Project Manager plugin missing error message

When opening documents InDesign CS 3 (5.0.3), I get an error message advising that the document uses the Project Manager plugin, which is "missing." These documents were created in a previous version of InDesign (probably CS1).
Upon saving changes, I get this error message and am required to overwrite the existing document every time.
Some of the images in the document may have been created by a previous user in a CAD program, which is what this plugin seems to relate to (from what I can discern from the limited info I've found online).
All images, however, appear to be either TIF, EPS or AI. There are no DWG images that I can see, though some of the EPS images may have been exported from CAD.
I've been unable to find the Project Manager plugin online. Does anyone know where I can find it -- or, if not, how I can disable the use of the plugin in these InDesign documents (and/or images placed therein)?
I'm running Mac OSX 10.5.4 on a new iMac.
Thanks!
Jim

Open the file in CS3 and then export it back out as INX. Open the INX
file to continue working.
Bob

Similar Messages

Adobe Application Manager install gives error message

I tried to install Application Manager and an error message came up telling me that it was a counterfiet. Not a genuine Adobe product. I've downloaded 3 programs before with no problems. Has something changed that I missed. Any help would be appreciated.
Carlton

The steps outlined at this link will resolve the issue http://helpx.adobe.com/creative-suite/kb/genuine-verification-failure.html

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

"NTLDR is missing" error message when trying to boot R&R Recovery from USB HDD? !

Does anyone know what/why I am getting a "NTLDR is missing" error message when trying to boot from USB HDD? I copied my backup to a USB HDD and made it bootable via R&R but I am still getting this error. Help!
I have a T61 if that helps any.
Brad
Brad R
T61 4GB RAM Intel T8300

the master boot record (MBR) needs to be repaired for that to work.
what OS are you using?
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

"project file missing" error message

I've got 2-3 hours worth of footage from a vacation i took and it would be a real pain to to reimport and re-edit everything.. so i really hope you can help me.
whenever i try to open the movie file, iMovie gives me an error message saying "a project file is missing" "The file "_" couldn't be opened and is being skipped. Click "Ignore All" to skip any remaining missing file messages."
Then it gives me two options - Ignore All and Ok.
the weird thing is it doesnt specify a file. it just calls the file "_"
i've got some music files in it i may have moved around, but besides the fact the movie is on an external hard drive, i cant think of any other reason it would do that.
please help!

As Jeez33 suggested, the file name iMovie is asking about can't be relied on. Something has caused iMovie to either store the name incorrectly in the project file or retrieve the name incorrectly from the project file. The file it's asking about probably doesn't exist and probably never did. The usual cause for this problem is the wrong disk format for the project's disk. (Not the main disk.) So it's garbage in, garbage out.
Another possible cause is that either the project disk or the Mac's own main disk is too full. That can cause disk errors. I mention that because both your disks are quite small. As iMovie works with large video files, a tremendous amount of disk space may be required. So make sure you have plenty. 10 GB free.
You also might try looking inside the Media folder of the project to see what you can see. To look inside the project package, Control-click on the project icon and choose "Show Package Contents" from the popUp menu. Then look inside the Media folder. That will tell you what files are there. Look for any unusual characters in the file names, especially "/", which can confuse iMovie.
It's possible too that the project file has been damaged. The project file is loose inside the package. Its name is "Your Project Name.iMovieProj". When you double-click on the project icon, that's the file that opens.
There's a second project file named "Your Project Name.~iMovieProj". (Note the tilde.) That's a kind of project backup, the PREVIOUSLY-saved version of your project. Try double-clicking on that. If it opens the project successfully, quit iMovie, remove the tilde from the name, and let it be your project file. When you next save, iMovie will create a new tilde file.
Your Mac's hard disk or the external disk may also need some disk repair. Use Disk Utility to verify and repair the external drive. If the drive directory is flawed that can make it impossible for iMovie to read/write to files on the drive, including to its own project file.
Karl

Adobe Premiere Pro CC does not open project - just hangs, no error message

I've just finished editing a project in PP CC, saved it, then tried to reopen it and the program shows a blank page, then hangs. I get no error message.
The project is based off a PP 5.5 timeline. It updates fine (and in fact I can open and convert the original timeline with no problem). However, once I close the new version and try to reopen, this symptom occurs.
I have updated my Creative Cloud software and it shows the Premiere Pro is up to date.
My computer is an ASUS laptop running Windows 8.1 Pro
i5 processor
8GB RAM
NVidea Geforce 610M+2GB graphics card
Need help as I have to have this project output and uploaded by 8am tomorrow.

This is a follow up to my original post and follow up. I've now seen this issue several more times and realize it was not an issue with my USB drive. It is an issue with the Dynamic Linking in Premiere. I consider this a MAJOR BUG, so please note what I've found if you have an issue with archiving or opening projects done with previous versions of PP.
The issue I've found is that Premiere seems to lock up trying to find dead media links. If you've archived a project or moved files from their original position, Premiere CC cannot seem to find them. The result is not a system hang up, but just a blank screen. In some cases, after leaving it for a couple hours it found the media and continued.
I've had a similar issue when trying to link 'dead' media with the actual files. The system goes off into neverland.
The work around I've found is to import the older jobs into a new Premiere CC project. At that point, replace any dead links (do NOT try and find the media as you'll be lost in hangupville) by importing the media again and replacing the clip in the sequence with the new import from the bin. Once all your media is 'live', remove any unused media from the project and confirm there are no 'dead' links (you can look at the media icon and notice a ? if they are not dynamically linked properly). Manually clear any remaining unlinked media. Save the project.
I have started to use Project Manager to archive all Premiere projects when moving them from one server to another.
This is a total pain in the @ss, and nothing I've seen before Creative Cloud. I hope that Adobe gets this resolved or I may consider dropping my subscriptions completely. That is a huge investment, but this type of issue is too much trouble to manage for a small production company.
I welcome any other thoughts, fixes, or comments.

Another Project File is Missing error

To make a long story short... after importing video clips into iMovie and then pulling the .dv files out of the project file and reimporting the files into another movie, now when I try to open the movie, I get the error "A Project File is Missing" and the ignore/ignore all error alerts. When the movie finally opens, the clips are missing, but they are in the trash.
I can pull them out of the trash and work on them, but the edits don't save. If I try to resave the project, then close and re-open it, I still get the errors. I'm using iMovie HD v.5. I am running OS 10.4.9 from an external firewire drive formatted HFS Extended (Journaled). When I start, there's about 57 GB of free space on the drive. After importing the files (one 9.5 and one 8.1 GB in size ), there's 39.9 GB of free space on the drive. There are two files in the Media folder... copies of the original dv files.
What can I do to save the project, so the files are considered part of the project?

Hi Chad - I'm sure you will be helped also by the real experts on this forum, but in the meantime you should be aware that iMovie cannot import MPEG files. You will note that the Error Message is saying there is an unarchiving problem. They must first be converted to DV format. You may need a free app. called StreamClip for this operation:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Hope this helps.

"Actionlist missing" error message when installing latest Adobe Flash

I got the message I need to update it, but after deleting the old version, CANNOT INSTALL the NEW ONE ! HELP?!!!
Error message is "Actionlist missing!" Ideas, anyone? Already deleted the old one per instructions on this site.
Maybe it deleted the actionlist too? NOW What?
Call 956 230-1263...........am wasting too much time here !!!!

What is your operating system?
What is your web browser?
[topic moved to Flash Player forum]

Unable to publish projects with inserted video - error message The Flash video can not be loaded

I've created a project in Captivate 6 with two slides that have inserted videos in them
Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
Below are my settings and the error message
Any suggestions would be greatly appreciated.

Your screenshot indicates you are publishing to a folder on a network drive.
Have you:
Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

Encoding Cmap specified by a font is missing Error Message

Hello all,
I'm afraid I'm having an issue with Adobe Acrobat 9.0 Pro running on Windows XP SP3. I've searched the depths of the internet to find a solution to no avail. Here is hoping this isn't a lost effort to finally get someones support and assistance with the issue.
I work in the IT field and I am seeing an error message on one of our users systems. "The encoding (Cmap) specified by a font is missing." It seems to show up when the user attempta to delete a particular PDF page or replace a certain page. As far as I can understand, this has something to do with the PC itself as I had the user attempt the same process on another PC running Adobe Acrobat 9.0 Pro.
I can't find any solution on the internet, but I did notice that other programs people have used have generated the same error message.
Please help as I am becoming exhausted researching the cause of the error.
Thank you,
TS

HI Josh,
Try starting up in Safe Mode. http://support.apple.com/kb/HT1455
It disables all fonts other than those in /System/Library/Fonts (Mac OS X 10.4 or later) and forces a directory check of the startup volume. Might help...
Carolyn

Application Manager gives "Download Error" message

I'm trying to download Audition from the Creative Cloud Suite, but the Adobe Applications Manager gives a "Download Error" message, offering prompts to retry, quit, or contact customer support. Retry results in the same circular response, Quit obviously quits - but without downloading the desired software, and customer support option eventually leads me here. How do I get the Adobe Applications Manager to work?

this is from sumit singh
Try to delete AAMupdater folder from
~/Library/Application Support/Adobe/ If above doesn't worked then perform below steps
Rename the opm.db file under
~/Library/Application Support/Adobe/OOBE

WD Drive Manager Services component error message MyBook Studio Edition II 2TB on iMac

For five months I have been using a WD MyBook Studio Edition II 2TB in RAID 1 mode on a 27" iMac i7, 2.93 GHz, running Mac OS X 10.6.7, as a Time Machine connected via FW800. Initial installation and operation was all good.
Recently, the blue WD logo disappeared from the menu bar. I reinstalled the WD Drive Manager version 2.25 from the installation disk. The logo reappeared, however when selecting Launch WD RAID Manager from the menu an error message appears:
"The WD Drive Manager Services component could not be found. Make sure the Drive Services component is running first."
I removed the WD Drive Manager with the installation disk and reinstalled and tried again. No good.
Tried again, this time using the USB connection with the same result. No joy.
Tried using the downloadable version (2.25) from the WD website with same results.
Searching Google lead to no hits on anything remotely related for a solution.
So, at this point, I cannot confirm that the drive is actually in RAID 1 mode. It shows up in the Finder as a 1TB drive with 268 GB used.
How can I restore a working version of the WD Drive Manager?
WD Tech Support has escalated the issue to programmer level but without a successful solution. They suggested I post here as well to see if any other Mac users may have had this problem and have found a solution.
Thanks for any assistance or referral.

Unfortunately you probably will not find very many if anyone using WD Drive Manager here, most of us are using a variety of backup strategies that include Time Machine, an on-line backup and a Bootable Clone made with CarbonCloner or SuperDuper.
The no-worry backup plan | Business Center | Working Mac | Macworld
Dennis

Desktop Manager for Mac error message KB19454

Hi All,
I am new to the community and would appreciate any assistance. I have two recent problems for which I am seeking troubleshooting advice. The priority problem is mentioned first below.
I've just encountered this error message, "For help resolving this issue, refer to KB19454 in the BlackBerry Desktop Manager Knowledge Base" when attempting to sync my Curve 8320. I use a Mac, and I haven't run into any difficulties syncing since downloading the newer version of the Desktop Manager for Mac in Dec/Jan. I haven't been able to download the latest update though. I did see an early post by someone with the same difficulty, but I was unclear of the question posed, and thus I am hopeful for potential suggestions for resolution.
The additional problem I've recently experienced is that I can't compose an SMS/MMS message. I can only reply to someone's message. When I try to simply send one, the screen defaults back to the list of messages.
Please Note: I do not have wireless on my phone. I utilize Blackberry Desktop Manager Version 1.0.1
Please also note that I am not able to access electronic messages daily but will attempt to return any responses/inquires as quickly as possible.
Thank you in advance for assistance.
Solved!
Go to Solution.

Hi and Welcome to the Forums!
For your first issue, I cannot tell if you've yet worked through the referenced KB...if not, you can find it here.
For your second issue, I'm unsure...but perhaps this will help:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Image Manager : upload image - error message String index out of range

Hello,
i'm facing an issue with the upload functionality of 'Image Manager'.
When i upload a file, systematicaly an error message pops up :
"error message String index out of range : - XXX"
Where XXX is a value as large as the size of the file.
I have the feeling that the problem may come from the installation of VC.
Did someone encountered this issue ?
Thank you

Hi,
Plz check the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do
Govindu

IDOC_INPUT_ORDER - How manage the custom error message ?

Hello,
on EXIT_SAPLVEDA_002 and EXIT_SAPLVEDA_003 I done some custom check, (I would show some custom message as a result of these check).
My question is: How to show these custom message on the standardc idoc spool (WE02) ??
There's DERRTAB internal table to manage the error, but is not available on there exit ...(EXIT_SAPLVEDA_002 and 3)
Any idea ??
thank you

Hello,
question is if you want to raise an error, which makes sense only if the document is not posted or just an information message.
Please consider that you can put messages into the idoc only connected with a status. If you set status 51 thge Idoc is reprocessible, if you set status 53 it is successfully processed.
In error case you can raise exception USER_ERROR. in exit EXIT_SAPLVEDA_002. Set SY-MSGTY, SY-MSGID, SY-MSGNO, etc before. In exit EXIT_SAPLVEDA_003 you can set changing parameter ok to space. Then SAP will add an error message.
/Michael

Project Manager plugin missing error message

Similar Messages

Maybe you are looking for