue while i am doing an  IDOC-to-IDOC  Scenario The queues have been stucked in the SMQ2 and when i checked the queue it is showing sys-fail and with this Error : "XI Error ATTRIBUTE_IDOC_RUNTIME.IDOC_ADAPTER: Queue ". when i t

  • Adding authorization object for "Function Group"s ?

    Is it possible to add any authorization object for any function group ? We have an issue i.e. whenever user "XYZ" is getting some Windows Excel related error whenever trying call an excel report from BW server. System log related to "XYZ" user shows