Project Server 2013 - User does not have permission to create a WSS site

We have Auto-Publish enabled for the project by the Owner. The issue is that when a user submits his updates, the updates are auto approved and auto-published but it also ends up showing below error to the user.
General
•User does not have permission to create a WSS site.:
◦GeneralSecurityAccessDenied (20010). Details: id='20010' name='GeneralSecurityAccessDenied' uid='---'.
•Queue:
◦GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='---' JobUID='---' ComputerName='---' GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='54a0c79c-da9b-c011-2554-5fb474e440c6'.
For more details, check the ULS logs on machine --- for entries with JobUID ---.
And in the Project Queue, the failed job type and job state are
Job type- Project Site Update
Job State - Failed But Not Blocking Correlation
We have disabled Site Provisioning for Project publish.
Can anyone point us on how auto-publish works and what all permission is required by users or owners?

Hi Goahh,
It might be that your issue has nothing to do with the rules set to auto-publish the project. Try to inactivate the auto-publish for a test project and try if the publication by itself works. Or simply try to publish a project from MS Project Pro and see
if you still get the error message.
Has it been working before?
Check also that the "Manage SharePoint Foundation" permission is enabled for the security groups in question.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

PSCONFIG - error - USer does not have permission to perform this action

After installation fo July 14 CU in the sharepoint 2013 server, getting the below error when i ran the PSCONFIG command.
"An exception of type System.Data.SQLClient.SqlException was thrown. Additional Exception information: USer does not have permission to perform this action"
My service accounts have db_Owner, db_SecurityAdmin, public, and SPDataAccess to the CONFIG DB.
Added the services to the local admin group also.
I am not sure why i am getting this error.
Any help is much appreciated.
Thank u

Hi,
Did you run SharePoint configuration wizard after applying
July 14 CU?
you need to run the wizard after installing the CU.
Please remember to click Mark as Answer on the answer if it helps you

'The logged-on user does not have permission to use this object'

Hello everyone,
I am getting the message 'The logged-on user does not have permission to use this object' while saving the Sales Order. I am logging in as a CRM user. There is an addon also running on the server, that saves some data into a user defined table when the Sales Order is saved. Is there any authoisation for users to access user defined tables.
Regards,
William

hi William,
this is an Authorization issue. provide the user with authorization on your UDT. Definition of user authorization can be found in Administration -- >> System Initialization -->> Authorizations -->> Additional Authorization Creator.... if already defined from here you can fined the additional authorization from the General authorization window.
regards,
Fidel

SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew Topp

That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

The user does not have permission to perform the operation

Hi,
Configuration: JES Q405. Solaris 10 x86.
My customer initially installed JES (Portal + AM + DS) on the same box.
Now, they have a change in their requirement. They want DS to run dedicatedly in another box.
I have successfully installed a fresh instance of DS in the new box with the same domain name (thus maintaining the same dn). I have copied over 99user.ldif and exported all the data from the original DS in the old box.
Everything is running fine. DS in the new box is able to function properly.
On the Portal and AM side, I have changed the following file:
1. AMConfig.properties
2. serverconfig.xml
3. PSConfig.properties
I have also changed the Primary LDAP entry in iPlanetAMAuthLDAPService, iPlanetAMAuthMembershipService, and iPlanetAMPolicyConfigService.
However, when I started AM (which is running on Sun Web Server), I got the following error message:
------------------- in /var/opt/SUNWam/debug/amSDK ---------------------------
05/01/2006 04:46:43:324 PM SGT: Thread[main,5,main]
ConfigManager->Constructor: root DN dc=sg,dc=com
05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
Invoking _ldapPool.getConnection()
05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
Got Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=DSAME
Users,dc=sg,dc=com"}
05/01/2006 04:46:43:410 PM SGT: Thread[main,5,main]
Invoking _ldapPool.close(conn) : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"c
n=puser,ou=DSAME Users,dc=sg,dc=com"}
05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
Released Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=
DSAME Users,dc=sg,dc=com"}
05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
ERROR: ConfigManager->Constructor: Caught exception Message:The user does not have permission to per
form the operation.
------------------------------------ end --------------------------------------------------
-------------------------- in /var/opt/SUNWam/debug/amAuth ---------------------
05/01/2006 04:47:21:252 PM SGT: Thread[main,5,main]
Directory Host: sg-dsq405.sg.com
Directory PORT : 389
05/01/2006 04:47:21:298 PM SGT: Thread[main,5,main]
AuthD initializing
05/01/2006 04:47:21:610 PM SGT: Thread[main,5,main]
ERROR: AuthD failed to get auth session
05/01/2006 04:47:21:688 PM SGT: Thread[main,5,main]
ERROR: AuthD init()
com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:709)
at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:229)
at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:494)
at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
----------------------------------------- end --------------------------------------------------
Any idea how to solve this problem? Thanks in advance!
justCheeChong
Message was edited by:
justCheeChong

check if the new DS instance has all the AM required ACI's.

User does not have permission...

Emm... actually this is jdbc, but from Microsoft ...
I have created a login with "Security Admin" role, and after i login with the newly created id in console, i can successfully issue sp_addlogin.
But the problem is, when i login with this id over jdbc and tried to create an account with sp_addlogin command, it gave me:
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]User does not have permission to perform this action.
I could logged in, but not allowed to run sp_addlogin.
Would any one pls help?? Many Thanks!
(i am using the latest jdbc drivers download from MS)

I have already checked "SQL Server and Windows", is there anything else missing in the configuriation?
(I am running SQL Server 5.0 SP3 on Windows 2000, and I created the a/c through the Enterprise Manager)
Many Thanks in advance.
Did you set the SQLServer security setting to
"SQLServer and Windows"? In the SQLServer
administration tool, that is.

The loged on user does not have permission to use this object'

A professional license user currently has Authorisation to all Customer BPs and Sales Documents.
When creating a random Sales Order, the error message
'Create POs(): The loged on user does not have permission to use this object'
is occuring. This is not occuring for all Sales Orders, this is occuring randomly.
Note that the Purchase Orders Button in the Logsitics tab in the sales order is NOT selected.
Cheers Lisa

hi lisa
there could be some changes in transaction notification from your side if there are any i would request you to please comment all the changes and then try saving the document it would definately go ahead as there has to be some change in the stored procedure ,
Regards,
Manish

Error Message' "The loged on user does not have permission to use this obje

The loged on user does not have permission to use this object-
I am entering a Sales order, which is customized, when I add the Sales order this system imformation appears.
The user has a pro-license and authorizations to all AR
Can someone tell me what my problem might be?

Thank you for your help

Error Loged On user does not have permission to use this object

Hi all,
I am trying to Export Document Data in XML format
for OSalesinvoice or oPurchaseInovice object it is working fine
But if i use oPurchaseTaxInvoice it is giving error
"An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in myDUAPI.exe "
"Additional information: The Loged On user does not have permission to use this object"
I have logged as "manger" "manager"
Dim oInv As SAPbobsCOM.Documents
        'oInv = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
        'oInv = vCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseInvoices)
        oInv = vCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseTaxInvoice)
        If oInv.GetByKey("9") Then
            oInv.SaveXML("C:\downloads\purinvtax.xml")
        Else
            MessageBox.Show("couldn't find it")
        End If

Hi Sudish,
It looks to me that the logged on user is only a CRM user. You need to have a professional user license to access Invoices.
If you're using only the DI API, please check which user name you are using to connect to DI. If you're using UI API with single sign on, the logged on user to SBO is not a professional user or don't have the correct authorisation.
Hope it helps,
Adele

"The Loged On user does not have permission to use this object" error

Hi
I've created a form that is used by a customer which allows for certain draft documents to be approved and then once approved they are created. The problem that I am having is that when the users attempt to update the changes on the form an error is logged, which is shown below:
"Error: -3000
The Loged On user does not have permission to use this object
System.Runtime.InteropServices.COMException (0xFFFFF448): The Loged On user does not have permission to use this object"
Once the update button is pressed then a User Defined Table and Drafts are both updated with the relevant modified UDFs from the form.
If I log onto their system then I don't seem to get any issues. To me it looks like a user authorisation problem but the ones who have used the form seem to have the relevant licences.
Do you have any idea why this error could be occuring?
Thanks a lot.
Steve

Hi,
Go to Administration --> System Initlization > Authorizations> General Authorizations not expand all and check if the service call is given full *Read & Write * rights to the required user.
If not then give full rights and check the add on.
Hope it helps,
Vasu Natari.

CREATE USER, User does not have permission to perform this action.

-- first, connect to the master database
CREATE LOGIN login1 WITH password='Qwerty12345';
CREATE USER login1User FROM LOGIN login1;
EXEC sp_addrolemember 'dbmanager', 'login1User';
EXEC sp_addrolemember 'loginmanager', 'login1User';After, I connect to database 'master' with 'login1User' and execute:CREATE LOGIN login2 WITH password='Qwerty12345'; - okCREATE USER login2User FROM LOGIN login2; - User does not have permission to perform this action.

Hi Vit007,
Please check the two database role: 'dbmanager' and 'loginmanager'.
CREATE USER Requires ALTER ANY USER permission on the database.
Iric Wen
TechNet Community Support
select rm.*, dp2.name AS 'User', dp1.name AS 'Role' from sys.database_role_members rm LEFT JOIN sys.database_principals dp1 ON rm.role_principal_id = dp1.principal_id LEFT JOIN sys.database_principals dp2 ON rm.member_principal_id = dp2.principal_id
role_principal_id
member_principal_id
User Role
6 8
login1 dbmanager
7 8
login1 loginmanager

User does not have permission to perform this action

Dear sirs,
i made a project (VB2010 express) connecting to SQL Server 2008 express on my PC running Windows 7 (W7): it works as expected.
Now,
i need the same project run on a different PC (running Windows XP, say WXP, with VB2010 express installed) of my private LAN, but still connecting to SQL server running on Windows7-PC. So i exported the project file to WXP PC.
After enabling TCP for SQL, opening ports and bla bla bla, i can "see" SQLEXPRESS instance (running on W7) from SqlServerManagementStudio running on WXP and i can modify, select, create tables and so on.
Then i changed connection string parameters in app.config to point to the dB:
<connectionStrings>
<add name="IlMioCapolavoro22.My.MySettings.MyCompanyConnectionString"
connectionString="Data Source=INGSERGIO\SQLEXPRESS;AttachDbFilename=z:\mycompany.mdf;Integrated Security=true;Connect Timeout=30;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
In detail, i changed .\SQLEXPRESS to INGSERGIO\SQLEXPRESS and AttachDbFilename =c:\temp\mycompany.mdf to AttachDbFilename = Z:\mycompany.mdf (c:\temp of W7-PC is mounted as z:\ on WXP PC).
IF i do F5, i get the sql exception above.
Based on what i read in other forums,
it seems that the user connecting to SQL server (when the program starts) has not enough permission to access the database: frankly speaking, i don't know which user should i add permission for (my knowledge of SQL is poor).
The SQL Server Log file doesn't show anything (or what i am able to see).
.mdf file is in a directory where anyone has all privileges in reading-writing etc.
Can anyone help me?
Thanks
Sergio

Dear Sofiya,
thanks for reply.
TCP/IP, SQLServer.exe and SQLBrowser were already configured (Windows firewall was configured by adding "listening ports"
and not by changing scope to applications... i don't think this is a problem): in fact i can connect db remotely from SSMS (all privileges).
When you say:
"make sure the
user running your DB application in other computer has permissions to access the database"
you mean "windows user" ? if so, same windows user & password are accessing the 2 PCs, they both have admin-privileges on both PCs (maybe different operating system is a concern?). I didn't
create sql-user so far because my understanding is that in windows authentication mode it shouldn't be necessary or am i wrong?
"..., we can attach the “.mdf” file the SQL Server Express and then use the same method (Connect to database with
VB) to connect the database." ---> VB doesn't let me do this, because if i try to test the connection
with the db file from VB, it errors saying: "the file is in a network path not supported for database files. A database with the
same name exists, or specified file cannot be opened, or it is located on UNC share." Somewhere i had read
that the VB EXPRESS doesn't support database remote connection, so it is necessary to do it by changing manually string connection.
Any ideas?
thank you.
Sergio

User does not have permission to alter database

I have a OperationsManager database on sql 2012 that tje original owner is domain\administrator
I can no longer log in as this user but I need to enable autogrow on this database but when i log in as another user and run sql studio as administrator, It gives me an error when trying to enable autogrow
User

Hi JonDoe,
According to the error message and your description, we need to verify if the user account you are using to enable auto grow on the database has access to modify database properties and create database permissions. You can provide it with Alter rights
on the database via the following T-SQL statement. Or you grant the Sysadmin role to the new user in the login properties.
GRANT ALTER ON DATABASE:: OperationsManager TO username (your new user account);
--- you need to note that the grantor must have either the permission itself with GRANT OPTION, or a higher permission that implies the permission being granted.
For more information, you can review the following article.
Add Any User to SysAdmin Role:
http://blog.sqlauthority.com/2008/12/27/sql-server-add-any-user-to-sysadmin-role-add-users-to-system-roles/
SQL Server Database Growth and Auto growth Settings:
https://www.simple-talk.com/sql/database-administration/sql-server-database-growth-and-autogrowth-settings/
Thanks,
Sofiya Li
If you have any feedback on our support, please click
here.
Sofiya Li
TechNet Community Support

ITunes says it is "locked or user does not have permission."

Why does it say that? I tried reinstalling, but it just keeps saying that. I don't even know how to lock it..

Your post is not very precise, do you have the exact error message.
See this article;
http://docs.info.apple.com/article.html?artnum=302398
Does this look like your problem?
If so a quick fix that often works is to start iTunes with the shift key held down, when asked to choose a library, navigate to My Music\iTunes and choose iTunes library.itl
This still leaves the original registry problem which you can fix at lesure.

VMM Shared ISO error "User account does not have permission required to open attachment"

I had this error once because the local service account was selected during installation of VMM. I have reinstalled VMM with a Domain service account and the error went away. However, the error is back.
"User account does not have permission required to open attachment '\\[servername]\VMMLibrary\server.ISO'. Error: 'General access denied error' (0x80070005). (Virtual machine ID GUID)"
I tried to create this VM on Host1 and got the error.
I then went to Host2 and was able to create the VM while using the same ISO on the same VMM library that failed on the Host1.
Both hosts have agent 3.2.7634.0 and are both running Hyper-V Server 2012 R2.
What is wrong with Host1 and how do I correct it?
Thank you.

This is a share configuration permissions issue.
http://technet.microsoft.com/en-us/library/ee340124.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Project Server 2013 - User does not have permission to create a WSS site

Similar Messages

Maybe you are looking for