'Profile Server Not Available' error when trying to access Profile Manager

Hello all,
I'm totally, totally new to OS X Server, but I have a class full of new iMac's and MacBook's that I want to be able to manage all in one go. Don't really mind about File Sharing, access from anywhere in the world etc. but I just want to be able to push updates to all of them at once as well as manage some default settings for them all.
I've set up most of what I can see I need to do in OS X Server such as the server itself as a .local, Profile Manager, Websites, VPN, Open Directory and Software Update, but when I try to access my .local through any browser, I get the main screen, but get an error page when I try to go into Profile Manager that says 'Profile Server Not Available. Please wait a moment and try again.'
Can anyone suggest where they think I might be going wrong or need to do? I can give more information or screenshots if needed, juts let me know. Any help super appreciated
Yours,
Elliot

Hey,
Sorry, because I'm so new I don't quite get what you mean. A little more information is I'm using my MacBook which is connected to the same WiFi network as the other Mac's. What do you mean by the FQDN?
I'm able to type in the IP address etc. on any other of the Mac's and it loads the 'Welcome to OS X Server' page, it's just when I select Profile Manager, I get the error. Thanks for getting back though, appreciated the quick help.. and I'm still super stuck. I've got a whole day on it today ha.
Elliot

Similar Messages

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Receive a "Server is Not Available" error when trying to connect win 7 pro PC to Windows Server Essentials 2012 R2 Domain via Connector

I am trying to connect Windows 7 Pro 64 bit SP1 Computers to a Windows Server 2012 Essentials R2 domain and I receive the following error: "The server is not available. Try connecting to this computer again, or for more information, see Troubleshoot
connecting computers to the server." I have tried all of the steps in the Microsoft technet article "http://technet.microsoft.com/library/jj635102.aspx" and still am receiving this error. A little background on this specific case...
All of these computers were already attached to a different Windows Server Essentials 2012 R2 domain. They have all been taken off the existing domain and added to a workgroup. I have uninstalled the Server Essentials 2012 Connector and deleted
all log files. Has anyone else had this issue? Any help would be greatly appreciated! This is an urgent issue... Thanks in advance all!

Would you be willing to run this script on your server?
http://gallery.technet.microsoft.com/Windows-Server-Essentials-556159c3
Also on a client to test connectivity?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Mac Os X lion Profile server not available

My Profile Manger appears to start but when I attempt to view the 'Profile Manager' web page to setup devices i have an error "Profile Server Not Available... Please wait a moment and try again'
In the system log I have the following error message repeated over and over agin....:
ruby [11504]: Unable to create ProfileManger log file at 'var/log/devicemgr/profilemanager.log' (No such file or directory)
Is there any solution in the following issue.
Please help as soon as possible

Have tried many of the fixes for web services problems that I have found here, and so far nothing resolves this. I also followed apple's instructions for returning web services to default, and still same problem. Also tried copying default apache files from clean install, resetting web services... and no luck.

Keep getting VncViewer.class not found error when trying to use Windows 7

Greetings,
I have no issue accessing the OVM Manager 2.2 with OEL 5.4 x86_64 with the latest Java release from ULN. But when I use a Windows 7 client ( x86) with the Sun Java 6 Update 18 I get the following error when trying to access the Console of a VM Guest:
Java Plug-in 1.6.0_18
Using JRE version 1.6.0_18-b07 Java HotSpot(TM) Client VM
User home directory = C:\Users\deverej
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
 at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://141.144.112.202:8888/OVS/faces/app/VncViewer/class.class
 at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
 at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
 at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class
I am curious fi I should use only a specifc Java Engine with IE 7 or the latest Firefox browers.

Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17

Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Login error when trying to access iCloud Mail

I am receiving the following error when trying to access iCloud Mail. All other iCloud services are functioning.
IS FATAL
true
APPLICATION NAME
mail
TITLE
Mail could not be loaded
MESSAGE
There was a problem loading the application due to a possible network error or missing resources. Please try again.
LOG
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: MAIL in main()
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.User object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 1: POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: -> entering "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 2: POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <-- Response 2: 0 (72ms), headers: body: (empty)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: Bootstrap error: Preferences.RefreshError
TYPE
server
APP STATECHART
SC.Statechart:sc1030
initialized: true
name: cloudos-statechart
current-states: [
 active.springboard.displayingSpringboard.springboard
state-transition:
 active: false
 suspended: false
handling-event: false
BUILD NUMBER
15B.169e9f7
TIME
Tue Mar 10 2015 07:40:01 GMT-0500 (CDT) (1425991201489)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
DSID
103705688
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: MAIL in main()
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.User object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 1: POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: -> entering "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 2: POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <-- Response 2: 0 (72ms), headers: body: (empty)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: Bootstrap error: Preferences.RefreshError

After activatin iCloud, my dotMac account wouldn't retrieve mail anymore. It kept saying that my username or password were not good. No matter how many times I tried, I couldn't restore the service.
Here's how I got it working again.
Apparently my 6 letter password is no longer acceptable. You need to update it to an 8 letter password that includes numbers and capital letters.
So I went to https://iforgot.apple.com and asked to reset my password.
Because I could still get my emails logging into iCloud with Safari, I responded to Apple's email, and created a stronger password.
Than I updated the passwords on my computer's Mail program, iPhone, and iPad (and of course everything else, iTunes, etc.).
That was it!
Everything works as normal again, I even was finally able to synchronize calendars over different computers again.
Try it out, it could be your issue as well.

404 Error when trying to access ~/public_html

Following the instructions of the Arch wiki on installing LAMP, I get a "404 error Object not found" message when trying to access the public_html which it says should be accessible by default, after giving the correct permissions to the directories for the user http to reach there. I can access it after changing the document root in the /etc/httpd/conf/httpd.conf to point to the folder, but I'm wondering if this is the correct way to do it?
Some extra info:
my /etc/httpd/conf/extra/httpd-userdir.conf file:
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory "/home/anark10n/public_html">
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
<Limit GET POST OPTIONS>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
my home directory permissions:
drwxr-x--x 84 anark10n users 4096 Feb 11 16:01 anark10n
my public_html permissions (with the user http belonging to the respective group):
drwxr-xr-x 2 anark10n users 4096 Feb 11 15:54 public_html
Last edited by anark10n (2013-02-13 05:37:44)

you should be browsing to http://server/~anark10n/

HTTP error when trying to access RESTful web service from application

Hi,
We are getting the following error when trying to access a RESTful web service coming from Apex workspace 4.2.1 and Apex listener 2.1:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-29024: Certificate validation failure
In the Debug report, besides the above I also see:
error_backtrace: ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 543 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 1164 ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 396
We get that error whether we use https or http in the URI pointing to the web service. When I test the Web Service in Workspace RESTful service GUI, I get the data back. When I go build an application with a report calling the RESTful Web Service I get that error. Both the Application and the Workspace RESTful services are on the same Apex environment and even the same workspace.
What is odd is that I can actually put the URL of the web service into a browser and I get the data: (using the demo hr data in sample RESTful services.)
IN browser-- https://weblogic-dev.edu/apex/ace/hr/empinfo/
yields:
7839,KING,PRESIDENT,,1981-11-17T05:00:00Z,5000,,10 7698,BLAKE,MANAGER,7839,1981-05-01T04:00:00Z,2850,,30 7782,CLARK,MANAGER,7839,1981-06-09T04:00:00Z,2450,,10 7566,JONES,MANAGER,7839,1981-04-02T05:00:00Z,2975,,20 7788,SCOTT,ANALYST,7566,1982-12-09T05:00:00Z,3000,,20 7902,FORD,ANALYST,7566,1981-12-03T05:00:00Z,3000,,20 7369,SMITH,CLERK,7902,1980-12-17T05:00:00Z,800,,20 7499,ALLEN,SALESMAN,7698,1981-02-20T05:00:00Z,1600,300,30 7521,WARD,SALESMAN,7698,1981-02-22T05:00:00Z,1250,500,30 7654,MARTIN,SALESMAN,7698,1981-09-28T04:00:00Z,1250,1400,30 7844,TURNER,SALESMAN,7698,1981-09-08T04:00:00Z,1500,0,30 7876,ADAMS,CLERK,7788,1983-01-12T05:00:00Z,1100,,20 7900,JAMES,CLERK,7698,1981-12-03T05:00:00Z,950,,30 7934,MILLER,CLERK,7782,1982-01-23T05:00:00Z,1300,,10
Any ideas on what would be causing the Error above in our application?
Thanks,
Pat
Edited by: patfmnd on Mar 11, 2013 3:25 PM
In reviewing the above error, I think we are realizing that we have to have the Weblogic layer SSL cert (actually the CERT from our BigIP load balancer which also does our SSL termination) imported into the Oracle server wallet where Apex is installed. Am I correct?
PM

We resolved our problem. The Apex Administrative Guide made us realize that we had to set up Wallet path in the Instance. This required working with DBAs to follow the Advanced networking guide to get the wallet set up on our server. We then added that path to the Instance configuration. (Manager Instance --> Instance settings). We ran into another other issue related to our implementation of CAS but were able to resolve that, and 'voila' were able to get the sample RESTful service consumed by our application!!
Now to the task of figuring out how to get Basic Auth working between client application and RESTful web service. If anyone has that working, let us know!!
It would be helpful if in the documentation of the Apex 2.x listener or Apex install/configuration there was clear reference to the above steps required for HTTPS access to RESTful web services.
Pat

Error when trying to access a form through https

Hi,
I'm facing this error when trying to access a form through https, i'm using OAS10g 10.1.2.3 over linux, it has webutil configured and is working perfectly with https
I'm accessing the form through webcache.
the error:
Java Plug-in 1.6.0_37
Usar versión JRE 1.6.0_37-b06 Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Users\Carlos
c: borrar ventana de consola
f: finalizar objetos en la cola de finalización
g: liberación de recursos
h: presentar este mensaje de ayuda
l: volcar lista del cargador de clases
m: imprimir sintaxis de memoria
o: activar registro
q: ocultar consola
r: recargar configuración de norma
s: volcar propiedades del sistema y de despliegue
t: volcar lista de subprocesos
v: volcar pila de subprocesos
x: borrar antememoria del cargador de clases
0-5: establecer nivel de rastreo en <n>
cargar: clase oracle.forms.webutil.common.RegisterWebUtil no encontrada.
java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
 at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
cargar: clase oracle.forms.engine.Main no encontrada.
java.lang.ClassNotFoundException: oracle.forms.engine.Main
 at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.engine.Mainwhat could be the reason it can not find the webutil libraries with https ?? i tried erasing the java's cache but still the same error :(
Regards
Carlos

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Gettign this error when trying to access webpage using JRE V 1.4.2_06

Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Unspecified error when trying to access Control Panel

I am currently setting up Remote Desktop Services on Server 2012 and I have enabled the policy
"Prohibit access to Control Panel and PC settings".
When a user clicks on the Control Panel icon, or anything else that points to Control Panel (Screen Resolution, Personalize) they get the normal error of
"This operation has been cancelled due to restrcitions in effect on this computer. Please contact your system administrator" which is fine and is expected, but they then get the error,
"Unspecified error".
Does anyone know how to fix this?

Hi Tom,
Have you enabled the option to display "Personalization" in Group Policy?
This is because "Personalization" option is linked to Control Panel, so if you prohibit access to control panel, and right click on the desktop select "Personalize", it results in the "Unspecified Error".
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/windowsserver/en-US/76c3f7aa-9189-461e-be4d-5d8af133b151/windows7-explorerexe-generates-unspecified-error-when-trying-to-access-personalize-in-display?forum=winserverGP
Regards,
Gopi
JiJi
Technologies

Unrecognized database format error when trying to access addin to Acrobat reader?

I get an "Unrecognized database format" error when trying to access addin to Acrobat reader so I can use Pro to edit a pdf document? What do I do so that teh ACCESS program aI am generating PDF's from uses Pro and not Reader?
Thanks,
Dan

Adobe Reader and Acrobat Professional are 2 different products. Reader is for free and limited as to what it can do an support.
Add-ins can only use features supported by Reader.
You need Acrobat to edit PDF forms. Acrobat no longer supports access to SQL databases through Acrobat JavaScript.
If you have an add-in and Acrobat can use it for filling a PDF form from Access, you need to talk to the developer to see if it can work with Reader.

After update Firefox keeps returning a "Gone The requested resource /administrator/index.php is no longer available" reponse when trying to access joomla login

After automatic update to 32.2 (then I tried to update to 33.0 beta with no improvement) Firefox keeps returning a "Gone The requested resource /administrator/index.php is no longer available" reponse when trying to access joomla login. The problem is there even when I fill manually the fileds "user" and "password" in the joomla admin login page. The problem appears in different sites on different servers, and do not occurr using Google Chrome. It's clearly a Firefox issue. Could you please give me some ideas on how to solve ?

Works here.
*http://www.centrostellapolare.it/administrator/index.php
Try to disable IPv6 (check for other possible causes as well).
*http://kb.mozillazine.org/Error_loading_websites

'Profile Server Not Available' error when trying to access Profile Manager

Similar Messages

Maybe you are looking for