Profiles and LED

Hi
I have a profile set with notifications so that SMS/MMS recieved blink the red LED, however my email is set to have no blinking LED (with me so far?)
All works ok, if I receive a SMS the LED blinks as expected however if an email then arrives the LED will go off.
How can I adjust it so if there is an unread SMS/MMS the LED will remain blinking?
8520 Curve
OS 5
Cheers
Neil

Hello,
The BlackBerry smartphone will display/playback the last notification setting that is set. Therefore if the email comes in after the SMS message and is set not to have a flashing LED then the LED will not flash after the email has come in.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

Problem with Cisco IPMA - between the manager profile and assistant profile

Greetings to all.
The problem basically is that wen I do a call (internal o external) to the extension configured in the manager phone, the assistant phone dosen`t rings or take the call, even the call in progress dosen`t appears in the Cisco Unified Communications Manager Assistant Console of the Assistant
Also the icons of the IPMA in the manager phone dosen`t appears.
I have check the following:
1.The configurations on both profile and its look ok
2.I have restar the Cisco IPMA, CTI and Tomcat Service
3.I have reconfigured the profiles
What else I can do
What is the most common cause in these cases
Thanks

I have the same problem, did you resolve it ?
Our Customer have about 50 IPMA and there are work. The problem is only with 4 IPMA Assistance (always the same). Sometimes (few times in week) lost Assistance icon Managers, and Managers doesn’t see shared lines, Intercom, services IPMA on phone doesn’t work. But sometimes Assistant icon is showing but Manager don’t see active connection and can’t call via Intercom.
Assistance have 7962 Phone with load cmterm-7942_7962-sccp.9-2-3.cop.sgn
Managers have 7965 Phone with load cmterm-7945_7965-sccp.9-2-3.cop.sgn
CUCM (PUB/SUB) is 8.6.2.20000-2
I opened a TAC case already but the problem is not resolved.

ODI Data Profiling and Data Quality

Hi experts,
Searching about ODI features for data profiling and data quality I found (I think) many ... extensions? for the product, that confuse me. Cause I think there are at least three diferents ways to do data profiling and data quality:
In first place, I found that ODI has out of the box features for data profiling and data quality, but, acording to the paper, this features are too limited.
The second way I found was the product Oracle Data Profiling and Oracle Data Quality for Oracle Data Integrator 11gR1 (11.1.1.3.0) that is in the download page of ODI. Acording to the page, this product extends the existing inline Data Quality and Data profiling features of ODI.
Finally, the third way is Oracle Enterprise Data Quality that is another product that can be integrated to ODI.
I dont know if I understood good my alternatives. But, in fact, I need a general explanation of what ODI offer to do Data Quality and Data profiling. Can you help me to understand this?
Very thanks in advance.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

How to use Device Profiles and Viewing Conditions Profile in Photoshop Elements 11?

In trying to get to grips with the Colour management aspects of PSE11, I have encountered the following problems:
Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management)
gives a screen which includes the headings:
Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers. (I have an Epson Stylus Photo PX810FW).
I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within
PSE11. ("normal" is sRGB or ARGB).
I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.(I suspected this approach because I have never
seen it in the literature!).
So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. Can anyone help? I seek general guidance
rather than the details of the Profiles.
As a seperate question:
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case,
the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
Many thanks to all responders!

Addressing your second question, you are confusing two different things.
tiff is an image file format, as is jpeg, as is psd, as is png, as are dozens (if not hundreds, http://en.wikipedia.org/wiki/Image_file_formats) of other formats.
A colour profile represents the colour characteristics of devices so that, for example, displays know how to display the colours, printers know how to print them.
Image files MAY, but do not have to, contain colour profiles.
For details:
http://help.adobe.com/en_US/creativesuite/cs/using/WS52323996-D045-437d-BD45-04955E987DFB. html
http://en.wikipedia.org/wiki/Color_management#Color_profiles
http://en.wikipedia.org/wiki/ICC_profile
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

After latest update (today), Firefox continually crashes. How can I uninstall this latest update? Tried creating new profiles and they also crash.

Firefox worked earlier today (August 19, 2013 about 6:30 pm EDT). When I opened Firefix after 9pm EDT, Firefox attempted to perform an update. No error was given, but now Firefox will not start. Running a Windows 8 machine with all updates and current security software with no known malware on my system.
When I try to start Firefox, the system shows the "working" circle, but then nothing. I created a new profile, and got Firefox to start, but whenever I try to go to any website, Firefox crashes.
Last 2 crash reports from today:
InstallTime20130814063812 (contents: 1376962029)
LastCrash (contents: 1376969373)

If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the about:crashes page.
*You can open the about:crashes page via the location bar, like you open a website, or open the crash reports page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
Try to start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
You can use one of these to start Firefox in Safe Mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT5787 What do I do if my iPod was stolen and I checked my support profile and when I entered the serial # I got a message saying it has been registered to another Apple ID? Is there a way to find out that Apple ID so that we can locate the iPod?

What should I do if my iPod has been stolen and when I checked my support profile and entered my serial # and I received a message that the serial # had been registered to another Apple ID account? Is there a way to find out the Apple ID that it was registered to? I have already checked find my iPod and it shows my iPod is offline. I have already filed a police report.

No, sorry, there is no way you can get that information. The police perhaps could, but it would probably require a court order and it's unlikely the police will go to those lengths unless they have reason to believe that this theft was not an isolated instance and hence worth more of their time than the single theft of an iPod.
Even if they got the ID, it may well just be yours. Apple's registration database often contains such errors; I get the same message for some of my devices when I know I registered them to my Apple ID and the devices are all still right here.
Regards.

I have created a new profile and copied firefox files from my old computer into it. How do I switch to the new profile, do I just delete the old one?

I am running windows 7 I had to recover my files from an external hard drive when my old computer crashed. I have created a new profiles as outlined in the firefox website and copied all the files into it. I just need to know how to use this new profile when I open firefox, do I just delete the old profile? Or do I have to reinstall firefox.

If you no longer need or intent to use that older profile then you can use the Profile Manager to remove that profile and delete the files.
*http://kb.mozillazine.org/Profile_Manager
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*http://kb.mozillazine.org/Profile_backup

How do I delete my old gamecenter profile and start a new one

How do I delete my old Gamecenter profile and start a new one?

I suggest changing the existing ID rather than creating a new one, all purchases are forever linked to the ID that bought and can never be transferred, you can change all detauils about your ID here:
http://appleid.apple.com
Read this
http://support.apple.com/kb/HT5621

Firefox V33.0 can't find user profile and cant view window content

Hello
I have used Firefox since the old days, wayyy back. Never an issue, always worked, always performed.
My Firefox (v32 I believe), automatically downloaded and applied the v33 browser and immediately, everything went wrong...
First, the browser loaded but the screen was either sheet black or sheet white, then reloading (after closing the window) was informed (only via the window title as all else was block black) that Firefox couldn't see a user profile.
I loaded FF with safe mode and disabled everything (list of addons at the bottom of this post), and the browser loads now and I can see content, but then after only a minute in "safe mode" firefox persistently returned with either a fatal crash or a sudden inability to find the user profile (causing exit).
Reading up about possible workarounds, I eventually managed to export the Profile data (to desktop), to clear the profile data and replace data with desktop copy. Clearing the data took several attempts due to firefox display only showing black or white as stated above, but firefox then couldn't "import" profile as I can't see whats going on in the window.
Eventually manually installed profile data (from desktop automatic copy) to firefox but FF still persisted in crashing to desktop and not displaying correctly if not in Safe mode. I eventually uninstalled firefox and reinstalled from scratch. The reinstall persisted with all the above mentioned issues, I did manually reinstate the FF user profile and crashing to desktop is now rare but does still happen, now it usually happens when Firefox is not the current active window.
Firefox still does not display correctly unless in the "Safe Mode".
Any clues or help or suggestion about why this would happen? Any way I can revert to version 32?
My Addons :
No Services.
Appearance, default only
PLUGINS:
VLC plugin 2.1.3.0
Silverlight plugin 5.1.3
shockwave flash 15.0.0
Quicktime plugin 7.7.5
Java platform SE7 U67 10.
Google Update (disabled)
Adobe Acrobat 11.0.9
EXTENSIONS:
British Dictionary (not compatible with v33!!, disabled)
Colorzilla 2.8.1
cssUpdater 0.5.2 (disabled)
Dust-Me Selector [for CSS] 4.1
Firebug 2.0.3 (and associated FireDiff, FirePHP, EventBug)
enabling / disabling all/any of these does not (so far) change the graphical fault loading Firefox outside of Safe Mode.
Any ideas?
cheers
P.S>As additional info: I have tried the "reset firefox" but this caused numerous little bugs with saving the profile user data. Also reseting did not fix any of the issues.
Everything else on my computer works fine. No virus, no malware (Eset / MWBytes) all other programs fine, and FF was fine until V33!!

Hi for the crashes that are continuing, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
 
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

What are the "Profile" and "Level" Settings in AME?

One thing I never understood is the option for the Profile and Level when I'm exporting a clip in AME. Not sure if those are options for most codecs but it is for the MainConcept H.264 Video Codec. For Profile, there is an option of "Baseline", "Main", and "High". For Level, starting from 3.1 and up, it's 3.1, 3.2, 4.0, 4.1, 4.2, 5.0, 5.1. I don't know what these are and therefore don't know which to choose. I know that the level has something to do with resolution so if I'm exporting in 720p, which level should I choose?
**While on the video encoding topic, in terms of quality, best to worst, what would the order be for the types of bitrates? Is it VBR 2-pass, CBR, then VBR 1-Pass?
-Sorry if this is a bit off-topic for Premiere CS4. There just wasn't any specific location for AME or Video-encoding..

Profiles outline/suggest certain encoding/decoding capabilities of a given video compression standard, like H.264. For example, the High profile enables B-frames and CABAC encoding. Levels are a means of ensuring that a hardware decoder can properly decode a stream. For example, an iPod can play back Baseline profile, Level 3.0 encoded video, but nothing higher. Higher profiles and levels enable other hardware, like Blu-Ray players. For the most part, you can ignore levels when encoding for computer playback, and only concern yourself with profile. I pretty much stick with [email protected]
The link Eddie posted has a ton of information, but here's a good article from Jan Ozer that puts it in more accessible terms.

Profiles and LED

Similar Messages

Maybe you are looking for