Project Definition should not change after releasing

Hi SAP Gurus,
Could anyone please throw some light on the method to disable project definiton field from changing after it has been released..

Hi,
   Master data lock can be used with reference to the object selected, by going to editstatus-Lock----- master data, by selecting this, all the data (like fields present with respect that object, excluding cost planning, budgeting, account assignment) pertaining to the object will be locked and you wouldn't be able to make changes to those fields.
Now, coming to automating of this lock can be done through using user status, when you set that user status, all the master data will locked.
Regards
Avisek Bhardwaj

Similar Messages

  • Profit Center should not change after copying from Template

    Hi,
    I have a scenario wherein there is an operative project which has a profit center maintained at the project definition level. I copy the WBS structure on to the 2nd level from a template which has a different profit center maintained at the WBS level. My requirement is that the profit center maintained in the template should remain as it is after i copy the template to the operative project.
    As of now after copying the template the profit center changes to the one maintained at the project definition level after i save the operative project. Is there a way by which i can restrict the system from copying the profit center maintained at the project definition level to the 2nd level WBS (which is copied from the template)?
    Regards,
    Gokul

    Hi Mohamed,
    Thanks for your response but i already checked that note and it seems that it doesn't cater to my requirement. Presently i am checking with my ABAPer if we can use some user exit and get this done which i think will require considerable amount of time. In case you have any other suggestions please suggest.
    @ Abdul Khader : - I already tried all the possibilities using substitution. Would appreciate if you could suggest something else.
    Regards,
    Gokul

  • PR should not change after PO generation

    Dear gurus,
    when i create a PR from  cj20n/cn22 with qty and rate and do the PO against that PR. Having created PO against the PR system is allowing us change the data in the PR(like Qty, Rate..etc.).but the requirement in my project  once the PR is converted into PO system should not allow us to do any changes in the PR. please help us in controlling this.
    thanks

    This can not be control by user exit. You have to take Abaper's help to disble the screen qty for modify from enhancement provided by SAP in ecc 6.0. If you have lower version then original screen has to be modified taking sap key for modification

  • PO value should not change after PO history update

    Dear Gurus,
    I m using release indicator u20186u2019 in my release strategy (i.e. new release will occur only if value increase), but now Iu2019m facing an issue since it gives the provision to decrease the value. So our users have decreased the price after few GRNs. Because of this our inventory has gone up but payment has done for the correct value. I want to know how to block changing of value or quantity after PO history updated. But I should be able to put the delivery complete indicator. Please provide me a solution.
    Thanks,
    Chameendri

    While you cannot achieve this through release strategy configuration as it doesn't look at price reduction, you can try to authorization objects. This solution will involve putting field EKPO-MENGE, EKPO-NETPR & EKPO-PEINH under an authorization object and then assigning it to users who are only allowed to make changes in these fields. For the rest, lack of this authorization object in their user role will prevent them from making any changes.
    The disadvantage of this rule is that it prevents increase of price also, given that you have such a requirement I presume that price increases are not so frequent.

  • PR should not change after PO Creation without Unrelease

    Hi,
    We want that User cann't change the PR after PO Creation.
    For Ex.:- We create a PR with 10 Qty., release it and also create PO with 10 Qty.. Now after PO creation with same qty, no one can change PR (Qty, Purchase Group etc...)..
    If User Un-release the PO and PR, then user should be able to change in PR...
    Please guide...

    Thanks a lot dear..
    After doing this, i create a new PR and PO with 10 qty... After PO, i unrelease the PR and change the Qty from 10 to 15 nos..then system shows an error message Requisition already converted into purchase order...
    But when we change 10 qty to 5 qty, PR allow the same... I want to insert another check here, that user cann't insert less than qty there... There should also be a Message there in system...
    Please guide...

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • PO Qty should not Amended after GR

    Hi friends
    i have to do PO Qty should not Amended after GR finished . IS there any BADI Enhancements points please let me know i guess
    this is BADI ME_PO_PRICING_CUST  i have tried it but it is not working for me or i missing some thing .please give suggestions what i need to do .And  the same time  there is also  required for particular user it should be allow to change
    REgards
    Rk

    Hi when GR is done and it is allowing to change it comes under PO amendment
    ask functional if amendment can be stopped
    regards
    m.a

  • Purchase order changes after release

    Hi,
    How can I block a purchase order to any changes after release it and then, in case of need, mark for deletion the purchase order itens?
    Regards,
    Maria

    Hi,
    To block any changes in the purchase order to after release, set Changeability  indicator as 1 for  Release ID "R" in following path & save.:
    SPRO ->MM - Purchasing -> PO -> Rlease Procedure for PO -> Define Release for PO -> Release Indicator
    NOTE:If you set  Changeability  indicator as 3, PO can be changed after release and trigger a  new release strategy based on value changes.
    Regards,
    Biju K

  • MIGO should not create after PO Delivery Date

    Hi,
    We have a PO with multiple line items and diff. Delivery Dates...
    We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
    Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
    Please suggest.

    If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
    Just put the same date as delivery date in this field. Then  system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
    You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
    Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
    **Edited by: Dëv Päträ

  • Po should not editable after grn

    Dear All
    My clint wants po should not editable after grn.
    pls help

    Hi,
    you can use user exit : EXIT_SAPMM06E_016
    Following Logic can be use:
    1. Validate the company code (BUKRS ) & Purchasing document type (BSART = F) from EKKO table for the Purchase order number (EBELN).
    2. Check the entries for the Purchase order and the item number in the Purchase order history table ( EKBE) and also Validate if there is no reversal document for goods receipt ..
    3. If we find GR doc in EKBE table with out reversal documents then display the warning or error message as POP - UP by using functional module POPUP_TO_CONFIRM.
    Step 1: Validate Company code and Purchasing Document type from EKKO table
    Step 2: Check the Purchasing document history from EKBE table
    Step 3: Check whether any reversal made for goods receipt.
    Step 4: Display popup message to user:
    Use the function module u201CPOPUP_TO_CONFIRMu201D to display the below message u201CThe PO has been already Receipted. Before changing PO please take care about GR document reversalu201D.
    Regards,
    Vikas

  • Schedule lines should not change 3 weeks time from MRP date

    Hi
    Is there any specific customisation required to get following results in case of schedule lines.
    1) MRP should not change/adjust the already send delivery schedule lines  which are lying within 3 weeks time from MRP date
    2) System should not allow to book the GRN unless the messages / print out has been generated from the system in case of scheduling agreement.
    Thanking you
    Shantakumar
    09944009752

    Hi,
    There are 2 possibilities:
         1. use MRP fixing using planning time fences, this is done by putting the relevant settings in the MRP1 view of the material master
         2. use the firming options of the scheduling agreement, these are set per material number that is entered in the scheduling agreement.
    The GR can only be posted for schedule lines that have been processed aka output generated.
    Regards,

  • Po header change after release

    Dear All
    We require list of PO for last one month PO header or tiem level text has been changed after release
    Regards
    Dishant

    Hi,
    You can use the following report to get you all the changes in PO. Ask your ABAP person to run it for you.
    http://www.sap-img.com/mm001.htm
    It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
    Hope it helps,
    Best regards
    Amit Bakshi

  • Purchase order printout should not happen without release of PO

    I have made all the settings for PO release strategy and printout settings. But printout can be taken even before final release. I checked the settings and this printout should not happen before release. Please help me out.
    Thanks in advance.

    Hi,
    Thank ypu for your reply. PO was not released. Printout wa snot able to be taken in ME9F. But Printout can be taken using Print preview in Tcode ME22N. Can we avoid such printing using Print preview option.
    Thank you in advance

  • PR from MRP should not go to Release

    Dear All,
    How to control that PR generated from MRP Run should not go to Release Process.
    Regards,
    Pardeep Mlaik

    Hi,
    Have a concept always that to keep two document types of PR ieu2026u2026one is document type of manual PR & another document type for MRP PR document type .Now   link plant, MRP group & MRP PR document type in OMDT t.code & maintain the MRP group in the MRP 1 view of the material master.
    Do not keep value of MRP PR document type   in release characteristic of document type of PR. So when you design your release strategy, you would not have option to select MRP PR document type.
    Now when system will create MRP PR, you just view the MRP PR with no release TAB.
    Regards,
    Biju K

  • PR Item Level Release WF not working after Release Strategy change

    Hi Experts,
               I did PR item Level Release Standard Work flow and it was working fine now due to client requirement we changed the release strategy and now when the PR workflow triggers it gives the Below mentioned error.
    I really don't understand y after changing the release strategy workflow is not working and giving the following error.
    Even if i restart the workflow in SWPR the same error is occuring.
    Exception occurred    - Error when starting work item 000000390118
    PROCESS_NODE     - Error when processing node '0000000003' (ParForEach index 000000)
    CREATE                   -  Error when creating a component of type 'Step'
    CREATE_VIA_WFM  -  Agent determination for step '0000000003' failed
    EVALUATE_AGENT_VIA_RULE - Error in resolution of rule 'AC00000148' for step '0000000003'
    AC00000148             -  Object type 'TS' not valid
    Executing flow work item   - Work item 000000390118: Object FLOWITEM method EXECUTE cannot        be executed
    Executing flow work item   - Error when processing node '0000000003' (ParForEach index 000000)
    Regards,
    Hari

    Hello Hari,
    please set a breakpoint at function module
    ME_REL_GET_RESPONSIBLE
    and see what happends in section
        CASE t16fc-frgwf.
    * keine Ermittlung
          WHEN space.
            RAISE nobody_found.
    * Ermittlung über T16fW
          WHEN '1'.
    If using the T16FW-table, it should go to '1', otherwise it may that a user exit under '9' is used. So please check this.
    Best wishes,
    Florin

Maybe you are looking for

  • VERY slow data transfer to my hard drive attached to the Airport Extreme

    Hi Ive got a Macbook Pro and Mac Pro. In order to access large files from both I got a 2TB drive connected to my Airport Extreme and it shows up fine in both Macs under SHARED. When I copy files from and to that harddrive from my Macbook Pro its impr

  • [SOLVED] kde 4.1 and Quanta+

    Since my last upgrade and switch to kde4.1 (it's really awesome) I'm on the verge of panicking since Quanta+ suddenly disappeared. How do I get it back? I realize from other forum posts that certian development libraries have been postponed until 4.2

  • Opticarc BD ROM BC-5500S ATA Device Help

    I have a laptop with an Opticarc BD ROM bc-5500s ata device.  The problem is the drive fails to recognizes inserted disks with data.  I've contacted HP and they provided the following trouble shooting solutions. 1.      Power drain. 2.      Check for

  • Invalid execution GUID. Work item could not be completed.

    Hi People, Lately, users have been complaining a lot of Invalid execution GUID. Work item could not be completed. What does it mean exactly, in a general sense, as I know it depends on the error. But what is the general consensus of such an occurence

  • Transport System - Configure to automatically import Dev transports to QA

    Hi, Does anyone know the steps involved in automating the Tranport System to automatically import transports to QA once released in Dev? Many thanks, Marie