Provide skill selection to agent prior to answering call

Hello,
I am rebuilding a call center script for a customer.  The base model is that there is going to be one CSQ involving three skills.  Skill A - General,  Skill B - Dept1, and Skill C - Dept2.
The Supervisor would like the agent presented with a call to see the skill description so they are aware of the type of calling they are answering.  Right now I looking to display this information over the phone display.  Ideally I would like to figure out a way to do a pop-up on the computer (much like an incoming email).
UCCX Ver 8.5.1
Thanks        

OK, got it, but again the routing is not based on skill, but CSQ, so by the time the call gets to the agent the CSQ drove the call routing not skill, so if the agent wants to be able to see which skill were selected then you need to construct your CSQ per skill rather than combining the skills into a singe CSQ, for example:
skill 1 - language
skill 2 - call reason
skill 3 - country
if customer is asked for 3 inputs and based on it you need to route to skilled agent then you would build 1 CSQ with all 3 skills, but the agent should not care which option was selected as he/she is part of all three and the CSQ name should reflect it, i.e. English-Support-US. 
Chris

Similar Messages

  • UCCX Agent Desktop Auto Answering Calls

    Has anyone heard of a situation where CAD is auto answering calls?  The users are reporting it sporadically only when they get a off a call and a call is waiting in queue, the call will automatically connect right after they hang up the first call.  
    Sounds bizarre, I know.  
    Short of restarting services, i'm not sure where to go with this one.  I've had a couple clients report this issue to me.  They are running UCCX 9.0 (2) SU1
    Thanks.  

    We've had a similar issue.  While the agent is talking, the CAD changes state to "work" i.e. it thinks that the call has been hung up.  It then goes to "ready" while the agent is still talking.  As a result, when the agent hangs up their call, they are in "ready" state and are given the next call immediately.
    You may want to check if this is the case with the agent state.
    If the state changes are happening like this, check that the handset is snugly sitting on the cradle, reboot the client PC and have them log off/on the phone.
    Be sure also to check the CAD agent logs.  I'm about to check ours now to see if they show anything up.

  • I do not recieve texts from iMessage friends when I am not connected to the internet(wifi nor 3G).  Am I supposed to, if so is there a setting on my part to fix this?  Even the techs at my provider can not give me a definative answer.

    I do not recieve texts from iMessage friends when I am not connected to the internet(wifi nor 3G).  Am I supposed to, if so is there a setting on my part to fix this?  Even the techs at my provider can not give me a definative answer.

    iMessage uses data not your messaging plan. You need to have either Wi-Fi or cellular data turned on to use iMessage

  • Agent detail report shows calls outside the time range

    Hi all,
    I have an UCCX 7.0 SR5 call center. My problem is that the agent detail report is showing calls outside the defined time range on the historical reporting client.
    Those calls start slightly after the end time difined in the HR client.
    Is there any explanation for this behaviour?
    Best Regards,

    Hello Hatem,
    I think that might be expected. In the Agent Detail Report the call start time is the time the call rang at the agent's extension and not necessarily the actual time the call started. So the report will show the call was really received within the time range but it rang the agent slightly after that time.
    HTH
    Pablo

  • CAD Agent Desktop - Making 2nd call to Back office staff

    Hi All,
    Does anyone have a solution to the following question from a customer?
    “Whilst an agent is talking to a caller, it would appear that the only option available to make a second call at the same time ie. in the case where a member of call centre staff wishes to talk to the back office team whilst the customer is on hold, the agent can put the caller on hold using CAD, however they would need to press the “New Call” button on the physical telephone to dial the 2nd number as the “Make Call” feature is not available within CAD (whist the call is on hold).
    The agent will frequently make a 2nd call whilst on the phone to a customer. Not being able to use CAD to make this second call will cause a lot of confusion! Is there any way around this problem?”
    I know that the ‘make call’ button is disabled when the agent is in a ready state, so how do they make a 2nd call if need? I suppose they could place the caller on hold and go not ready but I’m not sure if CAD allows this (I’m away from a test lab to check) and this would affect the agent stats.
    Or perhaps they could initiate a supervised transfer discuss what they need to with the back office staff member then cancel the transfer and use the alternate button to switch between caller and back office staff?
    Any suggestions would be grateful.
    Thanks Chris

    Using a supervised transfer and then cancelling out of it is the only option with CAD for now. I suggest that you submit a feature request through your Cisco AM to resolve this.

  • One agent not receiving the calls in UCCX7.0

    Dear All,
    Greetings!!
    We have UCCX 7.0(1)SR05_Build504 and call manager UCCM System version: 7.1.5.30000-1.
    - We have many team with basic IVR options for customers, one of the Team called "customer service". The customer service team have 6 to 8 agents. All have same CSS, partition, CSQ, Resource Groups and Team mapping.
    - The issue is, only one agent not able to receive the calls in the team. The user is properly configured in CSQ also the resource group and team configuration is fine. we have compared with working user and found all config is fine.
    - The user is logged in properly and always in ready state in CAD, but no call routed this agent and no error message observed on the agent side.
    - The user extension is 5154 and the user configured on call manager is Dennis. Fonseca. The UCCX Resource name also showing properly.
    - I have collected the MIVR logs and i can see the extension 5154 and agent name. The calls are routing. am not have much idea about MIVR log analzis, so icouldn't find the exact issue.
    - Please find the MIVR logs and help me to understand the issue or why the calls are not routing to this agent even logged and ready mode???
    Working user name is -
    5158 - Gabriela.Quesada
    Non-working user name is -
    5154 - Dennis.Fonseca
    MIVR Logs attached.
    Thanks & Regards,
    Naveen.S

    Hi All,
    Thanks a lot your advise on this... the issue has been fixed after restarting the CRS engine..
    53278074: Jan 13 09:42:23.568 GMT-600 %MIVR-SS_CM-7-UNK:returning null from ContactMgr.offerResource(Dennis.Fonseca) because esds.size() is 0
    Basically, the UCCX Engine is not allocating the Agent (Dennis.Fonseca) to the Queue and that is the reason why is not receiving any calls even the Agent is “Ready”
    Thanks & Regards,
    Naveen.S

  • How do I pause book while answering call

    When listening to a book on overdrive, how can I pause it to answer call?

    Hi Neophyte30
    Try double-clicking the Click Box objects to edit the
    properties. After you do this, look to the right of where you
    specified the E-Mail address or the URL. See that button with the
    down arrow? Click it and you should see some possibilities. If you
    are linking to an E-Mail address, all you should see is "Continue
    playing project". If you are linking to a URL, you should see
    options for "Current, New, Top, Parent" and after choosing either
    "New, Parent or Top", you should then be able to click again and
    DE-select the "Continue playing project".
    Give that a go and I'm fairly certain you will have exactly
    what you are hoping for.
    Cheers... Rick

  • CUIC reporting: handled calls greater than answered calls

    Hello,
    We met the following problem in Cisco Cuic reporting 8.5.4 for cisco UCCE 8.5.3.
    We use only the stock reports. In call type historical all fields we met a strange situation for a simple inbound script:
    - the numbers of handled calls is greater than the number of answered calls. This is vey unusual because any call
    is first answered and only after that is handled or not by the agent. So the handled condition supose to be first answered.
    Any ideas? What could be the cause for additional handled calls?
    Also we have problems between the number of handled calls in Agent Team historical all fields and the number of handled calls
    in Call type historical all fields. Should not be the same number in both reports ?
    The definitions for answered, handled, offered are very simple and they lack essential info in describing the situations
    they treat. The whole documentation for enterprise misses many times essential info and the only source of real
    info is others knowledge and experience.
    Any help is wellcome.
    Best regards,
    Marius

    Answered is incremented when the Agent picks up the call (or received the activity, in the case of EIM).
    Handled is incremented when the call (or EIM activity) completes.
    Handled will be incremented regardless of whether the call is transferred/conferenced/consulted or not.
    As others have mentioned, Answered and Handled counts can be incremented during different intervals depending on the length of the call. The only way I can think of where that would be the case here would be if your agents are handling EIM activities... They could have 5 open emails in their inbox at the end of the day - these 5 open emails would be considered Answered, but not Handled.
    If this isn't from non-voice activities, then perhaps you have some system issue causing the problem.
    -Jameson

  • Unable to use headset button to answer call

    Version = Skype for Android 5.7.0.13054Phone = Samsung Galaxy 4Headset = Plantronics Voyager Legend bluetooth I have the headset working OK with the phone and can answer calls to the mobile number by pressing the button on the headset, but have been unable to answer any calls to Skype this way.I have paid for a Skype phone number and would also like to be able to answer Skype voice calls from the headset, but have not been able to get this to work.  I always need to answer the call from the phone - the headset works OK once I have done this.Has anyone managed to get a similar setup working so that Skype voice calls can be answered by pressing the button on the headset?  Or, does anyone have any idea how to overcome this? Thanks Richard

    Sometimes this revives those buttons.
    With the battery and AC adapter removed, close the Power switch for 30 seconds.
    Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
    -Jerry

  • Unlock phone to answer call or text

    I don't have to unlock my phone to answer calls or texts. I would really like to have to do that, someone answered my phone the other day, I was not happy, no harm was done but I'd like to prevent it in the future. How can this be done?

    I thought I made that pretty clear in both my response.
    For text message you would have to unlock your phone to read your text if it is locked - which is what you wanted.
    For the phone calls you don't the only option is to swipe to answer.- So no it can't be done.  You can test for yourself, lock your phone and use another phone to call yourself - you see that there is no option to unlock your phone.
    I also provided a link for you to send apple a feedback.
    have you done that?

  • Why my iphone 5s voice mail answer call first and my iphone second.

    why my iphone 5s voice mail answer call first and my iphone second.

    Hello celazopdef,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning cellular issues:
    iPhone: Troubleshooting issues making or receiving calls
    http://support.apple.com/kb/TS3406
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

    IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
    It might have happened when I was accessing my camera bypassing the lock screen!
    All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

    I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

  • Answering calls from car no longer works with iOS 8 update

    After updating the firmware to iOS8 my iPhone no longer answers calls from my car bluetooth audio. I get the call alert but the car answer button is disabled.. I am using standard bluetooth communication and not the A2DP technology.
    Is anyone facing a similar issue?
    I am using iPhone 5s

    I know that I had to delete the entry in the car's Bluetooth setup (for Steve's iPhone - replaced and iPhone 5 with 6) and then go through the setup again to get it to work. Perhaps that would solve your issue?

  • Ready to throw my iPhone in the bin - answering calls

    Hi guys, can anybody help me with how to fix my problem? Basically, I cannot answer my phone properly half the time, because of the "Remind me" and "Respond with message" buttons.
    When I take it out of my pocket, these buttons are accidentally activated because the screen rubs against my pocket. It's not rare - it's about half the time. The phone stops ringing and I have to dismiss the screen, its a nightmare. Worse, I have even on several occasions accidentally declined calls with a response, it is so embarrassing to call back and explain the reason is my iPhone. When the other caller uses Android, the laughter back is painful.
    I thought that it's common sense and basic design, that when a touch-screen phone is locked, no simple buttons should become active in case they are accidentally pressed in pockets. Isn't this why you have slide to open/answer call/open camera etc?
    After so many feedbacks, and so many updates to iOS, I am really annoyed this problem is not addressed.
    Perhaps there is some setting or feature I am missing? I just want to remove these buttons or make them sliders. The best I have found at the moment is activate Touch ID or passcode and disable the "respond with message" button, but the problem remains with the "remind me" button??
    I have submitted feedback to Apple so many times, to please add a setting to disable BOTH these buttons AND to make sure it works with people who don't want to use Touch ID or passcode. After so many feedbacks and so many iOS updates, I think maybe I am missing something and I am not using my iPhone properly as surely such an essential feature can't be this badly designed. Can anyone help me please?

    flim_flam81 wrote:
    It's not odd at all. It's called the 'tip of the iceberg' effect.
    No-one at the dinner table had reported it on Apple Support Communities either - not even myself ! This does not mean we have not met with this problem, or are liars or fantasists.
    There are all kinds of bugs or issues or problems which so few people report. It does not make the problem any less real or popularly encountered or troublesome.
    When there are problems that affect a large number of people it is reflected in the forums very quickly. For example:
    You will note that it is 2 1/2 MILLION views and almost 13,000 posts. Before the thread was locked 3 years ago. This was an actual bug, and it affected less than 1% of iPhone users, but still got the response you see. And this was a time when there were less than 100 million iPhones in use. Now there are almost 600 million. So if yours was a problem for even a tiny minority you would see lots of posts about it.
    You need to change the way you use the phone to avoid the problem. No point in getting a different phone, either, because all smartphones handle this the same way.

  • Does Apple iPhone 4 Dock support answering calls through apple headphone

    Does Apple iPhone 4 Dock support answering calls through apple headphone? or is the audio out just a simple audio out that cannot interact with the headphone cable remote control, e.g. answering calls , skipping to next song as we used to as normal?

    From my experience, whichever one is connected last reigns supreme and takes over.
    When I walk to my car, I have my headphones in, and when I plug it into my car dock (with the headphones still plugged in and music still playing), the music switches from the headphones and pumps through my car stereo.
    Then when I get out of the car and plug my headphones in (with the car dock still attached and playing music), the headphones take over.

Maybe you are looking for