Project Link Question

If I have copies of an iMovie project on more than one disk drive, each with the same name, is there a simple way to know to which the iDVD project folder (usually on still another drive) of the same name points for its source? There are some files I no longer remember which is primary, and which is backup.
Ernie

Answering my own question: found out by experimenting.
The NSColor class reference tells you that the NSColor object is found in the /System/Library/Frameworks/AppKit.framework. 
Go to the project navigator, right click on "frameworks", choose "add files". Navigate to /System/Library/Frameworks/AppKit and select it. You'll find it added to the frameworks in the project. It will now build and run.

Similar Messages

  • Project Billing Question

    Hi All,
    I have couple of Project billing questions. Hope you can help
    1)A wrong customer was attached to project billing agreement, funding and base line also completed for the customer.
    Now we realized that its wrong customer and want to change it to correct customer.
    What are the options we have here?
    Can we delete or end date the billing agreement?
    will the funding be release from the wrong customner after deleting or end dating the billing agreement?
    2) Wrong customer attached to a project..agreements,funding,baselining are NOT done.
    How can we delete this customer and add the correct customer?
    The option to change the customer is grayed out.
    Appreciate if you can help.
    Thanks

    Hi
    On your first question you said the agreement was created for wrong customer. Since you already baselined the funding, I assume you have that customer linked to the project.
    You can go the Agreement form and  enter a negative funding line allocated to the same project. The total allocated amount will be zero. The agreement is now not allocated and free to be allocated to another project. If it is a wrong agreement you may update the agreement amount to zero.  Now create a new agreement for the right customer.
    The open issue is with the project. You have a wrong customer associated with that project. However, system will not allow you to remove the customer - project record.  Solution depends on the way the project was setup. Did you enable customer at top task? if so, end date the top task and create an alternative top task with the right customer.
    If the project has been set with a single customer you better close the project and start a new one.
    However, if you need an alternative solution, I can suggest a custom method. Go to Help > ..> Examine and change the existing customer of the project to zero contribution.
    Now you will be able to add the right customer to the project and have 100% contribution on it.
    Dina

  • Dynamic web project link absent in Eclipse Junos

    I cant see the option of Dynamic web project link in Eclipse Junos.
    From where i can download the plugin for the same.

    Hi,
    while your question is not necessarily a Java related question, if you downloaded the Eclipse Juno J2EE you should have the option in File->New->DynamicWebProject.
    All the best !

  • Sub conttacting purchase order with Project link

    dear all,
    i have a confusion.
    when we create normal sub con PO, it works fine. but when i create  it w r t project link (account assignment Q & item catagory L)
    at the time of goods issue against purchase order it show error :
    no materials available for this PO.
    why system behave like that ?
    how to resolve this problem ?

    Hi
    Normal subcontract the consumption of components happenes by 543-o movement type. When you give account assignment Q in PO the consumption happenes via 543 Q. Which is not a vendor stock, it is a project stock. So system will not allow you to send components to vendor via 541. This is normall scenario in Make to order scenario.
    What you need to do is, Go to material masters of compnenets and MRP-4 view give "individual.coll" field as 2 that is collective requirement only. Then system will consume stock from 543-o. So it will allow to issue material using 541 for subcontracting PO.
    Regards
    Antony

  • Project Management Question - timelines for Production system deployment

    Hi
    I need an expert advice on setting up timelines for establishing an Oracle Apps Production environment. We are implementing Oracle HR & Payroll at an organization.
    Our system architecture is a 2-node application tier and 2-node DB tier (RAC). RAC is configured by another party and we only have to prepare the application tier (2 nodes)
    We would be installing Oracle Apps R11i (11.5.10) with jserv load balancing on the 2-nodes
    Can anyone suggest how much time this should take to install/configure & patching of the application tier (on 2 nodes)?
    Regards
    Saira

    Duplicate post (check your other thread):
    Project Management Question - timelines for Production system deployment
    Re: Project Management Question - timelines for Production system deployment

  • Alternatives to Cross Project Links

    Hi,
    Cross Project Links (External Tasks) is an out-of-the-box feature that allows to create dependencies between workplans.
    The basic functionality has not changed from Project Server 2003 (or ever in earlier versions) to Project Server 2013, including Project Online.
    Unfortunately it would be an understatement to say that it is not the ideal tool for creating dependencies of this sort.  For example, There is no mechanism to preview and approve schedule changes (except the notorious "Links Between Project"
    form), creating a dependency requires opening the all related workplans, there are many bugs associate to that, and this list goes on.
    I'm looking for a 3rd party add-on that provides an alternative to Cross Project Links. What other tools would you recommend?
    p.s. I've heard of 'TPG ProjectLink'. Had anyone tried it?

    Dominic,
    I have to be honest
    that I'm familiar only with the deliverables feature on Project Server 2007, and not with any updates on 2010 and 2013 versions.
    I have invested many
    hours in investigation of this tool and read documentation by Microsoft and bloggers, and reach the conclusion that this is not the right tool for me.
    As far as I know,
    the deliverables feature has not been changed dramatically in the 2013 version, therefore I'm looking the alternatives.

  • Project Lite users cannot see Project link on Office365 toolbar

    Our Project Lite users do not see the PROJECT link in the Office365 toolbar.
    All other roles can see the link - these have either Project Online subscription or Project Pro for Project Online subscription.
    I have verified the following:
    These users have Project Lite and SharePoint online licenses assigned in the Office365 portal - user license area
    We are using Project Server permissions mode - with a custom Team Members group - that maps to the OOB Team Members group and My Task category permissions.   There are no custom category permissions set on the Resource- only custom Team group
    membership
    We even shared the PWA site with the members (Team Members for Project Web App)
    We are using ADSynch to synch users to the custom Team Members group via an O365 group.
    We are using the default \PWA - it is the only instance of PWA in the Office365 environment (E3 subscription
    These users can access the PWA by entering the URL in their browser - they just cannot see the Project link on the 0365 menu bar.
    Note:  The Office365 SharePoint online administrators have created a custom master page - but the PROJECT menu item is rendering for non-Project Lite licensees.
    Any ideas on the cause or how to get Project Lite users to see the PROJECT link on the O365 toolbar?
    LB

    Hello,
    Please can you confirm they are using the correct URL?
    It should be along the lines of https://<Company_Name>.sharepoint.com/sites/pwa/
    I ask you to check this as I have seen previously users not seeing the Project link when using a different URL.

  • Excelrepor​tdemo project link error with CVI2010 on windows 7, 64-bit operating system

    I am trying to run the excelreportdemo project in CVI2010 on windows 7, 64-bit operating system. I have the Excel2013 installed as well. I have chosen the build configuration as release or debug for 32 bit system so to be compatible for the test platform for production.
    However, I get 12 Project link errors as following:
    Undefined symbol '_ExcelRpt_RangeBorder@24' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WriteDataFromTableControl@16' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_SetCellValue' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_SetCellRangeAttribute' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ChartAddtoWorksheet@40' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ChartWizard@52' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_SetChartAttribute' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WorkbookNew@8' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ApplicationNew@8' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ApplicationQuit@4' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WorkbookClose@8' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WorksheetNew@12' referenced in "excelreportdemo.c".
    I have found a previous dicussion back in 2007. Unfortunately it did not help for the same problem on my new machine and CVI2010. Could anyone give me help on this/
    Thanks!
    Yuwei
    Solved!
    Go to Solution.

    The previous discussion link is pasted below:
    http://forums.ni.com/t5/LabWindows-CVI/Problems-adding-the-activex-instrument-e​xperiencing-undefined/m-p/580608/highlight/true#M3​1390
    It did not solve my problem, but may spark your idea of helping me.
    Thanks a lot!
    Yuwei

  • Cross Project Linking

    I am familiar with creating a Master Plan and linking milestones between sub projects and the master plan but can a single Project Manager create a link to another project plan without creating a master plan shell to facilitate the actions required? 
    Is the only way to do this is to add the filepath of the other project (if known) into the predecessors or successorrs column or is there a smarter way?
    Thanks
    Steve

    Hi Steve,
    As soon as the project manager can open (in edit mode) the 2 projects, he just has to open a temporary empty project, insert the 2 projects, link the milestones, close the temporary master project without saving it but saving the 2 projects. A more tedious
    way as you said is to type directly the file path if known.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • How many cross-project links are too many for dynamic Master-Subproject plan?

    Hello
    We currently have a dynamic master-subproject plan and resource pool, with 8 workstream plans and approximately 150 program milestones in the master.  We are considering creating cross-project links to the 150 program milestones - from the master
    into the sub-projects.  I have read that it is best practice to keep cross-project links to a minimum.  Is what we are considering too much?  Will 150 links from master to sub-projects risk a corrupted plan?
    Thanks in advance...
    Art

    Yes the cross-project links also use old DDE technology which is where the file corruption risk is. Move, rename, overwrite or store on a WAN and the file corruption dice roll. Its when not if, but you can be lucky and survive many months.
    What do I do? If Project Online/Server and its deliverables feature is not available then being a bit of a VBA whiz:
    I copy all milestones weekly to SQL Server using a VBA macro.
    In other projects I have a macro to select one of those milestones and record teh project number, title and task unique id into a text field.
    I then have a macro that finds all tasks with data from step 2 and reads the latest date from SQL Server and updates the task start date.
    This works perfectly and has zero corruption risk as the only thing I store is text data in a custom field. I've supported some large SAP programmes with 10 files and many thousands of tasks using this technique. Oh, yet another macro creates static (so
    no links) masters each week for reporting purposes from all sub-projects.
    Art, with the number of files and links it might be time to experiment with Project Online.
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Metadata and the After Effects Project Link

    Here's one that could be very useful - when I render, I always leave the Project Link choice turned on. That way, if I lose track of the project I created the output from, I can always open the clip from within AE, choosing Project, and it finds the project based upon the embedded link. Great so far...
    What I want to be able to do is view the Metadata on the Project Link within Bridge, or in something else which will view Metadata, so that I don't have to open the clip in AE as a Project, then shut it down and open the project in the regular way, since opening as a project collapses the whole project into a folder, which I find inconvenient. Does any of this make sense? The Project Link has to live somewhere in the Metadata, but poring over it in Bridge, I have yet to find the project name anywhere in the "usual" Metadata. I assume the Project Link must be embedded, since there are no sidecars in my AE folders. Thanks...
    Joe Bourke
    Owner/Creative Director
    Bourke Media
    [link removed]

    Mylenium -
      I found the information I needed - this is a huge one for me, since I organize all of my projects using Bridge - I just discovered that in Bridge, if you go into the XMP Metadata by right-clicking the .mov file, the window which opens has a Tab view - the second from the end is Advanced. If you then roll open the Schema entry, under creatorAtom:aeProjectLink (struct), lo and behold, there sits the project name with the full path!
    This is huge, in terms of being able to pinpoint the project which created the final output on my system.
         Joe Bourke
         Bourke Media

  • C- project certification question and material

    Hi Gurus,
    I want to know is there any cretification for  SAP C- Projects  could you please let me if any one has SAP done c-project certification questions, or any relevant sites wherein I can get the same.
    Thanks in advance for your help,
    Thanks
    Ashish

    Hi Ashish,
    cProjects being a part of the PLM package, you would need to undergo SAP PLM certification. As per my knowledge, there is no separate cProjects suite certification available.
    However, there are training programs conducted by SAP for cProjects and xRPM. You may get the details regarding these from the marketplace. Please refer https://websmp101.sap-ag.de/partnerportal/apj/home
    Let me know if this helps.
    Regards,
    Vivek Pandey

  • Project link when using AME to render AE comp?

    Adobe has suggested that we NOT use AE render queue to output file to MXF OP1a AVC-100 due to a bug in the format size . I rely on using the Project Link function when I did use the AE render queue. How do I get that function when using AME to export?

    That's not something that you can do with AME currently.
    If you rendered a master file from After Effects and then transcoded it in AME, you should be able to preserve the metadata from the master in the transcoded file output from AME.  Let me check to see if that works...

  • Project load question

    I'm interested to know what Encore is processing during project load.
    I thought it might be checking links to Premiere Pro, or checking transcode files.
    The Pr project linked to loads pretty quickly on my machine.
    Any info welcome.  Thanks.

    What do you see on the screen? Loading transcode presets can take some time.
    It may be checking links, but more likely generating cached files. That should only happen once as long as you aren't having permissions problems.
    You can try the "Run As Administrator" that improves some problems.

  • Safari broken image link question mark in a blue box icon

    The url I get the safari broken image link question mark in a blue box icon most often is "apple.com/startpage/". There may be 10 or 12 of them. However, most apple.com pages have at least 1. In fact I am looking at 1 right now. I have emptied the cache. I do not wish to reset Safari because I do not want to reenter all of the passwords to various sites. Is there a simple answer?
    1.8 Ghz Power PC G5   Mac OS X (10.4.3)   Safari 2.0.2

    Hi Rex,
    Who is your ISP and what addresses do you have set in the DNS section of your System Preferences -> Network preferences?
    Have you tried logging into a different user account on your machine to see if that has the same problem? This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> [+] to create a test one (and [-] to remove it if needed)
    Also, do you use any third party internet software (Norton, Intego, etc.)?

Maybe you are looking for