Project Server 2010 and Report Builder 3 : the same name already exists

Hi,
I created my first report in Report Builder, and,
although it's not perfect, I tried to save it. But I get the error :
Impossible to save the report "No title.rdl". A file from another type with the same name already exists".
I tried to change the name 5 times but I always got the same error.
Any idea ?
Thanks

Hi WLID,
I have taken a sample test in my environment, it works well. If there is already another type file named “No title” on report server, then it can be saved on report server. If there is already a report named “No title” on report server, then it would prompt
that “An item named ‘http://servername/reportserver/foldername/No title’ already existed. Do you want to replace the existing item?” when we want to save the report in the same folder.
What’s the location that you want to save the report? Is it a report server or others? Could you please provide us more information about the issue? You can try to reopen the Report Builder, then create another simple report to text the issue again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

  • One particular plug-in that I am trying to install reports 'an engine with the same name already exists.' However I cannot find it, even using the troubleshooting routines

    Hi,
    I am trying to install a add-on that will enable Google to behave as if I am in the USA. When I try to install the add-on I get a message which says 'An engine with the same name already exists'. However, I can find no evidence of the add-on and I have been through the various troubleshooting routines. Anybody know of a way around this?
    I have looked at the list of installed plugins and cannot see it. So whty does does FireFox think it's there?

    Hey oks10,
    It sounds like the Bing plugin might have been corrupted. I would bet that it's still installed, but not working. Try removing it from the \searchplugins\ folder in your [http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile profile folder].
    I'd close and restart everything after you are done, then try installing it again.

  • HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

    Still  using the @mac.com   mail  address and up   to date on everything, but have not gone to Maverick.  All of a sudden Mail wouldn't let me delete.  Said that title of email was already in trash.  And sure enough it was.  Clicking on the help button on the message gets Nothing.
    The selected topic is currently unavailable.
    The topic you were trying to view could not be found.
    "couldn’t be copied to “Messages” because an item with the same name already exists."
    Any ideas.  My mail is not tied to gmail etc.. just all by it's lonesome.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists.

    each time I open Fire Fox I get this error "Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists." and
    I can't search for anything. HELP!!!
    Thanks
    Tom

    That is a problem with an extension that tries to install a search bar. The tnt2toolbar should give you a clue about which extension. You didn't add troubleshooting information with the list of installed extensions, so I can't give a suggestion about which extension is causing this.
    You can check for problems with preferences.<br />
    Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • A workflow with the same name already exists.

    Hi, whenever I am trying to create a workflow in my MOSS teamroom, I am getting the error "A workflow with the same name already exists". I am getting this error message no matter what name I give. I checked all the lists and document libraries to see if there are any workflows but that doesnt seem to be the case. I opened the site in SPD and there also no workflows are listed.
    Any insight will be appreciated.xwindow

    I know it is a bit outdated but someone might found this helpful:
    The other possible problem could be that the SPD lost connection with the Sp site for a sec but on the local machine there is a workflow with that name. ( In this case if you try to rename your workflow it gave you the same error message )
    So have a look in SPD click on All files then select Workflows and delete the workflow that is causing the problem.
    After this exercise you will be able to rename or re save your Workflow.

  • When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists.  How can I fix this problem?

    When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists."  The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same.  How can I fix this problem?
    Thanks
    Candy777

    HT2500 Error when deleting email: Apple Support Communities

  • "91590.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How do I fix this?

    The delete button in Mail gives me this message: “91590.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. The only thin that has changed is an OS update last evening. (Mountain Lion)

    Thanks...it was spooky seeing the mail in my box suddenly disappear and blank after going to Mailbox and Rebuild.  But "poof" it was up again and was able to delete without the messages telling me it had a duplicate in trash (which it did).  Solved the problem.

  • Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

    Back up all data. Rebuild the mailbox. Try again to delete the message.

  • Messages could not be moved to the mailbox "Trash - "122730.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    Cannot move messages from mail to trash.  Get the following message:    messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.

    I just started having the same problem but have found no solution.

  • TS3276 "23354.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    I'm getting this message when trying to delete an email; can't figure out what is causing alleged 'duplication'.  Has anyone seen this before?   

    I just started having the same problem but have found no solution.

  • Mac Mail, can't move to Trash : error "227845.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    this just started popping up last weekend? Any ideas?
    Mac Mail on Mtn Lion.
    POP email acct
    No changes to settings in Months
    thanks.

    if it has something to do with moving my Applications folder away from the SSD drive and to the HD drive
    HI ...
    Absolutely.
    Apps must be stored in the Applications folder on the startup disk they were downloaded to.
    It's not a permissions issue. 

  • What does this message mean? "185605.emix" couldn't be copied to "Messages" because an item with the same name already exists."  I am not able to move incoming email messages to Trash

    How can I send messages to Trash.  I have been able to do it for two years, until this morning. Thank you.

    Back up all data. Rebuild the mailbox. Try to delete the message again.

  • When clicking "Save image as" how can I get Firefox to auto add a (1) (2) etc at the end of the filename if an image with the same filename already exists?

    How can I get Firefox to automatically rename images when clicking "Save image as" on the menu, when an image with the same file name already exists in the folder??

    Hello,
    That is not a feature that is supported natively within Firefox but there are various add-ons which I think will do the job you need.
    The one I have used is [https://addons.mozilla.org/en-US/firefox/addon/web-slide-show/?src=search Web Slide Show]. This is primarily an add-on for viewing a slideshow of images when they are presented as thumbnails on a web page. However once you are in the slideshow there is a download button which will download all the images in the slideshow. It will automatically rename the images if an image with the same name already exists in the folder.
    If you don't like that add-on then here are some others that may do the same job:
    * [https://addons.mozilla.org/en-US/firefox/addon/image-download-%E2%85%B1/?src=search Image Download II]
    * [https://addons.mozilla.org/En-us/firefox/addon/image-picker/ Image Picker]
    I hope that helps. Let me know if not.
    Also I notice that you are using Firefox v23. That is now an outdated version. To get the latest security updates I suggest updating to version 24. See the support article here: [[Update Firefox to the latest version]].

  • How to create reports servers with the same name in two nodes in Reports

    Greetings
    We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
    Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
    Thanks
    Ramiro Ortiz.

    Hello.
    I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
    When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
    osfind: Found 2 agents at port 14000
    HOST: SNMVBOGOAS10.sena.red
    HOST: SNMVBOGOAS09.sena.red
    osfind: There are no OADs running on in your domain.
    osfind: There are no Object Implementations registered with OADs.
    osfind: Following are the list of Implementations started manually.
    HOST: SNMVBOGOAS10.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep2
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep2
    HOST: SNMVBOGOAS09.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep
    Any Ideas?

  • Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

    Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
    "Connection Error - Failure to get file list from server. An entry with the same key already exists."
    I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
    is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
    All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
    Issue Persists....
    Thanks in advance,
    Justin

    Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
    This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

Maybe you are looking for

  • Flex RSL issue with SDK version change?

    Hi Friends!      I am facing very crucial common problem when using Flex RSL feature. Problem:  My Custom component library is compiled with Flex 3.0 and more than 50 applications are using it. Now some of our new applications needs to use the featur

  • Solaris 10 Install problem on headless E250

    I have tried a number of times to get the latest download to install on my headless E250 using the text installer. Most times it installs the 1st cd then reboots only to report that "the file just loaded does not appear to be executable". This is tak

  • Nokia X7 Unresponsive after Install/Uninstall

    Hello, I have a Nokia X7-00.1 RM-659 running Anna 22.8. Whenever I insatlled or uninstall an app, the phone becomes unresponsive after the operation is finished for 20~40 seconds. After that, normal operation resumes. As if the phone is scanning/thin

  • Internet explorer menus on 4k monitors very very small

    When I run IE on my 4k monitor I use the control+mouse wheel capability to nicely zoom the contents of the browser window. Works great.  It would be really useful if the cursor could also size up to a usable size and for the menus, navigation bar etc

  • Sync issues, help!

    My 5th gen 30 gb ipod has a sync issue. If I delete an itunes song, that is already on my ipod, from my hard drive and try to add any new songs to the ipod, the computer takes the deleted song off my ipod. Make sense? I can't find any default setting