Project Closed with a negative amount

Hi Experts,
I need your help, I have a project in which I have a negative amount showed in T.Code CN41 as Ttl Commitment, but I have checked in CJ74/CJ76 and nothing appears. I also run KOB2
Could you help me to fin that negative value.
Regards,
Marcos

Your issue explanation is not quite clear. I think technically system cannot record negative commitment it can be only zero at max.
however it is still possible to Project objects have negative cost get reported in acutal line item report. This normally happens when you are settling in excess of actual.
Information required from your side is
Are you referring commitment or Cost ?
The same is reported on which cost object i.e. WBS, Internal Order etc..
With Regards
Nitin P.

Similar Messages

Negative amount on sales document

Hi ,
Based on the document type of sales document required to be created ,debit credit memo/sales order/credit memo are the different types of business objects.
The FM used to create sales document is SD_SALESDOCUMENT_CREATE.
Requirement : I need to create a sales order with negative amount.
1. when I use the above FM for BUS2096 - I am able to create a negative amounted SD in R3. Perfect
2. when I use the same FM to create BUS2094 / BUS2032 type of SD with a negative amount, the value stored in SD is
changed to a positive value.
Is this a config issue , or do i need to search for any user exits where I could force a negative value for the SD.
Thanks in advance.
Edited by: Thomas Zloch on Mar 11, 2010 4:28 PM - replaced "-ve" by "negative"

I had the same problem, and I would like to answer the solution in case somebody else has same issue.
The problem is related with configuration. If you set up the credit note as a credit note and the item category is not marked as return; the pricing function multiply to -1 changing the amount to negative.
Field: VBAP-SHKZG
Set up the item category as return if the position is related with a credit note (also if it is without stock movement).
Regards,
Jorge Rosa.

Dealing with negative amounts in payment proposal runs in f110

Hi Techies,
In the payment proposal run through f110 transaction is it possible to raise an exception and show the negative amounts seperately?

Dear Ashok,
The scenario is that during the payment proposal run,
if there are two amounts with different due dates, say
10.07.2008     8900 euros to pay
20.07.2008     -800 euros ( the total of the documents at this due date is minus than zero)
Now the program gives one record which says 8100 euros to pay.
But our requirement is that, insted of displaying a single record that adds up the amounts, the negative amount is to be shown seperately like this:
Due date      10.07.2008     8900        euros to pay
Due date     20.07.2008      -800     Exceptions
As this is a standard SAP functiionality, i would like to know any possible ways to achieve this requirement.
Regards,
Madhuri

Cannot create AR Invoice negative amount with WithHolding Tax negative amount via DI API

Hi All,
I tried to create AR Invoice Document via DI API, but with negative amount and negative withholding tax amount.
Document added successfully, but when i open the document in SAP, and i open WTax Table information, withholding tax amount become zero,
Please see image below.
But when i add the same document through SAP Screen, i can fill WTax Amount with negative amount.
SAP Version 9.0 PL 5
Please kindly help,
Thanks
Best Regards
Siddharta

Hello.
If this is different to the behavior of the B1 application it should be considered a bug - like any such difference between DI API and app.
HTH

To prefix an amount with a negative sign

Hi All,
I want to prefix a positive amount with a negative sign...for display...
How will I be able to do that ?
Regards,
Archana

amount = -1 * amount.
if it does not work then you might need to change the type of amount field.
Thanks,
Ram

PE51 - Deduction Wage Type amount showing with a negative "-" sign

Dear All,
We have pay slip configured for the client in PE51 - HR Foms Editor.
Here, we have added the deduction wage types in Window tab and Cumulations tab.
However, when we generate the pay slip, the custom wage types which are defined in deductions show up the amount with a negative " - " sign.
Please advise how this negative sign can be removed.
Please note that in Cumulations tab, under deductions, the MS value against all the deductions wage type is " +"
Regards,
Reema

Hi,
Write a rule to remove the prefix '-' for the WT's for the STD payslip
Regards,
Hemant V.Mahale

Negative amount in sales order

Dear experts,
We are in support project,
ours is order related billing,
we get a error message in a sales order, when we enter a base value is "zero", and add a discount in the same sales order with absolute amount which is a negative value,
this displays a error message as "negative amount is not allowed", then sales order is terminates, we do not able to save the sales order,
however the user forwards me a successful case, the sales order created with negative value and subsequent invoice for that sales order,
when i check it from my side,the same error flows, when i tend to go item level,when i view document floe the sales order and invoice is created.
Please guide me to control this error message.
Regards
baalakrushnan.da

Hi,
In the condition type for price,there is a field for pricing procedure check which pricing procedure is assigned there.In the standard condition PR00 there will be PR0000,check in ur pricing condition,i think the terminating of the sales order and negative value may be bacause of that,or if due to the validity date of the pricing condition.
Regards,
Ramesh.

Reg: Correction of Wrong With holding tax amount Values Posted via BAPI

Hello Experts,
I have posted some invoices using BAPI_ACC_DOCUMENT_POST with With holding tax code and amount now the thing is that ..the document is posted successfully with Wrong With hoding tax amount data in TABLE WITH_ITEM due to this while executing t-code F-53 ( Outgoing payments ) its not calculating the with holding tax amount for the invoice .
Now i wan't to correct ( Negate some values) the values in WITH_ITEM table.....
How am i going to do it..!
Plz..experts help.
Plz waiting for your input

Dear All,
this is not an error but the Standard System Design. Please read the note 611844. Only if You insert manually the WT amounts during the posting You will see them into the WT TAB after the posting. If You make the System to calculate the WT Aamounts automatically, no WT amounts will be reported into MIRO/MIR4. You can see them into the follow on document.
I hope this helps.
Mauri

How do I Credit Note negative amount line item in Invoice

Hi Experts,
I have an AP Invoices that have a negative line item total.
Now that I realize there is something wrong with this AP Invoice, I will like to CN it. But I was stopped by SAP, because I cannot CN a negative amount line item.
Can anyone advice me how can I Credit Note (in any sense) this negative line item?
Much Thanks!
Warmest Regards,
Chinho

Hi Chinho,
I believe this functionality is to be made available in version 8.8. The SAP workaround for 2007 is:
To cancel an invoice with negative line, please use the workaround as
per below:
1. For the rows with the positive Row Total, create an "independent"
Credit Memo (not based on an Invoice).
2. For the rows with the negative Row Total, create another Invoice
with a positive Row Total opposite to the original negative Row,
and reconcile between the two rows manually via Internal
Reconciliations. (This option is available in Banking module in
2005 version and in Business Partner module in 2007 version.)

Sort negative amount in webdynpro ABAP (EHP5)

Hello,
We ahve recently installed EHP5. We are now re-implementing Enterprise Compensation Management (ECM) with the new WebDynpro ABAP MSS iViews.
We have the following issue: one of our column in the compensation planing iView displays positive and negative amounts. the problem is that when we sort this column (ascending or descending), the negative amounts do not appear in the correct order. This is an example how it comes:
6,050.05
7,159.59
8,910.65
8,980.85
1,707.10-
10,110.90
13,644.30
16,645.69
17,135.79
2,013.95-
anyone having the same issue?
Many thanks
Lucas

Hello Lucas,
the numeric content of the relevant columns is interpreted as 'String-like' and sorted in that way, i.e.
the digits of a number are compared to the digits of another number from left to right. This leads to wrong sorting results as the amount of digits a number consists of is not equal for each number within the same column. Usually issues like this occur if the function module which supplies the content marks the column as sortable (COLTYPE = 'SORTABLE' but only table COLUMN_CONTENT is filled. Columns marked as SORTABLE which don't contain content that can be sorted 'straight foreward' by
comparing the characters of one column entry to another from left to right MUST supply a second table SORT_COLUMN_CONTENT which contains the content converted in a sortable way. In your case table SORT_COLUMN_CONTENT must be filled with the numbers enriched with leading zeros, i.e. 000009270000 instead of 92,700.00 which is the 'display value'. please check if correct SORT_COLUMN_CONTENT is provided.
If this is the case,
Otherwise please provide correct SORT_COLUMN_CONTENT Further Information about sorting of columns can be found in the Configuration Guide for the Object- and Dataprovider on the Service Market Place (http://service.sap.com/mss).
Best Regards,
Deepak.

Paymont form via fpl9 for negative amount

Hi,
our customer wants to generate a payment form also when the account balance of the customer is negative.
however, I'm getting an error message that:
Creation of payment form not possible, amount is negative
Message no. >6397
Thanks,
Vered

Hi Vered,
If I'm not mistaken (and I don't think I am ), that message comes from Function module FKK_SAMPLE_0756 - "FI-CA Correspondence - Sample Module for Payment Form Request".
To override this bit of SAP standard logic, to the very least you'd have to program and assign in FQEVENTS own function module (without the check on negative Amount) to FI-CA Event 0756. We don't have payment forms for negative amounts in our system, but I believe it's doable - the rest of standard logic should function OK with negative payment amount.
cheers,
Janis

Negative amount in the open deliveries field

Hi All
Iu2019ve also come across a negative amount in the open deliveries field on the business partners master data screen but there are no open deliveries no orange arrow to click on and it's grayed out for this selected business partner could anybody help with how to fix this issue.
Regards
Ronald

Hi,
Please run the detect query mentioned in the Note No. : 999124 and if it returns and result, you need to open a support ticket on the portal to get the issue investigated.
Kind Regards,
Jitin
SAP Business One Forum Team

Unable to enter a negative amount for payment

I am trying to enter a negative amount for payments under order items, but I keep getting this error message:
"The minimum accepted payment amount for 'Financing' is '0'. Please enter an amount greater than '0' to continue.(SBL-SFS-00167)".
The payment method & type I'm using here is "Financing" & "CareCredit". But, when I enter the payment method & type as "Credit Card" & "Visa", I can enter a negative amount without any errors.
I think this requires some configuration to override. Can anyone help me with this issue?
Thanks,
Raghu

Hi,
It's known bug.
Bug number is 10499290.
Visit/contact oracle support for more information.
Good luck
T.Abed

After Effects CS5 freeze on project load with missing files

Mac with 10.6.4
Open a CS4 project file with missing assets. It opens and converts to a new untitled document. Save the document and close. Open it again and it the application freezes up when loading the last bit of project files. Spinning beach ball forever. No error. It looks to be hitting a few missing files in the project but instead of putting up a "X number of files are missing since you last saved this project" message it locks up.
I tried to open the older file again and find or delete all the missing file references but midway through that process I got the beach ball again. Now it freezes up just loading the older CS4 file.
Any ideas? Much thanks.

Files are on two different external drives, as is the project file itself. What I have done is copy the project file to my internal hard drive, disconnect all external drives, open the file and... it opens. At that point everything is missing, right. But I cleaned up the file, tossed out anything that wasn't totally necessary (this file is two years in the making). I saved it. Leaving it open I plugged the drives back in and started to reconnect the files to their references. I made sure there were no missing files. Closed, quit, and restarted and it worked. I lost a few things but nothing I couldn't rebuild pretty quickly. I suspect one of the reference files was corrupt? Maybe not, because the project file worked in CS4. Maybe a 32bit to 64bit conversion issue? Not sure but I'm back up and running.
Thank you for responding. Hopefully this info will benefit someone else. Twas frustrating. These boards are a great resource.

Cannot create an Invoice with a negative line

I am tring to export an invoice with a negative row and I'm gettign an error here is an examlpe of what I'm doing .
Dim vDrafts As SAPbobsCOM.Documents
     Set vDrafts = vCmp.GetBusinessObject(oDrafts)
    vDrafts.DocObjectCode = oPurchaseInvoices
    vDrafts.CardCode = "2"
    vDrafts.ManualNumber = "222"
    vDrafts.HandWritten = tNO
    vDrafts.DocDate = Now
    vDrafts.DocType = dDocument_Service
    vDrafts.DiscountPercent = CDbl("0")
    vDrafts.Lines.AccountCode = "100000"
    vDrafts.Lines.ItemDescription = "TEST"
    vDrafts.Lines.Price = 123
    vDrafts.Lines.Quantity = 1
    vDrafts.Lines.VatGroup = "6S"
    vDrafts.Lines.DiscountPercent = CDbl("0")
     vDrafts.Lines.Add
    vDrafts.Lines.AccountCode = "100000"
    vDrafts.Lines.ItemDescription = "TEST"
    vDrafts.Lines.Price = -13
    vDrafts.Lines.Quantity = 1
    vDrafts.Lines.VatGroup = "6S"
    vDrafts.Lines.DiscountPercent = CDbl("0")
    RetVal = vDrafts.Add
and if I change to
    vDrafts.Lines.Price = 13
    vDrafts.Lines.Quantity = -1
then the invoice will be exported but the line will be positive .
Do you have any idea on what is wrong .
Thanks

Hi Mohamed,
SBO will not let you set a negative line if the total amount of the document is negative.
It can be done by hand in SBO, so you should be able to get it. Try doing the same as you do it by hand.
I would try something like:
vDrafts.Lines.Quantity = 1
vDrafts.Lines.Price = -13
Hope helps,
Ibai Peñ

Project Closed with a negative amount

Similar Messages

Maybe you are looking for