Project management module not starting

Hi
I am facing problem in running
primavera project management module.
I had lock
my system and then upon opning my login i faced an error
which are shown below.
Error:
"The file C:program files\primavera\project
management\PM.ini can not be set to read write
status"
After clik on OK. Following error comes:
"An application
event has been intercepted.Please note the event code for
the reference. Event code: AVAA0-3953-8" 
Kindly help me out in
resolving this situation earliest.
 
Regards,
Jyotir

Thanks for your reply
I resolved that
issue.
Your point of view is right,it's
admin rights issue.
I lost permission for
read/write for controlling application in .ini file of
project management.
Once again thanks for
your cooperation and advice.
 Regards,
Jyotir

Similar Messages

Oracle application server 10g enterprise manager is not starting

Hi all,
Pls. help me, our OAS 10g's enterprise manager is not starting whereas AS is up & opmn is also running.
Can anybody has idea?.Thanks in advance.

hi Kamran,
Please remember to always give some details about what product/ type/ version/ platform are you working with. this does not leave others to wait for divine revelation or mortal guessing;
also on reporting errors, please provide exact error(s) with error codes as you see and not the error described in your words. that helps clearly understand the problem.
about current problem, please tell us what did you expect to see and what did you exactly get.
and Roberto is right, check the version in %ORACLE_HOME%\config\ias.properties.
regards,
AMN

Oracle APP'S Installations Context Value Management Could not started

oracle APP'S Installations Context Value Management Could not started
how it is started

Fadi, Context Value Management runs during Rapid Install or AutoConfig to make sure the context file is in good order. If it fails at the time of the installation, then most probably you have missing components at the OS level.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

Xfce4-power-manager does not start, but after relogin - works

Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.

Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32)

Premiere Pro Project Manager does NOT include After Effects files.

Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

Here's the best way: Personal Responsibility.
Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

Solutions Manager 700--Not Starting up -Urgent

Hi,
My solutions manager is not starting up.
The message I get is the following;
When restrart the system I get the
1.message " Process disp+Work is starteed but not connected.
2. Later I get the message I get is " disp+work is stopped"
How do I get around it !!
urgent please

Nice to see your response Here is the trace file info :
[Thr 4584] Thu May 24 11:53:31 2007
[Thr 4584] JLaunchRequestFunc: receive command:17, argument:0 from pid:3048
[Thr 4584] JLaunchIShutdownInvoke: set shutdown interval (stop:1180032811/end:1180032931/TO:120)
[Thr 4584] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 4584] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 276] JLaunchISetP4Port: set p4 port 50104
[Thr 276] JLaunchISetHttpPort: set http port 50100
[Thr 3820] JLaunchISetP4Port: set p4 port 50104
[Thr 276] JLaunchISetHttpsPort: set https port 50101
[Thr 2184] JLaunchISetState: change state from [Running (3)] to [Waiting for stop (4)]
[Thr 2184] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
[Thr 5440] Thu May 24 11:53:37 2007
[Thr 5440] JLaunchISetP4Port: set p4 port 50104
[Thr 5172] Thu May 24 11:53:39 2007
[Thr 5172] JLaunchISetHttpsPort: set https port 50101
[Thr 5172] JLaunchISetHttpPort: set http port 50100
[Thr 4620] Thu May 24 11:53:41 2007
[Thr 4620] JLaunchISetHttpPort: set http port 50100
[Thr 3404] JLaunchISetHttpPort: set http port 50100
[Thr 3036] Thu May 24 11:53:53 2007
[Thr 3036] JLaunchISetTelnetPort: set telnet port 50108
[Thr 4304] Thu May 24 11:53:54 2007
[Thr 4304] JLaunchISetHttpPort: set http port 50100
[Thr 2184] Thu May 24 11:53:59 2007
[Thr 2184] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
[Thr 4492] Thu May 24 11:54:02 2007
[Thr 4492] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 4492] JLaunchCloseProgram: good bye (exitcode = 0)

Project Manager will not collect all files and Start a Complete New Project

As editor of several projects consisting of multiple terrabytes of footage, it's very important to me to be able to use the project manager to collect all files and start a new project. However, this is not happening!! After I've completely finished a project I should be able to save a new "trimmed" project in the desired location of choice. When I use this feature with PrPro CS 4.2.1 - I only get a partial trimmed project that when opened asks where are the missing files. I've also tried using the project manager to collect all files and move to a new location. Again, only a part of my project is being moved!!!! Earlier versions of the PpPro had no problems with this function. I've got two systems and both of them are identical in actions. Any help would be greatly appreciated!!!
BBTv

How can one do that if each project has thousands of pieces of video, text templates, music scores, photoshop documents, after effect files and so on? The number of different folders per project is almost mind boggling. Any help at all in a quick fix or update or anything would be greatly appreciated. I don't have any problem with my other editing programs and have run earlier versions of PrPro that had no problems with collecting all the files within a project and exporting them to a new location throught project manager either in trimmed or full projects. I really hate to have to start using Final Cut again because of such an easy issue. I know I'm overlooking something and any help would be greatly appreciated.

Firefox will not start and profile manager will not start

This has happened on two accounts on my laptop. I am running windows 7, 64 bit and firefox 18.0. Firefox had been running on this machine for several years without incident, but suddenly when I try to start firefox, it will not start. The little wait icon spins for about a second then disappears without starting firefox. Other browser will start and run. I reboot and when I click on the icon to start firefox nothing happens. I tried to start the profile manager as seen in the knowledge base, but nothing starts either. I switched to another account on this computer and firefox started and ran for about a week, until today where it just stopped working. I have not tried to reinstall firefox as the message boards say this will not help. Any ideas?

Thanks for your help. I had tried starting Firefox in safe-mode before I posted this request, but it did not work. I tried to restore the system to an earlier version, but that made everything worse. Two accounts were unusable and one sort of worked, so I reloaded the operating system and now firefox works, for how long, I don't know. But thanks again for your suggestion.

The order of topics in the Project Manager is not reflected when creating a PDF for review.

Can't seem to find an answer to this in the forums...
Using RH10.
In the Project Manager pod is a default 'Project Files' folder.
Within that I have a 'Topics' folder in which my topic files reside.
Under the View menu, I have selected 'By Topic Title'. I understand that this displays the topics by their title as opposed to their file name. I understand that this is a display toggle only, and has no relation to the order of the topics - the alternative toggle is 'By File Name'.
Notice in the image below, my topics are displayed by topic title, but aren't in alphabetical order. ...yet.
There's a button at the top of this window for changing the sort order to 'Sort by Name', which has the result below.
Ok, so now the topics are displayed by topic title, and in alphabetical order.
Question 1: If that button toggles the view to display topics in 'alphabetical order', what on earth is the other order called? It's certainly not in order of file name, as I've checked a bunch of the topic filenames, and can't see any pattern/order to the this structure.
Question 2: When I go to create a PDF for review (via Review > Create PDF for Review), the window that appears displays all the topics available to me to select for review. However, they're displayed in this other 'odd' sort order instead of 'alphabetical' order. The Help menu says that this window reflects the order of topics as it finds them in the Project Manager. However, what seems to be actually happening is it's displaying the topics based on the view you have selected under the View menu (i.e. either 'View by Topic Title' or 'View by File Name'), and regardless of which view toggle you have selected, the order of the topics is only ever this 'odd' sort order. In other words, in the 'Create PDF for Review' window, it appears I can never see the topic list in alphabetical order. Furthermore, it appears that the only way I can resolve this is to go back into the Project Manager, switch to 'odd' sort order, and manually drag all the topics into alphabetical order. ...I have hundreds of topics.
Is there some way I can quickly change this 'odd' sort order to 'alphabetical'? There must be some underlying file with this order of topics in it (hopefully).

Hi there
I don't have an immediate answer for Question 2, but for Question 1, the topic order is "User Defined" as you are able to click and drag topics to create any arrangement that suits you. This was something added as a result of user feedback. Enough users asked Adobe to allow them to arrange topics this way that they made it a reality. The logic escapes me as I'm a user that normally expects software to list things in either ascending or descending alphabetical order.
Perhaps Peter will pop in with a nice explanation of the PDF for Review sorting and Adobe's logic behind it.
Cheers... Rick

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name: System
Source: Service Control Manager
Date: 21/01/2015 4:50:32 PM
Event ID: 7024
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
 <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
 <EventID Qualifiers="49152">7024</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8080000000000000</Keywords>
 <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
 <EventRecordID>53721</EventRecordID>
 <Correlation />
 <Execution ProcessID="568" ThreadID="12436" />
 <Channel>System</Channel>
 <Computer> intentionally removed.local</Computer>
 <Security />
</System>
<EventData>
 <Data Name="param1">Remote Desktop Management</Data>
 <Data Name="param2">%%2284126209</Data>
 <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name: Application
Source: MSSQL$MICROSOFT##WID
Date: 21/01/2015 5:24:47 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: NETWORK SERVICE
Computer: intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
 <Provider Name="MSSQL$MICROSOFT##WID" />
 <EventID Qualifiers="49152">18456</EventID>
 <Level>0</Level>
 <Task>4</Task>
 <Keywords>0x90000000000000</Keywords>
 <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
 <EventRecordID>4228336</EventRecordID>
 <Channel>Application</Channel>
 <Computer>intentionally removed.local</Computer>
 <Security UserID="S-1-5-20" />
</System>
<EventData>
 <Data>NT AUTHORITY\NETWORK SERVICE</Data>
 <Data> Reason: Could not find a login matching the name provided.</Data>
 <Data> [CLIENT: <named pipe>]</Data>
 <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Wily Enterprise Manager Service not Started in Windows 2008 Server

Hi All,
Our Solution Manager is in EHP1 SP21 and OS-Windows 2008 Server.
We installed Wily Enterprise Manager 8.0. and found 1 non-fatal error in the installation log. The service is not starting.
However it works fine for Windows 2003 Server.
Can anyone encountered with the same kind of problem?
This is the latest log file information:
Summary
Installation: Successfulwith errors.
387 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Action Notes:
Execute ANT Script:       Script:
                          Status: ERROR
                          Additional Notes: ERROR - E:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:425: Timeout: killed the sub-process
Thank you in advance.
Regards
Sanjai

Note 1273028 - Introscope 8 Release Notes resoved this issue.
Known problems in all Releases 8.x
2. Windows Server 2008 is not yet officially supported by CA Wily for the Enterprise Manager. If you want to install the Enterprise Manager anyway, set the "Windows 2003 compatibility mode" for the installer before launching it. To activate this mode, right click on the installer.exe file in the Windows Explorer, select tab "Compatibility", activate the check box for compatibility mode and select Windows 2003. If you do not set this, the installer will consider your OS as Unix and install shell scripts (no suffix) instead of batch files (.bat) and leave out some files for Windows Service registration.
If the windows service still fails to start please check if files ServiceWrapper.jar and ServiceWrapper.dll are present in folder lib. If not download them from attachment of this note.
The service should start although giving an error message regarding the ServiceWrapper.dll. You can ignore this error.

Oracle Management Server not starting up. says node manager is down!!!

Hi ALL,
We are trying to startup (OMS) Oracle Management Server but it's not starting up. it tries to connect to the node manager and says failed to connect to Node Manager as the node manager is not running.
OPMN also not running.
I have attached a snapshot so you can see.
PLEASE HELP
hi Again, below are the error reports
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at omkn-ms01.int.unisa.ac.za:7403.
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.socketConnect(Native Method)
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.Socket.connect(Socket.java:529)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:228)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Attempt to connect to nm failed. Trying to start it...
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>status of node manager:
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Not connected to Node Manager
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
2014-01-30 18:56:52,363 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:172)
regards,
Ambrose.

I assumethe node manager is not running on Exadata though you have posted in the Exadata forum !
how are you starting it. Are you using the gcstartup script within init.d ?
Thanks

Does anyone know a simple project management transaction (not PS)

Hi,
I'm working on SAP R/3 4.6C.
I'm an apprentice (French student-employe), and my boss ask me to deploy a system with he can follow the developpements advance.
The idea is :
The developpers fill daily the time past on a program witch is attach at a project (in Man/Day). then we'll be able to know how many days are consumed on a project.
I want found a simple standard transaction, because I've found the Project System, but it's not simple to deploye and use.
If I dont found, I will develop this, but it's not the goal.
Thanks!

nicholas,
Am not sure there is somethign of what you are asking for... since this would involve Project Management activities such as :
1. Creating an activity
2. Assigning people to the same
3. Assigning time for the same
4. tracking the same through timesheets
I would still suggest that you go with PS since the logic is already built in. But then if it is going to be much simpler that PS , you could go for something custom but would have to do a lot of interfacing with CATS etc...
Arun

Weblogic managed service not starting up after Windows restart

Hi All
I have an issue with start up of Managed instances configured as windows service. When we reboot the machine the services which are configured to be automatically start are not starting up. When I manually start them they would just run fine. I have no clue why this is happening. We have our applications running on Weblogic Server 8.1 SP6
I already tried the following method stated in this URL http://www.javagalaxy.com/forum/viewtopic.php?f=8&t=188? and had no luck with the service start up.
Can someone please guide me through what I can do to fix this issue.
Thanks in advance for help.
Edited by: user4970372 on May 7, 2010 7:28 AM

I did enable the log and see the same error
<May 19, 2010 1:07:00 PM CDT> <Critical> <WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
 at com.rsa.jsafe.JA_PKCS5Padding.a([BIILjava.lang.Object;)I(Unknown Source)
 at com.rsa.jsafe.JG_BlockCipher.decryptFinal([BI)I(Unknown Source)
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:67)
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
 at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
 at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
 at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
 at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
 at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
 at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
 at weblogic.Server.main(Server.java:32)
--------------- nested within: ------------------
weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:77)
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
 at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
 at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
 at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
 at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
 at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
 at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
 at weblogic.Server.main(Server.java:32)
>
<May 19, 2010 1:07:00 PM CDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]>
The WebLogic Server did not start up properly.
com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
 at com.rsa.jsafe.JA_PKCS5Padding.a([BIILjava.lang.Object;)I(Unknown Source)
 at com.rsa.jsafe.JG_BlockCipher.decryptFinal([BI)I(Unknown Source)
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:67)
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
 at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
 at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
 at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
 at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
 at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
 at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
 at weblogic.Server.main(Server.java:32)
--------------- nested within: ------------------
weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:77)
 at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
 at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
 at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
 at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
 at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
 at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
 at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
 at weblogic.Server.main(Server.java:32)
Reason: weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
***************************************************************************

Project management module not starting

Similar Messages

Maybe you are looking for