PS Elements 10 printing

I'm using Elements 10. I want to print a 16" (h) x 20" (w) image. The paper I'm using is 17"x22". I've clicked on the 17"x22" paper size. Under "Select Print Size" I clicked on "Custom" and typed 16" x 20". The output is 15" x 20". What can I do to get a 16" instead of 15" high printout?

What are the pixel dimensions of your photo? A photo which is the right shape for a 15 x 20 print is not the same shape as one that will make a 16 x 20 print.

Similar Messages

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Poor Elements print quality

I am using PS Elements 7.0 and my printer is an HP Photosmart 637. I take pictures using .JPG usually in a large format on a Canon 40D. My pictures look fantastic via Elements (on the monitor), but are "washed out" upon printing. Colors appear dull and generally do not look anything like the images on the screen.
Recently I sanpped an image, uploaded it to PS Elements, printed the image to my HP. I then removed my compact flash, pluged it into my HP and printed the same image with much better results. What am I doing wrong in PS Elements that would create sub-par images?
Thanks very much in advance.

Please elaborate on this: "JPG usually in a large format ."
Go to Image>resize>image size, and provide height & width in inches for the file, and the resolution in px/in
Further to previous post, is color managed both in Elements and in the printer, based on current configuration?
Are you using ink and paper from same manufacturer?

Lots of blank space when printing array with only last element printed

I have a slight problem I have been trying to figure it out for days but can't see where my problem is, its probably staring me in the face but just can't seem to see it.
I am trying to print out my 2 dimensional array outdie my try block. Inside the trying block I have two for loops in for the arrays. Within the second for loop I have a while to put token from Stringtokeniser into my 2 arrays. When I print my arrays in this while bit it prints fine however when I print outside the try block it only print the last element and lots of blank space before the element.
Below is the code, hope you guys can see the problem. Thank you in advance
   import java.io.*;
   import java.net.*;
   import java.lang.*;
   import java.util.*;
   import javax.swing.*;
   public class javaflights4
      public static final String MESSAGE_SEPERATOR = "#";
      public static final String MESSAGE_SEPERATOR1 = "*";
      public static void main(String[] args) throws IOException
         String data = null;
         File file;
         BufferedReader reader = null;
         file = new File("datafile.txt");
         String flights[] [];
               //String flightdata[];
         flights = new String[21][7];
         int x = 0;
               //flightdata = new String[7];
         int y = 0;
         try
            reader = new BufferedReader(new FileReader(file));
            //data = reader.readLine();
            while((data = reader.readLine())!= null)
               data.trim();
               StringTokenizer tokenised = new StringTokenizer(data, MESSAGE_SEPERATOR1);
               for(x = 0; x<=flights.length; x++)
                  for(y = 0; y<=flights.length; y++)
                     while(tokenised.hasMoreTokens())
                        //System.out.println(tokenised.nextToken());
                        flights [x] [y] = tokenised.nextToken();
                        //System.out.print("*"+ flights [x] [y]+"&");
               System.out.println();
            catch(ArrayIndexOutOfBoundsException e1)
               System.out.println("error at " + e1);
            catch(Exception e)
            finally
               try
                  reader.close();
                  catch(Exception e)
         int i = 0;
         int j = 0;
         System.out.print(flights [j]);
//System.out.println();

A number of problems.
First, I bet you see a lot of "error at" messages, don't you? You create a 21x7 array, then go through the first array up to 21, going through the second one all the way to 21 as well.
your second for loop should go to flights[x].length, not flights.length. That will eliminate the need for ArrayIndexOutOfBounds checking, which should have been an indication that you were doing something wrong.
Second, when you get to flights[0][0] (the very first iteration of the inner loop) you are taking every element from the StringTokenizer and setting flights[0][0] to each, thereby overwriting the previous one. There will be nothing in the StringTokenizer left for any of the other (21x7)-1=146 array elements. At the end of all the loops, the very first element in the array (flights[0][0]) should contain the last token in the file.
At the end, you only print the first element (i=0, j=0, println(flight[ i][j])) which explains why you see the last element from the file.
I'm assuming you have a file with 21 lines, each of which has 7 items on the line. Here is some pseudo-code to help you out:
count the lines
reset the file
create a 2d array with the first dimension set to the number of lines.
int i = 0;
while (read a line) {
Tokenize the line;
count the tokens;
create an array whose size is the number of tokens;
stuff the tokens into the array;
set flights[i++] to this array;
}

Problem in line items(text elements printing) in smartform

Hi all
Here iam printing line item data in invoice form
around 7 fields(text elements) iam having the fileds are displaying one by one
I need to diplay all 7 fields one after another with some gaps in the same line
can u please let me know how to do it with text elements
thank you

Hi,
create a table. In once line type(Line type 1) create 7 different cells (Columns) for a single row.
For eg:
Line typ1 : cell1 cell2 cell3 cell4 cell5 cell6 cell 7.
cell1 : &mara-matnr&
cell2 : &mara-ersda&.
like soon in 7 different cells.
Br,
Laxmi.

Photoshop Elements Printing Pictures

How do I print several pictures on a sheet of paper each of which is a different size? I find that I get squeezed into the size presets in the dialogue box. I have looked all over to no avail.

If you're going to be doing many prints of the same format you can make your own templates for use with the Picture Package (although you don't state which version of Elements you have).
Take a look at the 'readme.txt' file in folder below - assuming you have a Windows machine.
b C:\Program Files\Adobe\Photoshop Elements 4.0\shared_assets\layouts
Colin

Element printing quality is bad vs Cannon PhotoPrint

Hello,
Canon Pro 9000 MKII
PhotoShop Element 8
When I print a photo from Element, I get a bad print no matter what setting I try.
I have the plug Easy PhotoPrint Pro installed but it does not help. May be it is the problem?
When I print the same photo from the Cannon Easy PhotoPrint EX, I get a perfect print.
I would like to use Organiser to print rather to have to browse from another piece of software.
Any Idea? Thanks. Philippe

Mnoiz wrote:
*What do you mean by "printing"? Recording all tracks to one track in Logic
Hi Mnoiz,
What is the difference between bouncing and 'printing' to you?
iTunes - Logic - finder preview? same speakers? same room? car stereo? In iTunes
Nobody here can smell your skill level or knowledge or your workflow - these questions are all quite legit.
regards, Erik.

Anyone had trouble with photoshop elements printing to wrong printer when you have lots of printers connected (windows 7)

I have a number of printers connected to one computer via USB/Network
Epson 9600
Epson 7800
Epson 1500
Canon Pro MkII
HP laserjet 4650
regardless of what printer is selected it tries to print to the epson 9600
Originally this started happening on PSE12, so i thought it maybe fixed in upgrade so i bought PSE13, and performed a fresh install - no difference.
so i used a new harddrive, reinstalled windows and then PSE13, it was ok for a few weeks, but now its done the same again
Ive just downloaded the CC trial of "photography" and at present this seems to be working fine.
Anyone have any ideas what may cause this to happen??

ianknight72 wrote:
I have a number of printers connected to one computer via USB/Network
Suggest as a test to connect one of the printers to USB port on your computer. See what happens when it is out of the network.

Photoshop elements printing problem

every time I try to print an image the print options revert back to a print size etc that I was using earlier. Can't a new size and option such as borderless that I used for the last print stay and be used for multiple prints.

I don't get the math here. What is " 4x6 expanded to the full 11 inch side of the paper" ?
Your paper stock is 81/2x11. ok.
What is the size of the image, in inches, and the resolution in px/in? You can see the values in Image>resize>image size. Don't do anything here, just read the numbers and report back.
Thank you.

Custom resizing images when printing in Elements 11

Hi friends .... I could use some help ... When I was using an older Photoshop version ...I could select "print with preview" and there I could adjust the size and proportion of the image to the paper size - I would see the paper in a preview box and could adjust the image by sliding the box at the corner points and size the image any way I wanted ... and could see the actual preview of how the image could fit on the paper .... in Elements 11 - even if I do a PDF and print in Preview- there's no way I can see to do that ... I only see options for set sizes- even under the custom sizing menu ... I'm using exactly the same printer that I used with Photoshop - so I'm assuming this is a limitation with Elements ... I don't even see the option in Elements printing to change the image percentage as I've been used to with any other page setup before .... Please give any advice - this is making printing exactly what I want pure guesswork and is very difficult for me ...there must be something I'm missing when I print with Elements 11 .... thanks for any help ...
David

Oh yes it has Barbara. David is right. Have a look at Elements 5. I got that free and would still be using it if I hadn't had to upgraded to Windows 7. I've now had to buy Elements 11 because Elements 5 wouldn't load and Elements 11 does not have that fascility that David laments. I used that printing option almost exclusively for printing cards and I bitterly regret not having it now. I'm very disappointed with these printing options in Elements 11. The problem is that Photoshop eminates from the one country in 180 that seems manacled to its imperial measurements that the rest of the world has to keep wading through. I expect that to acquire my favourite printing fascility I shall have to get the full verson. I have seen it in screenshots, so I know that it is there. It's all very well for Barbara to say resize before entering the print window but this is just trial and error and takes forever. In the meantime I shall continue to spend ages working round this cumbersome resizing problem each time I print my cards.

Photoshop elements 12 prints asymmetical borders instead of borderless photo

Photoshop elements prints asymetrical borders on the sides of photos I am trying to print. I have printed several (more than 20) photos with no borders with no problem, when suddenly I began getting photos with asymetical borders on the sides of the printed photo. It looks fine in print preview but prints with these borders. I have printed a photo with another program and this does not happen. I have checked my settings and nothing appears to have changed. I really need help with this.

rwr2 wrote:
I have checked my settings and nothing appears to have changed. I really need help with this.
In the print dialog, under "Select Paper Size", check again to be sure that the borderless option for your paper stock is selected.
Are the picture files accurately sized/cropped to conform to the paper size, e.g.. 4x6 image for 4x6 paper?

Printing problem with Canon LBP3370

I'm having an issue relating to the Canon LBP3370.
I also notice that Canon Europe seem to have removed all trace of any MacOSX drivers from the support page for this printer.
I have an 'early' MBP running 10.6.6 w/ Suitcase3, QXP8.5 and CS5.
Just bought a MacMini updated to 10.6.7. Same software. Same files. Same fonts.
I have one file which gets printed weekly from a template in QXP. It prints fine on the MBP on a Canon LBP3370 using the last 'auto updated' driver. Not sure how to check the version number of the driver, but it works. I looked in 'About this Mac' and looked up the printer, and it says driver version is 2.0 - then again, it says the same for the version on the MacMini, which was installed today using an installer marked 2.24.
On the MacMini, the same file, on the same software yields an output error to the printer and requests the printer be switched to 'raster' mode in 'Quality' settings in order to print, which I understand yields diminished quality on more complex files.
I experimented with the file, removing elements and isolating them in another document to test if they print OK on the MacMini. 99% of all the page elements print just fine including a complex EPS without switching to 'raster' mode. All except for... wait for it... a SINGLE weight of the Adobe Helvetica Neue LT Std OpenType font. The document has about seven separate weights of the same font in use, and it is only one of them that triggers this problem.
I've scanned the font completely for errors and corruption and it gets a clean bill of health. The exact same font, on the MBP, using the same software and the same printer, but used on 10.6.6 prints perfectly without having to switch to raster mode.
Bizarre.
What actually is the difference between UFR and Raster modes anyway? How do I fix this? It seems more likely to be a 10.6.7 issue than a Canon driver issue specifically... I notice the webs full of people commenting on 10.6.7 causing problems with OpenType fonts.
Any ideas?

sig
Not really, thanks anyway. I'm already on a later driver than that.
PAHU
Thanks for the input. I'm still somewhat confused by the aparrent existence of two different problems - first the sheer number of complaints that 10.6.7 in itself has broken a good deal of OpenType font functionality, particularly in the PostScript flavour, and second that users have been having similar specific problems with this exact printer which appears to be a result of a driver in need of fixing.
I'm not sure which option to place my bet on, or whether indeed the two are, in fact, connected and the development of the 2.24 and later drivers are in essence 'fixes' for the 'breakage' introduced by 10.6.7 in general.
The part that confuses me most is that it is a single weight out of five weights of the same font used in the same document which causes the problem. Part of me says that the solution is to just abandon that specific weight, but then another part of me says that I'm managing some three thousand faces on this system, any of which could need to be used, and I cannot test all of them to disable or deactivate the weights (or families) which might cause issues.
Can you point me in the direction of a clean, pure source of 2.24 for UK English, which I cannot find on the Canon Europe website at all (certainly on the UK site, all Mac drivers for this model appear to have been discontinued and removed from the site, even though the vestigial tech notes for the printer still on display on the product page state that MacOSX is supported). I'm prepared to try a reinstall from a fresh source to see if it shifts the problem. Otherwise, as you say, it would appear that another 'bug' has been found which the attempted fix has not cleared.

Printing a pdf document created in Acrobat Pro 9.0

Solved the problem of printing a pdf document created using Acrobat Pro 9.0 with SL - tried many different things form adobe etc and by accident discovered while in Acrobat you have to select ADVANCED in Print then click onto SAVE AS IMAGE in next box and then OK and all prints as it should. Just thought others may want to know this if they have had problems 1

I'm reviewing your post and while I see a fix, I can't locate the problem that you may have originally posted. Since I'm having issues, I'm hoping your's were the same.
Sometimes when I print an Adobe Acrobat 9.0 document, most of the printed word fail to print out (although they are in the PDF document). Almost all graphical elements print and the occasional line of text--but most text is missing. Was ti your issue?
Thanks.

Unable to print in PSE13 using windows 8.1

I am running windows 8.1 and whenever I try to print in PSE13 I receive an error message about not enough memory on my external board. What does this mean and how do I resolve this? My printer is a Canon MG6320 and there is nothing in the print queue when I try to print. If I open up other programs, I am able to print just fine.

Hi ,
Go to Help menu >> update
it will update your application to 13.1
then go to Editor 's Edit menu >> Preferences and click on Reset Preference on next launch .
after that relaunch your application..
Refer article for the same:
https://helpx.adobe.com/photoshop-elements/kb/elements-printer-issue-incompatible-error.ht ml

Pdf files print incorrectly with 10.1.7 update

I upgraded to the 10.1.7 Acrobat update a few days ago. Now when I print pdf files all the text prints as a solid garbled mass of compressed overlapping characters. Graphic elements print fine. I'm running CS5.5 on OSX 10.6.8 and printing on an Espson Stylus Photo 2200.
I've never had any problems printing pdf files prior to this. Is this a bug with the 10.1.7 update, or is it an incompatibility with my printer driver? For now I will have to go back and restore to a previous version of Acrobat in order to print.
Has anyone else had this experience or know how to fix it?

As a temporary measure you can try print as image. Since this happens on all pdf files, you can try re-instaling your printer driver and see if that helps.

Composite prints screened - even black!

When printing in CS3 (Intel Mac) with composite gray settings to my ImageSetter, all items are screened, including 100% black items. In CS2, this does not happen.
I need to make film positive proofs for clients. They obviously do not want the additional cost for a separate positive for each color, but rather want all colors on one piece of film. In CS2, I just print "composite gray" and all elements print together as expected. I also could alias all the spot colors to black to get solids in the film. Elements that were not spots would be screened which is OK. Now, with CS3, ALL elements are screened. Whether 100% black, a spot color aliased to black, or non-spot colors.
I have had both programs opened side-by-side to ensure all the settings are the same (preferences, color management, etc...)
The problem occurs with all files(CS, CS2, CS3) and all element types (tif, eps, pdf, text, strokes, etc..) within the files.
I am so tired of having to export CS3 files to Interchange and then print from CS2.

Set your Appearance of Black>Printing/Exporting preference to Output All Blacks as Rich Black. You will have to alias spot colors to Black if you want them to print solid otherwise they are simply being converted to grayscale.

PS Elements 10 printing

Similar Messages

Maybe you are looking for