PS CS6: stroke color picker preview in real time not working

re: NEW color picker stroke color not updating in real time (previewing).
Is it me or has the stroke color preview been removed in CS6 or is there a setting that needs to be changed to enable it?
The problem: When I create a shape layer, press enter and then chose a stroke color from the color picker, I select a color but it doesnt update the stroke color until I press enter. I'm sure it used to change in real time as you clicked on the color picker panel before accepting it.
Any sugestions or ideas as to whats going on or am I going mad?
Further update: This is when creating a shape but using the new stroke feature in the properties bar at the top (the one which gives you the new fancy options like having a dashed, transparent or gradiented stroke) and not the traditional method of adding it as an effect. This still shows a real time update, but the new method doesnt.

Curt Y wrote:
zarrdave wrote:
You're then moving the colour picker dialogue box to one side so you can see he shape created, and you've then tried clicking on different colours and the border color has changed after each click (but before you press OK)?
If thats working so the color changes in real time for you, then unfortunatley I've got a problem with my version.
Using Win7 CS6 extended, and following your instructions it works for me.
Border changes withn I click on color pallet with color picker.
Odd, same version/ O.S. here, thanks for that though Curt Y. Are you sure you're not clicking on the preset colours and actually using the color picker dialogue box.
I've been in a bit of a rush here at the office and appologise for not being clearer and posting a screencap earlier.
To clarify, its the Cyan dialogue box not the orange box I'm talking about (nice choice of colours I know ). The top right icon in the organge box with the colours in is how you get to it.

Similar Messages

My color picker in elements 8 is not working

When I pick a color with the color picker on Photoshop Elements 8 and I click OK, no matter what color I pick it shows gray. What is wrong??

Thank you. It only went to grayscale when I opened a new blank file. Now it works. Never happened before. I must have inadvertantly hit the grayscaler mode key when I opened the blank file. Thanks again.

Color picker and eye dropper tool not working

is there stright forward tellephone number to report and progam error on cs6 so i can get some thing do about this, adobe seem a big workn around why can't they just leave a tele number

Update your graphics driver and check your color profile settings. Not a bug, just a bad configuration on your computer.
Mylenium

How Real Time Apply works while physical standby is open in Read Only mode

Hi,
With Active data guard option, we can open physical standby DB in read only mode, while redo log are being applied. (Real Time Query)
Standby Redo log (SRL) enables Real Time Apply (with "USING CURRENT LOGFILE" clause in recover database command on standby DB)
I am interested to know, how Real Time Query works ?
What is the mechanism with allows us to open physical standby DB in read only mode while redo logs are being applied continuously ?
Regards,
Sujit

Dear user7419391,
That is a new feature in Oracle Database 11g. MRP can use the real time apply in 10g but the concept here is different.
Taken from the following document;
http://www.ascent.co.za/documents/oracle/Oracle%20databse%2011g%20Active-Data-Guard%20datasheet.pdf
*Unique Advantages of Oracle Active Data Guard*
+Active Data Guard is an evolution of Data Guard technology, providing unique+
+performance advantages while leveraging all other enhancements included in Oracle+
+Data Guard 11g. For example, any Data Guard 11g physical standby database can+
+be easily converted to a Snapshot Standby. A Snapshot Standby is open read-write+
+and is ideally suited as a test system, able to process transactions independent of the+
+primary database. A Snapshot Standby maintains protection by continuing to receive+
+data from the production database, archiving it for later use. When tests are+
+complete, a single command discards changes made while open read-write and+
+quickly resynchronizes the standby database with the primary.+
The other link in the previous post is excellent and you really have to read it to understand the active data guard aspects.
Regards.
Ogan

Preview and Mac Mail not working after upgraded to 10.4.11

Hello,
I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
Urgent help please.
Thank you
Benny

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

Welcome to the 'wonderful' world of HTML5 e-learning.
In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up.

Can you think of a nifty trick to work in grayscale, while previewing in real-time a 2 color separation?

I need to come up with a procedure that allows a customer to work on a black and white image while assessing the effect of a translation into a 2-color separation.
To visualize what I’m looking for, place a grayscale image in the magenta channel of an empty (white) cmyk document, and the same grayscale image inverted into the yellow channel. The other 2 channels stay empty (white).
Now we have the white end of the grayscale expressed as yellow, the black end as magenta. Since one channel is a direct inversion of the other, the sum total of the 2 is always 100% at any point along a gradient.
I have written a action, that allows one to quickly look at the effect, but what I am being asked is to is to deliver the same thing in real-time.
Duotone? NO!
In a duotone document I can only move one curve at atime, thus creating overlap (too much red) or a gap (whashed-out hue) between the profiles of the 2 curves.
CMYK? NO!
In a cmyk document I have the option to move 2 curves simultaneously, but what I would need is an option to work one curve, while the other automatically moves equally in opposite.
Gradient mapping?
Here I have a rudimentary way to set the starting, mid, and endpoints, but it needs to be done in RGB and I don't know of any way to separate the resulting RGB channels into a grayscale that maintains all the information.
Anyone? Any ideas are much appreciated.

Mars_Red wrote:
I need to come up with a procedure that allows a customer to work on a black and white image while assessing the effect of a translation into a 2-color separation.
To visualize what I’m looking for, place a grayscale image in the magenta channel of an empty (white) cmyk document, and the same grayscale image inverted into the yellow channel. The other 2 channels stay empty (white).
Now we have the white end of the grayscale expressed as yellow, the black end as magenta. Since one channel is a direct inversion of the other, the sum total of the 2 is always 100% at any point along a gradient.
I have written a action, that allows one to quickly look at the effect, but what I am being asked is to is to deliver the same thing in real-time.
Duotone? NO!
In a duotone document I can only move one curve at atime, thus creating overlap (too much red) or a gap (whashed-out hue) between the profiles of the 2 curves.
CMYK? NO!
In a cmyk document I have the option to move 2 curves simultaneously, but what I would need is an option to work one curve, while the other automatically moves equally in opposite.
Gradient mapping?
Here I have a rudimentary way to set the starting, mid, and endpoints, but it needs to be done in RGB and I don't know of any way to separate the resulting RGB channels into a grayscale that maintains all the information.
Anyone? Any ideas are much appreciated.
Mars Red,
This might work. Assuming you now have a CMYK document, with no cyan, no black, and magenta and yellow are inversions of one another
1. Create a solid yellow fill color layer on top, blend mode normal 100% opacity
2. Create an empty layer on top of that, blend normal, 100% opacity.
3. Select all, fill this layer with solid magenta
3. Hide this and the yellow layer
4. Load the magenta channel as a selection
5. Click on the solid magenta layer, Layer - Layer Mask - Hide Selection
6. Show all the layers
7. Click on the mask on the magenta layer. You can apply curves to this mask. No matter what you do to the mask, the yellow separation will always remain an exact inversion of the magenta. You will always have 100% ink coverage in every area, no more, no less. The only catch is the mask is opposite the ink, so curve adjustment is opposite of ink behavior.
That is CMYK solution. Here is duotone solution, much simpler:
Assuming you have a grayscale image:
1. Mode duotone
2. Type duotone.
3. Ink 1 : color picker, CMYK, 100M (yields name Magenta)
4. Ink 2: color picker, CMYK, 100Y (yields name Yellow)
5. Ink 2 curve: 0 = 100, 100 = 0 (inversion)
6. Hit enter. Now you can make curve adjustments to the duotone channel (not the duotone curves) using Image: Adjustments: Curves. No matter what you do to the duotone channel, you will maintain inversions of magenta and yellow, and you will always have 100% ink coverage in any given area.

RAM Preview in real time with Matrox Mini

I followed this thread with interest. I upgraded from Production Premium CS5 to CS6 last month. I haven't been able to get Realtime RAM playback since. I'm also monitoring using a Matrox mini and am wondering if this is factoring into the problem. I recently replaced my mini because I was losing communication with the box. I did notice, with the box out of the equation, that RAM playback was in realtime. My test comp runs 5 seconds at 29.97 fps, just a photo moving from point a to b to c, with blur, over black. When I try RAM playback, the message I see is: fps 11.xxx (xxx because the frames vary slightly throughout playback)/29.97. Note: Zoom in not 100%. Interesting thing is that when I delete the photo layer and just keep the black, RAM playback seems fine.
I did adjust my RAM allocation a little, to no effect. Here are my specs:
Computer:
Windows 7 Professional, SP1
i7-4930k 3.4 GHz (6 cores, 12 with hyperthreading)
RAM: 32 GB
GPU: Nvidia GeForce GTX 770
Here are some memory settings:
Installed RAM: 31.9 GB
RAM for other applications: 6 GB
RAM shared by AE, Premiere, Prelude, Encore, Adobe Media Encoder, Photoshop: 25.9
Installed CPUs: 12
CPU reserved for other applications: 2
RAM per CPU: 2 GB
Actual CPUs that will be used: 8
Preview info:
Texture memory: 796 MB
Ray-tracing: GPU
Open GL
Vendor: NVIDIA Corporation
Versions: 2/1/2
Total memory: 1.94 GB
Shader model: 4.0 or later
Cuda
Driver version: 6.0
Devices: 1 (GeForce GTX 770)
GeForce GTX 770
Current Usable Memory: 1.68 GB (at application launch)
Maximum Usable Memory: 2.00 GB
Let me know what else I can tell you. Thanks for any suggestions.

If you disable video preview in After Effects to the Matrox device, does RAM preview run in real time?
In After Effects CS6: Preferences > Video Preview, set Output Device to Computer Monitor Only. Matrox devices may also require you to disable WYSIWYG preview in their control panel.
When video preview is enabled, every frame is transcoded on the fly at display time to the format (dimensions, PAR, frame rate) requested by the device. This requires some memory and processor power and has an impact on performance. If having video preview enabled is in fact contributing to the issue, you can reduce the memory requirements of the frame (and therefore the processing power required) by reducing the RAM preview frame rate or resolution values in the Preview panel, reduce the project color depth, or disable color management in the Project Settings.
Worth noting here that After Effects CC 2014 (13.0) uses Mercury Transmit for video preview, instead of the older QuickTime and DirectShow technologies, and while it is still subject to the limitations above it provides better performance.

After Effects will not RAM Preview in real time

Recently I have started working on a new project and can't work on it because my RAM Previews are not in real time anymore. I have only had this problem since I started this project a few days ago. Every other project I have done I've never had this problem before.
I have 10 GB of ram allocated to After Effects, my clips are in 59.94 fps which I have set the composition to as well. When I ram preview it tells me 50.019/59.94 I know what this mean, I understand it's telling me to change my composition's frame rate to 50 frames, however if I do this then music plays too slow. Right now my problem is that the clips aren't playing fast enough for me to see if my editing and time syncing is acurate. When I render the video everything is synced up fine but this is making my editing very inconvenient and I would like a fix please. I tried: Clearing my disk and media cache, unchecking "render multiple frames at once", taking off all effects on the clips, using different clips, AND even reinstalling After Effects CS6 but nothing has worked. I really badly need a fix to this problem. Any help would be greatly appreciated thanks!!

> The clips are in 59.94 frames, so the composition is in 59.94 frames. If when I upload to the internet it goes down in frame rate so be it.
You are misunderstanding the typical video workflow.
Composition setting are supposed to match the characteristics of the intended output, not necessarily the characteristics of the imported footage. This is how you ensure that what you preview exactly matches what you output and what your viewers will see. Consider, also, that most compositions use assets with many different frame rates, sizes, etc.
> I do have a large monitor but I've been using this monitor since December and haven't had a problem with it until now.
Great. But you're having a problem now. And it's because of a bottleneck somewhere between your RAM and drawing the pixels to the screen. One more reason that this might be happening is that you're running a GPU-heavy application; note that web browsers can also be GPU hogs these days.

Apple Color Picker Erase Swatch function no longer works.

It was always possible to erase one of the swatches in the ubiquitous Apple Color Picker by dragging a white square over the swatch square you wanted to erase. Now that function doesn't work anymore. Very odd. You can add new colors as always, you just can't erase them. In any application where I use the Color Picker this function no longer works. For example Pixelmator, Rapidweaver, etc.
Any ideas?

Sorry, I read too much into it. I guess I couldn't imagine it was just scrolling. I was thinking you were talking about going from page to page with a swipe gesture.
Given that, their software is either broken or something is interfering. Any other programs have a problem with two-finger scrolling?

Color management in Save for Web not working

The Save for Web dialog box in the CS6 Beta is ignoring color profiles, so color is not managed. This has not been a problem in previous versions.

The saved output is just fine. I was referring to the images in the Save for Web dialogue
I just checked my settings. CS6 apparently changed my Preview setting from "Use Document Profile" to "Monitor Color." It also changed my Metadata setting. It should not do that!
Restoring the correct Preview setting solved the color management problem, but ONLY for the Preview image. The Original image is still not color managed.
I'm on a wide-gamut monitor, so sRGB images come out looking garish if there's no color profile embedded or it's ignored. That's what's happening here with the Original image in Save for Web. I imported an sRGB image with profile embedded, and it looks just fine in Photoshop while editing. Then I went to Save for Web, with the settings Embed Color Profile, Convert to sRGB, and Preview: Use Document Profile. The JPEG preview too looks just fine with these settings, but the Original looks garish, showing a lack of color management. The color in the two views is showing as completely different, though they both represent the same image with the same color profile embedded.
Going back to CS5, the same image is properly color managed in both Original and Preview. Both images show identical color, as they should.

Mac Finder previews for .AI files not working

[I'm using fully updated OS X 10.8.5, using Illustrator CS6 16.0.4]
In the Finder, all my .AI files show up only as a generic AI file icon. Trying to Preview the files in the Finder also only show the generic icon.
I've tracked down the QuickLook Generator locations, and found that I've got a generator named "illust.qlgenerator". But when I run in the Terminal.app this command: "qlmanage -t <ai file>" tells me this:
[WARNING] Plug-in at file://localhost/Library/QuickLook/illust.qlgenerator/ is 32bit
[ERROR] Can't load plug-in at file://localhost/Library/QuickLook/illust.qlgenerator/: The bundle “PDF” couldn’t be loaded because it doesn’t contain a version for the current architecture.
That Quick Look Generator is only 32-bit, which seems to be causing problems.
When I moved it to a different folder to disable it, then the native PDF.qlgenerator takes over, and puts the obnoxious grid behind the previews.
Problems with the OS X PDF QuickLook generator:
Obnoxious grid behind the actual content instead of resizing to maximize the thumbnail
Native .AI files saved without PDF compatibility show no preview, just "This is an AI file without PDF content"
To get the preview, saving with PDF compatibility would double the file size. Double.
And I still get the grid.
Is there a native Illustrator QuickLook Generator? I don't want to uninstall and reinstall CS6 just to find there's no difference. Does CS6 install any better previews than I'm getting? Another Mac user with the same setup shows beautiful full-color previews of the same AI sample files without requiring PDF compatibility or the obnoxious grid.
Thanks
Darryl Z

Hi Monika,
Unfortunately, I neglected to mention that because I work with very large illustrations with many layers, paths and nested symbols the PDF preview is not very fast.
I prefer not to save a complete pdf inside my AI files because it multiplies the file size which I find slows the cloud synchronisation of the very large files I work on.
A quick raster preview would be the most performant option, lazy loading any available pdf or ai render if the item was enlarged.
Thanks,
Luke

Photoshop CS6 Problems- Shortcuts are Stuck! Lasso Does Not Work!

Hi there! I'm a Mac user with a Cintiq 12WX tablet, and I just upgraded to Photoshop CS6. I use it primarily for art, but I've come across some problems that have really interrupted my workflow. A lot of the time, certain functions seem to not work or get stuck. Here are my problems specifically:
1. My Undo shortcut is set to Command+Z. Some of the time it works fine, but most of the time I keep hitting the command and nothing happens! So if I want to delete a brush stroke, I usually have to tap multiple with my stylus and make more strokes in order to get Undo to work. Frustrating!
2. The lasso tool works sometimes, but a lot of the time it doesn't select anything. So I have to keep repeating the stroke until it does select.
3. Sometimes, the keyboard shortcuts just don't work! And even if a tool is selected, I can't do anything with it!
These problems are all completely random, I have no idea what triggers them. I've read of other people having similar problems, but I have yet to find a solution. Nothing like this happened in CS5. Does anybody know how to help me? I make me living with art and these problems have really slowed me down. Thank you!

What OS Version are you using?
It sounds like you are on MaCOS, did you install the WhiteWindowWorkaround plugin to avoid the known MacOS bugs?

File - Export from Preview, iPhoto etc does not work

Lately, normal operations from OSX-programs are not working as expected on my MacBook Air mid-2013 running OSX 10.8.5. I can reproduce in PreView and iPhoto that operations like File, Export and File, Duplicate do not work - there is just no response.
Upon opening console, I see the following error messages:
10/11/13 3:23:50.170 PM com.apple.security.pboxd[487]: CGSGetWindowTags: Invalid window 0xc8
10/11/13 3:23:50.170 PM com.apple.security.pboxd[487]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
10/11/13 3:23:58.950 PM com.apple.launchd[1]: (com.crashplan.engine[735]) Exited with code: 1
10/11/13 3:23:58.950 PM com.apple.launchd[1]: (com.crashplan.engine) Throttling respawn: Will start in 10 seconds
10/11/13 3:24:00.167 PM Preview[456]: RVS:__54-[NSRemoteSavePanel _runOrderingOperationWithContext:]_block_invoke_0319 : Timeout occured while waiting for the window
10/11/13 3:24:00.171 PM librariand[459]: [ERROR] [913.272s] com.apple. SRMessageTransport.c:498 SRConnectionCreateClient() timed out waiting for the server to post the started notification
10/11/13 3:24:00.171 PM librariand[459]: [ERROR] [913.272s] com.apple. framework_client.c:810 IPCEnableSyncing() failed to run server: -1
10/11/13 3:24:00.172 PM librariand[459]: [ERROR] [913.272s] com.apple. UBService.c:598 UBServiceEnableMobileDocuments() IPCEnableSyncing failed with error: The operation couldn’t be completed. (UBErrorDomain error 2.)
10/11/13 3:24:08.972 PM com.apple.launchd[1]: (com.crashplan.engine[736]) Exited with code: 1
10/11/13 3:24:08.972 PM com.apple.launchd[1]: (com.crashplan.engine) Throttling respawn: Will start in 10 seconds
10/11/13 3:24:18.996 PM com.apple.launchd[1]: (com.crashplan.engine[737]) Exited with code: 1
10/11/13 3:24:18.996 PM com.apple.launchd[1]: (com.crashplan.engine) Throttling respawn: Will start in 10 seconds
10/11/13 3:24:20.174 PM librariand[459]: [ERROR] [933.275s] com.apple. SRMessageTransport.c:498 SRConnectionCreateClient() timed out waiting for the server to post the started notification
10/11/13 3:24:20.175 PM librariand[459]: unable to enable mobile documents
10/11/13 3:24:20.175 PM librariand[459]: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Please help...

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

People Picker/Edit Web Parts/More not working in IE11

So, we just installed IE11 in our company and found the following issues with SharePoint 2010:
People Picker not working
At Search site, when you type in string(s) and hit Enter, nothing happens (you must click the search button)
Cannot edit web parts on Wiki Page
After doing some exhaustive homework (and installing Sep 2014 CU to see they were fixed), the only 2 solutions are:
Run in compatibility Mode
Fix the below tag in the Master Page and People Picker headers (14 hive)
meta http-equiv="X-UA-Compatible" content="IE=8"
So, I just want to know if others have encountered this and what they did to resolve (compatibility mode or change the tags or other).
I have a ticket open with Microsoft, we installed Sept 2014 CU, and are still having these 3 issues.
Godspeed,
Herschel

Hi,
Thanks for posting your issue,
We know that IE11 has compatibility issues. Kindly follow below mentioned steps to solve this issue
1. Installed all the latest Update for IE 11
2. Add the site in compatibility Mode (Tools> Compatibility view settings> type site name> add)
3. Add the site in trusted sites and set the security Zone level to low ( IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
Also, browse the below mentioned URLs for more details to fix this issue.
http://www.proactivespeaks.com/2013/09/12/fixing-sharepoint-compatibility-issues-with-internet-explorer-ie-9-and-ie-10/
http://saiabhilash.blogspot.in/2012/12/people-picker-to-add-users-to.html
http://sinclairinat0r.com/2014/02/25/sharepoint-2010-people-picker-and-workflow-compatibility-fixes-for-ie10ie11/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

PS CS6: stroke color picker preview in real time not working

Similar Messages

Maybe you are looking for