Profit Center should not change after copying from Template

Hi,
I have a scenario wherein there is an operative project which has a profit center maintained at the project definition level. I copy the WBS structure on to the 2nd level from a template which has a different profit center maintained at the WBS level. My requirement is that the profit center maintained in the template should remain as it is after i copy the template to the operative project.
As of now after copying the template the profit center changes to the one maintained at the project definition level after i save the operative project. Is there a way by which i can restrict the system from copying the profit center maintained at the project definition level to the 2nd level WBS (which is copied from the template)?
Regards,
Gokul

Hi Mohamed,
Thanks for your response but i already checked that note and it seems that it doesn't cater to my requirement. Presently i am checking with my ABAPer if we can use some user exit and get this done which i think will require considerable amount of time. In case you have any other suggestions please suggest.
@ Abdul Khader : - I already tried all the possibilities using substitution. Would appreciate if you could suggest something else.
Regards,
Gokul

Similar Messages

Profit center document not generated after creating the billing document

Hi,
I have few billing document for which the accounting document is created, but no profit center document got generated. What could be the reason? The profit center is captured at the account assignment tab of sales order as well as at the item level of Invoice and in accouting document too. The only problem is it has not generated the "Profit center document". Pl help. Thanks in advance.

Hi
When you save the billing document then the accounting document and Controlling document gets generated.
A profit center gets captured and it can be used when we check the accounting document. But make sure that for the G/L accounts profit center is assigned and in your controlling area details also profit center is checked.While configuring controlling then the profit center should also be assigned . to the G/L accounts .So kindly check with the help of your FICO consultant wheather proper assignment has been done or not
Regards
Srinath

PR should not change after PO Creation without Unrelease

Hi,
We want that User cann't change the PR after PO Creation.
For Ex.:- We create a PR with 10 Qty., release it and also create PO with 10 Qty.. Now after PO creation with same qty, no one can change PR (Qty, Purchase Group etc...)..
If User Un-release the PO and PR, then user should be able to change in PR...
Please guide...

Thanks a lot dear..
After doing this, i create a new PR and PO with 10 qty... After PO, i unrelease the PR and change the Qty from 10 to 15 nos..then system shows an error message Requisition already converted into purchase order...
But when we change 10 qty to 5 qty, PR allow the same... I want to insert another check here, that user cann't insert less than qty there... There should also be a Message there in system...
Please guide...

PR should not change after PO generation

Dear gurus,
when i create a PR from cj20n/cn22 with qty and rate and do the PO against that PR. Having created PO against the PR system is allowing us change the data in the PR(like Qty, Rate..etc.).but the requirement in my project once the PR is converted into PO system should not allow us to do any changes in the PR. please help us in controlling this.
thanks

This can not be control by user exit. You have to take Abaper's help to disble the screen qty for modify from enhancement provided by SAP in ecc 6.0. If you have lower version then original screen has to be modified taking sap key for modification

Project Definition should not change after releasing

Hi SAP Gurus,
Could anyone please throw some light on the method to disable project definiton field from changing after it has been released..

Hi,
Master data lock can be used with reference to the object selected, by going to editstatus-Lock----- master data, by selecting this, all the data (like fields present with respect that object, excluding cost planning, budgeting, account assignment) pertaining to the object will be locked and you wouldn't be able to make changes to those fields.
Now, coming to automating of this lock can be done through using user status, when you set that user status, all the master data will locked.
Regards
Avisek Bhardwaj

Image Locations Change After Saving from Template

I am using DW CS5. I have made a Template using a dozen or so images. There are four in a side nav bar. When I create a new page (Page from Template), all my images and text show up fine with code like: <img src="images/wedding.jpg"/>. However the two of the four images in the nav bar show the code linking it to its place on my local drive. The other two work fine. I tried publishing the page and the code didn't change. No matter what I try the code will not update for those images.
Any help appreciated.

That worked for that page!
I am ready to make multiple pages from the template. Should I use a different method than "New Page from Template" since that doesn't seem to work properly? I don't want to have to manually apply the template to every page if I don't have to.
Thanks.

PO value should not change after PO history update

Dear Gurus,
I m using release indicator u20186u2019 in my release strategy (i.e. new release will occur only if value increase), but now Iu2019m facing an issue since it gives the provision to decrease the value. So our users have decreased the price after few GRNs. Because of this our inventory has gone up but payment has done for the correct value. I want to know how to block changing of value or quantity after PO history updated. But I should be able to put the delivery complete indicator. Please provide me a solution.
Thanks,
Chameendri

While you cannot achieve this through release strategy configuration as it doesn't look at price reduction, you can try to authorization objects. This solution will involve putting field EKPO-MENGE, EKPO-NETPR & EKPO-PEINH under an authorization object and then assigning it to users who are only allowed to make changes in these fields. For the rest, lack of this authorization object in their user role will prevent them from making any changes.
The disadvantage of this rule is that it prevents increase of price also, given that you have such a requirement I presume that price increases are not so frequent.

Web page composer (wpc) font changes after copy from word

We are using the wpc for publishing news,
I created a font in css and it works fine,
except when I copy some text from word, then he takes the font from word and not the css.
Anybody knows what I can do?
Edited by: Niki Vandersteen on Jul 30, 2009 9:50 AM

Hi,
In WPC, if you are not refering any CSS explicitly, then the WPC refer the default CSS stored at
/etc/wpceditor / css / runtime / ...CSS .
So if you want to keep your styles then either cretae those styles in a seprate CSS file and refer that CSS file.
OR create those styles in the default CSS files and refer those styles for the desired text.
Hope it will help you.
_Vishal

Profit Center is not getting captured in Vendor line item from MIRO.

Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.

Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi.

Schedule lines should not change 3 weeks time from MRP date

Hi
Is there any specific customisation required to get following results in case of schedule lines.
1) MRP should not change/adjust the already send delivery schedule lines which are lying within 3 weeks time from MRP date
2) System should not allow to book the GRN unless the messages / print out has been generated from the system in case of scheduling agreement.
Thanking you
Shantakumar
09944009752

Hi,
There are 2 possibilities:
1. use MRP fixing using planning time fences, this is done by putting the relevant settings in the MRP1 view of the material master
2. use the firming options of the scheduling agreement, these are set per material number that is entered in the scheduling agreement.
The GR can only be posted for schedule lines that have been processed aka output generated.
Regards,

Profit Center is not taken from Material Master

Dear all,
When we post material-related items from SD or MM with link to material/plant (as additional account assginment) then Profit Center is taken from Material Master. But when I manually (FB01 or even FBR2) post similar item with link to material/plant (as additional account assginment) then Profit Center is not taken from Material Master.
Why this happen? How to fix it? We need to derive Profit Centers from Material Master for items that have links to material and posted via FI.

>
Jigar Thakkar wrote:
> Hi,
>
> It will also take effect in FI, as we have defined the same. Status will be 3 (Other transactions + cross-company (orders + billing doc.) for Subsitution in T code 0KEL
>
> Regards,
> Jigar
Just checked this. It's not worked. This subst. not even called (I've checked w/ active Trace).
So, the question is still open. How to derive PCtr from material in manual FI (FB01, FBR2) transactions.

Profit Center does NOT exist on 08/24/2010 (Message KM700)

Hello,
I am using resource related billing.
I am adding a Contract Line Item to an existing contract.
In this Contract Line Item I am entering a wbs element for whichc the associated profit center has an effective date
of 01/01/2011.
The Contract Header has a document date of 08/24/2010
After entering the wbs element in the new contract line and hitting enter I receive the below warning message:
Profit center ###/##### does not exist for 08/24/2010
Message no. KM700
###/##### = Controlling Area/Profit Center
Is there a setting that can be switched off so that the warning is NOT displayed ?
Thanks
Ermanno.

If it is warning message, the user can leave as it is. If it is error then in t.code KE52, you can change the validity period by clicking the change validity period button. Change here validity period from date 08/24/2010, thereby you can avoid this message.
Does this answer your question? If not why you want to remove the warning message? It looks it is standard message, used by more than one program.
Regards,

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Profit Center Field Not deriving during Asset Postings

We are using document splitting functionality with profit center mandatory for any kind of posting.
Scenario-Asset purchase through PO:
1.Purchase Order -created
2.At goods receipt error is coming balancing filed is not filled (bcoz asset is not a material), for materials we are giving profit center. in the asset master i assigned cost center, still profit center is not deriving.
Scenario-Asset Purchase from vendor
purchasing asset directly from vendor through F-90, against asset line item we have to assign profit center. Cost center & profit center is coming in display mode. in the asset master i already maintained cost center, still profit is not deriving.
I already done config for field status asset account number (G067) andPosting Keys (70,75). I also checked note no.684659.
how profit center will be derived for any kind of asset postings.
Thanks
Sai

I think you might be using the account assignment category 'A' in the Purchase order for asset purchase. Please check the IMG for account assignment category thru transaction 'OME9'. For the relevant account assignment category you are using in the PO, tick the checkbox against 'Derive acct.assgt.'
That should solve your problem.
Regards,

Profit center is not appearing in FBL5N t code

Hi Friends,
My business(ECC 6) is posting customer JV in f-02 .he is givivng profit center and costcenter while posting document . After that run FBL5N t code in that list for particular coustomer code profit center is not appearing ....
why it is not appeering in fbl5n.
thanks

Jagadeesh,
You cannot view profit centre in FBL5N for normal open items, as you cannot assign profit centre to a Customer line item i.e. with posting key 01 customer debit.
How ever you are saying that you can view for some special GL transactions. If you can see profit Centre for both the line items you can view in report.
I hope you can assign profit centre to customer line item while posting document.
OB41 - Change field status for posting key 01.
In general you will not assign profit centre to Customer line item. Profit Centre will be assigned to your revenue account.
How ever you can assign profit Centre to customer line items through BAPIs.
Regards,
Praisty

Profit Center should not change after copying from Template

Similar Messages

Maybe you are looking for