Project mat. proc. report with monthly breakup and cumulative for year

Hi All,
can any body suggest a report for  "Project material procurement report  with monthly breakup and cumulative total for a financial year "
Thanks in Advance.
Regards,

Hi Ahmed,
Thank you very much for the response.
I am seeking the std sreport which can give the details for the project material consumption report with monthly breakup with the cumulative month total to year.
ex. jan 10 units , june -10 units , nov 10 units, total (year) =30
regards,

Similar Messages

  • Purchase order report with basic price and Excise duty values

    Hi All,
    Is there any standard report in SAP to get the Purchase order basic price / qty and its Excise duty values ? Since we are including Excise duties for non - codified items (w/o material master and with cost center 'K') Purchase order and the ed values are added to the cost and the requirement is to see the split up (Basic priceEdEcs+Hcs)for these Purchase orders for the vendors. If there is no std report then please let me know how to link Purchase order table with this Condition value table in query to get the desired report.
    Thanks in advance
    Benny

    Hi,
    there is no standert report to fullfill this requierment
    you have to create this report with the help of abaer
    for that which tax code you are using its importnat thing
    for po table EKPO
    1. A524 (Normal supply point / Material) it will return condition record number for condition type.
    2. KONP (Conditions (Item)) .
    3. J_1IMTCHID (Combination of Material Number and Chapter ID).
    4. J_1IEXCTAX (Tax calc. - Excise tax rates
    5 get the IR no. from RBKP and RSEG, and get the relevant FI doc no. and goto BSET table
    for IR number  to get from table apply logic for doc type RE ,you will get fi number nad in refernce field you will get invoice number + fiscal year
    Map this by refernig on po for which grn and invoice happen
    Regards
    Kailas Ugale

  • Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

    Hello,
    I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
    I appreciate any help.
    Regards,
    Hector

    Hi,
    ME2N - In selection screen, enter Selection parameters as
    WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
    OR use RECHNUNG i.e. Open invoices and execute the report
    OR Use MB5S - GR/IR Balances

  • Please help to get onhand stock report with last purchase and billed date warehouse and item wise

    please help to get onhand stock report with last purchase and billed date warehouse and item wise

    Hi Rajeesh Ambadi...
    Try This
    SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',  
      T1.LASTPURDAT ,t1.LastPurPrc
    FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
    INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
    WHERE
    T0.ONHAND>0
    AND T0.WhsCode ='[%0]'
    Hope Helpful
    Regards
    Kennedy

  • Summary Report with 4 Dimensions and 5 Facts

    Hello OBIEE Czars:
    I have a problem.
    I am trying to make a summary report with 4 Dimensions and 5 Facts.
    Out of that only 2 Dimensions are Confirmed.
    Now when I try to bring in all the facts, I get view display error.
    I searched forum for similar issues.
    So I have tried following so far.
    1) Add other dimensions as source and set level to Total for those dims.
    - After doing this, I dont get view display error, but I get blank rows for couple of facts.
    2) I am already aggregating all the measures.
    Please help me out.
    This forum has been very helpful so far.
    Thanks.
    ~Vinay

    Hi
    This method seems fine until you run a request that includes a filter on an unconformed dimension.
    The SQL itself should be quite straightforward (see below) but the BI Server instance does not seem to be joining this data correctly after posting the 2 separate queries to the database.
    SELECT
    x.dim1, x.dim2
    x.fact1_agg_measure
    y.fact2_agg_measure
    FROM
    SELECT
    dim1, dim2
    SUM(fact1.measure) fact1_agg_measure
    FROM
    dim1,
    dim2, --UNCONFORMED+
    fact1
    WHERE
    .... .... join fact1 to dimensions as normal
    AND dim2 = 'BUSINESS_IDENTFIER'
    GROUP BY
    dim1, dim2
    ) x,
    SELECT
    dim1
    SUM(fact2.measure) fact2_agg_measure
    FROM
    dim1,
    fact2
    WHERE
    .... .... join fact2 to dimensions as normal
    GROUP BY
    dim1
    ) y
    WHERE
    x.dim1 = y.dim1
    The result set returned in Answers is firstly a correctly aggregated record plus ALL rows from the second query above ??
    Just wondering if anyone else has come across this issue?
    cheers
    Tony

  • Run Report with Pass Number and Varchar Lexical Parameter values

    Dear Sir/Madam
    Due to an urgent change required to a report I would most appreciate it if you can please advise me if it is possible to get this report working by either passing in multiple lexical parameters or one signle lexical parameter when calling the SRW.RUN_REPORT command with the following methods:
    Firstly: When calling report with a run_no and spr_cd passed in through one lexical:
    cmd_line: REPORT=D:\DEV\REMITTANCE.rdf BACKGROUND=YES BATCH=NO DESFORMAT=PDF DESTYPE=FILE DESNAME=D:\DEV\REMITTANCE.pdf
    CP_L_PARAM=RUN_NO=TO_NUMBER(28) AND SPR_CD=SUPP1
    Both with a TO_NUMBER and without, whereby I attempt to do a SUBSTR within the query of the called report to derive the RUN_NO Oracle Reports fails to accept the SUBSTR.
    Secondly: I am now trying to call the with passing two lexical parameters into the report as follows:
    cmd_line: REPORT=D:\DEV\REMITTANCE.rdf BACKGROUND=YES BATCH=NO DESFORMAT=PDF DESTYPE=FILE DESNAME=D:\DEV\REMITTANCE.pdf
    CP_L_RUN_NO=||TO_CHAR(lv_run_no)|| CP_L_SPR_CD=||lv_spr_cd;          
    NOTE: The above is an output of the actual command line and not what is passed into the command line, thus the quotes are missing. Please also note that the report is running fine with the only a hard coded RUN_NO value PASSED without the SPR_CD.
    Unfortunately this is also causing issues as the RUN_NO is a number and as you know you can only pass in strings.
    Your urgent help is required on this matter please as our client is expecting a solution this afternoon.
    Hope to hear form you soon.
    Kind regards
    Andrew Mason

    Dont Worry I've worked it out...

  • Form report with both edit and column link

    hi experts,
    How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
    Regars,
    KK

    hi,
    Here i have achieved this by making the column link and page navigation.

  • Report with material number and planned delivery time

    Is there any standard report with material number and planned delivery time ?

    Hi,
    I do not know any standard report. Please try SE16 + MARC...
    BR
    Csaba

  • I have a report with 2 queries and prompts on same object tell me how many times it request for I/P?

    Hi
    i have a report with 2 queries and prompts on same object tell me how many times it request for I/P? can any one please guide me.
    Regards,
    Mahendra

    Is this question related to Dashboards or webi ?

  • Call Report with ParamForm=yes and Rep-52007

    I have forms and report services 10.2.0.2 installed on my Win2003 server.
    Reports runs perfectly with paramform=no but when i use paramform=yes it show html param form but pressing submit query it show The page cannot be displayed page. the same report with paramform=no and hard coding paramter runs perfectly.
    This is the procedure i am using after adding hidden_action i start getting REP-52007 instead of the page cannot be displayed.....
    PROCEDURE show_report(pRptServer varchar2,pRptObj varchar2,pRptFormat varchar2,pRptPath varchar2,pRptParameter varchar2,pParamForm varchar2) IS
         repid REPORT_OBJECT;
         rep_status varchar2(30);
         v_rep VARCHAR2(100);
         vjob_id varchar2(100);
         v_reportserver varchar2(50):=pRptServer;
         v_runformat varchar2(50):= pRptFormat;
         hidden_action varchar2(1000);
         v_report_other VARCHAR2(4000) :='';
    begin
                   repid := FIND_REPORT_OBJECT(pRptObj);
                   SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,pRptPath);
                   SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
                   SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
                   SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_reportserver);
                   SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,v_runformat);
                   --SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,pRptParameter||' paramform='||pParamForm);
                   -- code for pfaction
                   hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME);
                   hidden_action := hidden_action ||'&destype='||GET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE);
                   hidden_action := hidden_action ||'&desformat='||GET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT);
                   hidden_action := hidden_action ||'&userid=' ||GET_APPLICATION_PROPERTY(username)||'/'||GET_APPLICATION_PROPERTY(password)||'@'||GET_APPLICATION_PROPERTY(connect_string);
                   hidden_action := hidden_action ||'&'||v_report_other;
                   SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'pfaction='||hidden_action||' '||pRptParameter||' paramform='||pParamForm);
                   v_rep := RUN_REPORT_OBJECT(repid);
                   vjob_id := substr(v_rep,length(v_reportserver)+2,length(v_rep));
                   rep_status := REPORT_OBJECT_STATUS(v_rep);
                   while rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
                   loop
                        rep_status := REPORT_OBJECT_STATUS(v_rep);
                   end loop;
                   if rep_status = 'FINISHED' then
                        WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||v_reportserver||'','_blank');
                        message('Finished');
                   else
                        message('Error');
                   end if;
    end;
    Edited by: Zahid Rahim on Oct 2, 2009 10:39 AM

    but when i use paramform=yes it show html param form but pressing submit query it show The page cannot be displayed page
    for Paramform=yes u have to enter values manually.
    open the following link.
    REP-52007: Parameter form format error
    http://www.orafaq.com/forum/t/97088/2/
    sarah

  • SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

    SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

    huge storage, low cost, high quality, very small and portable.
    BEST FOR THE COST, Toshiba "tiny giant" 15mm thick  2TB drive (have several of them, lots of storage in tiny package)    $100
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • Urgent: Need a docking speaker with internal battery and suitable for ipad or iphone4

    Need a docking speaker with internal battery and suitable for ipad or iphone4
    Does the following model fit those requirements?  Do you have any recommendation for me on a docking speaker?
    Philips - Fidelio Primo Docking Speaker for Apple® iPod® and iPad®
    Model: DS9/37 | SKU: 3374032
    Philips - Fidelio Docking Speaker for Apple® iPhone® and iPod® Model: DS7550/37 SKU: 2141072 
    Philips - Fidelio Docking Speaker for Apple® iPod® and iPhone® Model: DS8500/37 SKU: 3792704

    You should not need to have special IP address configurations to manage your devices and software. You can do this in the private network offered by any router, provided all devices being managed are behind that router. If for some reason you need a static IP on the network (such as for the server itself), then you can delegate one to the server in your router, but you dont need a special public IP address configuration from your ISP to set this up and make use of it.

  • Adobe CS6 master Collection disks purchased with serial Nos and used for 18months ok but now I get told "Your Trial has expired" I was never aware it was a trial? purchase was from reseller slim.nl Adobe ID registers serial No but it is now described as i

    adobe CS6 master Collection disks purchased with serial Nos and used for 18months ok but now I get told "Your Trial has expired" I was never aware it was a trial? purchase was from reseller slim.nl Adobe ID registers serial No but it is now described as invalid. What is going on?

    Issues related to serial numbers and registration can never be handled on a public forum as this one is.
    Please either call Customer Service for your region, or use web chat (link below). When using the link below, enter a product name and an issue. Ignore the provided links, and choose something like "Still have a problem?" and you'll get a link to web chat:
    Contact Customer Care

  • I have been using Photoshop and Lightroom for years, purchasing upgrades. If I join CC do I have to pay the same as someone new to PS and Lightroom?

    I have been using Photoshop and Lightroom for years, purchasing upgrades. If I join CC do I have to pay the same as someone new to PS and Lightroom?

    Adobe usually offers discounts on the full Creative Cloud (all apps) for customers with CS3 or later. However the Photography plan (Photoshop and LR) Is $9.99 pm (or local currency) and the initial benefits for CS customers who took what was then called The Photography Program (larger cloud storage) has now ended.

  • Opportunity Product reporting with # of Periods and Frequency

    We are just about to roll out out a business unit and they will be using the frequency, number of periods, and the start/close date fields on the revenue record.
    In staging, I created a test report and it 'explodes' the product to have 12 individual entires, since I picked 12 as the number of periods. I set the qty to 60 and all 11 months have 60 but the first month has 61. Is there a reason for that?

    Product: you do get the dimensions and facts for the Product object... so you'd build a report with Product information
    Opportunity-Product: you do get dimensions and facts for the Products related to an opportunity... so you'd build a report with Opportunity and Product information
    Antonio
    Bexpert, Brazil

Maybe you are looking for