PS CC 2014 not showing up in Mac Finder after update

Just did the update/install of PS CC 2014, and while I can see the application in my applications folder if I do a spotlight search, it does not show up in Mac Finder when I go to my applications folder. Actually this is the case for several CC 2014 apps after the update. For example, Muse CC 2014 and InDesign CC 2014 show up in my applications folder, but not Illustrator CC 2014 or PS CC 2014. Anybody else experience this and/or have a resolution? I did a restart after the cc 2014 app updates to see if that would fix anything, but it didn't.
It's annoying to have to do a spotlight search to reinstall all my plug-ins and to just launch the app.

Craig, thanks for the reply, but it's not a matter of updating the dock icons after the update. I realize I need to drag the new CC 2014 apps to the dock if I want to access them there. It's more of an issue where all the CC 2014 app updates except Muse and InDesign weren't showing up in my HD > Applications folder where every other app on my machine resides. Instead, most of the CC 2014 updates got installed to my User > Applications folder for some bizarre reason. Those updates are the ONLY apps in that folder.
Anyone know why they would get installed there instead of the normal HD > Applications folder?

Similar Messages

  • HT4623 my phone does not show up in my computer after update

    my phone does not show up in my computer after update

    Hey there, i got the same Problem with my MacBook Pro (Mavericks 10.9.4) and two iPhone´s 5 with the iPad 2 and the iPad Air, (all with iOS 7.1.2) since 2months. SOLUTION???
    Since the change of Snow Leopard on Mavericks, the entire system of the MacBook is much slower. This is already noticeable at the beginning (start the MacBook Pro). It runs through the entire software. z.Bsp. Open Safari / Outlook, iTunes and more. for about 2months absolutely no back-up of my devices is possible!!
    Every time when you connect the hardware (iPhone 5 / iPad 2 / iPad Air) iTunes stops responding and needs to close above EXIT NOW!! No back-up's my hardware (see above) possible!!!
    but iPhoto is running with the devices and at least I can transfer the images.

  • IPhone 5s will not show in Itunes 11.3 after update

    Hi Folks,
    Updated iTunes to 11.3.0.54 and restarted my machine (running win 8.1).  Now when I dock the IPhone (5s running 7.1.2) it shows the 'Trust' prompt and when accepted, sounds a tone, then does nothing.  ITunes does not show any phone connected - no errors are listed in the Windows Event log.
    Done all the usual things, restarted both devices, unplugged etc. but still the same issue.
    Anyone have a fix for this?

    Thanks TwoSeven- I had exactly the same problem with my 5S and your solutions has fixed it.  It is however appalling that we should have to suffer these problems and waste so much time and effort trying t resolve them after a relatively minor update of iTunes.
    Apple - get your act together and thoroughly test your software before you unleash it on the innocent!

  • IE is not showing on windows server 2008 after updates

    Hi,
    I have installed Window server 2008 R2.
    After installing i found IE 8 on the server, but after 1day it automatically updated some softwares and now IE is not showing on my system.
    i.e IE uninstalled after the updates to the windows server.
    Please can some one help me to get the IE. I tried installing IE8, IE9 after downloading but it is showing "Internet Explorer 8 is not supported on this operating system"
    Regards
    Krishna

    Hi,
    Internet Explorer 8 runs on any of the following operating systems: 
    Windows Vista, 32-bit versions      
    Windows Vista, 64-bit versions      
    Windows Vista with Service Pack 1 (SP 1) or a later version      
    Windows XP, 32-bit versions with Service Pack 2 (SP2) or a later version      
    Windows XP Professional, 64-bit Edition      
    Windows Server 2003, 32-bit versions with Service Pack 2 (SP2) or a later version      
    Windows Server 2003, 64-bit versions with Service Pack 2 (SP2) or a later version      
    Windows Server 2008, 32-bit, or a later version      
    Windows Server 2008, 64-bit, or a later version 
    Please expand the below path to check whether IE is there:
    C:\Program Files\Internet Explorer
    Regards,
    Yan Li
    Regards, Yan Li

  • My phone number not showing in myi phone 4 after updating it to 6.1

    After update my i phone 4 to IOS 6.1 , my phonenumber not showing up under the phone app and i couldnot get I massege and face time to varify . and it took 2 days till nowand still said waiting for activation .
    when you open the phone app it said   my phone unknown
    can you please tellmewhat to do v?
    Thanks for your support
    said

    Looka like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
    Be sure to make an appointment first...

  • PREMIERE PRO CC 2014 chapters not showing up in ENCORE now after update

    Upgraded from 2014 to latest revision version.
    Straight export from Premiere Pro CC 2014 to Media Encoder CC 2014.
    Queue up to Media Encoder.
    H.264 for Blu-ray.
    When I import to Encore for timeline, no chapters are showing up now.
    Always did before.

    I'm using the following programs on Mac OS X Version 10.9.5:
    Encore version 6.0.0.492
    Premiere CC 2014 version 7.2.2
    Media Encoder CC version 7.2.2.29
    I'm having the same exact issue described above, but the xml in my .xmpses file does not match what you've listed above.  The end of my .xmpses file reads as follows:
    </stMkr:MarkerInfo>
            <stMkr:NMarkers>38</stMkr:NMarkers>
            <stCap:CaptureTimecode>
                <rdf:Seq>
                  <rdf:li rdf:parseType="Resource">
                      <rdf:value rdf:resource="Capture"/>
                      <stCap:index>0</stCap:index>
                      <stCap:capturetime>00:00:00:00</stCap:capturetime>
                      <stCap:time>00:00:00:00</stCap:time>
                  </rdf:li>
                </rdf:Seq>
            </stCap:CaptureTimecode>
            <stCap:NCapture>1</stCap:NCapture>
          </rdf:Description>
      </rdf:RDF>
    </x:xmpmeta>
    </UserData></SessionFile>
    And I can't find the "Duration>0</StreamDuration>" anywhere in my .xmpses file.  Yet, I'm still getting the "Error parsing MPEG metadata file. Deleting or renaming "E:\YourVid\test.m4v.xmpses" will allow you to import, but any markers will be lost." message when trying to import as a timeline in Encore.  Is there a new workaround that you know of?  Thanks for any help you can give!

  • BOOTCAMP partition not showing up on Mac OSX after resize

      Hello, I have a iMac 27" late 2013 with OSX 10.9.5 and recently I resized my bootcamp partition and reformatted the OSX partition for a clean install. After the formatting, I cannot see or access the Bootcamp partition anymore. I really don't want to have Windows anymore, but I messed up thinking I would be able to recover my files. I tried following these answers but none of them worked for me. Now I can try to boot into Windows, but it gets into a disk error.
    - I tried this solution without any success: http://nerdr.com/bootcamp-partition-lost-repairing-mac-partitions/
    - I tried LonerT's solution on this post but it was hard to apply to my case: https://discussions.apple.com/thread/6574886
    diskutil list /dev/disk0
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            550.3 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                249.0 GB   disk0s4
    Could anyone give me some hints? I tried following other solutions but I don't really grasp how partitioning works on the OS X.
    Thanks anyhow

    sudo fdisk /dev/disk0
    Password:
    Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE    0   0   2 - 1023 254  63 [         1 - 1467197439] <Unknown ID>
    *2: 07 1023 254  63 - 1023 254  63 [1467197440 -  486326272] HPFS/QNX/AUX
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused    
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
    sudo gpt -r -vv show disk0
    gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
    gpt show: disk0: Suspicious MBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: disk0: Sec GPT at sector 1953525167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6       
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1074902336      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      1075311976     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1076581512   390615928       
      1467197440   486326272      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1953523712        1423       
      1953525135          32         Sec GPT table
      1953525167           1         Sec GPT header
    Apparently the Bootcamp partition isn't starting where it should be, since I resized it.
    EDIT (forgot TestDisk):
    TestDisk 7.0, Data Recovery Utility, April 2015
    Christophe GRENIER <[email protected]>
    http://www.cgsecurity.org
    Disk /dev/disk0 - 1000 GB / 931 GiB - 1953525168 sectors (RO)
    Current partition structure:
         Partition                  Start        End    Size in sectors
    1 P EFI System                    40     409639     409600 [EFI System Partitio
    2 P Mac HFS                   409640 1075311975 1074902336 [Macintosh HD]
    3 P Mac Boot              1075311976 1076581511    1269536 [Recovery HD]
    Warning: number of heads/cylinder mismatches 255 (NTFS) != 1 (HD)
    Warning: number of sectors per track mismatches 63 (NTFS) != 1 (HD)
    4 P MS Data               1467197440 1953523711  486326272 [BOOTCAMP]

  • Why is my WD My Book for Mac not showing up on the finder after installing Mavericks?

    I recently upgraded to Mavericks. I have a WD My Book. I had received emails from WD stating that the software from WD had to be removed from the Mac before installing Mavericks. So I waited until I received an email from WD saying they had resolved the issue. I upgraded to Mavericks and used the new Drive Manager and SmartWare software from WD. The software (WD) recognizes my iMac, but the WD My Book does not appear through their software or in the Finder on my iMac.
    I've called WD twice and it seems they have no idea what to do. They replied with an email for software to recover my files. But I can't even see the files on the My Book drive to recover them. Is this a Mavericks issue? Do I need to download something from Apple? I don't think the issue is to recover files. It's just that the iMac is not recognizing the drive at all.
    Help!
    Thanks,
    Jose.

    WD new software and firmware is having serious issues.
    http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
    DO NOT use HD software 
    nobody should do that.

  • LP X not showing up in Mac AppStore for Update?

    Hi All
    I bought Logic Pro X a while back and have recently rebuilt my Macbook with Mavericks (clean install); I reinstalled it through copying the .app file from a backup.
    It then went online and downloaded all of the additional content as expected from Apple. About dialog box shows version 10.0.0 is installed. It works fine.
    I've tried to update it to 10.0.4 but when I go into the AppStore, its not listed in the Updates list and then if I click Logic in the top 10 paid downloads, its not listed as purchased?!
    I'm using the same AppleID I had before. I didn't try to update the previous install so not sure if it ever worked.
    Does anyone know if there is a different way to download the 10.0.4 update (maybe as a DMG or .app file?)
    Thanks Simmo

    Ok found the solutions to reinstalling Logic X from the App Store….
    1. First trash the App from your applications folder- command C + Command V paste to your desktop, then put it in the trash. You can't drag it to anywhere you get an Alias?
    2. Make sure you unmount any external HD in my case had Logic X projects on? 
    3. Then empty the trash.
    4. Go to the App Store and sign Out! Then close the app…
    5. Restart the computer in Safe Mode hold the shift key down? 
    6. Once your desktop is up power down again restarting the computer normally - your emptying the cache files etc. or so I am told.
    7. Once up and back to your normal desktop open the Apps Store - sign in and go to your purchases.  You may have to sign out then sign in again?
    With some Apple magic your Logic Pro X app should appear for INSTALL.  
    You will have to set everything up in Logic X again but hopefully you have a BK of your Key Commands?  Just import?
    It all appears a pain just to install Logic X again but it works.  Many of you may not need to go through the various things to get the App Store to work.  I did this with an Apple Logic X tech?  There well maybe other ways of skipping powering up and down etc.  At least you can reinstall and hopefully get rid of any previous bugs and problems?   Cheers Don H

  • Clients not showing apps in software center after update to CU4

    I recently upgraded my SCCM2012 SP1 to CU4 in an effort to support our Macs some of which are running Mavericks. However, I have been noticing that many times when I do an OSD of a Windows computer one of a couple things will happen. If it is a computer
    that is being re-imaged, it will only get a single app installed and no other apps will show up in Software Center. I also just today got a new computer and most of our apps are in SC but several are missing. They show up in the console as being deployed to
    the machine in it's properties under Devices, but they just aren't getting to the computer. On the re-image computer many times I could just remove it entirely from SCCM then re-add it and it would work fine but with the new computer I'm at a loss as to what
    to do. Has anyone else seen this behavior?

    Is the device stuck in provisioning mode?  That would block it from getting client policy (among other things).
    To check, see ProvisioningMode = True under the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCM\CcmExec registry key.
    This usually happens if an unsupported update gets installed while in the task sequence:
    http://support.microsoft.com/kb/2894518/en-us
    You can fix a broken client with this PowerShell command:
    Invoke-WmiMethod -Namespace root\CCM -Class SMS_Client -Name SetClientProvisioningMode -ArgumentList $false
    To keep them from breaking, use offline servicing to inject the updates into all of your images so they don't get installed during the task sequence.
    I hope that helps,
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • Can not open download folder in Finder after update to OS X Lion

    Hi there. I have recently upgraded to OS X Lion. The upgrade was smooth. But since the upgrade I am unable to open Download folder in Finder. If I select Download in Finder's sidebar nothing happens. Finder won't display content of Download folder. If I go and select Home folder in sidebar, Finder displays content of my Home folder including Download. If I double click Download folder to access it nothing happens again. Cant access it. But if expand download folder using triangle next to it, Finder will expand me Download folder and show it's content...
    I tried to verify and repair my permissions with Disk Utility, but did not solve my issuel. It is very frustrating scenario, since Download folder is something I access every day multiple times.
    Any ides what can I do?

    I found a solution that worked for me. Seems like my firewall did not accept the afp connection permissions anymore after installing lion... Since everything worked well turning off the firewall.
    So if you don't want to keep your firewall disactivated here is what worked for me:
    - Leave your firewall activated.
    - Turn OFF afp file sharing in the sistem prefs
    - Restart your Machine
    - Turn ON afp file sharing
    - You should now get a message if you want to accept afp connections...
    - click YES
    Seems like this resets somehow the afp permissions in the firewall settings
    Everything fine on my network now.

  • External Drive Files Not Showing Up on Mac but files do shows Up on PC

    External Drive Files Not Showing Up on Mac but files do shows Up on PC
    i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

    yes. i did.
    ...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

  • Why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed.

    why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed so this ***** a bit. Also how do I keep this incedent from happending in the future?

    No, this is not the case. I know where i purchased the movie and I also know movies cant be added to the cloud such as music, TV shows can.  The instance happened during the dowload. I think that depending which computer is up and running and the bandwith allocated on either network, which ever computer that finishes first is the one that gets the movie. Just a thought. So next time I will ensure my IMAC is not running. I think that fixes it.
    Thanks

  • I have a disk inserted into my MAC that is not showing up in the Finder side bar. How do I eject it?

    I have a disk inserted into my MacBook Pro that is not showing up in the Finder side bar. How can I get it "ejected?" (I've checked in system preferences under CDs & DVDs and did not find a solution.)

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • How to hide or do not show the receipt's name after miss called?

    1. How to hide or do not show the receipt's name after miss called?
    2. I do not want to show my message statement in the screen.

    I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
    The strange thing is that the Embedded Web Server says:
    "This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
    But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
    Please help with solving this issues?

Maybe you are looking for

  • How can I sync my old ipod touch apps to my new ipod touch

    I have an ipod touch 3G and just got an ipod touch 4g, I want to get the apps with their history (such as my calendar and golf scores) on to my new one. But apparently I made a mistake when I registered my new touch.  Is there any way I can sync my o

  • Team Calendar problem in ESS

    hi, I've done the customization for team calendar is spro settings. When the Manager logs in on ESS, he is not able to see the employees reporting to him. What settings I'm missing? I've used one rule group & in that I've assigned team view mode to v

  • Flash player not installing in explorer

    My flash player will not install. I have vista. please help, getting fed up now ;-(. what info do u need? Went to download flash player from http://get.adobe.com/flashplayer/. I click install and click the gold bar at top click install, the page move

  • HT3819 The article says you can "simply drag music between computer libraries."

    Is there an easy way to transfer music between computer libraries?  I am using home sharing and can stream music between one computer to another with no problem.  However, when I try to transfer files from one library to another, I can not transfer a

  • How to extend VLAN in 3rd and 4th 6513 switch with HSRP

    Hi presently in One Data centre 02 Nos. of 6513 is configured in HSRP. Due to space constraint some servers need to be installed in other room and there 02 Nos of 6509 switches need to be configured in HSRP again.  One Data Vlan needs to be extended


HashFlare