Project renames sequence and all clips in the sequence when a clip is added

My project is renaming my sequences and the clips in those sequences whenever I add a clip. For example, I have a sequence called "dance section 2", which contains 20 some-odd clips with various names. When I add a clip named "drop from above", the name of the sequence is changed to "drop from above", and the name of every other clip in the sequence is also changed to "drop from above" (video, audio, stills, everything). When I add a clip named "spins", all the names are changed to "spins".
The name of the sequence is changed in both the timeline and the browser, but the names of the other clips are changed only in the timeline. In the browser, they keep their old names. The exception to this is the last clip added before the name changer. For example, if I add "drop from above" to the sequence, and then add "spins", the clip named "drop from above" is renamed "spins" in the browser as well as in the timeline, but the other clips are renamed only in the timeline.
The clips in the sequence also keep their original content - so the sequence looks the same as it did before, but all the names of the clips are changed.
This is only happening in one project. All of my other projects are working fine.
I've tried restarting and deleting preferences. I've also looked at the autosave vault for the project. The backup projects saved after a certain time all behave the same way, and the projects before that time all behave normally. I can't imagine what would have caused this, though, since I've been working on this project all day and nothing's happened to my computer or hard drive or anything.
Also, there are no freeze frames at the beginnings of my sequences (I read another thread with a somewhat similar issue and getting rid of freeze frames seemed to help that person).
I'm in FCP 7.0 on a Macbook Pro.
Thanks in advance for your help!

Welcome to the discussions...
I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
Sorry I don't have a better solution, but at least you know you're not alone.
Patrick

Similar Messages

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
Solved!
Go to Solution.

Chuck72352,
Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
Here is a great deal of information on Source Code Control Practices in LabVIEW.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Crashes when adding a clip to the sequence!

When i try to drag a clip into the sequence, a prompt comes up saying Adobe Premiere Pro has stopped working!
Help! i have a project due in a few weeks and i cant rely on windows movie maker!
I am running it on a HP Probook 450 with Windows 8.1 64 bit
Thanks

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575

I just deleted an email account on my iPhone 5s and all my notes just disappeared when I went to access them. Is there a reason why my notes would just disappear? I don't recall linking my notes to the email account I deleted.

I just deleted an email account on my iPhone 5s and all my notes just disappeared when I went to access them. Is there a reason why my notes would just disappear? I don't recall linking my notes to the email account I deleted.

I've wondered about this issue as well. I have multiple email accounts, some old ones that I don't use much, others setup for support of particular projects/groups.
I have no idea how and/or why some notes are linked to a particular account.
I'd much prefer to have the ability to link all of them to an account of my choosing, thus when emailing from a note tied to a specific email account, that account would automatically be used to perform that email.
But more importantly, why can't we be allowed to create 'folders' that function the same way as the Finder on my Mac. This file structure could then be accessed by every iOS app and device.
This type of file structure would be a god-send for the camera roll on my phone. I HATE having all my pictures in one huge clump (cloud?)! After all, who wants to live under a cloud all the time?

I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...

I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...

See How to Stop Sharing an Apple ID.
(Note that I am affiliated with that site, and some pages contain ads).

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

I just downloaded iOS 6 to my iPhone 4 and all-of-sudden, the camera on the back of my phone isn't working. Anyone know how to fix this?

I just downloaded iOS 6 to my iPhone 4 and all-of-sudden, the camera on the back of my phone isn't working. Anyone know how to fix this?

The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
Still unnecessarily difficult, but not as bad as copy/paste.
What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online?

Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation.

Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation. The tabs on bottom of all apps also work fine.
I have already tried holding down the power button and home button for 10 seconds, but no difference.

I've had this problem on and off for the last few weeks (around, but not directly related, to upgrade to 6.1...can't remember if was before or after)....I'm very convinced it's a software problem (as there have been times when the bottom row works perfectly, without any need to "press" differently or anything).
However, it seems to be a rather resilient software issue, as a full restore does not consistently fix it, and it applies to more than just the keyboard; if I open a drawing app, there's definitely a row (about 4mm up from the edge of the screen closest to home button) where I cannot draw.
It's happened 4 times now. Originally it went away with a restore from backup, then worked for 2 more days. The second and third times, it went away with a full restore (although I did two full restores in between those two restores that did nothing, so restore didn't consistently fix it)....and it seemed to return in the most random of circumstances.
I paid very close attention to what apps I was using the last time it was working so that I could spot which app, if any, might be causing the issue. I deleted several apps, I stopped using the games and many other apps. I only used three apps between it working fine and starting up as a problem again: mail, safari and messages.
I was convinced it was mail, as it happened this morning when I picked up my phone off the bedside table to respond to a new email. It was working when I went to bed. I picked up the phone when it buzzed, hit the email app, hit reply and started to type....**** bottom row wasn't working again.
However, tonight I did 2 things....one of them worked because it went back to normal (sorry, I don't know which as I was exasperated and trying a number of things).
The two things I did between a broken keyboard and a working keyboard were:
1) adding a second keyboard (English(Canada)), changing to this keyboard, and changing back
2) disabling Siri...and then turning it back on...and then disabling Siri's "Raise to Speak"
In retrospect, I wonder if it actually was the "Raise to Speak" that was putting the phone into a weird state, and might explain why the phone would just "suddenly" start behaving strangely when I picked it up. Of note, the "raise to speak" hasn't actually triggered Siri to come on in months anyway.
Regardless, the keyboard is back to normal now...and I'm just going to leave "Raise to Speak" off. I've put the keyboard back to just "English" with no alternates and Siri remains on otherwise without issue.

I keep getting an error code that my billing info doesnt match my card info. I verified with my bank, the bank card, and my itunes account and all are exactly the same. I need this crap fixed, how?

I keep getting an error that my billing info for my card doesnt match my bank info, but it does. Nothing has ever been changed. I called my bank, the card company, and all are exactly the same, word for word as my billing info in iTunes.
In fact, every time I get the error code that billing doesnt match, my card gets charged a $1.00 authorization fee. It later falls off, but it shows my card is being billed when they say they cant verify billing info.
I called Apple support and they want to charge me to get their crap together.
I need to do some updates and by a couple apps for work and am about ready to go to ANdroid if I cant get it fixed.
$##@@$%%$##$%%$$%$!!!!!!!!!!!

If you're in the US, this is usually caused by the simple fact that what the Postal Service shows as your address does not match what you're entering. Go here & see:
https://tools.usps.com/go/ZipLookupAction!input.action

My IPad will not turn on, despite charging all night and all day. The Apple pops up then goes away. What is wrong and how can I fix it?

My IPad will not turn on despite charging all night and all day. The Apple pops on but then shuts off again. It does this over and over. How can I fix this and get it up and running again?

Hey bellabeanbag,
Thanks for the question. The following resource outlines troubleshooting steps if your iPad is not responding:
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
If iPad won't turn on, or the display stops responding
Follow these steps, testing after each:
1. Turn the iPad off and turn it on again. Press and hold the Sleep/Wake button on top of iPad for a few seconds, until a red slider appears. Then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
2. Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If iPad still won't respond after you restore it
Follow these steps, testing after each:
1. If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
2. If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
Thanks,
Matt M.

HT4436 Our family iPads and iPhones and all linked to the cloud and all the "switches" in settings are turned on...so why for example can't I see on my device any of the photos my wife has taken on her device?

Our family iPads and iPhones and all linked to the cloud and all the "switches" in settings are turned on...so why for example can't I see on my device any of the photos my wife has taken on her device?

Are they all using the same AppleID?
Photo Stream - http://www.apple.com/icloud/features/photo-stream.html
iCloud: Photo Stream FAQ - http://support.apple.com/kb/HT4486

When i open facebook and only text shows and all is to the left and when i open hotmail nothing shows on my screen and other webpages have problems also when click at a link all the text comes up also to the left in my screen whats wrong ???

When i open facebook and only text shows and all is to the left and when i open hotmail nothing shows on my screen and other webpages have problems also when click at a link all the text comes up also to the left in my screen whats wrong ???

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Premiere CS4 - How can you import QuickTime (.mov) videos and which settings for the sequence?

Premiere CS4
How can you import QuickTime (.mov) videos and which settings for the sequence?
Please reply in plain English or if possible in German
Greetings from Vienna, Peter

I have not installed Quicktime.
I got a few scenes (.mov) from a Canon Eos 70d.
I want to create a short film (in Premiere CS4) with these scenes, mixed with photos and MP3 music.

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

Project renames sequence and all clips in the sequence when a clip is added

Similar Messages

Maybe you are looking for