(PS CC - QUESTION) How to do this effect?

How to do this effect? i'm using photoshop CC 2014
Thank you !!!

The easiest way is probably to use Image -> Adjustments -> Hue/Saturation and check the "Colorize" checkbox, then select the Hue and Saturation of the color you want.

Similar Messages

How to make this effect in Keylight?

Hi, I have question, how to make this effect in Keylight?
I know that this overlay is added here:
http://oi57.tinypic.com/1174fup.jpg
Photos:
http://iv.pl/images/18475588964010299091.jpg

Keylight what? All I see is some effect similar to Leave Color, a.k.a the Pleasantville effect that made the rounds 10 years ago. It may require additional masking and otehr effects, but definitely not something that is specifically related to Keylight...
Mylenium

How to achieve this Effect?

Hey everyone i was wondering if you guys had any idea how to achieve this effect in flash.....http://www.youtube.com/watch?v=QftcJtvLr8g

While you could probably do this in Flash, it is much more simply done using AfterEffects. There's a splendid text tool that can be tortured into effects like this. Have a look at the podcasts from Creative Cow on AfterEffects for some interesting examples.

Can anyone tell me how to do this effect

can anyone tell me how to do this effect at the 1:38 mark thanks in advance http://www.youtube.com/watch?v=1Z_ZFHLVEsA&list=UUb934vQ6fg1JZQKvkCQ_j-Q&index=1&feature=p lcp

you can use an effect call s_RandomEdits from the Sapphire plug ins. it randomly jumps between different points of the scene.

Can anyone explain how to create this effect in Deamweaver and Fireworks?

This site was oriinally done in dreamweaver - but the shadow
effect was done
outside of Dreamweaver. When I save to html and load into
Dreamweaver it
makes no sense to me.
Can anyone explain how to create this effect in Deamweaver
and Fireworks?
http://www.fundflowsystems.com/test.php
Thanks in advance,
Joe

Thank you so much...
You is da bomb!
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes - a blank (completely blank) page.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:[email protected]...
>> Murray, one more favor if you would be so kind...
>> Do you recall how this page degraded in Safari?
>>
>>
http://www.binney.us/table-allcode.htm
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Nope. Sorry. You need a Mac.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Ken Binney"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Thanks Murray...
>>>>
>>>> Is there a way I can test for Safari on my
PC XP ?
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fails in Safari, Ken.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Ken Binney"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Here is a solution requiring NO
images.
>>>>>> The CSS and the Javascript can
easily made remote the page
>>>>>>
>>>>>> <!DOCTYPE HTML PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN"
>>>>>> "
http://www.w3.org/TR/html4/loose.dtd">
>>>>>> <html>
>>>>>> <head>
>>>>>> <title>Shadow</title>
>>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>>> charset=iso-8859-1">
>>>>>> <script
type="text/javascript">
>>>>>> var depth = 6 // in pixels
>>>>>>
>>>>>> // addLoadEvent t
>>>>>> function addLoadEvent(func) {
>>>>>> var oldonload = window.onload;
>>>>>> if (typeof window.onload !=
'function') {
>>>>>> window.onload = func;
>>>>>> } else {
>>>>>> window.onload = function() {
>>>>>> if (oldonload) {
>>>>>> oldonload();
>>>>>> }
>>>>>> func();
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> addLoadEvent(function() {
>>>>>>
>>>>>> var a = document.all ? document.all
>>>>>> document.getElementsByTagName('*');
>>>>>> for (var i = 0;i < a.length;i++)
>>>>>> if (a
.className == "shadow") {
>>>>>> for (x = 0;x < depth;x++) {
>>>>>> var newSd =
document.createElement("DIV")
>>>>>> newSd.className = "shadow2"
>>>>>> newSd.style.background = a.id
>>>>>> newSd.style.width = a
.offsetWidth + "px"
>>>>>> newSd.style.height =
a.offsetHeight + "px"
>>>>>> newSd.style.left = a
.offsetLeft + x + "px"
>>>>>> newSd.style.top = a.offsetTop +
x + "px"
>>>>>> document.body.appendChild(newSd)
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> );
>>>>>>
>>>>>> </script>
>>>>>> <style>
>>>>>> .shadow {
>>>>>> border: 1px solid silver;
>>>>>> padding: 2px;
>>>>>> font: 10pt arial;
>>>>>> position: relative;
>>>>>> display: inline;
>>>>>> background: white;
>>>>>> z-index: 100
>>>>>> }
>>>>>> .shadow2 {
>>>>>> overflow: hidden;
>>>>>> position: absolute;
>>>>>> filter: alpha(Opacity=15); /* modify
to change the shade
>>>>>> solidity/opacity, same as below */
>>>>>> opacity: 0.1; /* firefox 1.5 opacity
>>>>>> -moz-opacity: 0.2; /* mozilla
opacity */
>>>>>> -khtml-opacity: 0.1; /* opacity */
>>>>>> z-index: 10
>>>>>> }
>>>>>> </style>
>>>>>>
>>>>>> </head>
>>>>>>
>>>>>> <body>
>>>>>> <table width="800" border="0"
align="center" cellpadding="0"
>>>>>> cellspacing="0" class="shadow"
id="#000000">
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> </table>
>>>>>> </body>
>>>>>> </html>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Joe"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>
>>>>>>> This site was oriinally done in
dreamweaver - but the shadow effect
>>>>>>> was done outside of Dreamweaver.
When I save to html and load into
>>>>>>> Dreamweaver it makes no sense to
me.
>>>>>>>
>>>>>>> Can anyone explain how to create
this effect in Deamweaver and
>>>>>>> Fireworks?
>>>>>>>
>>>>>>>
http://www.fundflowsystems.com/test.php
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

How to imitate this effect on a video?

How to imitate this effect on a video? Frozen Frames etc.
http://img.fotocommunity.com/images/Spezial/Fotokunst/Bildstoerung-4-a23797032.jpg
Need to how to imitate this effect.

Search the web for "digital glitch" or "digital noise". A simple technique woul be using the Time Displacment effect with a pattern created by the Mosaic effect....
Mylenium

How to make this effect ? ( video )

Hi all
how to make the screen blink dark like in this video http://www.youtube.com/watch?v=TszuTgFx93U
starts at 0.46 end at 0.50
can anyone tell me hows it called ?

If you mean this effect and then changing to a black screen then this is a glow with an add blend mode and a blur followed by a black layer multiplied with opacity keyframes.
I would put the video on the bottom layer, then add an adjustment layer and set the in and out point of the adjustment layer to the length you want to have this effect. It's only a few frames in the sample video. Then I'd go to the middle of the adjustment layer and add Glow to see if you could get close to this effect. Then I'd animate the opacity of the adjustment layer from zero to 100 over a few frames. I'd then set a new black solid above that and set the blend mode to Multiply. Set the in point just past the second keyframe in the adjustment layer and set the opacity to 0. Then move in a few frames and set the opacity of the black solid to 100% and set the out point of the adjustment layer to the same spot. Then move down a frame or two and set another opacity keyframe for the black solid at 100% then move down a few frames and set the opacity to zero and set an out point for the black solid.
Figuring these things out is just a matter of looking at the frames and trying to figure how to stack layers up to achieve the effect. Grab some stills from various parts of an effect you are trying to copy and then try and figure out what you could do to the footage to get the same result. Only a few of the effects you see are just a single plug-in applied to a single layer. This is the best way to learn After Effects.
Here's what a comp would look like using a frame from the sample video. Note that the adjustment layer and the black solid are only a few frames long. I made a quick stab at the color grading of the frame by making some adjustments to the A and B colors of the glow, added some blur, and added a little color correction to the adjustment layer using curves. This should get you started.

Newbie M5 question - How does the Censor effect blur only the inside of the circle?

I'm brand new to Motion 5. I'm trying to understand how an effect like "Censor" applies the blur to only the inside of the circle. I opened the Censor effect in M5 and studied it, but the answer is just out of my grasp. Can someone explain it to me, or point me to an article that will help? Thanks.
Dan

In Motion, in the Censor effect project, if you turn off the Effect Source (lowest layer) you'll see the "circle" used to "limit" the effect.
Actually, this is just an illusion:
The original Effect Source (in FCPX, that's whatever clip this effect is applied to) is Cloned (the layer is called "Mask"): a clone is basically a "rasterized copy" of the original -- what I mean by that is that Clones not only copy original objects, but also all their filters and other layers/effects if you clone a group of objects -- reducing them all down to a single layer copy. This copy can be treated just like any other object in Motion (with an interesting exception*): you can add masks and other filter effects and/or behaviors to create new actions while the original source of the clone is left intact.
In this effect, there is a Circle Mask applied to the Clone, as well as three different Filters: Pixellate, Gaussian Blur, and Brightness. These three different filters are turned on and off separately by use of a "pop-up" rig so that only one of the filters is applied to the clone at a time. The gear shaped objects are Behaviors, in this case Link behaviors that "link" to the Circle Blur filter properties that is attached to the Effect Source which control the location in the canvas and the scale of the mask (Radius to Scale-X and another to Scale-Y). The Circle Blur filter has Onscreen Controls of a center point and a "radius" and those property values can be shared to other objects in a project via these link behaviors. The Circle Blur filter effect is turned off in this project because it *only* needed as a *source* for the onscreen control properties (and those can be turned on for use in FCPX [Publish OSC] whether the filter type is used or not.) All of the visible action in this project is created by applying other filter effects to the Clone copy and masking the area so that the rest of the source is uneffected while this effect (Censor) is active in FCPX.
The *interesting exception: Clones can be "retimed" -- even timed to go in reverse. No other object (other than actual video) can be made to do the same. What does this mean? It means that you can create, basically, an "in-project" video of other objects in animation (without exporting the animation first) and retime them to loop over and over, go in reverse, speed up, slow down, etc... Clones are a very useful tool in Motion (not to mention "light-weight"). Their only drawback: they *flatten* 3D animations, so you can't apply "more 3D" effects to them because they'll just look flattened on a plane if you do. So any time you feel you need to duplicate something, ask yourself if you would be better served by a clone instead.
HTH

Help!! How to get this effect in Photoshop?

How do you get this effect in PS7?
http://www.cobrastarship.com/media/justblaize.jpg
Thanks soo much!!

Photomatix.
http://www.hdrsoft.com/gallery/index.php
@ Chris

How to do this effect in photoshop?

How do I do the effect used in this photo – to cover a face with a layer that follows all the curves. And what do you call this effect?

This is called a layer mask that has had layer transparency done to it and, possibly a series of Layer effects, too! There are quite a few steps and procedures to create this type of effect.
I don't have the patience to try to give you each exact step by step to achieve this, but you might have better luck posting your query and image to a Photoshop users forum such as this.
Planet Photoshop.
http://planetphotoshop.com/
Someone there may have created the entire procedures to recreate this effect.
Good Luck!

Can someone tell me how to achieve this effect?

I know FlexStore :
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/flexstore.html
has a cool effect when you browse > Product Details. by
clicking one product.
1) Click the Product button.... to see Browse product panel
2) Click one of cellphone to see Product Detail panel
Note : Transition that occurs between.....
Does anyone know how to do this? name of the effect? or
Transition? any info i can start looking into?
Thansk,

It looks like it's a Move effect according to the source code
below. Hope this helps!
John
<?xml version="1.0" encoding="utf-8"?>


<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:productsView="productsView.*"
width="990" height="550"
currentState="showFilter">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import samples.flexstore.Product;
private var _catalog:ArrayCollection;
[Bindable]
public function get catalog():ArrayCollection
return _catalog;
public function set catalog(c:ArrayCollection):void
_catalog = c;
if (filterPanel != null)
filterPanel.filter.count = c.length;
public function addToCompare(product:Product):void
//setting the state before adding the product avoids
jumpiness in the transition, not sure why
currentState = 'showFilter';
filterPanel.productList.addProduct(product);
public function addToCart(product:Product):void
//setting the state before adding the product avoids
jumpiness in the transition, not sure why
currentState = 'showCart';
cartPanel.productList.addProduct(product);
]]>
</mx:Script>
<mx:HBox
styleName="colorPanel"
dropShadowEnabled="true"
height="100%" width="100%"
verticalScrollPolicy="off"
horizontalGap="0">
<productsView:Grip id="filterGrip"
gripIcon="@Embed('/assets/icon_magnifier.png')"
gripTip="Show filter panel" click="currentState =
'showFilter'"/>
<productsView:ProductFilterPanel id="filterPanel"
width="265" height="100%"
filter="catalogPanel.filter(event.filter, event.live)"
compare="catalogPanel.compare(filterPanel.productList.getProducts())"
creationComplete="if (catalog) filterPanel.filter.count =
catalog.length"/>
<mx:Spacer width="100%"/>
<productsView:ProductCart id="cartPanel" width="265"
height="100%"/>
<productsView:Grip id="cartGrip"
gripIcon="@Embed('/assets/icon_cart_empty.png')"
gripTip="Show cart" click="currentState =
'showCart'"/>
</mx:HBox>
<productsView:ProductCatalogPanel id="catalogPanel" y="4"
width="685" height="540"
catalog="{catalog}"
compare="addToCompare(event.product)"
purchase="addToCart(event.product)"
cartCount="{cartPanel.numProducts}"/>
<mx:states>
<mx:State name="showFilter">
<mx:SetStyle target="{catalogPanel}" name="left"
value="285"/>
</mx:State>
<mx:State name="showCart">
<mx:SetStyle target="{catalogPanel}" name="right"
value="285"/>
</mx:State>
</mx:states>

<mx:transitions>
<mx:Transition fromState="*" toState="*">
<mx:Move target="{catalogPanel}" />
</mx:Transition>
</mx:transitions>
</mx:Canvas>

How to do this effect?

How do you achieve this effect on 1:35. the clapping effect
http://www.vimeo.com/4441517

Looks like it's just random 1 or 2 frame cuts over the main shot.

Any ideas how to achieve this effect?

Hi there - I'm wanting to make some one layer stencils, and would love to replicate this effect, does anyone know a, if it has a name, and b how you'd go about creating it in photoshop (I'm fine to create the duotone high contrast image, just want the wavey line effect)Thanks for taking the time out peeps, fingers crossed D

Thanx for the response, I'll give both of those a try when Im back home laters, the 2nd idea sounds more likely to produce those sort of lines, its an effect I've seen quite often, so was surprised not to see more about it online (which is why I was asking if the technique had a name).
Its kind of a more messed up version of the lined (which sort of tapers off at each end) effect you get when zoomed in on some TV's (cept in this case is vertical rather than horizontal . . .

Anyone know how to make this effect?

Mac Miller - Clarity (Macadelic) - YouTube
I'm trying to recreate the same 'push and pull' kind of effect which you can hear most clearly from 0.00 to 0.35...
It's obviously using compression and I've tried sidechaing the sound to the snare and tweaking the attack and release settings but I still can't get this effect. It might also use some kind of delay technique...
Anyone have any ideas?

I'm not positive but, to me, it just sounds like a combination of individual loops perhaps with some fades to control the attack and decay. it could be a sawtooth wave on the white noise loop but it sounds like too much of a delay from the decay to attack which is why i think it's more likely individual clips. once you have the white noise part it seems to be a matter of playing your other parts (sounds like an organ part and a piano part) on or around the decay of the those clips. the loose timing of the keyboard parts along with lots of modulation give it that sort of sick see-saw effect.

(PS CC - QUESTION) How to do this effect?

Similar Messages

Maybe you are looking for