Profit center reposting t.code

Hi Gurus
Kindly let me know the process for Profit center reposting (T.code and proces)
Thanks in Advance
Rao
Moderator: Please, search SDN

Hi,
Create a check in OB28 while creating validation that profit center must not be blank.
BSEG-PRCTR NE ' '
Thanks,
Vijay
Edited by: vijay vikram singh on Nov 7, 2011 7:59 PM
Edited by: Rob Burbank on Nov 7, 2011 2:01 PM

Similar Messages

Unable to update profit center or plant code in the customer line item

Hi,
We require the profit center and plant code and division in FI
documents (Posted through billing document or through direct FI entry)
We are unable to input plant or profit center in the customer line item
while using F-21 or any other FI transaction
The plant and profit center is not appearing even in customer line item
in RV document (From SD billing)
We have made the Field status group as optional for the reconcilation
accounts.
Regards
Sembian

Hi
Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
Regards
Neeraj

Determining Profit Center,ECC Co. Code and Controlling Area in CRM campaign

Hi Experts,
My requirement is to capture the Profict Centers, ECC Company Code and the controlling area in CRM Marketing Plans/campaigns. Is it possible? We need to this data to flow to ECC subsequently when we go further with the sales cycle, i.e. Leads, Opp, ECC Quotations, ECC Sales Orders etc.
Can we use Sales Organization with CRM Marketing Plans/Campaigns to get these details therein? Please let me know what are the possible ways of doing that?
Thanks alot in advance.
Regards,
Neeraj

Hi - We have the same requirement. We have PS in ERP. We have run into a issue where the Profit Center and Company code are required, but on the Marketing Plan they are not there, we don't have key figure planning.
Can you provide details on how to enable this via Key Figure Planning.
Thanks,
Manish

Assigining Profit Center to Company Code

What are the settings to be made for assigining profit center to company code?
How to assign the profit center Group to a profit center?
Regards,
Balakishan

Hi,
You dont have to assign a Profit Center to Company Code. Once you have created a controlling area same as Company Code with relevant parameters, all the Cost Centers and Profit Centers are assigned to this Controlling area which is globally assigned to the Company Code. Secondly, you create Profit Center groups seperately through KCH1 and while creating Profit Centers through KE51, you assign
the Profit Center Group under which this Profit Center has to be created. If you want to specifically assign Profit Center to Company Code use KE56.
Sadashivan

Profit center and comapny code missing authorization problem.

Could you help any body,i have some missing authorization problem with profit center and company code,
How to search the roles which having require profit and company code values.
Is there any way to search.
Please let us know very fast.
Thanks in advance

Another, and probably much easier way, is just to use Ctrl + Y... and use subsets of the selections in the SUIM reports.
But I can well understand the temptation to use tables or at least double-check the SUIM output against them.
The bugger with tables is that you can easy make the same mistakes or more than the SUIM reports do, or use old obsolete tables, or incorrect logic when interpreting single fields of the user tables.
Personally, I would normally check the exits first. Developers don't always raise self-explanatory messages...
Cheers,
Julius

Profit center and company code field in Internal order type (KOT2)

Dear Experts,
I want to bydefault profit center and company code in ordertype customization.
Profit center and company code field in Internal order type (KOT2)
regards
RR

Hi
1. Create a Model Order in KOM1
Enter the Comp Code and PC and other fields you want and save it
2. Enter this Model order in your Internal Order Type in KOT2... Transport this change to production client
3. Next time when you create an IO, PC and CC will be populated by default
br, Ajay M

Profit center and project code report

Hello all,
My customer needs a report showing the profit centers and project codes that appear on AP and AR invoices.
It would be something like:
Project Profit Center Profit Loss Difference
and showing the totals for each different project.
Is this possible?
Thank you.
Kind regards,
Pedro Santos

Hello Gordon,
Yes, I think a query report is enough.
What the customer wants is to control the profits/costs in each project.
They will add the project code to every sales and purchase invoices and the profit centers.
Then they need to see which profit centers are with more gain or loss inside the projects.
Do you need more information?

ECCS - Adding Profit Center to Company Code Consolidation

Hello Gurus,
We use ECCS for our consolidation. We do only Legal consolidation and we also use Functional Area as a sub-item category for all the IS accounts. We are now trying to add Profit Center as one of the attributes. Initially, we planned to use the sub-item category, however, we can have only one and it's already taken by Functional Area. Is there a way I can
1. Add PC as an attribute
2. Enhance ECMCT to allow additional Sub-item?
Appreciate your advice and guidance.
Regards,
Venkat

The documentation at the menu path: t-code SPRO > Enterprise Controlling > Consolidation > Add Characteristics states:
Add Characteristics
The SAP standard consolidation database includes various preset characteristics, such as the consolidation unit, the financial statement (FS) item, the subitem, etc. If the information requirements of your group demand additional fields, you can define your own socalled custom characteristics.
This step shows you two ways to add characteristics to the consolidation database:
You can add up to five subassignments to the FS item.
You can add navigation attributes to the characteristic consolidation unit. The system then automatically assigns the same attribute to the characteristics partner unit and investee unit as well.
After adding a characteristic, the system generates the associated ABAP Dictionary objects and maintenance views.
To the consolidation database, you can also add characteristics based on structures that already exist in the SAP system (e.g. Region). However, you can also add characteristics, the structures of which still need to be generated.
Recommendation
Since custom characteristics extend the consolidation database, you should carefully examine which characteristics are to be added. SAP recommends, in particular, that you first finish creating the new characteristics, and that you make sure that want to use this set of data, before you activate the new characteristics and start the generation. This way you can avoid time-consuming deletions if a characteristic must be removed. Also, keep in mind that you can no longer delete a characteristic once you have posted data with the characteristic.
Example
Examples of subassignments for FS items are the Product Group and the Geographic Region.
An example of an attribute for consolidation units is the Company Type.
Standard settings
The standard SAP system already includes the following subassignments for FS items:
Partner unit
Subitem category and subitem
Transaction currency
Acquisition year
Acquisition period
Unit of measure
The standard SAP system already includes the following attributes for the consolidation unit:
Country
Company
Consolidation business area
Profit center
Controlling area
The attributes company, cons business area, profit center and controlling area are particularly useful when you use the integrated collection of reported financial data from your consolidation units.
Activities
1. Reorganize the field catalog. When this is done, the system copies the system field catalog into the customer field catalog. Choose Extras -> Field catalog -> Reorganize.
If you use integrated collection of reported data, during the reorganization you should include SAP's standard attributes in the selection. Note that, initially, these attributes are not included in the Reorganization selection screen.
2. If desired, create one or more new characteristics.
Enter the technical name (field name) of the new characteristic. The technical name must begin with the letters "ZZ".
Also set the appropriate indicator to define how the structure of the characteristic is to be built.
Technical Background Information:
Description, type, and length are properties of characteristics that you can enter directly or define by assigning a data element or domain. Data elements and domains are ABAP Dictionary objects that act as a central store of table field properties:
A data element defines the meaning of a field in business terms with texts and a reference to a domain.
A domain describes the technical properties of the field and defines permissible values for the characteristic if either of the following conditions is met:
- There is a list defining fixed values
- There is a reference to a check table
Normally data element and domain assignments are used to refer to check tables. You can, however, create a characteristic without any validation or texts by assigning a standard domain (for example CHAR07, NUM12).
Ways to create a characteristic:
a) Assigning a data element
Activate this indicator and assign a data element. The domain assignment is made by assigning the data element.
Note: If you run the elimination of IU profit/loss in transferred inventory and the system reads the required additional financial data from the totals database, you need to create the characteristic "product group" and assign it to data element FC_PRGRP.
b) Assigning a domain
Activate this indicator, then specify the meaning and assign a domain. By assigning a domain you define the type and length of the characteristic, and possibly you refer to fixed values or a check table.
c) Referencing a characteristic
Activate this indicator, then specify the description and set a reference to another characteristic. This has the effect of assigning the domain of the referenced characteristic.
d) Creating a characteristic with a new data element and check table
Activate this indicator, the specify the description, type (character or numeric), and length (1-32). The system generates a new check table for the characteristic.
e) Creating a characteristic without a check table (using a standard domain)
Activate this indicator and specify the description, type (character or numeric), and length (1-32). The system does not generate a check table.
Caution: Assigning data elements or domains does not itself ensure that validation, reading characteristic value texts, and Possible Entries Help will work as expected. The following conditions must be given:
The domain must have a check table or fixed values.
There must be either a text table with references to the check table, or the texts must be in the check table itself.
These conditions are always fulfilled by fields in the standard field catalog.
3. If needed, define compound relationships between characteristics in the detail screen of Characteristic Maintenance.
Some characteristics are dependent on other characteristics; that is, the values of dependent characteristics are meaningless in theabsence of values for independent characteristics. Such a relationship is called a characteristic compound. Technically, a check table then contains a key that consists of two parts.
Example: The Region, a dependent characteristic (check table T005S), forms a compound characteristic with the Country, an independent characteristic, because a region can be maintained or interpreted only if a country is specified.
Note the following restrictions when defining compounds:
Compounds can only be defined for characteristics that have a check table.
When a data element/domain is assigned, a compound is predefined by the existing check table.
Compounds can only be defined while creating a dependent characteristic. You do this by specifying the independent characteristic in the detail screen.
Only single compounds are permitted. Multiple compounds cannot be made.
The compound must be defined while creating a new characteristic, and before the new characteristic is saved. This is because the save process generates the check table for the characteristic.
Note: You do not use characteristic compounds to create regular assignments between two fields (such as, consolidation unit A having the local currency USD). Rather, a compound characteristic describes the structural dependency of one field on another (as in FS item 1111 in cons chart of accounts 01 being a different item than FS item 1111 in cons chart of accounts 02).
4. Specify further properties of the characteristic:
Define the display options and the sequence number of the characteristic for reports and so forth.
Activate the Subassignment indicator for all characteristics used as subassignments for FS items.
Activate the Fixed value in breakdown category indicator for all subassignments whose value is determined by the breakdown category (e.g., as with the characteristic subitem category).
Activate the Default value indicator if applicable. Then the characteristic appears in the implementation step Define Default Values. A default value is not necessary and cannot be set if you activate the Fixed value in breakdown category indicator
5. Enhance the checking specifications if needed:
For characteristics without a standard check table, you can enter a text table, a text field, and a long text field. The text fields must use the field type character. You can also specify a view name, usually a view of the check table and text table.
If the system fails to automatically determine the transaction codes for displaying and changing the master data, you can specify them manually.
6. To the characteristic consolidation unit assign any newly created characteristics as an attribute. Only independent characteristics can be assigned as attributes to consolidation units.
These attributes are used for sorting your consolidation units.
Note: Prerequisite for assigning attributes is the reorganization of the field catalog, that is, you need to have copied the field catalog into the customer field catalog. To do this, choose Extras -> Field catalog -> Reorganize.
7. Save and activate the new characteristic.
The Save process stores the new data and, if applicable, creates new tables and views in the ABAP Dictionary.
The Activation process sets the status of the tables, views, data elements, etc. to "active". It also generates the objects that are necessary to enable the consolidation functions to process the new characteristics.
You can activate several characteristics in one step by choosing characteristic maintenance of all characteristics in the initial screen, selecting and activating the inactive characteristics.
8. After activating the characteristic, you are asked whether to generate the view modules. Confirm the generation.
If you exit Characteristic Maintenance and want to ensure that all view modules were generated correctly, choose Environment -> View maintenance modules -> Reorganize.
9. Assign the new characteristics to field groups, if applicable.
Field groups are groupings of characteristics. These let you structure the fields in the field catalog. Individual fields may belong to multiple field groups.
Further notes
Choose Extras -> Log display to display the logs for the activities Save, Activate and Delete.
Edited by: Dan Sullivan on Oct 6, 2011 9:38 AM

Profit center accounting t codes

Hai,
can any one give list of total t codes in co-pca customisation, reporting and during closing process.
madhav

Hi,
Go to SE93 transaction, in search help enter package code 'KE1' - you will receive all relevant EC-PCA transactions.
Regards,
Eli

In ecc.6 version (T code -2KES, profit center accounting , balance carry )

dear experts,
i am akshaya kumar nayak, i have issue regarding balance carry forward on ecc.6 version, (on profit center accounting T. code -2KES,) is it possiable to carry forward, if yes than how ,
please i want to kown, plz you help me , i am the new in sap fico ,(plz give me the solution from the starting to ending procedure,
Thanks&regards,
Akshaya kumar nayak,

Hi Kerstin
Assume you are on ECC 6.0 and you dont create Dummy PC...
If doc splitting is active, you get an error that "PC in Line item XXXX not filled"... System does not look for Dummy PC in that case...
Same behaviour should have been replicated in CRM as well.. Dont you think so?? If I have not activated EC-PCA, I am not supposed to get any error related to Dummy PC... Thats the basic premise of SAP, as far as I know...
When Dummy PC is a feature of EC-PCA, system should look for it only when EC-PCA is active... Though you can say Dummy PC can be created from New GL Menu,, but the basic premise which stil remains is the behaviour is not the same in CRM & Other ECC components like FI, when the PC is not found.... One behaviour is as per EC PCA active and the other is as per New GL PCA active
Anyways, thanks for sharing your knowledge on this,
br, Ajay M

Profit Center 990612 does not exist in Company Code XYZ

Dear Friends,
During the time of posting through t.code F-02 than system is showing the below error :-
Message no Z1008
The Profit Center entered does not exist in this company code.
Enter the correct profiot center which belongs to this company code.
To search for profit center by comapny code, use matchcode type
'Z' - Profit Center by company code and name.
Please advice.
Thanks & Regards,
Pankaj

Hi Pankaj
This message is a Z message, which means your own creation
Go to OB28 and check where have you written the Validation step to check this
Also, check if the PC exists in that comp code or not
br, Ajay M

Profit center assignment in 3KEH does not work

Hello,
I make posting (FB50) to a balance sheet account to which a profit center is assigned in t-code 3KEH (Additional Balance Sheet and P&L Accounts). I do not input any profit center in FB50. As a result of this posting I expect that the line item should be visible on the assigned profit center. Unfortunately this line item is not transferred to Profit Center Accounting - line item is not visible in KE5Z report. But when I input the profit center in FB50 manually, then the line item is visible on the profit center.
Could you please give me advice, what could be the reason that the assignment of profit centers to accounts in t-code 3KEH does not work?
I checked the settings in 1KEF and see that online transfer and line items transfer are allowed in Profit Center Accounting.
Best regards,
Robert

Hi Robert,
If you are using NewGL, you can then use trx. FAGL3KEH to set a default profit center on company code level.
Please read also note 826357. I hope this helps.
Best Regards,
Vanessa.

Profit center field in FIBLFFP- free form payment

Hi,
We need profit center field in the screen of FIBLFFP as it is not present currently in the t code FIBLFFP. We needed this field as New G/l has been implemented and document splitting is active based on the profit center but we have not marked mandatory check for profit center in the current customizing settings. As a consequence for some of the posted transctions involving multiple profit centers we could not see the profit centers in some of the line items in General ledger view. Thus we want to have profit center field in the screen of FIBLFFP so that mandatory check for profit center can be made.
We are using ECC 6.0, any help will be greatly appreciated.
Puneet

Hi,
Have you got any solution to adding cost center or profit center in T-Code FIBLFFP?
Regards,
Abhinav Sethi

Profit center report with cumulative local currency amount

Hi,
I am working to create a report with cumulative local currency .,so that the report data should tally with GL account balance (FS10N).
This report is for balance sheet accounts . Whenever we used to create report with either report painter or drill down report, the option for defining key characteristics is showing only the profit center currency, company code currency or transaction currency.No option for cumulative local currency.
Thanks,
Anitha

Hi Srinu
RPC0 applies to CC reports and not PCA reports
I am surprised by your statement that Summary reports derive values based on Current Fx rate
GLPCA and GLPCT are the tables that are used in line item and Summary reports.. check the value in GLPCT and do they match with GLPCA or not
I am still not convinced about your issue.. Why do you need currency conversion in report?
Assume your comp code curr is USD and Cont Area curr is EUR.. You will be able to see all reports in both currencies without any conversion required during report execution. This is because all the transactions are recorded in these two currencies
Ensure that the All Currencies indicator is turned ON for your contr area
Br. Ajay M

Profit center and profit center group wise profit and loss account

Hi
My name is swetha i have one doubt in ecc 6 version. i need profit & loss account profit center and profit center group wise is it available in sap ecc 6 . Could u please details such kind of informatiion how we will get the p&l report in sap profit center group and profit center with transaction code.
Regards
Swetha

Hi
Please use report
S_ALR_87009712 - Profit Center List: Plan/Actual
Here you can enter the Profit Center Group for which you need the P&L .
Also create a account group which should include all your PL accounts and use the same in the selection of the report.
There are other reports you can try on the same concept.
S_ALR_87009712 - Profit Center List: Plan/Actual
S_ALR_87009726 - Profit Center Group: Plan/Actual/Variance by Origin
S_ALR_87009734 - Profit Center Group: Plan/Plan/Variance
S_ALR_87009717 - Profit Center Group: Quarterly Comparison of Actual Data
Thanks

Profit center reposting t.code

Similar Messages

Maybe you are looking for