Program title in SE38 got deleted while activation

Hi,
I am facing a strange issue. I have maintained program title in the attributes section of the executable report in SE38. This title some times got deleted by itself while activation. This happens only some times not all the time I activated the program.
Please let me know the reason and solution for it.
Thanks in advance.
SHoban

Hi Shoban,
I believe you may have the symptom described in the following SAP Note/Link;
https://service.sap.com/sap/support/notes/1412197
I hope this helps you!
Best of luck,
Derrick Hurley
ABAP Development Workbench
SAP

Similar Messages

My bbm got deleted while i was trying to download bbm 5....

My bbm got deleted while i was trying to download bbm 5.0.when i go to my application list in adv options i can see it there but i cant get an icon to get to it.

Hi there!
I suggest you delete and attempt to re-install BBM.
If that does not work,then please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Voice memos got deleted while synchronising

Hello everyone
I have a small (big) problem.
For the past 8 weeks, I've been recording my lectures with my iPhone 5s. Now that it's vacation, I wanted to re-listen to them all.
My cat however knocked over soda all over my laptop (a HP), it couldn't be saved so...
I got a new laptop. I wanted to synchronize my iPhone to my new laptop, because I didn't really care for the music that was on there, only the voice memos. While it deleted all the audio (which was fine) it also deleted most of the lectures, leaving only 4 recordings! Why it left those 4? No idea, they weren't the oldest, or newest, they were from different times.
Is there a way to restore my voice memos? I have no iCloud back-up, and considering it was the first time synchonising with the new laptop, I don't have any back-up on the laptop either... I tried those restoring softwares, but they all just restore those 4, nothing else.
Please help if you can.

Does anyone know of a way that I can access the voice memos with dates older than my last sync date...?

How can I get my photos and all media back which got deleted while updating software

Helppppp!!!!!!

If you were updating from your comupter then, the computer would have created a backup of the iPad and you will be able to restore you iPad from the same backup.
On the other hand, if you updated your iPad from the the Software Update feature available directly on the iPad, then all might be lost, depending on the following situations:
1)If you were backing up and syncing your iPad from the comupter, you can restore your iPad and restroe with the backup.
2)If you were backing up your iPad on iCloud, you can restore your iPad from that backup by restoring your iPad and when prompted, restore from iCloud Backup.
3)If you were not taking any backups in any form then there is nothing you can do.

Error while activating DSO after loading from another DSO..Production issue

Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandy

sloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy

Error: "Mobile java client attributes not maintained" while activating DO

Hi All,
i got error while activating the Data Object: "Mobile java client attributes not maintained".
how to resolve this error, and why this error is coming?
I am migrating the MI 2.5 application into the MI 7.1 application.In new MI 7.1 application some synbo's are imported using the text file and some new data objects are created. Imported synbo's are activated successfully, but newly created objects are not activated because of the above error.
Can we solve above error or is there any restriction that in Migration project ( project with backward compatibility ) we can't create new Data objects?
Thanks & Regards
Siva Sankar Nulaka.

Hi Siva,
Please refer to following document for the solution.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0036580-ab90-2c10-b7a4-f71ba4f43096&overridelayout=true|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0036580-ab90-2c10-b7a4-f71ba4f43096&overridelayout=true]
It should solve your problem.
Thanks & Regards,
Abhijit

SAPMV45A got deleted. How to find when and by whom

Hi, In our IDES system, the program SAPMV45A was completly got deleted. How can we find when it was deleted. Is there any system log which can be read to find out the date of deletion? Or if any tables which store this kind of data?
Krishna

Hi,
generally it requires the access key to do that.Chk the table TSTC and TADIR FOR its existence or not.
regards,
Nagaraj

Short Dump while activating Transformation through Program

HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
Prasad

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

Why cant i download itunes on my windows 7 pc? i used to have it once but it was not updated for a while and got deleted...i have tried to download it on other web browser but all i got was "thanks for downloaing itunes" and nothing happened

why cant i download itunes on my windows 7 pc? i used to have itunes on my pc once but it was not uploded for a while and got deleted...and now i have tried to download it and all i got was "thanks for download itunes"...after that i have tired to dwnload it from another web browser and ive got the same thing.....!!

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Can't open nor delete an app because it got stuck while downloading, what can I do?

Can't open nor delete an app because it got stuck while downloading, what can I do?

Restart the iPad. The downloading App will dissapear
If it was a purchased App, you'll probably have been charged for it, so it'll be worth trying to re-download.
Let me know if this helps...

How can we delete the programs made in se38?

how can we delete the programs made in se 38?

Hai Mala,
For deleting the programs from the SE38 there is a icon for delete ....... in which you will see the pic of trash bin ....please enter the program name in the text area .... and then you can delete the prgram using that icon also ....you can only delete that program name when the things that you have declared in your program and your program also is not used by other programs.....
please select all the checkboxes to delete all the elements of your program

Today I installed serif photo plus, and got the computer completely crazy, I've uninstalled that program but I can not delete the photo plus toolbar, how I do?

Today I installed serif photo plus, and got the computer completely crazy, I've uninstalled that program but I can not delete the photo plus toolbar, how I do?

There may be an add-on installed for the toolbar. Go to Tools>Add-ons (or about:addons), select Extensions tab and remove the toolbar from there (if it's there)

Substitution activation program error in SE38

Dear Expert,
When I execute the program (RGUGBR00) in SE38 I am getting error like
002 User exit UFP00 not declared in form pool ZGGBS800.
I think some note is missing.
Can anyone let me know above the issue?
Thanks & Regards
Selva

Hi,
For using exit in substitution, you need to make changes in the ZGGBS800 program at 2 places:-
(1) Defination of exit UFP00 in form pool table
(2) Defining the code for this exit UFP00.
So please check this program in SE38. (You can also refer the standard program RGGBS000 for the way to define the exit.)
Also check in V_T80D vie in SM30, whether this program ZGGBS800 is assigned properly or not.
Regards,
SDNer

Error while activating the copy of the standard module

Hi,
I wanted to create a copy of the module material_read_all and so I copied the entire function group.
Now when I am trying to activate it , I am getting syntax error saying that the field does not exist in the global declarations. When I double click on the field name it takes me to another modules of the same function group where the said field is an export parameter.
I cross checked with the standard module and there also no explicit declaration is given. I also tried declaraing the variable again and then activating.But on doing it I got different results from both the modules for the same input and so I had to delete and create it again.
The same thing is happening with other modules also which I am trying to copy.
Can anyone please help me with this.
For copying the function group I entered the main program name in se38 and clicked on copy. It then asked me to copy the modules so I just added 'Z' before the modules to make a duplicate copy.
It is very very urgent.
Thanks in advance
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 11:50 AM

Hi,
I have tried activating all the includes individually and then the main program. But still I am getting the errors. While activating the includes on checking for the syntax error it showed error but on clicking on activating it got activated. But same thing sis not working for the main program.
I also tried with 'activate anyway' but even after that syntax errors are there with the field decalrations.

Error message while activating ODS ZFI_ORD( FI Order Details)

hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
Pooja

Hi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear

Program title in SE38 got deleted while activation

Similar Messages

Maybe you are looking for