Proxy configuration in AIR Application
Flex/AIR Applications use Default Browser's Connection
setting(Proxy configuration) to connect to Server/Remote Systems.
This mechanism is ok.. in case of Browser based applications.
But, in case of Desktop based AIR application, my application may
need to connect to some Non-Standard ports(not 80,443).. For that I
need to use a different proxy setting than that of my browser.
But, I didn't find any mechanism to set the proxy
configuration in my application.
Can anyone please suggest me the workaround for this??
Hi Sendhil,
Plz check:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=t…
How do you activate ABAP Proxies?
Regards
GB
Similar Messages
-
Wap (proxy) configurations for Midlet applications
Hello,
I developed MIDP application which need internet access suing http protocol. The application is a client for a web service.
The application run perfectly on the emulator but it does not work on my mobile phone although my phone has internet access and I can browse the web without any problem.
How can I tell the application about the settings of internet access??
Thanks in advance,
Motaz K. Saad
http://motaz.saad.googlepages.com/Thanks much for the feedback. We're using the default settings on the HTTP rule we have set up for the portal on the ISA server. We'll be looking into the details of what the default rule settings are, however we did find a note in the Microsoft Knowledge base detailing with the ISA server screening high bits in URL strings for Outlook Web Access (OWA). This generates a similar error message. Here is the link to the detailed note on the Microsoft web site:
http://support.microsoft.com/?scid=kb;en-us;837865
Also,we are going to be applying the SP1 upgrade to the ISA server (released in March) to see if this might be some type of issue that may have been identified and corrected by the service pack. We'll see what happens with that.
One area where we can recreate the problem at will is when we set up the system landscape configuration. We can navigate to a system configuration object, however when we attempt to right click to edit the object we get the error. There are other circumstances where we get errors but that is one that occurs for sure. Anyone have any idea as to what might be special about that type of transaction??
Thanks again.
Rich -
Can Air application connect behind a proxy server
Can Air application connect behind a proxy server using HTTP
or SOCKS.
thanksI tried it but its not working. I am using XMLSocket
var socket:XMLSocket = new XMLSocket();
socket.connect( server, 5000 );
It returns "no response from server", It works fine if i
directly connected to internet.
My browser is able to connect to internet means all
configurations are fine. -
ADFS 3.0 - Web Application Proxy configuration Issue
Hi All,
We are in the process of implementing ADFS 3.0 published to the internet for o365 Federation purposes.
The setup consists of the following
- 2 x windows 2012 R2 running ADFS 3.0 ( only one server presently installed and configured though)
- 2 x Windows 2012 R2 Running Web Application Proxy ( only one server presently installed and configured though ).
There is an F5 Big-IP load-balancer for both internal and external interfaces and it has been configured after a lot of issues with the SNI part on the F5.
So, in short the setup is now a single server hosting ADFS 3.0 using SQL and a single WAP server, however the traffic to these servers are still going through the LB.
Now the issue is that i cannot complete the installation/configuration of the Web Application Proxy server. There is a firewall in between our DMZ and the internal network. I can reach the internal services via the following url and telnet on port 443
to the federation service as well. (ports for 443 and 80) are opened to internal network on the load balancer ip . I can reach https://fs.domain.com/adfs/ls/idpinitiatedsignon.aspx and federationmetadata/2007-06/federationmetadata.xml location as well
from the Web APplication proxy server without any issues or certificate prompts at all.
When i do the configuration for WAP, i use the same account which was used as a service account for the ADFS service internally. If i use a local admin account, it errors out with another message stating the connection was closed.
The certificate on the internal server along with its private key was exported and has been imported on the WAP server . This is not internal CA, instead we are using DIGICERT SSL with SAN Names for enterprise registration and work folders. Hence the CA Chain
issue is ruled out and also this is not a wild card certificate.
When the wizard starts configuring, it does establish the trust with the federation service which is shown up in the event viewer with EventID 391 within 15 seconds i get another event id 422 which states that it cannot retrieve the proxy configuration
and eventid 276 on the Federation server which states the authentication failure. this continues until the servers stops to try configuring the wizard.
I have read all the available threads on the 3.0 WAP installation /configuraiton problem and tried all the steps possible but i am still stuck with this issue.
There is one more part that i noticed on the ADFS server, that the self signed services for the token-encrypting and token decrypting are self-signed certificates. Also, in the certificates it was showing up as not trusted. and i installed them to the TRUSTED
ROOT CERTIFICATION STORE after wich i cannot see any private key showing up when viewing the certificate which means i cannot get the MANAGE PRIVATE keys option when right clicking on the cert to assign read permissions for the ADFS service account.
Should i assign the same SSL sertificate (SAN based for enterpriseregistration & Workfolders) to the token-encrypting and token-decrypting services in ADFS console or should i leave them as self signed ? I did read that self-signed is not recommended for
production environment ? If not the same certificate what are the requirements for the certificate ?
I am not sure what I am missing in the configuration that is causing this issue. The WAP servers are not part of the domain and have also ensured the time synchronization between the domain machine as well.
The service name is fs.domain.com on both the internal and external DNS ( we have domain.com as a zone in DNS internally as well ). I am able to Authenticate inside and from the WAP server when accessing the link.
Could it be a Load Balancer Configuration ? [i will try eliminating this from the configuration]
Let me know if there are any options that i can try to resolve this and get the configuration working.
Cheers,Does the load balancer pass the certificate session through to the ADFS server or are you offloading SSL. SSL offload does not work with WAP/ADFS integration (at least at the time of writing it does not).
Can you try through the load balancer with SSL pass through turned off please.
Also as ADFS 3.0 (Server 2012 R2) uses Server Name Indication (SNI) then any health checks that run on the load balancer must support this, so if they do not then you need to use TCP 443 checks for a listening port, as doing a standard HTTPS check will fail,
and if the load balancer fails its checks whilst you are configuring ADFS that might be a reason why it has gone offline for you (error 442 is to do with failure to swap client certificates between WAP and ADFS).
Finally, check the June update to Server 2012 R2 (http://support.microsoft.com/kb/2964735) as that has fixed some certificate issues with multiple servers for WAP and ADFS when you don't have the
2012 R2 AD schema in place.
Brian Reid
Exchange MVP and Exchange and Office 365 Certified Master
www.c7solutions.com
Brian Reid C7 Solutions Ltd (www.c7solutions.com) -
Adobe AIR Application certificate issue - Urgent
Hello,
I have created my AIR application in flex 3 using AIR 1.0. I have created it with local air certificate and dispatch the air application to the client. Now after 2-3 months i have got some new features to be added into that application for same client. I have lost my original certificate using which i have created the air application installer. Now if i am creating air with new certificate then it gives me following error:
This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
Can any one have any idea for how to get certificate recreated. Here certificate is not licenced one it was local. And my application is using auto update feature. So if i change the certificate then already installed application will never get update message. ITs a deadlock situation.Help me.
Thanks
DhwaniSamsung Tab 3 features x86 architecture, did you try an Android-x86 build? (add -arch x86 to compiler flags)
-
Calling a created Java file from an AIR application
I've got a guy helping me out who is creating a Java file that outputs an F1 keypress to the operating system/desktop (which Flex alone can't do.
My problem is I need to know how I can call/activate this file from within an AIR application. I want my app to be ready for when he has created it for me but I've never used Flex to call an application so I would not know what classes need to be called or if any script would be required.
In the following simple code lets say if the Java file itself was called keypress.java (or whatever file extension a java file has) what code would need to be added in, including imported classes, to make the click of the button activate this java file?
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Button id="KeypressButton" label="Button" horizontalCenter="0" verticalCenter="0" click=""/>
</mx:WindowedApplication>I think one solution is to use a Java proxy to call the Web services.
In the Java proxy you can have a method that accepts the user/pass and sets them correctly for the Web service.
Then you expose that Java proxy as a data control (right click, create data control) - and then create a page that invokes that method.
(For the basics of working with a POJO data control see: http://blogs.oracle.com/shay/2009/07/java_class_data_control_and_ad.html ) -
Problem in full screen mode air application
Hi All
I am facing some problem in creating an air application. I used fullscreenmode .FULL_SCREEN_INTERACTIVE to maximize the window on load the application was succeeded in some extent. But there is one problem one bottom bar is coming just under the window. can anybody please help me. I am attaching the preview with this.
Thanks and regardsHi M*A*S*H 4077 thanks agan for your reply sending you the total code i used in my project.As I am a new coder my codes are not in abc please try to understand.please have a look and if u want to see my componentcode then also i can send code.component i only used in the video part.
thank you
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:components="components.*"
verticalAlign="top"
backgroundColor="white"
borderStyle="none"
borderThickness="0"
creationComplete="init();"
baseline="0"
paddingLeft="0" paddingRight="0" paddingTop="0" paddingBottom="0"
initialize="service.send()"
applicationComplete="fullscreenmode()"
backgroundGradientAlphas="[1.0, 1.0]"
backgroundGradientColors="[#CCCCCC, #090909]"
backgroundImage="@Embed(source='assets/background/background.jpg')"
>
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import flash.display.Sprite;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import mx.rpc.events.ResultEvent;
import mx.effects.Iris;
import mx.effects.easing.*;
import flash.utils.Timer;
[Bindable]
public var secondsTillDue:int=100;
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
public var bol:Boolean;
[Bindable]
private var images:ArrayCollection;
[Bindable]
private var centerpoint:Number;
[Bindable]
private var currentIndex : Number = 0;
public var myTimer:Timer;
[Bindable]
private var mainwidth:Number;
[Bindable]
private var mainheight:Number;
private function init():void {
myTimer=new Timer(1000);
myTimer.addEventListener(TimerEvent.TIMER,warnIfClose);
myTimer.start();
// Initialize the uldr variable which will be used to load the external
// playlist XML file.
uldr = new URLLoader();
uldr.addEventListener(Event.COMPLETE, xmlCompleteHandler);
uldr.load(new URLRequest(PLAYLIST_XML_URL));
/* function setFullScreenDisplayState():void{
stage.displayState=stageDisplayState.FULL_SCREEN_INTERACTIVE;
public function warnIfClose(event:TimerEvent):void{
secondsTillDue=secondsTillDue-1;
if(secondsTillDue==90){
lab1.setStyle("hideEffect", fade);
lab1.visible=false;
clockpan.visible=false;
clockpan.includeInLayout=false
clock1.setStyle("hideEffect", fade);
clock1.visible=false;
else if(secondsTillDue==88){
mainbox
imagePart.setStyle("showEffect",fade);
imagePart.visible=true;
imagePart.includeInLayout=false;
else if(secondsTillDue==83){
imagePart.visible=false;
imagePart.setStyle("hideEffect",fade)
videoContainer.visible=true;
playVideo();
private function fullscreenmode():void{
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
mainwidth=stage.width;
mainheight=stage.height;
centerpoint=stage.height/2;
private function serviceHandler(event:ResultEvent):void{
images = event.result.gallery.img;
var timer:Timer = new Timer(15000);
timer.addEventListener(TimerEvent.TIMER,nextImage);
timer.start();
private function nextImage(event:TimerEvent):void{
if (currentIndex < images.length - 1){
currentIndex++;
else {
currentIndex = 0;
import mx.controls.ProgressBarMode;
* The amount of time between calls to update the playhead timer, in
* milliseconds.
private const PLAYHEAD_UPDATE_INTERVAL_MS:uint = 10;
* The path to the XML file containing the video playlist.
private const PLAYLIST_XML_URL:String = "playlist.xml";
* The client object to use for the NetStream object.
private var client:Object;
* The index of the currently playing video.
[Bindable]
private var idx:uint = 0;
* A copy of the current video's metadata object.
private var meta:Object;
private var nc:NetConnection;
private var ns:NetStream;
private var playlist:XML;
private var t:Timer;
private var uldr:URLLoader;
private var vid:Video;
private var videosXML:XMLList;
* The SoundTransform object used to set the volume for the NetStream.
private var volumeTransform:SoundTransform;
* Constructor
private function initApp():void {
// Initialize the uldr variable which will be used to load the external
// playlist XML file.
uldr = new URLLoader();
uldr.addEventListener(Event.COMPLETE, xmlCompleteHandler);
uldr.load(new URLRequest(PLAYLIST_XML_URL));
* Once the XML file has loaded, parse the file contents into an XML object,
* and create an XMList for the video nodes in the XML.
private function xmlCompleteHandler(event:Event):void {
playlist = XML(event.target.data);
videosXML = playlist.video;
main();
* The main application.
private function main():void {
volumeTransform = new SoundTransform();
// Create the client object for the NetStream, and set up a callback
// handler for the onMetaData event.
client = new Object();
client.onMetaData = metadataHandler;
nc = new NetConnection();
nc.connect(null);
// Initialize the NetSteam object, add a listener for the netStatus
// event, and set the client for the NetStream.
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
ns.client = client;
// Initialize the Video object, attach the NetStram, and add the Video
// object to the display list.
vid = new Video();
vid.x = 0;
vid.y = 0;
vid.attachNetStream(ns);
videoContainer.addChild(vid);
// Begin playback of the first video.
//playVideo();
//play video code goes here
// Initialize the Timer object and set the delay to
// PLAYHEAD_UPDATE_INTERVAL_MS milliseconds.
t = new Timer(PLAYHEAD_UPDATE_INTERVAL_MS);
t.addEventListener(TimerEvent.TIMER, timerHandler);
// Configure the positionBar ProgressBar instance and set the mode to
// MANUAL. Progress bar values will be explicitly set using the
// setProgress() method.
//positionBar.mode = ProgressBarMode.MANUAL;
// Configure the volumeSlider Slider component instance. The maximum
// value is set to 1 because the volume in the SoundTransform object
// is set to a number between 0 and 1. The snapInterval and tickInterval
// properties are set to 0.1 which allows users to set the volume to
// 0, 0.1 - 0.9, 1.0 which allows users to increment or decrement the
// volume by 10%.
//volumeSlider.value = volumeTransform.volume;
//volumeSlider.minimum = 0;
//volumeSlider.maximum = 1;
//volumeSlider.snapInterval = 0.1;
//volumeSlider.tickInterval = volumeSlider.snapInterval;
// Setting the liveDragging property to true causes the Slider
// instance's change event to be dispatched whenever the slider is
// moved, rather than when the user releases the slider thumb.
//volumeSlider.liveDragging = true;
//volumeSlider.addEventListener(Event.CHANGE, volumeChangeHandler);
// Configure the various Button instances. Each Button instance uses
// the same click handler.
//playButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//pauseButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//stopButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//backButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
//forwardButton.addEventListener(MouseEvent.CLICK, buttonClickHandler);
* Event listener for the volumeSlider instance. Called when the user
* changes the value of the volume slider.
private function volumeChangeHandler():void {
// Set the volumeTransform's volume property to the current value of the
// Slider and set the NetStream object's soundTransform property.
//volumeTransform.volume = volumeSlider.value;
ns.soundTransform = volumeTransform;
* Event listener for the ns object. Called when the net stream's status
* changes.
private function netStatusHandler(event:NetStatusEvent):void {
try {
switch (event.info.code) {
case "NetStream.Play.Start" :
// If the current code is Start, start the timer object.
t.start();
break;
case "NetStream.Play.StreamNotFound" :
case "NetStream.Play.Stop" :
// If the current code is Stop or StreamNotFound, stop
// the timer object and play the next video in the playlist.
t.stop();
playNextVideo();
break;
} catch (error:TypeError) {
// Ignore any errors.
* Event listener for the ns object's client property. This method is called
* when the net stream object receives metadata information for a video.
private function metadataHandler(metadataObj:Object):void {
// Store the metadata information in the meta object.
meta = metadataObj;
// Resize the Video instance on the display list with the video's width
// and height from the metadata object.
vid.width = mainwidth;
vid.height = mainheight;
// Reposition and resize the positionBar progress bar based on the
// current video's dimensions.
//positionBar.move(vid.x, vid.y + vid.height);
//positionBar.width = vid.width;
* Retrieve the current video from the playlist XML object.
private function getVideo():String {
return videosXML[idx].@url;
* Play the currently selected video.
private function playVideo():void {
var url:String = getVideo();
ns.play(url);
* Decrease the current video index and begin playback of the video.
private function playPreviousVideo():void {
if (idx > 0) {
idx--;
playVideo();
// Make sure the positionBar progress bar is visible.
//positionBar.visible = true;
* Increase the current video index and begin playback of the video.
[Bindable]
private var newTime:Number;
private function playNextVideo():void{
if (idx < (videosXML.length() - 1)) {
// If this is not the last video in the playlist increase the
// video index and play the next video.
idx++;
playVideo();
// Make sure the positionBar progress bar is visible.
//positionBar.visible = true;
} else {
// If this is the last video in the playlist increase the video
// index, clear the contents of the Video object and hide the
// positionBar progress bar. The video index is increased so that
// when the video ends, clicking the backButton will play the
// correct video.
idx++;
vid.clear();
init();
//Alert.show("video end")
//positionBar.visible = false;
private function timerHandler(event:TimerEvent):void {
try {
} catch (error:Error) {
]]>
</mx:Script>
<mx:XML id="imagesXML" source="data/images.xml" />
<mx:Zoom id="zoom" />
<mx:Fade id="fadein" duration="1000" alphaFrom="100" alphaTo="0" />
<mx:Fade id="fade" />
<mx:Rotate id="rotate"
angleFrom="-180"
angleTo="0"
easingFunction="Elastic.easeInOut"
duration="2000" />
<mx:VBox id="mainbox" horizontalAlign="left" width="100%" height="100%" verticalScrollPolicy="off" horizontalScrollPolicy="off">
<mx:Panel borderStyle="none"
borderAlpha="0"
cornerRadius= "0"
headerHeight= "0"
backgroundAlpha= "0"
borderThickness="0"
verticalAlign="middle"
top="100"
height="500"
paddingLeft="0"
paddingRight="0"
paddingBottom="0"
verticalScrollPolicy="off"
horizontalScrollPolicy="off"
horizontalAlign="center"
width="{mainwidth-100}"
id="clockpan"
>
<mx:Label text="Current Time : " fontFamily="arial" fontWeight="bold" fontSize="15" id="lab1" color="#FFFFFF"/>
<components:MyWatch formatString="DD/MM/YYYY KK:NN:SS " themeColor="#0D424C" id="clock1"/>
</mx:Panel>
<!--image part start-->
<mx:Panel horizontalAlign="left" id="imagePart" visible="false" includeInLayout="false" borderStyle="none"
borderAlpha="0"
cornerRadius= "0"
headerHeight= "0"
borderThickness="0"
verticalScrollPolicy="off"
paddingLeft="0" paddingBottom="0" paddingRight="0" paddingTop="0"
horizontalScrollPolicy="off"
backgroundAlpha= "0" width="100%" height="100%">
<mx:Image source="assets/images/{images.getItemAt(currentIndex).file}"
showBusyCursor="true" id="imagefile" width="{mainwidth}" maxHeight="{mainheight}" minHeight="{mainheight}" maxWidth="{mainwidth}" minWidth="{mainwidth}" height="{mainheight}" hideEffect="{fadein}" x="0" y="0" maintainAspectRatio="false"/>
<mx:Text text="{images.getItemAt(currentIndex).title}" styleName="title" color="#ffffff" x="0" y="30"/>
</mx:Panel>
<!--image part end-->
<!--image part start-->
<mx:Panel borderStyle="none"
borderAlpha="0"
cornerRadius= "0"
borderThickness="0"
headerHeight= "0" top="0" left="0"
backgroundAlpha= "0" verticalAlign="middle"
verticalScrollPolicy="off"
horizontalScrollPolicy="off"
x="0"
>
<mx:VideoDisplay borderStyle="none" borderThickness="0" visible="false" id="videoContainer"
maintainAspectRatio="false"
/>
</mx:Panel>
<!--image part end-->
<!--<mx:Button label="fullscreen" click="stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;"/>-->
</mx:VBox>
<mx:HTTPService id="service" url="data.xml" result="serviceHandler(event)"/>
</mx:WindowedApplication> -
Java plug-in 1.4.1 proxy configuration issue causes JTextField TAB problems
I have an applet that has multiple JTextFields in it. I recently updated my Java plug-in to version 1.4.1, and now using TAB to navigate among text fields does not always work when I first bring up a browser and load the applet.
I've found, however, that if I open the Java Console and hit "p" (reload proxy configuration), and then reload my applet (hit Refresh/Reload on my browser), the Tab key works as expected. I did not have this issue with releases prior to 1.4.1.
Any clue on how I can ensure proper proxy configuration upon initial instantiation of the browser? I've seen the problem in both IE 6.0 and Netscape 7.0.
Note that the reloading of the proxy configuration only appears to be necessary once per browser session.The navigation isn't working. I click in the first text field to give the initial field focus. I then hit TAB and nothing happens. I have a key listener set up for the ENTER key, and this is also supposed to navigate to the next field via:
((JTextField)evt.getSource()).transferFocus();
To see if there was a problem with my build environment or threads in my application, I came up with the following dummy applet:
import java.awt.BorderLayout;
import javax.swing.BoxLayout;
import javax.swing.JApplet;
import javax.swing.JPanel;
import javax.swing.JTextField;
public class TestApplet extends JApplet {
public void init() {
super.init();
public void start() {
JPanel myPanel = new JPanel();
myPanel.setLayout(new BoxLayout(myPanel, BoxLayout.Y_AXIS));
JTextField textField1 = new JTextField("Text Field 1");
myPanel.add(textField1);
JTextField textField2 = new JTextField("Text Field 2");
myPanel.add(textField2);
JTextField textField3 = new JTextField("Text Field 3");
myPanel.add(textField3);
getContentPane().add(BorderLayout.CENTER, myPanel);
public void stop() {
super.stop();
I then compiled this applet using the following:
javac TestApplet.java
I then put together the following HTML file:
<HTML>
<HEAD>
<TITLE>Test Applet</TITLE>
</HEAD>
<BODY MARGINWIDTH="0" MARGINHEIGHT="0" BGCOLOR="white">
<APPLET
CODE=TestApplet.class
WIDTH=635
HEIGHT=500
ALIGN=left
VSPACE=10
HSPACE=10
>
</APPLET>
</BODY>
</HTML>
The results are the same. I am not able to navigate using the TAB key until I bring up the Java console and then close it again. I would think that if this was a bug in 1.4.1_01, I would have seen it all over the forums. Any help would be greatly appreciated. -
Reverse Proxy Configuration - Apache as an SSL reverse-proxy
Hi,
We have EP 6.0 SP 14 installed with SSL configured.
We are in need to open the application to internet.
For the same we have set up a reverse proxy server (Apache as SSL
Reverse Proxy).
Our requirement is to open the application to the internet with
web address https://abc.domain.com.
The issue is we are able to access the application from internet only when
https://abc.domain.com/irj/potal is typed.
(ie.) Mapping is working fine for
https://abc.domain.com/irj/portal to
our EP Portal address https://abc2.domain.com:50001/irj/portal
And not working for mapping https://abc.domain.com to our EP Portal
address https://abc2.domain.com:50001/irj/portal
We have been working on to resolve this issue for days together but have been really unsuccessful
Kindly help us in resolving the same asap.
Note : The references we used are:
1. SAP's document:
"Apache Reverse Proxy Configuration for J2ee 6.20 and 6.40 Web Applications"
2. Weblogs:
The Reverse Proxy Series -- Part 1: Introduction
The Reverse Proxy Series -- Part 3: Apache as a reverse-proxy
The Reverse Proxy Series -- Part 3.1: Apache as an SSL reverse-proxy
Regards,
venkat.Thanks much for the feedback. We're using the default settings on the HTTP rule we have set up for the portal on the ISA server. We'll be looking into the details of what the default rule settings are, however we did find a note in the Microsoft Knowledge base detailing with the ISA server screening high bits in URL strings for Outlook Web Access (OWA). This generates a similar error message. Here is the link to the detailed note on the Microsoft web site:
http://support.microsoft.com/?scid=kb;en-us;837865
Also,we are going to be applying the SP1 upgrade to the ISA server (released in March) to see if this might be some type of issue that may have been identified and corrected by the service pack. We'll see what happens with that.
One area where we can recreate the problem at will is when we set up the system landscape configuration. We can navigate to a system configuration object, however when we attempt to right click to edit the object we get the error. There are other circumstances where we get errors but that is one that occurs for sure. Anyone have any idea as to what might be special about that type of transaction??
Thanks again.
Rich -
ECC dev to new PI sandbox to be point in ABAP proxy configuration
Hi All ,
We are testing ABAP proxy configuration between ECC Dev and PI new system (sand box) .
FYI : Currently ABAP proxy configuration running fine between ECC DEV and PI DEV system .
Now we have to testing ABAP proxy configuration between ECC Dev and PI new system (sand box) .
Pls advise what needs to be done.
thanksDear All,
Any relation between SLD and Abap proxy configuration ?
FYI:
1,ECC SLD is running fine with PI DEV sysytem (PI7.1).
2,in ECC SAPSLDAPI RFC destination program id is pointing to PI DEV system .
3,In Ecc LCRSAPRFC RFC destination program id is pointing to PI DEV system .
4, PI DEV system is PI7.1
5, PI Sandbox is PI 7.4 SP06 (note : currently we are testing all the interface , PI scenario in new sand box - it is newly upgraded PI system . )
6.In ECC SXMB_adm -> Role of Business System -> Application system
Corresponding Integ. Server -> dest://RFCDESTINATION (H connection type RFC created in ECC SM59.
Below is my question.
1, Latest PI version required H og G type connection ?
2, SLD (sldapicust,lcrsaprfc,sldapicust,rz70)related information needs to point to PI new upgraded dsystem for ABAP proxy testing in new sand box?
pls advise. -
Error update an air application
hi, i have some problem with the update an air application.
when i launch the update function i have this error:
This application cannot be installed because this installer
has been
mis-configured...
i create a simple example, i have 2 version of my
application, v1 and v2. i create 2 folder with the the same
application
the only difference is the number of version.
your can try my example, first install application of v1
folder and after copy and paste the application v2 in the desktop
directory
Example
filesi have this string in log file.
Starting update of c:\program files\appupdate\appupdate.exe
Updating from file:///C:/Users/gsorce/Desktop/AppUpdate.air
Updating to version v2
UI SWF load is complete
UI initialized
Converting to C:\Users\gsorce\AppData\Local\Temp\fla1808.tmp
Conversion is complete
AIR file is bound to version 1.0
app id kiwari
application is bound to this version of the runtime
AIR file app id, pub id, and version don't match
Installed app id: kiwari; AIR file app id: kiwari
Installed pub id: 2B506D926EE0CEC62A432C548B083BEA25EBB872.1;
AIR file pub id: 2B506D926EE0CEC62A432C548B083BEA25EBB872.1
Requested version: v2; AIR file version: 2.0
Re-launching application from c:\program
files\appupdate\appupdate.exe
Starting cleanup
Installation exited -
How to provide terms & conditions option while installing an AIR application
Hi
I have an AIR application which is developed using flex SDK. I have got an requirement that when the user tries to install the AIR application, I need to display the terms & conditions details. If the user accepts the terms & conditions, it need to be install the application. Is it possible to do?
And also i need to set the expiration date (i.e. trial period) so the application gets expired on the specified date in the user's machine. I am not sure whether these two things are possible? Please advice.
ThanksHi Douglas,
Thanks very much (and to Chris) for getting back to me.
I attached a zip file that is a small 'hello world' AIR application that I
compiled using FlashBuilder 4, configured to use the 4.1 sdk. I also
attached the self-signed certificate I used when exporting the release
build. The password for this is dogdish. This application gives the error
messages I indicated in my post when attempting to install on the Mac where
the AIR runtime is not yet installed.
We recently upgraded from FlexBuilder 3 to FlashBuilder 4, which I believe
is when this issue started. I followed the instructions for doing a side-car
installation and had no problems with either Mac or Windows when using
FlexBuilder 3.
Thanks for any help you can provide! -
MII proxy configuration not working
Hello, there!
We have an application that runs as an HTTP proxy. It should intercept messages sent from MII to another system (running on the same machine) via Web Services.
I have configured MII ProxyHost and ProxyPort for MII, but it seems to be ignoring it. Even when I enter an invalid proxy configuration, MII manages to send the messages correctly, when it should raise a Connection Refused type of error.
I have already tried to restart MII application.
Does anybody have an idea on what could be happening?
Thanks in advance!Hi Eduardo,
Check the NetWeaver Logs and post here the error mesages if any.
White spaces are needed between public Id and system Id, check [Here|http://mobiforge.com/testing/story/fixit-valid-markup]
There are many threads are available regarding this topic,please go through them. Some of them I've mentioned below,will help you someway to fix your issues.
Re: Problem on MII Message Service
Re: 407 - Proxy Authentication Required
WebService - No Data Retruned...
Troubleshooting webservice call / xMII-NetWeaver processing / Data Source
Error Invoking Web Service Action: null
-Suresh -
Hi for All, Pleeeeeeease help me, Update Air application problem
Hi guys,
I have big adobe-air ajax based application installed in my computer ,I have updated some files in my application, and generate the new(updated) version of the air file and put it in the server .My application size is 300 MB. The problem is that the update framework will download and reinstall all the files of air application(300 MB !!!) ,
Is there any way to reinstall only the updated files of my application without need to reinstall all the files during the update process ????
RegardsHi Anil,
If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
1. You choose the appropriate InfoProvider.
2. You create one or more aggregation levels.
3. You create one or more filters.
4. You create one or more planning functions.
5. You create a planning sequence.
6. You test the planning model.
which is clearly explained in below link
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
Hope you understood basic thing, as you going on doing u will know clearly every thing.
Ravi -
Hi,
I'm working on Flex/AIR application that makes HTTP requests
and I wonder if Adobe AIR supports proxy server (with user/password
if needed). I coulnd't find it any usable informations in the
documentation regarding this.Thank you for your help.
regards
RomanAIR applications use the system proxy settings.
Oliver Goldman | Adobe AIR Engineering
Maybe you are looking for
-
Classpath settings of java for fedora5.0
Hello All, I've just switched from windows to fedora5.0(linux), and have no knowledge how and from where i've to set classpath for java. Java comes inbuild with this OS, but what version it is?????any help either the full procedure or some helpful li
-
hi all, I would like to know on how/if I can insert a field name into a program source code. For Ex: I have the Vendor name(Field name:NAME1) available as selection option in Table:LFA1 whereas I don't have the NAME1 selection option in Table:BSAK I
-
I imported a photo to iphoto (ver9.6) but the edit mode will not open.
I imported a photo to iPhoto (ver 9.6) but when I click on Edit, nothing happens; I am not able to open the Edit Mode. How do I fix this?
-
is it possible to remove the rootuielements in the views of abap web dynpro.if it is possible means pls tell the solution. Edited by: DHINESH RAJ on May 26, 2008 9:15 AM
-
When I upgraded to Firefox 4.0 my Norton tool bar was no longer compatible and was not added on as before. This tool bar contains among other things my "Identity Safe" which has my passwords to many of my accounts and automatically puts on my usernam