Project is dropping audio and connections after burning

A project was created on an Intel machine running Tiger, then modified with all new assets on a PowerPC G5 with Tiger (10.4.11). When burned to disc, some menu audio is missing, and some connections (button links, menu timeouts) are non-functional. This has happened before and the solution has been:
1) Delete all the PAR files on the PowerPC
2) Copy the project file to the Intel machine (now running Leopard)
3) Build and burn the project.
This is not working, nor is deleting and re-creating the offending menus. Short of rebuiliding this numbingly complex project, does anyone have a clue as to how to solve this or why this would be happening?
Disc functions perfectly in Simulator and Mac's software DVD Player; only the burned disc drops features. Both machines are running the newest version of DVDSP 4 (newer than the DVDSP 4 version that created the project file).

I started getting this exact problem when playing The Crew with my ZXR card. Audio channels start going to the wrong outputs within 5 minutes of playing the game every time. I ran the channel test after playing and stopping the game and they were still screwed up. After rebooting the PC, the problem is fixed again.
This is the first game I have noticed this problem with. This is the first game that has been this demanding on my PC and graphics cards (SLI, both running at 100% to a 4K monitor). I am wondering if the PCI bus is getting hammered too hard.
I have ordered a Sound Blaster X7 to see if the problem goes away. If not, I will be sending that back and going back to onboard audio.

Similar Messages

  • MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

    MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
    This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
    After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
    Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
    1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
    2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
    sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
    This will allow you to simply type “airport” in the terminal window to execute the command.
    Type airport –s
    This will display all the networks in your area and what channel they are broadcasting on.
    3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
    The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
    4.) Boot your Mac into safe mode by holding down the shift key while booting.
    5.) Open System Preferences and Click on Network.
    6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
    7.) Create a new location by clicking the + and give it a new name.
    8.) Delete the old location by clicking on the old locations name and click the – to remove.
    9.) Reboot
    10.) Open System Preference and click on Network.
    11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
    12.) Drag Airport to the top of the list of devices then click Ok.
    Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
    13.) Click on Advanced under Network.
    14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
    15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
    16.) Click on the drop down for Configure IPv6 and change it to Off.
    17.) Next click on the DNS tab at the top.
    18.) Click the + to add a DNS Record.
    To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
    Then Type cat /etc/resolv.conf
    (There is a space between cat and /. Without it you’ll get no such file or directory.)
    This should return two addresses. Your ISP’s DNS Servers.
    19.) Add both records to the DNS and click Ok.
    20.) Click Ok then under Network Click Ok.
    21.) Reboot router then Mac
    22.) Fixed my connection issue
    The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
    I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
    Let me know if this helps or if you have any questions.
    Best of luck.
    Message was edited by: erockdabass
    Message was edited by: erockdabass

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • MacBook Pro drops Wi-Fi connection after upgrading to 10.7.4

    Hi
    My MacBook pro Mid 2010 i7 start do drop Wi-Fi connection after i uppgradet Os X Lion from 10.7.3 too 10.7.4.
    The behavior is that the network is working for a while but suddenly is Wi-Fi Signal Status completely empty. I need to go in and select the network again. Often loses MBP Wi-Fi directly, but the third time will keep the MBP signal until I restart the computer, then precessen same again.
    I have tried is to delete the network and add the network for OS X also resetar (Netgear WNDR3700), and no help
    Does anyone know what to do?

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • My macbook, OS 6.7, drops my wireless connection after about 10 minutes - help?

    My macbook, OS 6.7, drops my wireless connection after about 10 minutes - help? The lynksys signal works on other computers/iphone but not on my older macbook.

    Same problem, IMac with OSX. Everything else in the house is fine - Netfilx, pc's, radios - Mac drops the wireless after a few minutes. It sits closest to the router. Imac will be OutMac soon if no solution comes along.

  • IPad drops L2TP VPN connection after 1 minute??

    IPad drops L2TP VPN connection after 1 minute of no activity? I'm connected just fine to my sonicwall FW.

    IPad drops L2TP VPN connection after 1 minute of no activity? I'm connected just fine to my sonicwall FW.

  • IChat will not audio/video connect after first attempt

    Hi all, this is my first time at posting on any discussion site so please excuses my ignorance, and thank you in advance for any help you see fit to give me.
    I have had a good look through all the posts here and a good search through the web to find help as well as a 3 hour call to Apple! Still no luck yet, please help!! I come across similar problems but this seem to be a bit different?
    I am trying to connect to my family using iChat 4.0. The set up at my end is the same as my family. We both purchased at the same time in December new 24"iMac's 2.8GHz running Leopard 10.5.1. The imacs are connected via ethernet cable to new Apple Airport extremes, the new style ones. in turn the extremes are connected to new M3 X-modems then to our broadband internet connection wall sockets. We both use Zen internet as our ISP. We both have .mac full accounts
    We have both used ichat before on our old iMacs/router set up using 10.4 and ichat 3 without any problems, that was via the same ISP and at the same locations.
    We have connected to each other using Text without problems and have connected via video chat the first time we used the new set up and also some of the times when we make changes to some settings some where within the ichat or prefs settings, but only the once then it stops working. But it stops there. Most of the time we cannot connect at all apart from text. We have tried many things at both ends on the connection using all the leads I have found in these posts as well as the things Apple told me to do, but no luck.
    So far I have tried it with the Leopard firewall off (allowing all incoming connections) and also on with iChat listed as one of the apps. (this was done after the update to 10.5.1 as this update was out before we purchased the macs so it was install from day one once we started up) I have turn off the .mac encryption at both ends and on. I have set the Quicktime stream speed to the '1.5Mbps T1/ Setting' and also set the iChat Bandwidth limit to 1Mbps as well as none and other speeds. Plus other changes on the Airport extreme as instructed by Apple all of which failed and I ended up back with the original setting (after losing all internet access at one point!).
    When we try and connect via anything other than text, it starts off by trying to connect then after about 15 secs or so we both get a message at each end of the connection saying.......
    +There was a communication error during your iChat.+
    +Did not receive a respone from (our names). You can send details about this problem to apple to help improve future versions of iChat+
    Details
    +Don't Send Sent to Apple+
    The details section contains the following..... (I have replaced where my mac e-mail address would sit with (+++++)
    Date/Time: 2008-01-03 18:53:15.279 +0000
    OS Version: 10.5.1 (Build 9B18)
    Report Version: 4
    iChat Connection Log:
    2008-01-03 18:52:43 +0000: AVChat started with ID 2717944341.
    2008-01-03 18:52:43 +0000: (+++++)1: State change from AVChatNoState to AVChatStateWaiting.
    2008-01-03 18:52:43 +0000: 0x18aee740: State change from AVChatNoState to AVChatStateInvited.
    2008-01-03 18:52:48 +0000: 0x18aee740: State change from AVChatStateInvited to AVChatStateConnecting.
    2008-01-03 18:52:48 +0000: (+++++)1: State change from AVChatStateWaiting to AVChatStateConnecting.
    2008-01-03 18:53:01 +0000: 0x18aee740: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 18:53:01 +0000: 0x18aee740: Error -8 (Did not receive a response from 0x18aee740.)
    2008-01-03 18:53:01 +0000: (+++++)1: State change from AVChatStateConnecting to AVChatStateEnded.
    2008-01-03 18:53:01 +0000: (+++++)1: Error -8 (Did not receive a response from 0x18aee740.)
    Video Conference Error Report:
    7.561392 @SIP/SIP.c:2719 type=4 (900A0015/2)
    [SIPConnectIPPort failed]
    Video Conference Support Report:
    0.341012 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
    [Connection Data for call id: 1 returns 1
    5.001277 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
    [Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
    5.015026 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
    [Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
    5.560358 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@[rip]:16402 SIP/2.0
    Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK324adc9245ffbda5
    Max-Forwards: 70
    To: "u0" <sip:user@[rip]:16402>
    From: "0" <sip:user@[lip]:16402>;tag=1028680691
    Call-ID: 1452b6ae-ba2d-11dc-b315-c8edfa8e4012@254-179-33-3
    CSeq: 1 INVITE
    Contact: <sip:user@[lip]:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 781
    v=0
    o=James 0 0 IN IP6 lip
    s=0
    c=IN IP6 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2800
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2018669853
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:3535381580
    6.060792 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@[rip]:16402 SIP/2.0
    Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK324adc9245ffbda5
    Max-Forwards: 70
    To: "u0" <sip:user@[rip]:16402>
    From: "0" <sip:user@[lip]:16402>;tag=1028680691
    Call-ID: 1452b6ae-ba2d-11dc-b315-c8edfa8e4012@254-179-33-3
    CSeq: 1 INVITE
    Contact: <sip:user@[lip]:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 781
    v=0
    o=James 0 0 IN IP6 lip
    s=0
    c=IN IP6 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2800
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2018669853
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:3535381580
    7.061182 @SIP/Transport.c:2353 type=1 (00000000/0)
    [INVITE sip:user@[rip]:16402 SIP/2.0
    Via: SIP/2.0/UDP [lip]:16402;branch=z9hG4bK324adc9245ffbda5
    Max-Forwards: 70
    To: "u0" <sip:user@[rip]:16402>
    From: "0" <sip:user@[lip]:16402>;tag=1028680691
    Call-ID: 1452b6ae-ba2d-11dc-b315-c8edfa8e4012@254-179-33-3
    CSeq: 1 INVITE
    Contact: <sip:user@[lip]:16402>;isfocus
    User-Agent: Viceroy 1.3
    Content-Type: application/sdp
    Content-Length: 781
    v=0
    o=James 0 0 IN IP6 lip
    s=0
    c=IN IP6 lip
    b=AS:2147483647
    t=0 0
    a=hwi:1056:2:2800
    a=iChatEncryption:NO
    a=bandwidthDetection:YES
    m=audio 16402 RTP/AVP 110 121 12 3 0
    a=rtcp:16402
    a=rtpmap:121 speex/16000
    a=rtpmap:122 speex/8000
    a=rtpmap:113 X-AAC_LD/44100
    a=rtpmap:110 X-AAC_LD/22050
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2018669853
    m=video 16402 RTP/AVP 123 126 34
    a=rtcp:16402
    a=rtpmap:123 H264/90000
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16402 VIDEO 16402
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
    a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
    a=rtpID:3535381580
    Video Conference User Report:
    0.000000 @:0 type=5 (00000000/16402)
    [Local SIP port]
    0.000018 @:0 type=5 (00000000/16402)
    [Local SIP port]
    7.754039 @Video Conference/VideoConferenceMultiController.m:1476 type=5 (00000000/0)
    [IP And Port Data With Caller IP And Port Data: Obtained 200 bytes of local IP and port data (5 entries). Remote data was 0 bytes (0 entries).
    Binary Images Description for "iChat":
    0x1000 - 0x230fff com.apple.iChat 4.0 (601) /Applications/iChat.app/Contents/MacOS/iChat
    (plus the rest of the stuff)....... this means very little to me.
    I may have left out some vital information, and if so sorry but just ask and I'll fill it in if it can help solve the problem for us.
    If anyone can help with this matter than many thanks in advance.

    Hi Ralph,
    Thanks for the links. I have had a look at the ADSL Nation web site, and yes I did set my modem up as they state, the DNS server was removed.
    Thinking back to when I had just the modem connected straight to the computer without the Airport (as per you suggestion) and iChat worked including the video, it would make me think that the problem lays with the Airport? But by the sounds of your last post the Airport does not have settings to be able to change DoS or SPI or it does not make any difference anyway/ or it Automatic?? Is that what you mean?
    I have noticed on other posts people talking about having a list of ports open for iChat. As on your web site as well. However I think your web site is looking towards iChat3, I think? I'm think that iChat 4 is different when it comes to port opening??. Is this something I have to set up on the Airport and if so how? The list of ports go something like this, that I've seen.....
    5190, 5220, 5222, 5223, 5298 TCP and 5060, 5190, 5297, 5298, 5353, 5678, 16384-16403 UDP
    I just saw this in a new post.( http://discussions.apple.com/thread.jspa?threadID=1331562&tstart=0 )
    Are they ports on the Airport or iMac? I was thinking that by adding the iChat to the list on the Firewall that all the ports that need to be open would be opened by Leopard? Or do I need to do this manually as well on the Airport? Does Bonjour have anything to do with this? Is that something I need to look into.
    Thanks for the on going help with this one, it seems to be a strange one!

  • Broadband Dropping Out and Connection Speed Decrea...

    Sorry to be a pain but I am back here again.
    Since the last issue with speed, connection drop out and noisey line which required an underground cable to be partly replaced, all has been fantastic and no problem to report. Many thanks to those who were involved in helping with getting that issue resolved.
    About 10 days ago the broadband started to drop out at random times but not too often. The broadband hub light would go out for about 15 seconds before returning. My connection would automatically resume and no great problem. It has since become more of a problem and pain.
    The frequency of drop out increased with a sort of pattern. Last week an example would be drop out at 11:50 am, again at 12:40 and once more at 1:30 pm. Each time the connection returned my computer icon for wifi would be a warning triangle. I clicked on the icon and would get a message 'limited connection'. The only way I could connect again would be to click the icon and select to disconnect and then connect, making sure a 'tick' was in the box for autoconnection. A bit more of a pain than before but usable. It got more of a problem over the next few days.
    The frequency of drop out increased. This became a right pain when trying to purchase things online as I could not be sure in the purchase had been completed or if I tried again would I get two lots? Upon broadband connection returning I would not be able to 'auto connect' but would get the warning triangle of 'limited connection'. I tried the click to disconnect and reconnect but it failed to work. I ended up shutting down the laptop, waiting before powering up. This failed to work as all I would get is the warning triangle and 'limited connection'. The only way I could reconnect was to press the 'restart' button. This worked but it got worse.
    The next day the broadband connection would drop out every couple of hours. It got to the point that even pressing the 'restart' button would not allow me to connect. I tried three times and gave up. I had to resort to pressing the very small 'reset' button on the back. This cured the problem for about 12 hours before the drop outs started again.
    It is now a case of 50/50 if I can connect to the broadband again after a drop out. It is getting quite frustrating. I only used the small 'reset' as a last resort. I have noticed that the speed of the connection has started to drop down also.
    Each time the hub drops broadband and I can auto connect and do not press any hub button, the timer has reset to zero days and zero hours. I know it takes about a week for the connection to settle. I do wonder if these drop outs are messing the connection settings for my line speed? The line used to be rated at 21 Mbps but has decreased to 17 Mbps, my actual connection used to be 19 Mbps but struggles to reach 14 Mbps. It is slowly dropping with each and every drop out.
    I also looked at the event log in the hub. Just before each broadband drop out I see a external connection is made with the initials 'CWMP' followed by 'event code 1 boot' or 'event code 6 connection request' or 'event code 4 value change'. Straight after the broadband connection drops out with out fail.
    All I can seem to find out is that the external connection is either the hub connecting to the server or vice versa? As for the codes? I have no idea at all.
    I only ever resort to pressing 'restart' if I cannot connect to my hub. I have only pressed the 'reset' as a last resort as nothing else worked to allow me to reconnect.
    Can anyone offer any help or best a permanent fix?

    I connected to the test socket and used a wired connection for the speed test and hub stats.
    The hub position and run of cables are the same as when the last engineer advised as the best set up.
    Since my last post I have checked the event log and 'CWMP' has made at least two remote connections but the hub did not drop broadband connection. The broadband has been stable but just slower than usual, as you stated due to the drop outs/disconnections.
    I guess a case of wait and monitor to see if the problem has resolved itself?
    Will the speed automatically return to the usual 18 to 19 Mbps? or will something else have to be done to reset it at the exchange/server?
    Here are the hub stats from this morning.
    Connection Information
    Line state:
    Connectedppp0_0
    Connection time:
    2 days, 00:23:43
    Downstream:
    16.69 Mbps
    Upstream:
    1.024 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.5 dB / 7.1 dB
    Line attenuation (Down/Up):
    10.3 dB / 6.7 dB
    Output power (Down/Up):
    19.8 dBm / 12.4 dBm
    FEC Events (Down/Up):
    4947 / 0
    CRC Events (Down/Up):
    11 / 11
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    377 / 48
    Error Seconds (Local/Remote):
    72 / 21

  • No audio on dvd after burning

    iMac 10.6.1./iDvd 7.1.2. I can see that there are 2 files in my movies folder, 1 for audio and the other for video. The video is there in its folder but there is no audio in the folder, it's empyt. 1 1/2 hours of writing from iMovie to iDvd then another 3 hours writing to a dvd disc to have no audio with the video *****, hellllppp please

    Once you have the project as you want it in iDVD save it as a disk image via the File ➙ Save as Disk Image menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed available to assure the best burn quality.  Always use top quality media:  Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Network coverage drops in and out after upgrading iPhone 4s to ios5.1, Network coverage drops in and out after upgrading iPhone 4s to ios5.1, Network coverage drops in and out after upgrading iPhone 4s to ios5.1

    Can anyone please tell me what I can do to fix the following problem....I updated the software to ios 5.1 two days ago and since then my network coverage drops in and out. Very difficult to make recieve calls with this happening every few seconds and near impossible to use the Internet. I have contacted support but got no support as 90 days had just ended. I have researched this problem all over the Internet and am now aware that I am not the only one with this problem after the upgrade. I have reset many times and read every post and still there are no answers...Can anyone please help? I'm trying to run a business and it's impossible with the phone doing this now.

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • OsX 10.5.4 Drops PC Network connections after several hours

    Recently update G5 to OSX 10.5.4 and find that our connection to the office pc network gets dropped after a few hours. Before it was fine. Not sure if problem is linked to the fact that we need to use the Go 'connect to server' in order to connect to our pc server. Once connected the shared connections on the left pane in finder are operable. I recall this is a reported bug.
    Thanks for any suggestions

    *UPDATE :*
    Since I isolated the issue to just the Mac on the network, i thought it I should test if it affected all macs and OS versions.
    Here are my conclusions:
    Power Mac G5 running 10.5.8 -> Drops Connection after NTP Sync
    Mac Book Pro running 10.6.4 -> Drops Connection after NTP Sync
    Mac Book Pro running 10.6.4 (wireless) -> Drops Connection after NTP Sync
    Any ideas ?
    ~D

  • Problem with dropping audio and disk limit

    Hi,
    I have problem with working of Soundtrack Pro. When i trying to work and show message:
    DISK LIMIT
    Soundtrack Pro is dropping audio because your computer's hard disk can't deliver all the audio in time. Try removing some long files or quitting other applications.
    The problem is that i have 200 GB free space and in one time use only soundtrack for working.
    Please help!!!!

    Thank you fro your answer, but i try to make a short audio 30 sec. spot. The media for this spot is not very big. The transfer of system disk is 50 mb/s do you think if we put another disk will help?

  • No audio in dvd after burning.

    So I've burned hundreds of projects before and have never had this happen. After encoding the video the project goes straight to writing to disc. Skips audio encoding altogether and therefore I have no audio on the disc whatsoever. It's not a menu audio problem or anything, just the actual audio that matches the video.
    If anybody has any suggestions it would be greatly appreciated. I have tried twice for this project same thing happens.

    Hi t
    a. most common origin is - music/audio from iTunes.
    Way around - copy out audio as .aiff to eg. an audio CD. Use this in Your project.
    b. Try to do a DiskImage. Play it with Apple-DVD player. OK ?
    If OK then burn with Apple Disk Util tool or if You got Toast™.
    Yours Bengt W

  • Why Apple Tv 2 drop Home Sharing connection after few minutes?

    I just installed an Apple TV 2. Internet connection applications as Apple Store, Youtbe, etc work very well but it drops Library`s communication just after a few minutes. I`m running files like music that are in the library in a PC with Windows Vista.
    I`ve been reading other discussions and have done every thing that was suggested as:
    - setting Static IP address
    - have set Firewall with the ports are supposed to open
    - have set Port Forwarding on the router (a Linksys WRT54GS)
    - have updated Network Card driver
    - have updated router firmware
    - turned off sleepling mode and screen saver
    - restored Apple TV 2
    - reset router
    - installed last Itunes version
    All that and possibily other things that I do not remember right now but still looseingconnection to the Library after a few minutes. I have realized first time I put a slide show of pictures with music background and the music always stops after the second music. After that you just see the message that you need to turn on the Library related to my Apple ID.
    Today I did a test with a home sharing with another computer I have that runs Windows 7 and guess what: the Home Sharing worked fine!
    So, my conclusion is that there is some flaw on Home Sharing when running Itunes in Windows Vista or specificly with this computer running the Windows Vista.
    I have done a research and have not found anything else. So, could anyone have a hint of what is going on?
    Thanks,
    Ricardo

    Yesterday were released the IOS 5.1 and the Itunes 10.6. I thought that updating the IOS on the Apple TV 2 and the Itunes on PC, my problems would go away. I did that but for my surprise it has NOT.
    Then I had a recall that I have read somewhere a while ago about issues with the AVAST Anti-Virus and Home Sharing, that can generate connectivity issues,
    In one of my first temptatives to resolve this issue I have stopped the AVAST and I still had the problem, so I left this trail of solution. But since nothing was working I decided to uninstall it. I was a little skeptical about it but gave a shoot.
    To my surprise, when I uninstalled it, booted the computer and did the Home Sharing, the problem was FIXED!
    That made total sense because the other computer that runs Windows 7 and I have tested before, worked fine, it runs AVIRA as Anit-Virus software.
    So my conclusion is that, on my case, the AVAST caused the issue and to stop its service was not enough to diagnose the issue. I had to uninstall it, believe or not. And that the issue has nothing to do with Windows Vista OS but with AVAST.
    After that, I uninstall AVIRA as Anti Virus software and, since that, the Library and Home Sharing (24 h ago) is working perfectly and I think that will stay.

  • Only my MBP Drops L2TP VPN Connection after 60 Seconds

    My Old G4 Laptop and my Dual G5 Tower both connect to my office via L2TP VPN without an issue. with the exact same settings exported over to my mac book pro, the connection drops after exactly 60 seconds. I've tried both wireless and wired connections, and in either case, the VPN drops after 60 seconds of connect time.

    I checked with my VPN administrator. He upgraded the XServe to Mac OS 10.4.5, and we tried again, with the same results. He sent me the server log to post:
    2006-03-14 14:39:20 PST Listening for connections...
    2006-03-14 14:43:44 PST terminating on signal 15
    2006-03-14 14:43:44 PST terminating on signal 15
    #End-Date: 2006-03-14 14:43:44 PST
    #End-Date: 2006-03-14 14:43:44 PST
    #Start-Date: 2006-03-14 14:44:55 PST
    #Fields: date time s-comment
    #Start-Date: 2006-03-14 14:44:55 PST
    #Fields: date time s-comment
    2006-03-14 14:44:55 PST Loading plugin /System/Library/Extensions/L2TP.ppp
    2006-03-14 14:44:55 PST Loading plugin /System/Library/Extensions/PPTP.ppp
    2006-03-14 14:44:58 PST Listening for connections...
    2006-03-14 14:44:58 PST Listening for connections...
    2006-03-14 17:06:52 PST Incoming call... Address given to client = 172.16.6.2
    Tue Mar 14 17:06:52 2006 : Directory Services Authentication plugin initialized
    Tue Mar 14 17:06:52 2006 : Directory Services Authorization plugin initialized
    Tue Mar 14 17:06:52 2006 : PPTP incoming call in progress from 'REDACTED'...
    Tue Mar 14 17:06:52 2006 : PPTP connection established.
    Tue Mar 14 17:06:52 2006 : using link 0
    Tue Mar 14 17:06:52 2006 : Using interface ppp0
    Tue Mar 14 17:06:52 2006 : Connect: ppp0 <--> socket[34:17]
    Tue Mar 14 17:06:52 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:52 2006 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x122fcd45> <pcomp> <accomp>]
    Tue Mar 14 17:06:52 2006 : lcp_reqci: returning CONFACK.
    Tue Mar 14 17:06:52 2006 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x122fcd45> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : sent [LCP EchoReq id=0x0 magic=0xe2f50f1d]
    Tue Mar 14 17:06:55 2006 : sent [CHAP Challenge id=0xbf <cc4af73a9d88941b39418f9c31043e6c>, name = "osxvpn.local"]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP EchoReq id=0x0 magic=0x122fcd45]
    Tue Mar 14 17:06:55 2006 : sent [LCP EchoRep id=0x0 magic=0xe2f50f1d]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP EchoRep id=0x0 magic=0x122fcd45]
    Tue Mar 14 17:06:55 2006 : rcvd [CHAP Response id=0xbf <REDACTED>, name = "dpisoni"]
    Tue Mar 14 17:06:55 2006 : sent [CHAP Success id=0xbf "S=REDACTED M=Access granted"]
    Tue Mar 14 17:06:55 2006 : DSAccessControl plugin: User 'dpisoni' authorized for access
    Tue Mar 14 17:06:55 2006 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : MPPE 128-bit stateless compression enabled
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfReq id=0x1 <addr 172.16.100.51>]
    Tue Mar 14 17:06:55 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Mar 14 17:06:55 2006 : ipcp: returning Configure-NAK
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfNak id=0x1 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0216:cbff:fe89:f062>]
    Tue Mar 14 17:06:55 2006 : Unsupported protocol 0x8057 received
    Tue Mar 14 17:06:55 2006 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 16 cb ff fe 89 f0 62]
    Tue Mar 14 17:06:55 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:06:55 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfAck id=0x1 <addr 172.16.100.51>]
    Tue Mar 14 17:06:55 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfReq id=0x2 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : ipcp: returning Configure-ACK
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfAck id=0x2 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : ipcp: up
    Tue Mar 14 17:06:55 2006 : found interface en0 for proxy arp
    Tue Mar 14 17:06:55 2006 : local IP address 172.16.100.51
    Tue Mar 14 17:06:55 2006 : remote IP address 172.16.6.2
    Tue Mar 14 17:06:58 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:06:58 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:06:58 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:06:58 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:01 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:01 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:01 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:01 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:04 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:04 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:04 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:04 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:07 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:07 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:07 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:07 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:10 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:10 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:10 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:10 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:13 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:13 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:13 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:13 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:16 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:16 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:16 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:16 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:19 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:19 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:19 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:19 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:22 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:22 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:22 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:22 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:25 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:25 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:25 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:25 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:28 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:28 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:31 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:31 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:31 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:31 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:34 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:34 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:34 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:34 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:37 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:40 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:40 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:40 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:40 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:43 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:43 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:43 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:43 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:46 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:46 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:46 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:46 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:49 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:49 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:49 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:49 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:52 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:55 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:55 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:55 2006 : rcvd [LCP TermReq id=0x2 "MPPE disabled"]
    Tue Mar 14 17:07:55 2006 : LCP terminated by peer (MPPE disabled)
    Tue Mar 14 17:07:55 2006 : ipcp: down
    Tue Mar 14 17:07:55 2006 : sent [LCP TermAck id=0x2]
    Tue Mar 14 17:07:55 2006 : rcvd [LCP TermReq id=0x3 "MPPE disabled"]
    Tue Mar 14 17:07:55 2006 : sent [LCP TermAck id=0x3]
    Tue Mar 14 17:07:55 2006 : Connection terminated.
    Tue Mar 14 17:07:55 2006 : Connect time 1.1 minutes.
    Tue Mar 14 17:07:55 2006 : Sent 0 bytes, received 8176 bytes.
    Tue Mar 14 17:07:55 2006 : PPTP disconnecting...
    Tue Mar 14 17:07:55 2006 : PPTP disconnected
    2006-03-14 17:07:55 PST --> Client with address = 172.16.6.2 has hungup

  • Losing audio from dv after burn

    created project in imovie 4.0.1 and shared to idvd 4.0.1. Previewed in idvd and audio is fine, burned a dvd and the audio from the dv camcorder is lost. Not all of the dv camcorder audio is lost but probably 75% of it. Any ideas on how to solve this problem. All voiceovers and music that was added came through fine.

    I would like to piggy-back off of kwinst's problem and request additional info from Shippey:
    I, too, just created an iMovie (probably my 20th) in 4.0.2. It consists of 5 minutes of video taped footage, a few titles, and two songs from iTunes. It plays beautifully in iMovie. Everything's intact. Furthermore, when I slip the burned dvds of it into other Mac drives, the movie plays in the viewer just fine...
    The problem is that the burned dvds (burned using iDVD) lose the audio that is part of the video footage when played on an actual DVD player. The iTunes songs play fine. It's just the audio embedded withing the video that is nonexistent on the DVD when it's played on a DVD player (such as one that is hooked up to a t.v.).
    Aside from needing to know why this is happening, I'm wondering if THIS has anything to do with the problem: the original video footage came from a Sony camera that I do not believe is digital. It was on a larger cassette, possibly a super 8? I hooked that camera up to my Sony digital camera (which I have used numerous times for iMovies), and copied the footage onto the digital camera. That little tape played back fine, plus all audio was intact in the iMovie, so I'm guessing the dubbed footage imported into iMovie is just fine, too.
    So why is it that when I burn a dvd of the iMovie, the songs play well but the audio embedded within the video is nonexistent/just BARELY audible when the t.v?
    is turned up to the hightest setting. When I dubbed the super 8 footage into my digital camera was I supposed to select a 16 or 32-bit option? Where do I find such a setting on a camera?
    Please help me. I am at the end of my rope!

Maybe you are looking for