PS CS5 Location change alert.

Whenever I open PS CS5 I get a message that reads: " The application has been moved, and its path has changed.  to update the product configuration, click Update."  The product location is the same as it has always been (has not been moved) and selecting "Update" or "Do Not Update" has no impact on the issue...message reappears regardless of requesting an Update or not requesting an update>

Run the Creative Suite Cleaner Tool, reinstall the program. Some update of another program has busted a shared component or system DLL.
Mylenium

Similar Messages

  • "Tag for status change alerts" - how to find out if someone has tagged you

    Dear all,
    On the "Tag for status change alerts" functionality, I was wondering if there is a way to find out if someone has tagged you for change alerts. Please let me know if I can find this out directly or by using an available tool / plugin. I am an user
    and do not have access to the lync server.
    Thanks in advance

    Doulouz is right. It is not possible to check that.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Nexus 7010 bgp state change alert not triggered to NNM

    Hi ,
    BGP state change alert not triggered  to NNM on  Nexus -7010 for Monitoring.
    Details of the Device:
    Nexus 7010 :     
    Software
      BIOS:      version 3.22.0
      kickstart: version 5.1(3)
      system:    version 5.1(3)
    BGP neighbor status :
    Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
    172.16.1.2      4 65505 5089234 5194515    51359    0    0     6w2d 391
    172.16.1.3      4 65505 5044293 5146859    51359    0    0    30w4d 378
    172.31.11.3     4 15404  120744  114811    51359    0    0     1w6d 1
    172.31.42.3     4 65501 5261796 5264413    51359    0    0    2d06h 0
    Snmp trap enabled:
    snmp-server user admin network-admin auth md5 0x690c4ede8a88ba7f2de791dbe7a77f0a
    priv 0x690c4ede8a88ba7f2de791dbe7a77f0a localizedkey
    snmp-server host 172.30.0.55 traps version 2c xxxx
    snmp-server enable traps bgp
    Downloaded cisco-bgp4-mib version, bgp4-mib tried and performed snmpwalk  as given below
    nnmsnmpwalk.ovpl -c xxx 172.31.15.130 .1.3.6.1.4.1.9.9.187.0.6
    Error : No MIB objects contained under subtree
    nnmsnmpwalk.ovpl -v 2 -c xxx 172.31.15.130 .1.3.6.1.2.1.15.3.
    No MIB objects contained under subtree
    Kindly advise to resolve the issue
    Regards
    Hari

    You can set an alert for Warning State. This is feasible.
    Juke Chou
    TechNet Community Support

  • How can i change alert text size?

    hello everyone
    how can i change alert text size?
    thanks

    What about using the properties of the alert, there are several settings for the font (also one for the size)

  • Erver|Warning| Refreshing watchdog because of a calendar time change alert. 2014-06-11 03:58:13:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert. 2014-06-11 03:59:15:859|SyncServer|11493|0

    I allowed someone to use my 2010 MBP and later found out she was a thief and steals info.  I AM NOT COMPUTER SAVVY, however I was looking at my sync logs and found
    erver|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 03:58:13:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 03:59:15:859|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:00:17:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:02:13:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:03:16:026|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:04:18:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:06:13:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:07:16:014|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:08:17:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchd
    I have too many of these to count.  Also wanted to know if there is anything I need to check on my computer to see what she may have put on my computer or she may be accessing it?

    I allowed someone to use my 2010 MBP and later found out she was a thief and steals info.  I AM NOT COMPUTER SAVVY, however I was looking at my sync logs and found
    erver|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 03:58:13:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 03:59:15:859|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:00:17:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:02:13:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:03:16:026|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:04:18:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:06:13:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:07:16:014|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2014-06-11 04:08:17:001|SyncServer|11493|0x7f904b5068b0|SyncServer|Warning| Refreshing watchd
    I have too many of these to count.  Also wanted to know if there is anything I need to check on my computer to see what she may have put on my computer or she may be accessing it?

  • How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

    how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

    Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

  • How to hide save changes alert window when no changes made to the form

    hi,
    in my form when i close the form without making any changes it displays do you want to save the changes alert.how to hide this alert when no changes are made to the form window.
    regards
    Yesukannan

    Be advised that this solution will also exit the form without saving the changes and asking anything if the user did make changes.
    You're probably changing some field from a PL/SQL trigger (hint: post-query or when-new-record-instance are likely). If you set the value of a field from a trigger or program unit that also marks the record as changed for Forms. Forms will then ask to save the changes when exiting the form.
    If you want to prevent this, reset the record status after you change the field in the PL/SQL code.

  • HT2470 allow user full rights ie save files in any location, change file attributes etc - how, where?

    how and where do I give my user full rights ie to save files in any location, change file attributed(from read only ) etc

    The simplest way is with the chmod Terminal command.
    Warning: unless you know exactly what you are doing, you are almost certain to break something with indiscriminate use of this command. Make sure at least your data files are backed up (& ideally in offline storage) before you experiment with this command, & note that you can mess things up enough that you will have to reinstall the OS to recover.

  • How can i change alert tone for incoming messages on my ipad, for imessage?

    How can i change alert tone for incoming messages on my ipad, for imessage?

    Settings>Sounds>Text Tones

  • Personal website location changed

    my pesonal website location changed from http://<ip address>/~<user name>/ to http://<ip address>/~<user name>/xyz/abc.html.
    how to get the older location back.

    i used iWeb to host my website [Site_2] so it has changed from http://<ip address>/~<user name>/ to http://<ip address>/~<user name>/Site_2/welcome.html

  • PM:  Transaction IE02 functional location change creates new EQUZ?

    Everytime we execute transaction IE02 and change the functional location, it apparently creates a new EQUZ record (new valid from date).  There is a scenario where we do NOT want this to happen.  In other words, we have an equipment, say EQ123.  We want this equipment to have one history record per a cycle that might include several changes in the functional location.  When the cycle is complete, then we can create a new history (EQUZ) record.  That cycle might be warehouse departure to warehouse return.
    Is this possible.  If so, can it be configured or done so that this only applies to a certain set of equipment (say equipment belonging to plant PXYZ)?
    Thanks in advance,
    Glen.

    Glen,
    I hope I understood your requirement clearly. Usage history is mainly maintained in the ILOA and EQUZ tables together. So when u look up a usage list, data is retrieved from these two tables together. Now, there is a provision in customization to specify which field values if changed should appear as a history update. For instance, as u said if the functional location changes it should not be logged in the history. Whereas if the equipment steps out of the warehouse or returns there should be an update to its history. The following is the path in IMG to achieve this:
    SAP Customizing Implementation Guide--> Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Usage Period --> Define History-Related Fields
    thanks
    Bala

  • Should iOS Significant Location Change wake up my app after restarting a *locked* phone?

    I am building an app that uses the significant change API. Everything works fine except in a very specific case:
    If the user's phone is locked, and the user restarts the phone, then the Significant Location Change API will wake up the phone in the first few minutes and make a call to
    - (void)locationManager:(CLLocationManager *)manager didUpdateLocations:(NSArray *)locations
    All good, but at this point, if the user has yet to unlock their phone, the Significant Location Change will make no further attempts to wake up the app, even if I subsequently unlock the phone. Essentially, Significant Location Change monitoring gets turned off.
    N.B. that if I unlock (and re-lock) the phone before the SLC wakes up my app, then it will continue to wake up my app with any subsequent location changes.
    My question is: is this really the expected behaviour? Can anyone point me to documentation about the behaviour of the SLC API when the phone is locked, and specifically when the phone is locked and the device is restarted?

    Please let the OD Master and OD Replica replicate. You can reset the password manually on the wiki server. It may be a replica, but that doesn't mean you cant change things in the meanwhile.

  • Keep  getting Keychain password changed alert after removing password

    I Keep getting a "Keychain password changed" alert after removing a user account password my mother applied to the account and then forgot. How do I keep this message from continuing to appear?
    I am not really sure how the keychain system works as I have never used it on my own Mac.

    keychain is where you store the passwords you use on various websites, in mail and other apps. I suspect you use it too. but it's normally quite unobtrusive.
    by default the password to unlock the keychain is the same as the account password. but this does not have to be and you can change it. when you reset the account password the keychain password was not reset. unless you can recall the old account password the old keychain is of no use to you. go to the folder homedirectory/library/keychains and delete the file login.keychain (or move it somewhere else). then log out/in. a new empty keychain will be created with the password the same as the new account password and you can start saving passwords in that.

  • Operations Manager not updating IP phone location changes

    We have Cisco Unified Operations Manager and we noticed that for some time  IP Phone location changes were not registered and updated.
    There are couple of phones in All IP Phones/Lines list which are listed as still connected to old switches, while actually moved to completely new switch on different location .
    Also - in   Devices>Device Management>Inventory Collection>IP Phone       IP Phone Collection Status is always :  "Discovery in progress..."   with  Last Collection Start Time   and  Last Collection End Time  from couple of months ago...
    We have discovered two old bugs CSCsw26833 and CSCsv33965, but Restart PIFServer, pdterm PIFServer followed by pdexec SRSTServer and checking of netstat connection  did not change anything...
    What could be a problem, how can we start IP Phone collection?

    Hey George, thanks for the reply!
    Yes, you are absolutely correct. If I set Device Mobility Mode from Default to Off, the phone re-registers and the correct time for that time zone is displayed...!
    Awesome, thanks again George. Much appreciated!
    Thanks Again,
    Matt

  • Ethernet port stops working on location change

    I seem to have a problem with my ethernet port not working after a specific location change...
    I have three locations I used frequently. Let's call them:
    1) HomeWireless
    2) WorkWireless (used when I'm in meetings)
    3) WorkEthernet (used when I'm at my desk)
    My general practice is to change locations just before putting my MacBook Pro to sleep, and then it is happily ready for the desired network when it is awoken.
    I'm not sure what this change in behavior coincided with, but as of ~1 month ago, I am finding that going from WorkWireless to WorkEthernet, my ethernet port appears to be completely dead and I have to reboot the computer to reactivate it (yes, I've checked the cable itself and the wall port at they're OK). I've tried a couple ways of disabling & re-enabling it in software, but I don't get the impression anything actually resets this interface - suggestions are welcome as perhaps I just didn't try the right thing. I couldn't find anything quite the same as "networksetup -setairportpower" for the ethernet port.
    Oddly, this is not an issue with going from HomeWireless to WorkEthernet. Both HomeWirelss and WorkWireless have the ethernet interface deactivated in the Network pref pane, and perhaps the only notable difference between HomeWirelss and WorkWireless is that I use a static IP on the former and dynamic on the latter.
    Does anyone have an idea why this could be happening, or have any suggestions for something to check (e.g. some difference to look for between HomeWireless and WorkWireless that might hint at the issue), or at the very least a means of resstarting the ethernet port without rebooting.
    Thanks for any help,
    -Gene

    I'm still experiencing this issue. Anyone else? Any help on either understanding/fixing the underlying issue, or with resetting the Ethernet port to deal with it?
    -Gene

Maybe you are looking for

  • How to insert ORACLE HINT into select statement....

    Hi team, Can you please suggest me how to add an Oracle hint to point the Program to BSAD~1. Index BSAD1 has all three fields MANDT, BUKRS, AUGDT which are there in the where clause. But as per the execution plan index BSAD0 is being used which is th

  • How do I decrease .PDF file size?

    I'm creating .pdf files from work I'm doing in Indesign CS5 and the file size is HUGE.  I need to send the client (email) the pdf files in a smaller file size for approvals. Any suggestions?

  • IFS Document Search

    Hi , I'm new on IFS and trying to do something that I supposed it's quite simple but not having too much luck.. I'm performing a search (using the web interface) on the document content and getting correct results. I'd like to be able to when I open

  • Time Capsule to my TV

    Has anyone come up with a solution to stream media from a time capsule to a TV? I keep my TV shows (in .mp4 format) on my time capsule and I like to leave my iMac off to conserve power, so I want a solution to view my files on my TV. I thought about

  • Pls suggest aria2 frontend which remembers incomplete downloads

    I tried several FEs and they all forget the list of downloads when I close them. Which are without this flaw?