PS CS5 w/ ACR 6.7 cannot read Canon 7D CR2 files

Hello,
I recently upgraded from a Canon 50D to a Canon 7D.  On my iMac I am running PS CS5 Extended 12.0.4 and have updated to camera raw 6.7.0.339.  Unfortunately, PS is not reading the CR2 files from the Canon 7D; "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw".  From what I have read, Canon 7D support was added to ARC 5.4 and, by default, is a part of ACR 6.7.  All the similar posts list the solution as updating ACR to latest version which I have done. Ultimately, I would like to avoid converting the CR2 files to Adobe DNG.  I can confirm that the CR2 files in question are complete and are not corrupted as I can view them with both Windows and Mac photo previewers.
Any suggestions or ideas?
Thanks in advance!

Your new camera is a canon 7D or canon 70D?

Similar Messages

  • Cannot read canon 1DC raw files on CS5.1

    any body know how i can get the canon 1DC camera to work on CS5.1?  I can view the jpgs but not the raw files.  Can any one help?

    Refer identical discussion in Camera Raw forum
    Cannot get canon 1DC raw files to work on CS5.1?

  • HELP! Cannot open Canon RAW (CR2) file in PP5.5.2 (Mac)

    Hi folks.
    I cannot import RAW (CR2) files (Canon 5D2) files into premiere pro 5.5.2!
    I can get them into After Effects (through cameraraw) but PP does not even show them as a "supported file type"
    If I drag and drop from the finder I get "unsupported file type" error
    My understanding is that CR2 files are supported in CS5.5
    Any ideas
    MacBook Pro OS X 10.7.2 (Lion)
    For the rest, everything seems to be "normal"
    Thanks in Advance
    Tom

    To use Camera RAW, you will need to process the files through a Camera RAW converter. With the proper ACR module, PS, and Lightroom will handle that processing, as will the Canon utility. With Adobe ACR, make sure to update to a version that handles YOUR camera's RAW files - mfgrs. tweak those model to model, so keeping the ACR module current will insure that you can handle the particular Camera RAW files properly.
    I agree with Stephen's rec. to NOT use JPEG, if ultimate quality is of a concern. In PS, I just process my Nikon, Panny or Canon Camera RAW files to PSD. I would assume that the Canon utility would have the option for TIFF, as my older one does - there is no option for PSD in it. Do not know about the newer Canon Camer RAW processing, but TIFF should be just fine.
    Good luck,
    Hunt

  • Cannot read Cannon S100 RAW files on Aperture

    Aperture cannot read canon S100 RAW files even after the latest update. Cannot install old updates once the latest is installed.
    Should i try to reinstall Aperture and download the specific update for the Canon S100? or does the latest update include old ones?
    Thanks,

    Not sure now the link I posted got changed but here OS X Mavericks: Supported digital camera RAW formats is the correct link.
    If you are running the latest software (BTW what version of Aperture are you running?) and still cannot see the raw files from your S100 try opening them in Preview and see if they work there.  If they do not work in Preview also then as was written above you probably need to change the settings on the camera.
    regards

  • I cannot read Nikon D600 raw files with CS5

    I cannot read Nikon D600 raw files with CS5, I have tried Camera Raw 6.1 update but that has not worked.

    Nikon D 600 will work with ACR 7.3 which needs minimum of PS CS 6  : http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    With PS CS 5, ACR 7.3 will not work.
    So either you need to upgrade to CS 6 or use DNG converter to convert images to DNG format which you can open in CS 5

  • Cannot read from the source file or disk

    I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work.  So I ordered a Recovery Disc set from Toshiba. 
    A few minutes after I insert the 3nd disc, I get the following message:
    Cannot read from the source file or disk
    PREINST14.SWM
    Type: SWM File
    Size:  670 MB
    Modified: 10/29/2010 11:24pm
    Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
    Cannot read from the source file or disk
    PREINST18.SWM
    Type: SWM File
    Size:  372 MB
    Modified: 10/29/2010 11:24pm
    Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
    An error has occurred.
    Error:  10-FC06-0002
    Recovery Error.
    Please press [OK] to turn off the computer.
    I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.

    It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
    - Peter

  • Cannot open Canon CS2 Raw files in Bridges and Photoshop

    I cannot open Canon CS2 Raw files in Bridges and Photoshop. I have never been able to open it.

    Here are what cameras are supported by what version of the ACR plug-in and Lightroom:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here are what Adobe programs use what version of the ACR plug-in:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • CS4 won't read Canon T1i raw files

    CS4 won't read Canon T1i raw files. Is this a known problem? Is there an update or plugin that I need to download? If so, where can I find it? Thanks for your help.

    T1i support was added in Camera Raw 5.4. It sounds like your Camera Raw may be out of date.
    From within Photoshop, choose "Updates…" from the Help menu. It'll do its thing and eventually Adobe Updater should tell you updates are available. Run through that install process and you should be set to go.
    Note that you will have to quit Photoshop during the installation process, so make sure all your work is saved.

  • After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

    I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
    I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

    Here's the meaning of the error that you received.
    "An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
    Possible that the problem is on the recovery also.
    Hope this helps.

  • Photoshop Elements 12 Cannot Read Sony A7Mk2 ARW File

    Hello,
    My Photoshop Elements 12 (v12.1) program cannot read raw riles from a Sony A7Mk2 ILCE-7M2.  I have updated to the latest Adobe Camera Raw Plug-In (8.5.0.236) which purportedly supports this camera's raw files but it does not.
    The error received is "Could not complete you request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw."
    I tried all the troubleshooting steps on Adobe's help pages including uninstalling and reinstalling the Adobe software.
    One possible reason for the problem:  On the page listing supported cameras, Camera Raw plug-in | Supported cameras, the A7Mk2 appears to be listed as "Sony ILCE-A7M2" which appears to be a mistake as the correct model is "Sony ILCE-7M2" (i.e. no "A").
    Very frustrating given that I bought Elements for this specific purpose!
    Any help would be greatly appreciated.  Given the amount of pictures I take, converting to DNG isn't really an viable option.

    I believe the said Sony A7Mk2 ILCE-7M2 (adobe calls it Sony ILCE-A7M2)  needs at least camera raw 8.7.1, so you can either use the 8.8 adobe dng converter or upgrade to pse 13, which would open those files directly without the need of the dng converter.
    (you would need to to use Help>Updates in the pse 13 editor to get the camera raw 8.7.1 plugin)

  • Organizer 10 cannot read or display MTS files.

    This topic was discussed earlier this year, and the answer at the time was to uninstall/reinstall PSE and AEP.  Has Adobe figured out what the problem is?  It there an easy method to fix this issue, or is this brute force method the only method to fix this?
    tks,
    Dennis 
    Beaufort, SC

    Hello Ujwala,
    There are a lot of related threads on this forum which suggest to do a save as on both the client and the SharePoint server. Just to check if the image hyperlinks can be resolved when you do it manually:
    https://social.technet.microsoft.com/Forums/en-US/e7c80d79-a52a-4e79-ad86-a8751a868f18/word-automation-services-error-cannot-read-or-display-file-while-converting-html-to-pdf-with?forum=sharepointdevelopment
    - Dennis | Netherlands | Blog |
    Twitter

  • I cannot read Greek emails or files from Office

    I receive emails in Greek and Mail cannot read them. The same thing happens with files in Office.

    For some reason the app or service sending you the email encoded it as iso-8859-1, which is only good for Latin, never Greek.  The content was destroyed by that, there is nothing you can do at your end.  Any fix has to be done at the other end.
    For office problems, it is probably best to search/ask in the forums devoted to that stuff
    http://answers.microsoft.com/en-us/mac/forum/macword

  • Cannot get Canon 1dC Raw files to read in photoshop 6

    Photoshop will not read my canon 1DC raw files in photoshop 6 can anyone help?

    I have tried to do updates but still nothing has worked.  so frustrating so please can anyone shed some light on my issues?

  • When will LR read Canon 40D RAW files?

    Any ideas when Adobe will post an update for the new Canon 40D RAW files?
    Neither LR 1.1 or ACR 4.1 can read them.
    Thats the major problem when new camera models are introduced and one have got used to the LR workflow.

    I know that when the 30D came out, it was not similar to the 20D. One main difference as these new models come out is that they are higher resolution than their predecessors. There was a hack that came out shortly after the 30D came out that managed to make ACR work by using the 1D Mark II specification (I think), but it did not work reliably.
    At the time, the history was that ACR was being updated about every 4 months if for nothing more than to accommodate new cameras. If you assume that that pace would continue, then ACR would be "due" late September, and LR maybe a month after that.
    That is pure speculation on my part based on history, no guarantees, of course.

  • Cannot open Canon 6D Raw files in CS6 [was:Camera raw update]

    Could someone please help me. I am struggling to get Photoshop CS6 to accept my Canon 6d raw files.
    As far as I can tell I have downloaded Camera raw 8.3 and have run the installer but still Cs6 won`t accept my images.
    I`m fairly new to CS6 so could someone please help me?
    Many Thanks.

    Here are what cameras are supported by what version of the ACR plug-in and Lightroom:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here are what Adobe programs use what version of the ACR plug-in:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Maybe you are looking for

  • IPP - Can't get it to work on port 631

    So I'm trying to enable IPP printing so that various anonymous guests on our wireless network can use one of the office printers that we currently have.  Server is 2008 R2, and most printers are HPs.  Regular printing works fine. I've got IPP working

  • Problems with Ai opening (in Windows 7)

    After Ai installation, I tried to open it. Unfortunately, the window opens and after some seconds closes. No error messages occur. I've tried to reinstall application. Nothing changed – still not opening. Does anyone have any suggestions? Thanks!

  • Associating process code with output type ?

    How to associate a process code with an output type ?

  • Find IP Attachment link (FB02).

    Hello experts. In FB02 transaction, I have to modify the link stored in attachments list. In my attachment list, I have a line called "archive". If I double-click on it, it opens me an internet explorer page, with a link (IP adress in it) Where can i

  • License upgrade cost

    Hi, Is there any cost involved to upgrade Oracle 9i standard edition to 11g? The license was purchased in 2004. Thanks!