Program for deletion of table content.

Hi,
I have a requirement to delete the contents of table RSBERRORLOG , i cannot do it directly from table content delete option due to lack of authorisation. Is there any program that can be used for deletion of tabel contents ?
Thanks .

Hi,
you can delete the RSBERRORLOG table by using the RSBM_ERRORLOG_DELETE report.
Additional info:
You can use the report RSB_ANALYZE_ERRORLOG to analyze which DTPs have created how many single record error messages, and to how many requests these messages are distributed. You can use the report RSBM_ERRORLOG_DELETE for single DTPs to delete the messages for requests up to a specified date.
If numerous single record errors are frequently created for specific DTPs, you should analyze the relevant requests in more detail and, if required, eliminate the error cause (for example, adjusting the transformation routines).
Regards
Andreas

Similar Messages

Deleting DB table contents using internal table

Hi Gurus,
I have a requirement of deleting DB table contents. Requirement is as follows,
User will select the DB table description in the seletion screen using drop down list.
Whichever description he selects,the corresponding table contents should be deleted and we should not hardcode the table name in if or case conditions.
Is this possible?
Regards,
G.Srinivasan

Hi,
You can get the Table name from the desciption from table DD02T.
Use the Key word DELETE to delete the contents of a table from program.
PARAMETERS : p_ddtext type ddtext.
select single * from dd02t into table db_tab where DDLANGUAGE = 'EN' and ddtext = p_ddtext.
DELETE DB_TAB-TABNAME
FROM ITAB. " Take F1 help on this Key word
IMPORTANT --> Do not manually delete the contents of a DB table in SAP.
The individual records only deleted through BDC or any other Acceptable Methods.
Rest is left to you. Be careful about this activity. Take enough Authourizations/ Permissions or consult your BASIS or other team members.
Cheerz
Ram

ITAB_NON_NUMERIC_COMPONENT" in the "generation of scrambling programs for non-cluster tables

Dear Experts,
We have are experiencing issues in standalone scrambling,
we are getting error" ITAB_NON_NUMERIC_COMPONENT" in the "generation of
scrambling programs for non-cluster tables"
Please help with the needful
urgently.
Thanks

Hello,
Implement the following SAP note in the execution system and re-execute the
activity 'Generation of scrambling programs for non-cluster tables' to solve this issue.
SAP NOTE : '1915906 - SAP LT V2 SP06: Dump during program generation'
Regards,
Jerrin Francis

Any program for Deletion the normal Parked documents in Standard SAP

Hi All,
is there any program for delete the normal parked documents in Standard SAP ?? we have nearly 2000 documnets so we can't do manually one by one at FBV2/FBV6.
please help.
Raj

Hi,
You can create a CATT/LSMW project, by recording the relevant transactions and then make a mass change by executing it.
Regards,
Eli

Standalone Program for Accessing MDM Table

Hi,
I am trying access to MDM table using standalone java program but it is giving error. Is it possible?
If it is possible means tell me the steps or post sample codes.
Thanks in advance
Regards
Suresh

Hello:
I have a piece of code here, even tough I believe it would be easier if you could explain a little more about your problem.
First I create properties for connection. I'm using strings however this can be done also setting properties directly:
String server = "MDMServer";
int port = 2005;
String user = "admin";
String password = "thePassword";
String language = "Spanish [MX]"; // languaje and local you want to use
// THen you choose the region and attempt to login. Please note that even tough I choose region US, I log as a MX user, as provided by the language property
CatalogData mdmBridge = new CatalogData();
mdmBridge.SetCodeRegion("English [US]");          mdmBridge.Login(server,port,user,password,language);
// also note that the catalogData object is the main entrance, now create an array for MDMTables:
CMTableInfoArray tables = null;
// and attempt to get them:
AttributeInfoArray fields = mdmBridge.GetLinkedAttributesForTaxonomy("Categories",6,false);
System.out.println("Counts: " + fields.GetCount());
// Traverse:
for (int i = 0; i < fields.GetCount(); i++)
     AttributeInfo att = fields.GetAttributeInfoAt(i);
     System.out.println("NAME: " + att.GetName());
// In this case I'm getting a taxonomy table, such as "Categories". However you could use any other type of tables. Finally I get the contents of this table:
// Attempt to get the categories               A2iStringArray array = new A2iStringArray();
               array.Add("Filter");
ResultSetDefinition rsd = new ResultSetDefinition("Categories");
rsd.AddField("Id");
A2iResultSet rs = mdmBridge.GetRecordsByValue(array,rsd,"Id");
for(int i = 0; i < rs.GetRecordCount(); i++)               {
   Value v = rs.GetValueAt(i,0);
   System.out.println(v.GetStringValue());
Please review the MDM API for java for further info.
I hope that helps
Alejandro

BDC program for rebate with table controls

Hi Friends,
Iam Doing bdc program for Rebate(TCODE VBO1) with table controls..
can u give the solutions for table controls...
if anybody having the code..please send me..
Thanks & Advance,
sampath

hi,
check this example it may help you.
REPORT ZSR_BDC_TBCTRL
        NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
      LIFNR LIKE RF02K-LIFNR,
      KTOKK LIKE RF02K-KTOKK,
      NAME1 LIKE LFA1-NAME1,
      SORTL LIKE LFA1-SORTL,
      LAND1 LIKE LFA1-LAND1,
      SPRAS LIKE LFA1-SPRAS,
      BANKS(6) TYPE C,
      BANKL(17) TYPE C,
      BANKN(19) TYPE C,
      END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
       BANKS LIKE LFBK-BANKS,
       END OF BANKS,
       BEGIN OF BANKL OCCURS 0,
       BANKL LIKE LFBK-BANKL,
       END OF BANKL,
       BEGIN OF BANKN OCCURS 0,
       BANKN LIKE LFBK-BANKN,
       END OF BANKN.
DATA : FLD(20) TYPE C,
       CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'Z:\sr.TXT'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
    REFRESH BDCDATA.
    REFRESH : BANKS,BANKL,BANKN..
    SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
    SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
    SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'RF02K-KTOKK'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                              IT_VEN-LIFNR.
PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                              IT_VEN-KTOKK.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-SPRAS'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                              IT_VEN-NAME1.
PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                              IT_VEN-SORTL.
PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                              IT_VEN-LAND1.
PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                              IT_VEN-SPRAS.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-KUNNR'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKN(02)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
*perform bdc_field       using 'LFBK-BANKS(01)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKS(02)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKL(01)'
                             '10020030'.
*perform bdc_field       using 'LFBK-BANKL(02)'
                             '67270003'.
*perform bdc_field       using 'LFBK-BANKN(01)'
                             '12345'.
*perform bdc_field       using 'LFBK-BANKN(02)'
                             '66666'.
MOVE 1 TO CNT.
    LOOP AT BANKS.
      CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKS-BANKS.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKL.
      CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKL-BANKL.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKN.
      CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKN-BANKN.
      CNT = CNT + 1.
    ENDLOOP.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.&----
*& Report ZSR_BDC_TBCTRL
REPORT ZSR_BDC_TBCTRL
        NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
      LIFNR LIKE RF02K-LIFNR,
      KTOKK LIKE RF02K-KTOKK,
      NAME1 LIKE LFA1-NAME1,
      SORTL LIKE LFA1-SORTL,
      LAND1 LIKE LFA1-LAND1,
      SPRAS LIKE LFA1-SPRAS,
      BANKS(6) TYPE C,
      BANKL(17) TYPE C,
      BANKN(19) TYPE C,
      END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
       BANKS LIKE LFBK-BANKS,
       END OF BANKS,
       BEGIN OF BANKL OCCURS 0,
       BANKL LIKE LFBK-BANKL,
       END OF BANKL,
       BEGIN OF BANKN OCCURS 0,
       BANKN LIKE LFBK-BANKN,
       END OF BANKN.
DATA : FLD(20) TYPE C,
       CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'Z:\sr.TXT'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
    REFRESH BDCDATA.
    REFRESH : BANKS,BANKL,BANKN..
    SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
    SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
    SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'RF02K-KTOKK'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                              IT_VEN-LIFNR.
PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                              IT_VEN-KTOKK.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-SPRAS'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                              IT_VEN-NAME1.
PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                              IT_VEN-SORTL.
PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                              IT_VEN-LAND1.
PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                              IT_VEN-SPRAS.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-KUNNR'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKN(02)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
*perform bdc_field       using 'LFBK-BANKS(01)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKS(02)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKL(01)'
                             '10020030'.
*perform bdc_field       using 'LFBK-BANKL(02)'
                             '67270003'.
*perform bdc_field       using 'LFBK-BANKN(01)'
                             '12345'.
*perform bdc_field       using 'LFBK-BANKN(02)'
                             '66666'.
MOVE 1 TO CNT.
    LOOP AT BANKS.
      CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKS-BANKS.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKL.
      CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKL-BANKL.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKN.
      CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKN-BANKN.
      CNT = CNT + 1.
    ENDLOOP.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.

New extension for deleting Project/Workspace contents

Motivated by Shay's recent posting about JDeveloper extensions, I have developed an add-in that appears on the context menu of Workspaces and Projects and allows the physical deletion of their contents (folders, files) Its usefulness lies on the fact that you don't have to resort to the file explorer to do this kind of job.
A possible enhancement is to remove consequently the Workspace / Project icons as they continue to appear on JDeveloper, even though there are empty of contents and the actual .jpr and .jws files are removed. The workaround is to remove them with the help of the "Remove from..." icon.
The extension is installable as zip file from: http://www.freefilehosting.net/download/NDc3NQ==
Hope you will find it useful,
Serafeim.

Thanks Serafeim.
Here is a code snippet that might help you implement the removal from the application navigator too. (this will go into the end of your handle event method).
Workspace activeWorkspace = Ide.getActiveWorkspace();
activeWorkspace.removeAll();
UpdateMessage.fireChildRemoved(activeWorkspace,activeWorkspace);
Play around with this and see if you can come up with an updated version of the extension.

ABAP Program to delete the WDSO contents from active data table & Manage Re

Hi,
We have requirement where we have to delete the request id from manage screen and data from Active table of WDSO.
I have gone through this weblink where we have to hardcode the DSO name in the table (Deletion of WDSO (Write-optimized DataStore object) Load requests and active table data without deleting it from targetSAPNetworkWeblogs%2528SAPNetworkWeblogs%2529)
Apart from that is there any suggestions or input where i can have selection screen for DSO and execute that will help us to delete the Request IDs and content of active table from WDSO.
Suggestions or input programs really appreciated.
Kindly do the needful.
Regrads,
Prem
Edited by: pannalde on Nov 22, 2011 8:24 AM

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/2d/677b3c513d3311e10000000a114084/content.htm
With program RSSM_DELETE_WO_DSO_REQUESTS it is possible to delete old requests in the Write-Optimized DSO, exactly like we are used to do with PSA requests via a Process Chain.
This program is available as of SAP NetWeaver BW 7.01 SP07. See note 1437407 for details.
You can automate the deletion of old WO requests by using the ABAP program step in the Process Chain.
Regards,
rvc

Function module/ program for deleting Vendor purchasing org. in BBPMAININT?

Hi,
Is there any function module or program available by which i can delete purchasing org. maintained for SRM vendors in BBPMAININT.
Regards
Bharat M

Hi
Please use the Standard SRM function module
*BBPPORG_DELETE*_
to delete the Purchasing organizations ->
Sample code - >
    CALL FUNCTION 'BBP_PORG_DELETE' IN UPDATE TASK
      TABLES
        IT_FRG0060 = LT_FRG0060
        IT_FRG0061 = LT_FRG0061.
    COMMIT WORK.
Hope this will help. Do let me know.
Regards
- Atul

Table control program for updating database table

Does anybody have a sample code for a table control program which can insert/delete/update a database table?
I mean like on the output on table control, if the user insert/delete/update the records, the corresponding records will be updated in database table also.
Appreciate your input.
Thanks.

hi nuren,
TABLES: kna1,knbk.
DATA: v_kunnr LIKE kna1-kunnr.
DATA: v_check TYPE c.
DATA: BEGIN OF it_knbk OCCURS 0,
      banks LIKE knbk-banks,
      bankl LIKE knbk-bankl,
      bankn LIKE knbk-bankn,
      bkont LIKE knbk-bkont,
      koinh LIKE knbk-koinh,
      chk TYPE c,
      END OF it_knbk.
DATA: v_ucomm TYPE sy-ucomm,
      v_dynnr TYPE sy-dynnr.
DATA: l_index TYPE sy-index.
data: count type i.
CONTROLS: tc1 TYPE TABLEVIEW USING SCREEN 0200.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ABC'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE user_command_0100 INPUT.
v_ucomm = sy-ucomm.
CASE v_ucomm.
    WHEN 'DISP' OR 'CHNG'.
      IF v_kunnr <> space.
        SELECT banks
               bankl
               bankn
               bkont
               koinh
               FROM knbk
               INTO TABLE it_knbk
               WHERE kunnr = v_kunnr.
        LEAVE TO SCREEN '0200'.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module MOD_KUNNR INPUT
      text
MODULE mod_kunnr INPUT.
IF NOT v_kunnr IS INITIAL.
    SELECT SINGLE
           kunnr
           FROM kna1
           INTO v_kunnr
           WHERE kunnr = v_kunnr.
    IF sy-subrc <> 0.
      MESSAGE e000(zz) WITH 'INCORRECT CUSTOMER NUMBER'.
    ENDIF.
ENDIF.
IF v_kunnr IS INITIAL.
    MESSAGE e000(zz) WITH 'PLEASE ENTER A VALUE'.
ENDIF.
ENDMODULE.                 " MOD_KUNNR INPUT
*&      Module STATUS_0200 OUTPUT
      text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'ABC1'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module SCREENMOD OUTPUT
      text
MODULE screenmod OUTPUT.
IF v_ucomm = 'DISP'.
    LOOP AT SCREEN.
      screen-input = 0.
      MODIFY SCREEN.
    ENDLOOP.
ELSE."if v_UCOMM = 'CHNG'.
    LOOP AT SCREEN.
        IF screen-group1 = 'G1'.
          screen-input = 0.
        ELSE.
          screen-input = 1.
        ENDIF.
     MODIFY SCREEN.
    ENDLOOP.
endif.
if sy-ucomm = 'INSE'.
loop at screen.
IF ( tc1-current_line <> tc1-lines ).
screen-input = 0.
else.
screen-input = 1.
modify screen.
endif.
endloop.
endif.
ENDMODULE.                 " SCREENMOD OUTPUT
*&      Module EXIT2 INPUT
      text
MODULE exit2 INPUT.
LEAVE TO SCREEN 0.
ENDMODULE.                 " EXIT2 INPUT
*&      Module modify INPUT
      text
MODULE modify INPUT.
      IF v_check = 'X'.
        it_knbk-chk = 'X'.
        MODIFY it_knbk index tc1-current_line.
      ELSE.
        CLEAR it_knbk-chk .
     ENDIF.
ENDMODULE.                 " modify INPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE user_command_0200 INPUT.
v_ucomm = sy-ucomm.
CASE v_ucomm.
    WHEN 'DELE'.
        DELETE it_knbk where chk eq 'X'.
        DESCRIBE TABLE it_knbk LINES tc1-lines.
    WHEN 'INSE'.
      CLEAR it_knbk.
      APPEND it_knbk.
      DESCRIBE TABLE it_knbk LINES tc1-lines.
    WHEN 'LIST'.
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN '0200'.
      WRITE 'Report'.
    WHEN 'BACK'.
      LEAVE TO SCREEN '0100'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module validate INPUT
      text
module validate input.
IF IT_KNBK IS INITIAL.
MESSAGE E000(ZZ) WITH 'A BLANK LINE CANNOT BE SAVED'.
ENDIF.
endmodule.                 " validate INPUT

Interface Program for maintaining a table

Hi Experts,
I am having a requirement,.,cud u please tell me how to proceed.
1. We have a table and maintaining manually.
2. we need a Interface to do it.
3. If i create a record with " Create with a template ..user id and a date field in the table should be disabled to change and others can be changed.
in betwen i need to check some conditions in methods .
after checking this ..the method gives the number of records that are getting affected in the final table.
Please let me know if some one has faced this kind of issue.
Thanks,
Varun

Hi,
generate table view. Own form routines to disable rows or setting defaults values can be added. Pelase refer to SAPDOCU:
ABAP Workbench (BC-DWB)/ BC Extended Applications Function Library / BC Extended Applications Function Library
for details.
Kind regards,
HP

How to delete the Table Contents before inserting records into SQL table ?

Hello Experts,
I have a scenario where in I have to Pick up some records from SAP RFC & insert into SQL table.
i know how to do this scenario but the proble with this is before inserting we first have to ZAP the SQL table & insert a new records. One more twist is The Triggering is happening from SAP side with Sender RFC. If this would have been from SQL Side i could have written a Stored Procedure/ Trigger & could have called this before the SENDER JDBC communciation channel picks up the Triggering event from SQL side.
So how to do this scenarioin XI, First deleting all the Records of SQL table & then inserting the new reocrds. without using the BPM.
Regards,
Umesh

hi umesh,
you can achieve this by writing SQL query in message mapping level..
refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/frameset.htm
regards.

Standard programs for deletion of transaction data over BAPIs

Hello Experts,
What are the pros and cons of using SAP standard programs like /sapapo/rlcdelete etc. over the SAP provided BAPIs (e.g. BAPI_PIRSRVAPS_DELMULTI in case of PIRs). What would be called as best approach when run in regular background jobs for a large number of SKUs.

Hi Ankit,
As per me it should be performed by the using report if it is there like /SAPAPO/RLCDELETE as it is standard program and tested program provided by SAP. BAPI may create preformance issue.
Regards,
R.Brahmankar

Is there a program for deleting a virus

On facebook, there was a posting that went out to my friends that I opened but did not send. Do I now have a virus?

It is not possible to say based on this information if you have a virus or not.
If you do not already have an anti-virus program you should get one now, you should always have an anti-virus program running to protect your computer. There are free anti-virus products available such as:
* [http://www.microsoft.com/security_essentials/default.aspx Microsoft Security Essentials]
* [http://www.comodo.com/home/internet-security/antivirus.php Comodo Antivirus]
* [http://www.avast.com/free-antivirus-download Avast Antivirus]
In addition to always having an anti-virus program running, I also recommend running occasional scans with at least one other anti-malware scanners. Some scanners you can try are:
* [http://www.malwarebytes.org/mbam.php Malwarebytes]
* [http://www.superantispyware.com/ SUPERAntiSpyware]
* [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
* [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender] (not required if you use Microsoft Security Essentials)
* [http://www.safer-networking.org/en/home/index.html Spybot S&D]

Name for deletion of program?

Hi,
Can any one tell me the name of the standard table which is used to delete the program.

Hi Praveen,
In se38 give RSP* and click F4 in that search criteria give delete word you will get 6 programs for deleting various programs.
There might lot of programs for deleting that all depends on the objects,
sample programs
rspc_log_delete
rsp00029
rsp00036
rsp00041
rsp01041
RSBTCDEL - Delete batch jobs
and there can be many more programs.
Hope my answers helps you.
Cheers!!

Program for deletion of table content.

Similar Messages

Maybe you are looking for