Prompting for Credentials

Hi,
I go to a webpage showing the performance of fund managers http://www.trustnet.com/Managers/AlphaManagers.aspx
It does not require a username or password.
When I try and link that data into Excel 2010 using Get External Data  - From Web, it asks for credentials that I do not have.
This problem also exists in Excel 2013 but in Excel 2007, I am not prompted.
Any suggestions to fix this problem?
Thanks
Sinkers

Hi Gil,
Thanks again for replying.
Unless you have a account, until you are logged in, you will see a different page to me.
If you have the time, if you could create an account (it's free) and add a couple of funds to the watchlist you should then be able to see something like this http://imgur.com/x2uQKpS It is that table I would like to import into Excel. The URL for this table
is http://www.trustnet.com/Tools/Portfolio/Watchlist.aspx
When using the regular data import (ie not power query), unless you are logged in you will be prompted for a username and password. Unfortunately, these are not the Windows credentials that Excel prompts you for. 
When using the PowerQuery, one is not prompted for a username / password at all.
Interestingly, importing the data (without Power Query) into Excel 2010 worked perfectly until last September when it began asking for credentials and it still works fine on Excel 2007.
Many thanks again.

Similar Messages

  • Getting Prompt for Credentials When Opening InfoPath 2010 Form in Sharepoint 2010

    I have a domain user who runs Office 2010 x32 and uses a Sharepoint 2010 site daily. Lately a specific page on that site has been randomly giving prompts for credentials when opening existing documents and creating new ones. The process can be most easily
    replicated by opening the new document template in Infopath by going to Documents -> New in the ribbon bar of the SP page. Most of the time the Windows credentials for the user are passed to Infopath/Sharepoint automatically (which is normal), but on the
    fourth or fifth attempt to create a new form, the prompt appears. The user can still enter the credentials and open the blank template form, but a prompt should not appear. The user is also the administrator for that page, so I'm thinking it's not a permissions
    issue.
    The user is running IE 9 on Windows 7 Pro x64. I have performed the following:
    Reset advanced IE settings and all user cache data
    Cleared cached Sharepoint credentials in Windows credential manager
    Re-applied group policy for the machine using gpupdate /force
    Logged in with a clean temporary profile
    Logged in to another domain account using the user's Sharepoint credentials
    Cleared Infopath cache
    Re-installed Office 2010 x32
    The problem only occurs only on this particular machine. There are no Sharepoint or authentication-related errors or warnings in the application and system event logs. There are also no error messages on-screen when the prompt appears. I also considered
    the possibility of this being a performance related issue in the case that maybe Infopath was taking too long to start, causing the credential pass-through process to time out and fall back to a prompt. I ran disk cleanup, deleted some temporary files, and
    checked for excessive CPU/memory load. I didn't find any issues and doing these things did not help.
    I'm convinced there is another setting somewhere in Windows that is causing this. Interestingly it always happens after four or five attempts, never the first time. Can someone point me in the right direction?

    Hi Titan, this sounds like an IE security setting issue. Things to do:
    1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
    2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
    3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
    cameron rautmann

  • Shared folders (Windows file shares) show access denied and do not prompt for credentials

    Scenario:
    Like other admins, I log on and work as a 'standard user' (usera) with no admin rights anywhere in the domain, to perform admin tasks I have another account (userb) which I authenticate with as and when required. userb has been allocated/delegated permissions
    as required.
    Problem: 
    When trying to connect to shared folders on servers (2008 R2) using a UNC patch via Windows Explorer (Win 7 Ent.), I see an access denied error and do not get an option to supply alternative credentials.
    If I try to connect to the admin shares on the same server (\\server\C$ or \\server\e$) I get an access denied message AND get prompted for credentials. I supply my admin account and gain access as expected.
    If I check share and storage management when attempting to connect, I see that Windows is trying to connect me to each share as usera (which has no access). I understand why I get access denied at this point, but not why it can't just prompt me to supply an
    account that does have access. When trying the admin shares I also see the usera account, but I get a prompt to supply a user who does have access.
    Share permissions on the folders are for example 'Everyone' Full Control.  NTFS permissions are 'userb' has modify (read, execute, list, traverse etc) via a 'Server Admins' AD Universal security group.
    Note: If I do a NET USE from CMD and use the /USER switch, I can access the shares fine. But this is not great for accessing shared folders on the fly from various computers.
    How can I get the other shares on the server to prompt me, rather than just say access denied?
    Many thanks.

    Try to disable guest user from the server
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY
    suggestion in a test environment before implementing!

  • SQLServer Reporting Services 2005 Prompts for Credentials for a trusted domain user

    Currently the report is running in the domain AAA. Users in the domain AAA are using the report.
    Another new domain BBB and an user XXX is now created and  BBB\XXX has been given Browser access. Domain AAA and BBB are trusted domains.
    After this when the user BBB\XXX logs in and access the report, before loading the report, credentials dialog is prompted, once credentials of BBB\XXX is entered, the report is loaded.
    Why the report prompts for this additional credential dialog for the trusted domain user?

    Hello,
    Did you have get two textboxes in the report parameter panel (in the left side of the "View Report" button)? The issue is occurred when the credential of the datasource is configured with “Prompt for credentials”. Please check if you configured the credential
    with "Stored Credential" of the datasource.
    Please refer to the following thread to configure the credential.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/1564cd7a-6b7a-40f1-9f98-5c766ebfc63e/datasource-userid-and-password-being-asked-eachtime-when-report-is-generated?forum=sqlreportingservices
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • ABAP consuming Web Service in HTTPS keeps prompting for credentials

    I have a Share Point Web Service that I want
    to call in HTTPS from ABAP
    in an ECC 6.0 SAP_BASIS 700 SP 30 system. The
    following steps have been
    executed:
    BASIS work completed –
    SAPCRYPTOLIB, HTTPS Activation, profile
    parameters, STRUST certificates
    I have created the Client Proxy in SE80 for the SharePoint WCF Web Service
    The Logical Port was created in SOAMANAGER
    The issue I have is when I test the process using SE80 sometimes it will prompt
    for credentials, sometimes it won't. The behavior is very sporadic, I
    can run it once and it prompts then the second time it doesn't. This is
    especially true after a restart of the system. The user and password
    are on the RFC destination under consumer security tab.
    Any suggestions why the prompting for
    credentials?
    Regards
    Diane Szmurlo

    Hi Sekhar,
    Please see below link. It will be helpful.
    Regards,
    Sudha

  • Office Web App Prompting For Credentials Externally Only

    We deployed an office web app server and it works great internally, but whenever we try to access documents externally, we are prompted for credentials.  Even if we put our credentials in, we always get a 401 forbidden error.  Also note that
    we can access the hosting/discovery page fine internally, but not externally.  Any help is appreciated.

    Hi,
    According to your description, I think this issue is more related to SharePoint, I suggest that you could post it to
    SharePoint forum.
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Outlook Anywhere Prompts for Credentials only for Outlook 2010, not Outlook 2013

    I'm having a heck of a time with this one.  We have Exchange 2010 on premise, with our filtering through EOP.  Clients that are using Outlook 2010 Professional Plus are continuously getting prompted for credentials when off network and relying
    on Outlook Anywhere.
    I've read many threads about configuring credential manager appropriately for the internal domain and our external domain.  I can get them to authenticate just fine, and email flows, but they continue to be prompted everytime they connect again.
    Here is the kicker:  When I install Outlook 2013 on the same computer, outlook anywhere functions just fine, no problems, no authentication prompt.
    Like I said I have read a plethera of articles and threads about this, I have gone through all settings on Exchange, our edge server, our firewall, our certificate.  The MSSTD string matches our "Issued To" string.  NTLM authentication
    is configured on both the client and the server.  Appropriate settings are configured on the firewalls. 
    Anyone know why Outlook 2010 would have this problem, but not Outlook 2013 on the same computer, same user, same mailbox database?  
    Thanks in advance!!!

    I'd still Echo Ed's original question.
    Do you have Outlook 2010 patched up?  At this time you need to be on SP1, and SP2 by October the 14th.
    Also I expect you to have a recent update ontop of that as well.
    http://blogs.technet.com/b/rmilne/archive/2014/04/14/office-2010-sp2_1320_-do-you-need-to-upgrade_3f00_.aspx
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Outlook 2013 Continually Prompting For Credentials

    After migrating to Office 365 & installing Pro Plus 2013, Outlook 2013 (32-bit) continues to prompt for credentials even though it shows the mailbox as connected to Exchange.
    To stop this prompt, I've done the following:
    Removed Outlook credentials from credential manager
    Removed/recreated Outlook profiles & renamed "outlook" folder found at C:\User\"username"\AppData\Local\Microsoft\ to "Outlook.old" so Outlook will recreate the folder upon restart.
    Checked Security tab of "more settings" of the mailbox to make sure "Always prompt for logon credentials" isn't checked.
    Please someone give me guidance as to what else the issue could be.

    Hello,
    How did you set the Logon network security under More Settings on the Microsoft Exchange
    Security tab? Please make sure it's not set to a value other than
    Anonymous Authentication.
    To verify this, please follow these steps:
    1. Launch Control Panel.
    2. In Control Panel, locate and click
    Mail.
    3. Click Show Profiles, select your Outlook profile, and click
    Properties.
    4. Click E-mail Accounts, select
    Account Settings and on the E-mail tab, click Change.
    5. In the Change Account dialog, click
    More Settings.
    6. In the Microsoft Exchange dialog, select the
    Security tab.
    7. From the Login network security
    dropdown, select Anonymous Authentication and click
    OK.
    8. Click Next and click
    Finish, and then click Close on the Account Settings dialog.
    9. Click Close on the
    Mail Setup dialog, and click OK to close the Mail control panel.
    Please let me know the result.
    Reagrds,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Windows XP Machines Always Prompt for Credentials (Exchange 2013, Outlook 2010)

    I am running Exchange 2013 on Server 2012 Datacenter (VM).  Windows 7 clients with Outlook 2010 work fine.  Windows XP clients with Outlook 2010 prompt for credentials (user name and password) each time Outlook is started, and checking the "Remember
    my password" box does not prevent this from happening the next time.  The "Always prompt for logon credentials" checkbox on the "Security" tab of the "More Settings" section of the Exchange account is not checked.  I have found a myriad of posts
    with similar issues, but they all seem to have to do with SBS/Exchange 2007, and I haven't come across something that works as a solution for me.  One suggested certificate issues, and I was having certificate security warnings, but I got that resolved. 
    I am hopefuly that the fact that this only happens on Windows XP will be telling.

    Proxy settings:
    auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
    auth_param ntlm children 50
    auth_param ntlm keep_alive on
    auth_param basic program /usr/lib/squid3/squid_ldap_auth -R \
    -b "DC=domain,DC=local" \
    -D "CN=Squid Proxy,OU=TI,OU=Domain,DC=domain,DC=local" \
    -W passldap \
    -f "sAMAccountName=%s" \
    -h domain.local
    auth_param basic children 20
    auth_param basic realm Domain Internet Proxy
    auth_param basic credentialsttl 8 hours
    external_acl_type ADS children=50 ipv4 ttl=60 %LOGIN /usr/lib/squid3/squid_ldap_group -S -K -b "DC=domain,DC=local" -f "(&(objectclass=person)(sAMAccountName=%v)(memberof =CN=%a,OU=Domain,DC=domain,DC=local))" -D "CN=Squid Proxy,OU=TI,OU=Domain,DC=domain,DC=local" -s sub -W ldappass domain.local
    tks.

  • Kerberos authentication prompting for credentials in Sharepoint 2013

    Hello all,
    I think I’m a bit confused on what I should expect out of Kerberos and sharepoint.
    Following the steps located in
    http://blog.blksthl.com/2012/09/26/the-first-kerberos-guide-for-sharepoint-2013-technicians/ , I’ve setup Kerberos in my Sharepoint 2013 environment. My hope was that configuring kerberos authentication would solve the issue of users being prompted for
    credentials when they access sharepoint. I know that one way to address this problem is to tweak the IE settings by adding the site to the local intranet or trusted zones, but am I wrong in thinking that Kerberos should also authenticate the user on to the
    site? Here’s my situation:
    Previously, I had our sharepoint URL in the trusted zone and had IE set to pass my credentials through, and that worked. After configuring Kerberos, I can see the tickets on my system using klist and the security log on our web front-end shows that I authenticated
    using Kerberos.
    However, if I then remove the sharepoint URL from the trusted zone in IE, I still get prompted for credentials. If I cancel the credential prompt, I get a 401 error and the security log on the server shows a NTLM login attempt.
    As soon as I put the URL back in the trusted zone, I can access the site and the server log shows a Kerberos authentication.
    I’m I wrong in thinking that if Kerberos was working properly then I shouldn't need to have the URL in the trusted zone?
    Thanks
    Bill

    Thanks for the quick reply, Alex. At least it’s good to know it appears to be working as designed.
    Thanks again,
    Bill

  • WAAS causing extra prompts for credentials

    Hi guys,
    So when I install the WAAS mobile client onto one of our branch boxes it's causing extra prompts for credentials to pop up every few seconds. I read what I've pasted below already but our branch servers are running DNS and don't use IP's to communicate back to head office.
    Has anyone had this issue and how was it fixed.
    Thanks,
    Brent
    CSCsm78019-Cisco WAAS Mobile causes extra prompts for credentials when users access a file server by IP address, or when the CIFS client cannot use Kerberos authentication with the file server. Workaround: Use host names instead of IP addresses

    Are you running this on a Vista client? If so perhaps this release note applies:
    CSCsy72308-In some deployments, Vista clients may occasionally be prompted for credentials by the domain controller. Workaround: Verify that the domain controller has been excluded from being accelerated.
    One solution that would solve it is to simply bypass the the server in WAAS Mobile using the IP Exclusion List. If it is a domain controller it is likely that that is not a file server and therefore is not the primary need of optimization.

  • Prompted for credentials when running the Recovery Audit Report on MBAM Help Desk web portal

    I am prompted for my credentials when I try to run the Recovery Audit Report on MBAM Help Desk web portal.  I am a member of the MBAM Read Only Reports group which I specified during the web portal configuration wizard.  I would like to suppress
    the prompt for credentials.

    Add the URL to the Local Intranet sites did not work.  The Help desk  web portal is on port 8088 and it does not allow you to specify the port when you add the URL to the Local Intranet sites.  I am able to access the Reports page from the
    Help Desk web portal when I open a browser on the IIS server, but the Reports page does not open without a prompt when I open a browser on a client.  Strange.

  • Outlook 2010 keeps prompting for credentials

    Hello,
    I have just about every user experiencing an issue with Outlook 2010 where Outlook keeps prompting for credentials.  This has been happening ever since recent Microsoft Office updates that rolled out last week it seems. All my users still have connection
    to the exchange server and can send/reply just fine.  Issue occurs on both 32 bit and 64bit versions.  This prompt will appear every few seconds and is becoming a nuisance for all my users. 
    I have attempted the following with no resolution:
    - removed credentials from credentials manager
    - ran Outlook in safe mode
    - ran repairs on Office
    - completely removed and re-added users Outlook profile (profiles are manually configured)
    - made sure Office is up to date
    - configured Outlook account on freshly imaged PC

    Hi,
    For this issue, you can first try some suggestions in this forum content:
    Why does Outlook keep prompting for password
    Especially try NTLM Authentication to check the result.
    We have received some report about this issue since the February 10, 2015 update for Outlook 2010 (KB2956128). If you have installed this update, please note we have realized this issue and once there is any update, I'll let you know.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Outlook prompts for credentials when left open for multiple days

    Hi,
    We have a system setup with Outlook 2010 on it (connected to Exchange Online) and a 3rd party piece of software that interacts with it to send and process incoming messages.  This system remains up and running with no user interaction indefinitely. 
    The problem we're having is that after about a week or so, Outlook stops processing emails and prompts for credentials.  Outlook has been set to remember the password (and it's not an issue of the password being expired).  Is there a setting to stop
    this (I'm assuming it's Exchange that's the culprit)?

    First of all exchange online is not the culprit in this case. Can you check what method you're using to authenticate the user? ADFS? DirSync with Password Sync or cloud identitiy? Once checked please make sure that the time interval setup for login prompt
    once the user account is inactive is setup unlimited for this user. Thanks.
    Kindly Mark this as answer if found helpful. Thanks.
    Regards, Riaz Javed Butt | Consultant Microsoft | mstechtalk.com

  • Exhcnage 2013 Migration - User keep keeping prompted for credentials

    Hello,
    I am migrating all on-premise exchange 2010 SP3 to Exchange 2013 SP1. I am testing mailbox migrations, each mailbox that gets moved to 2013 the user keeps getting prompted for credentials. I have read several posts in the forums yet none which solve my problem.
    Can someone point me in the right direction. All 2013 setting are currently at default.

    Thank you for your help and your quick response.
    Here is the autodiscover test. When I move the mailbox to 2013 its picks up the 2013 URL. In this output mail.myserver.com is the hostname of my 2013 cas.
    Also noticed the following in the server field under account settings.
    <?xml version="1.0" encoding="utf-8"?>
    <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
      <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
        <User>
          <DisplayName>2013test</DisplayName>
          <LegacyDN>/o=mycompany/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=2013test436</LegacyDN>
          <AutoDiscoverSMTPAddress>[email protected]</AutoDiscoverSMTPAddress>
          <DeploymentId>91ce898c-65a0-402e-be70-622d0a31f7c3</DeploymentId>
        </User>
        <Account>
          <AccountType>email</AccountType>
          <Action>settings</Action>
          <MicrosoftOnline>False</MicrosoftOnline>
          <Protocol>
            <Type>EXCH</Type>
            <Server>[email protected]</Server>
            <ServerDN>/o=mycompany/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
            <ServerVersion>73C08391</ServerVersion>
            <MdbDN>/o=mycompany/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
            <PublicFolderServer>mail.myserver.com</PublicFolderServer>
            <AD>nohdomp1.domain.LOCAL</AD>
            <AuthPackage>Anonymous</AuthPackage>
            <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.LOCAL</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-sms>
            <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmCreating>
            <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmEditing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-extinstall>
            <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
            <ServerExclusiveConnect>off</ServerExclusiveConnect>
          </Protocol>
          <Protocol>
            <Type>EXPR</Type>
            <Server>mail.myserver.com</Server>
            <SSL>On</SSL>
            <AuthPackage>Negotiate</AuthPackage>
            <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.LOCAL</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-sms>
            <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmCreating>
            <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmEditing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-extinstall>
            <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
            <ServerExclusiveConnect>on</ServerExclusiveConnect>
            <EwsPartnerUrl>https://mail.myserver.com/ews/exchange.asmx</EwsPartnerUrl>
            <GroupingInformation>NebraskaOrthopaedicHospital</GroupingInformation>
          </Protocol>
          <Protocol>
            <Type>WEB</Type>
            <Internal>
              <OWAUrl AuthenticationMethod="Basic, Fba">https://mail.myserver.com/owa/</OWAUrl>
              <Protocol>
                <Type>EXCH</Type>
                <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
              </Protocol>
            </Internal>
            <External>
              <OWAUrl AuthenticationMethod="Fba">https://mail.myserver.com/owa/</OWAUrl>
              <Protocol>
                <Type>EXPR</Type>
                <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
              </Protocol>
            </External>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>mail.myserver.com</Server>
            <SSL>On</SSL>
            <AuthPackage>Ntlm</AuthPackage>
            <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.LOCAL</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-sms>
            <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmCreating>
            <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmEditing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-extinstall>
            <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>mail.myserver.com</Server>
            <SSL>On</SSL>
            <AuthPackage>Negotiate</AuthPackage>
            <ASUrl>https://mail.myserver.com/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://mail.myserver.com/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://mail.myserver.com/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://mail.myserver.com/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.LOCAL</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-sms>
            <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmCreating>
            <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-tmEditing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.LOCAL</EcpUrl-extinstall>
            <OOFUrl>https://mail.myserver.com/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://mail.myserver.com/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://mail.myserver.com/OAB/4b0a14e4-d177-415f-9acf-b51b966b6dd8/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
          </Protocol>
        </Account>
      </Response>
    </Autodiscover>

  • Multiple Prompts for Credentials

    I know there are multiple posts about this and I have tried all fixes with no luck.
    When users go to sharepoint they are prompted for credentials 3 times. If they enter their credentials they are able to hit the site fine. If they hit cancel all 3 times they still get to the site.
    Now here is the weirdest part. If a user hits one of the WFE's directly they are not prompted for credentials. They can immediately try to go to the main address for SP and they get prompted. Out layout is below.
    I am at wits end on this and pulling my hair out. Nothing I try has worked. Any and all help is appreciated.
    SP Layout
    https://ozone.osumc.net - Main URL
    Servers: OZONE-SEARCH OZONE-2 OZONE-3 OZONE-4 OZONE-SQL
    This all worked fine with no issues as of last week. Over the weekend this started happening. No windows updates have been applied.

    It sounds like you have servers behind a load balancer? Could be that one server lost its trust with Active Directory, or that it's Kerberos token expired and didn't renew for whatever reason.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for

  • Total Lack of Customer Service - New Phones Elsewhere

    Fellow managers around my company have been following (and often TRYING to contact me) during my ongoing Droid Charge fiasco (constant re-booting, involuntary factory resets, lack of of customer service, etc.) and as result our company placed an orde

  • Unable to format external drive as Mac OS Extended

    I just bought a WD 3TB My Book Essential external hard drive so I can free-up space on my Mac Mini. When I used Disk Utility to erase the data and reformat the drive as Mac OS Extended, I got the following error: +Disk Insertion+ +The disk you insert

  • Printing in java - text positioning

    Hi there, I need some pointers in the right direction please. I need to print a page out to fill in a pre-printed sheet. The data to go onto the sheet is purely numbers, but the pre-printed sheet is not in a table format (the boxes where the data goe

  • Tomcat error when run through Eclipse IDE :- java.util.MissingResourceExcep

    Friends, I get the following error while running the tomcat from my eclipse IDE(com.sysdeo.eclipse.tomcat_3.2.1) . If i try running my tomcat with an application through the command line , it runs fine .... can anybody please guide .? The error is as

  • .dbc file significance

    When I start working on the Anil Passi's tutorial for OAF framework, there is a mentioning for .dbc file..What is the significance for this file? I saw in my local desktop ap607sdb_fwk11i.dbc..Can I use this for learning through ANil Passi's lessons?