Proxy to file scenario issue

Hi,
I am trying to configure a Proxy to file scenario.
My sender service is ERP system and the my receiver is PI file system.
These are the steps I followed:
1. Created a sender business system for Web AS abap (my ERP system)
2. Created a receiver business system for third party (my PI system)
3. I created all the interface objects(datatype, message type, message interface etc) in Integration repository.
4. In the ERP system , I configured http connection of type h to PI system and also configured lcrsaprfc, sapsldapi connections of type t. I followed this blog: How do you activate ABAP Proxies?
5. I also configured the ERP system as local integration engine, by setting the role to application system in sxmb_adm (followed the above blog).
5. Now I generated proxy in sproxy transaction for the outbound interface.
6. Then I created the communication channel, receiver agreement, interface determination and receiver determination in Integration directory.
7. I created a abap program to call the execute_asynchronous method.
Now the issue is, when I execute my report, nothing happens. I can see the success xml message in sxmb_moni in ERP system. No message is seen on the PI's sxmb_moni. The file is not written either to ERP or PI systems.
Since I am new to PI, I am not sure where to begin with.
If anybody can help that would be great.
Thanks
MLS

Hi
Check the following
1. RFC connection between R/3 and PI
2. You said Business system of type third party (PI) is receiving it. Try Business system standalone Java. If PI system is already defined in Landscape as Integration server. It will not show any message output.
3. message is shown in sxmb_moni in your ERP that measn proxy is able to receive all objects and passed it from there.
4. Check in SMQ2 outbound queue of ERP as well as inbound queue for PI if message exist.
5. While configuring in ID you dont need a sender agreement. Did you created one.
Thanks
Gaurav

Similar Messages

Issue in Proxy to file scenario

Hi Folks,
I'm Currently configuring a Proxy to File scenario in the SAP PI 7.0. when I'm trying to test the proxy class I can find in the SXMB_MONI that the sender service, sender interface & the sender namespace is there but the same for the receiver side is blank. When I'm trying to trigger the proxy program I find the same issue. rather I find that there are 2 items present in the monitor one where the sender details is filled but receiver details is blank & the other is sender details is blank but the receiver details id now filled with the sender data i.e. in the receiver interface field the sender interfaceface is being displayed. I checked my receiver determination it's absolutely correct. Kindly help.
Regards,
Santosh

Hi,
Thanks for your reply, but i think we cannot paste a screenshot in SDN. Atleast I don't know how to do it here.... Can you pls let me know how to do it..
Regards,
Santosh

Error in Proxy to File scenario

Hello All,
I m doing Client Proxy, ABAP proxy to file scenario.
I hv done all the configurations in IR & ID.
I hv also created proxy in sender R3 system.
But messages are not going successfully from R3.
when i checkin SXMB_MONI of R3 i get following error
<SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
Message is in SYSFAIL status in SMQ2.
Any clues how it can be solved??
Thanks in adv.
Mahi

Hi Maheshwari,
Please try as mentioned below
Option 1: Go to SXMB_ADM->Manage Queues and Deregister all the Queues.Use transaction SMQR or SMQ2 to reset the status of queues
For this to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
Option 2: Check the user associated with the RFC destination AI_RUNTIME_JCOSERVER in sm59 transaction. It is generally SAPJSF. Might be posisble the user password is expired or locked. Log on to j2ee admin tool on the server side and update the password and then see if it works.
Thanks
Amit
Reward points if answer is helpful

Error on PROXY to FILE scenario

Hi,
I'm working on a Proxy to FIle Scenario. 1 Proxy is triggered and 7 files should be generated at the target side.
Now when the proxy is triggered all the 7 files doesn't get generated. Instead randomly some 3-4 files are getting generated.
Could not see the rest of the entries in MONI also.
Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
Thanks,
Vikas

Vikas,
Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
> how 7 files will generate ?
From Proxy level @ ECC it don't seems logical/possible as whole data will be passed as a whole to proxy interface and on some condition basis only you would be creating 7...files . so definitely at SXMB_MONI of XI you can see this .
Try to increase trace_level parameter to 3 (only in development box , as it will consume the server very fast) for better monitoring .
Since the no. of files will be created by file adapter only so those many no. of receiver file adapter calls you can see at RWB.
Regards,

Proxy to file scenario

Hi SDN,
I have a query regarding a Proxy to File scenario. Whenever the ABAP proxy populates the structure an d sends the data accross to XI to genarate a file structure, then how does it confirms that the structure is sent to SAP.XI or to somewhere else? How is the confirmation done? and where is it done at Sender side or at the XI side?
Thanks,
Aniruddha

Hi,
>>>How is the confirmation done?
if you do not set ack request it does not do any confirmation - you only see the successful flag in ECC and in PI
nothing more
Regards,
Michal Krawczyk

Proxy to File scenario - IDOC as an flat file

Hi,
I am working on ABAP Sender Proxy to File scenario. The target structure in the message mapping is SHPMNT05 IDOC and the output of the file needs to be in the text format and then the file will be send to an EDI subsystem.
Currently, EDI subsystem gets the IDOC from ERP system as a flat file and expects the similar kind of file from XI system
The requirement is to have all the fields of the IDOC in the target file. If data does not exist for a particular field, then there should be a space for that field in the text file.
I would like to know if there is any other standard way of executing this scenario apart from using File Content conversion. In case if we have to use FCC, how difficult it would to be implementing the scenario. Please note that the output file needs all the fields of IDOC in it.
Regards,
Sakthi
Edited by: Sakthi on Sep 26, 2008 11:24 AM

Hello Sakthi,
By coding in proxy populate the idoc structure if it is difficult to handle thru Content conversion parameters then create an intermediate structure and populate that structure by concatenating the fields from idoc segments. If the fields are not having the values then add blank spaces as per length of the field.
You can configure the file channel and content converison parameters for the intermediate structure.
Hope it will helps to you.
Cheers
Veera

ABAP client proxy to File scenario

Hi,
I am doing ABAP client proxy to File scenario.
I have followed Ravikumar allampallam blog i.e https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1387. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
My abap proxy has successfully created 4 objects:
1)ABAP Class ( ZCO_ MIOA_ABAP_PROXY).
2. Structure for the message type in ABAP Data Dictionary (ZMT_PROXY).
3. Structure for the data type in ABAP Data Dictionary (ZDT_PROXY_SRC).
4) Table type (ZSTRING_TAB).
can u tell me how can i fetch data from database table into structure?

Hi,
see first create the data type,msg type, msg interface and go to R3 instance of Xi and use SPROXY transaction , locate your SWCV,namespace, intreface ( outbound) and create the proxy , later give the name starts with z, later in ABAP program create the internal table of type of the Structure for the message type in ABAP Data Dictionary (ZBLOGEMP_PROFILE_MSG )
so follow the code and explained about each ob, structure of Msg ..
Regards
Chilla

Outbound Proxy - XI - File scenario. Outbnd proxy not callin XI.

Hi All,
I have a requirement where I have to develop a Outbound Asynch Proxy-> XI -> File scenario.
For this I have crated an Outbound Asynch proxy and called this proxy from a report in ABAP.
When I execute the report, i am unable to see the message in XI Moni.
But when I try to emulate the same scenario by passing a message from the RWB Test Page, the message is flowing to the file successfully.
It seems that the problem is just that the ABAP report is unable to call the XI by executing the outbound proxy method.
The code for the report is as below:
*& Report Z_ASYNCH_PROXY
REPORT Z_ASYNCH_PROXY.
data prxy type ref to ZFUJCO_SI_TEL_NUM_RFC_RESP_ASY.
data out type ZFUJMT_TEL_NUM.
out-MT_TEL_NUM-TEL_NUM = 'test_proxy'.
create object prxy .
TRY.
CALL METHOD prxy->si_tel_num_asych_in
EXPORTING
    output = out
commit work.
CATCH cx_ai_system_fault .
   DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
ENDTRY.
Please tel me how to find out that where the message is getting stuck and resove this.
regards,
Piyush

Hi All,
Thanks a lot for ur inputs.
i was able to resolve it.
The pointers are:
- The message was gettting stuck in the queues XBTS0009 of the Bus system. I chekced it in SXMB_MONI of bus syst.
- i activated the queues usung SXMB_ADM -> manage queues
- The HTTP destinatin was not maintained for the connectino to the PI Url. In fact the url was hardcoded in the sicf -> xi-> engine
I maintained this using
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1803326050DB10288658103888810737End?blog=/pub/wlg/3022
Thanks for all your help.
regards,
Piyush

Proxy to file scenario - strange error

Hi,
we r finding a strange error occurring in our prd system. we have many scenarios of proxy to file and they all are running fine. the problem which is arising from the last few days is that - for some outbound interfaces at random, the message is generated in ECC, sent to XI and its file generated in local system of XI - this is fine - but what is happening as strange is the message is again getting processed in SMQ2 queue of ECC - this is the duplicate msg of the original msg - we can say this is duplicate msg becoz the msg id of the original msg in ECC, is available in XI with the same msg id and this erroring msg in SMQ2 is having the same msg id again - suggesting that somehow ECC is trying to process the same msg again.
has anyone seen this type of error before. pls suggest how to rectify this error.

hi,
no upgrade happened recently.
in ECC in SMQ2 queue the msg is erroring with error XI server CLIENT_RECEIVE_FAILED. INTERNAL Queue stopped. In SXMB_MONI in ECC the msg is erroring with :
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
Error while receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)
the scenario is async outbound proxy to file scenario. it is happening randomly for any interface and only a few times eg 1 msg out of 300 msg in a day is having this duplicate msg error.
Please suggest.

Proxy To file scenario : need the output in hierarchial structure

Hi all,
I am doing a proxy to file scenario. Now I am getting the output as :
<documents>
<document>
<header>
<delivery_number></delivery_number>
<tax_number/>
u2026
</header>
<data>
u2026
</data>
</document>
<document>
<header>
u2026
</header>
<data>
   u2026
</data>
</document>
u2026
</documents>
But I would like to change the output to below structure.
<documents>
           <document>
     <header>
                             <delivery_number></delivery_number>
                             <tax_number/>
                              u2026
                     </header>
     <data>
                                 u2026
                      </data>
           </document>
           <document>
     <header>
                             u2026
                      </header>
     <data>
                            u2026
                     </data>
             </document>
u2026
</documents>
Can anyone suggest me how can I get this?
Thanks,
Arivarasu S
Edited by: Arivarasu S on Jan 31, 2011 2:54 PM
Edited by: Arivarasu S on Jan 31, 2011 3:00 PM

<documents>
      <document>
            <header>
                       <delivery_number></delivery_number>
                        <tax_number/>
                                  u2026
             </header>
             <data>
                        u2026
              </data>
       </document>
</documents>
I need the output as mentioned above.. pls let me know how can i achieve this..
Thanks,
Arivarasu S
Edited by: Arivarasu S on Jan 31, 2011 6:59 PM

Proxy to File Scenario Steps

Hello everybody-
I am trying a proxy to File scenario, Its from SRM-XI-File , i have followed the blog
Learning XI
but the question i have is, if iam sending a invoice from SRM to XI , what are the configuration steps that i need to do in SRM and in XI, i mean how do i configure proxy in SRM?(in that matter any source system), Can someone tell me the configuration steps that need to be done in SRM and XI to use proxies.

Venkat
Instead of using proxies for sending invoice from SRM use IDOC's. There are idocs aviable to do this activity. But if u are going to recive a response then u might think of proixes as idocs supports only asyn interface. for large data voumens make use of proxies.
Go through SRm master guide that gives you details of Standard Interface available.
service.sap.com/installation
and then goto SRM - Master Guide
also
SRM, like many other mySAP Business Suite applications, provides standard XI Content. You can download that content from here:
http://service.sap.com/swdc then
Support Packages and Patches->SAP Application Components->SAP SRM (WITH SAP EBP)
Then you go to the specific content version, depending on what SRM release you're on. also u can check with:
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
NOTE: There are some preconfigured mappings available for SRM in www.service.sap.com. Check out this thread
Is there pre-configured message mapping for SRM Content?

Proxy-to-File scenario (Turkish Characters Encoding)

Hi All,
I have a Proxy to File scenario. (No Message Mapping...As the data is processed and sent as it is)
The input data to PI contains Turkish characters, and the File getting generated at FTP location is converting some of those characters into special characters while I am using the encoding as "cp1252" in the Processing tab under "File Encoding" option of the Receiver File channel.
e.g. :
1)
i/p - MİA L poşet
o/p - M?A L po?et
2)
i/p - İstanbul-Ankara gidiş dönüş uçak bileti
o/p - ?stanbul-Ankara gidi? dönü? uçak bileti
As in the above examples, at the o/p side it is converting some charactres into "?"
Could you please suggest the correct encoding used/steps to be followed in this case.
Thanking you in advance.
Thanks and regards,
Neetish

Hi Amit,
I tried with cp1524.
Now it is giving me
1)
i/p - MİA L poşet
o/p - MÝA L poþet
2)
i/p - İstanbul-Ankara gidiş dönüş uçak bileti
o/p - Ýstanbul-Ankara gidiþ dönüþ uçak bileti
The "?" is now replaced with "Ý"
Please suggest.
Thanks.
- Neetish

Proxy-to-File scenario. Acknologements.

Hello Experts,
We have a Proxy-to-File scenario, is it possible to receive on SAP-backend side acknolegement that the file was succesfully delivered to target FTP server.
What are the options for this requirement? The only solution I can see right now is a BPM, where there is a transport acknowlegement selected on Send step. But are there are any other?
Best Regards

>
Artsiom Anichenka wrote:
> Hello Shabarish,
>
> Thanks a lot for your response!
>
> Maybe you know how this standart acknolegemnt mechanism works? What makes Adapter to send acknowlegemnt back to BPM? Maybe BPM sets some flag on message header?
>
> I am thinking about somehow to simulate this without the BPM.
I am not sure about the underlying activity. But the step steps forces a request for acknowledgment in this case. I will wait to see if anybody can explain this. Will be a good info to know.
Anyway,
In case you got for a customized way, you may lose out on performance, hence since there is a standard functionality available, do opt for the same.

Proxy to file scenario ( pls gve me some inputs )

I am Doing proxy to file scenario. i have some quries i want some suggestions regarding this scenario.
Source is proxy and Target is File . i want to generate 6 files with same structure and different different filenames . I guess have to put condition in interface determination? is it correct? if it is correct what condition i have to put plz give me suggestions .
filenames also generate different different names how it could be done in dynamic configuration? plz give me some inputs regarding this.
Thanks
Regards
Tahir

Hi,
>>i want to generate 6 files with same structure and different different filenames
How the filename is decided? If it is decided in runtime then you can go for single receiver channel and variable substitution.
You need to make file name in the message mapping itself and assign it to a field of the target (or in any of the available message headers)
If the filename is always constant (say then have names A, B, C etc with timestamp) . Then there should be a field in source structure which decide what file to be created right? here you can use receiver/interface determination with condition
Regards
Suraj

Do we need a Inbound Inteface in a Proxy to File scenario

Hi,
In Proxy To File Scenario, please let me know whether we have to create inbound Message Interface or not ?
1) If it not required to create inbound Message Interface in Proxy To File Scenario, then what is the procedure to pick the Inbound Interface in Interface Determination?
Thanks in advance
Abhishek

Have a look at this
Proxy to File
Dimitris

Proxy to file scenario issue

Similar Messages

Maybe you are looking for