PS CC will not print to Epson 7900

Never had this problem, contacted Epson and was told to print out of other program like Preview. It worked! Why is PS CC suddenly causing this problem with my printer.

Epson wants you to buy a third party driver, which works fine under OSX with CS6 and CC. Epson has stopped developing their own print suit for PS in favour of that third party tool that actually uses their engine. That third-party tool is nothing more than a printer driver how it is supposed to be, Epson even bundles it with some of the printers now. I think its a rip-off: 1. Its expensive. 2. It uses Epsons own print engine. 3. Its not a real mac program its a wine emulation 4. its does not do anything really special.
If you put a single setting of the about 100 settings wrong, it won't print. Further it will not enlighten you with a useful error message, it will just not work.
So Epson leaves us with a barely usable driver (one setting of 100 wrong and it won't print) ... However the Question to Adobe has to be: Why is this dodgy Epson print driver working with CC (if you got all 100 settings right (paper width, borderless, banner....) and not with CS6 and CC 2014 (it cuts up without print).

Similar Messages

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Reader 10.1.3 Will Not Print on Epson 3800

I know it says printing problems solved, but today I wanted to print some tax forms and the dialog got as far as showing the file loading into the printer after accepting the Preview. Then it stopped. So at least for the Epson 3800 on Win 7, it won't work. However, it did print on an Epson Workforce printer on XP SP3. Both computers have the latest update.
One difference: with the 3800, I get asked if I want to save it and I have to say yes. The save is another file this time the extension is .prn which nobody can read. Or print.
I have the latest driver on the 3800, and it works in CS6 fine and also Open Office.

Followup:
I checked out another form and got the following notification:
After clicking OK, I also cannot print. In fact, I can find no Acrobat file that will print. It sure looks like it's the printing capabilities that are no longer enabled!

Adobe Reader will not print to Epson WF-2540 in Mac OSX 10.8.3

I have previously used Adobe Reader to print in both wired and wireless capacity to my Epson WF-2540 printer on my Mac OSX. My current version is Mac OSX 10.8.3. Recently (and it may have been following an update to my OS, I don't know for sure) the printing process hangs on "Looking for Printer." No error message is given, but the printing never commences. All other programs (e.g., Preview, Firefox, Safari) print normally to the printer. Any thoughts are appreciated!

Hi,
Have you tried installing the drivers below?
http://onlinesupport.fujixerox.com/processDriverForm.do?ctry_code=SG&lang_code=e n&d_lang=en&corp_pid=DCC240&rts=null&model=Document+Centre+C240&type_id=2&oslist =Mac+OS+X+10.8&lang_list=en
Correct me if I'm wrong, I'm not too familier with Fuji Xerox products but I assume this is the same model?

Iphoto will not print to Epson r2400

After downloading the most recent updates from Apple, I can no longer print from iphoto on my epson r2400 photo printer. I am running the latest drivers from the epson website but to no avail. I have even redownloaded the drivers and reinstalled them.
Whenever I try to print a picture the only things that happen is the printer begins to make noise like it is going to print and then I get a red exclamation point on the printer icon in the dock and a message saying "jobs stopped." Prior to this download everything worked fine in both iphoto and photoshop elements.
I also have an hp printer hooked up that I only use to print documents and it works fine. Any help someone could give me would be greatly appreciated.
Mac OS X (10.4.8) Powermac G5

sunseekr5:
Welcome to the Apple Discussions (and go Tigers!). Try removing the printer drivers with Printer Setup Utility and then reinstall them. If that doesn't help you can run Printer Setup Repair (available at VersionTracker.com) and see if that won't help.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Elements 11 will not work with Epson r2000 printer

Cannot make Elements 11 work with new Epson r2000 printer, works with all other applications. Epson tech support could not fix, said problems was with Elements 11. After making all settings including having Phtoshop manage color and turning off color management in printer, receive Photoshop prompt stating "printer is not compatible or printer settings are not correct. Need help, thank you.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

MacBook Air will not print on wireless Epson printer. It says 'filter failed'

MacBook Air all of a sudden will not print on wireless Epson printer. The error message is 'filter failed'. Shut down everything and rebooted, but still not printing.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.

CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

In the Print dialog box, click Print Settings and verify the Paper Size you chose. This is important because the 3880 has three paper feeds (auto sheet feeder, rear manual feed, front manual feed). And for each major paper size you have to choose not only the size but also the correct feed. For example, if you want US Letter, choose US Letter, notice that this menu expands to five more US Letter paper size options, and choose the specific US Letter paper feed you want.
If there is a mismatch between the paper size + feed combination you picked and the feed where the paper actually is, you can get the error that you're seeing. Because the Epson printer driver will look for the paper in a feed where there isn't any paper.
So if you've added US Letter paper to the automatic paper tray, in Paper Size double-check that you chose the US Letter submenu command that says just US Letter, not one of the other options like US Letter (Manual - Front).

Photoshop CC will not print to my Epson r2400

When I try to print from PS, I get the error window "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents".
I am using a Mac OS X 10.10.2 and my Photoshop CC 2014 will not print to the Epson r2400.
I can print with Illustrator CC and all other software programs on my Mac.
I've uninstalled my Epson r2400 Drivers, uninstalled everything associated with the printer drivers and reinstalled the new drivers after emptying the trash and restarting the Mac. My problem still persists. It seems to me it is a Photoshop Software problem!

Try opening "print" while holding the spacebar; this discards any saved values. Also, make sure the correct printer it set as default. If these fail, try resetting print: Open print and hold Option. The cancel button will become a reset - click the reset button.
Benjamin

My epson WF-3540 will not print.

After updating to Yosemite. My Epson will not print.,even with the the epson 2.19 driver update.
None of My devices can find my printer. It only works with USB plug directly to my iMac. .( iMac (24-inch Mid 2007,Processor-2.8 GHz Intel Core 2 Duo)
I've reinstalled software.
Unplugged and reconnected cables.
Print out from printer says everything passes ,network is good, but epson connect is disabled ?
What can I do next?
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: I
Processor Speed: 2.8
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM7
SMC Version (syste
Model Name: iMac
Model Identifier: iMac7,1
Processor Na

Network Printer Troubleshooting
If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Printer Troubleshooting - Yosemite
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Epson rx680 will not print after apple update print driver

I have an Epson RX680 which worked perfectly until I allowed the latest apple update to be installed with newest epson printer driver. It now will not print but comes back with a rasce blah blah error. Tried restoring to the previous software but to no avail.

https://discussions.apple.com/thread/5233149

Epson printer 3880 will not print

iMac 2009
OSX 10.8.5
After upgrading from Snow lipard to Mountain Lion bouth my Epson R1900 and 3880 will not print in Adobe Lightroom 5.
I have checked in the PPD file and the R1900 is listed but the 3880is not. I ran update from the apt stor and also tried the Epsom web site updates and still it will not work. I also tried the cds that came with the printers and I get this"You cant open the application :Epson" because powerPC applications are no longer supported.
Please help if you can. Nemo

Have you downloaded the 3880 drivers? There is a driver for 10.8 listed. You can check the same link for the other printer.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 141552&prodoid=63085147&infoType=Downloads&detected=yes&platform=OSF_M_X8
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 94511&prodoid=63073901&infoType=Downloads&detected=yes&platform=OSF_M_X9

Epson Stylus CX7300 will not print after software update

After doing the latest update for my Epson Stylus CX7300 printer it will not print. When i open the printer utility it comes up with a communication error. I can still scan documents but i can't print or even print a test page, check ink levels etc.

Hi Kerry Bonney,
Welcome to the Apple Support Communities!
If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Have a great day,
Joe

Epson N515 error message will not print

epson printer will not print. error messasge: "rastertoescpll quite unexpectantly"
Any fix available

Step 1
Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings. Then reinstall the EPSON update.
Credit for this solution to ASC user Yuengdog1983.
Step 2
If there's no improvement after Step 1, restore the following folder from the last backup you made before the EPSON update:
/Library/Printers/EPSON
You may have to reset the printing system for the change to become effective.

Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

I haven't been able to try this fix, but someone emailed me the below fix:
I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
It worked for me. Hope same for you.
I'm planning on trying this fix soon. Let me know how it goes for you if you get to try it before me. Will do the same. Thanks,
Chad

PS CC will not print to Epson 7900

Similar Messages

Maybe you are looking for