Ps Elements 6 - Editor not working

Greetings.
First, I want to describe my frustration. I've been surfing Abode's site for more than 60 minutes trying to figure out how to access the contact support, by email rather than phone. It's very  common for any manufacturer to have an email contact customer support. After more than an hour I figured out that the forums are the way used here. But the site's support instructions don't explain that at all.
The site provides a lot of buttons and support options that are all useless for issues that require contact, those that the knowledge base is not likely to cover. "Online Help" option in PsE's support page redirects me to a guide page that looks like a user manual, that's not what I need at all to solve the problem I have got. The other elements on the page are written common issues without a contact support option. The "Contact Adobe" page contains 2 scroll down menus for problem definition, but they weirdly do not open any contact form. There is a phone support number but it's irrelevant. The instructions below the 2 scroll down menus suggest going to the "Adobe support programs" page which leads to the PoE support page I was talking about. The final option in the contact page is this:
"For faster service:
You must register your software to get product support. Register now"
But dumbly, when I try to register my product it refuses reporting back that my product is already registered. Okay, what next? There is nothing left to do at the page!
Okay, here is the issue. I have installed PhotoShop Elements 6 from a disc that came with my Genius graphics tablet (does this make any sense?). Using Windows 7. The system requirements are doubtlessly met. The video card is ATI Radeon HD 5770. The program was installed properly. When I run it and choose the Editor, PhotoShop refuses to run it, and this error message pops up:
What does this mean? What other information do I need to provide in order to solve the problem? And who should I contact? Will it be solved here in this forum?

Done, no difference.
And here's an important detail: I've also tried installing PSE 8 and the same error occurred, so it's obviously not a compatibility issue.
I also tried the solutions provided in the help knowledge base concerning the same error, for PSE4 and CS2. But no use at all. The support staff didn't help me by anything other than suggesting the use of the knowledge base.
I did not comment on this thread since about a month, because I was busy with school during that time. I finished now and I'm ready to seek a solution for this problem!

Similar Messages

  • PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

    PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

    Thanks for the quick response ...
    I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
    I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
    Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

  • Photoshop Elements 12 Editor not working after Registration

    After installing & registering my Adobe Photoshop Elements 12, a week or so has passed since I last played with it. The Organizer still works fine, but the Editor sends me to a registration screen, which ultimately ends up telling me to ensure the Internet is working (it is) or retry. Any idea what's up? I've tried restarting the computer, uninstalling/re-installing the software, and the ever popular, waited on the phone for 45 minutes until I got so tired of the music (no one ever picked up) that I just gave up. Thank You for Your Support!

    Please share a screenshot of the erro message you are seeing when launching Editor?
    Thanks
    Andaleeb

  • PHOTOSHOP ELEMENTS 12 EDITOR NOT WORKING

    THE EDITOR HAS SUDDENLY STOPPED WORKING ON MY ELEMENTS 12.    ALL I KEEP GETTING IS " PHOTOSHOP EDITOR HAS STOPPED WORKING, WINDOWS WILL CLOSE THE PROGRAM AND INFORM YOU IF IT FINDS A SOLUTION ".      WE ALL KNOW THAT WINDOWS NEVER FINDS A. SOLUTION FOR ANYTHING.   PLEASE HELP.

    Please share a screenshot of the erro message you are seeing when launching Editor?
    Thanks
    Andaleeb

  • Photoshop Elements 11 Editor not working

    Everytime i try to open photoshop editor i get a message saying stopped working i need help please

    You won't lose any photos or catalogs by reinstalling (there's no repair install). However, before you do that, try restarting the editor while holding down ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

  • I am in Elements 12 - and I cannot open the Editor  - it says elements editor not working - any suggestionjs?

    Has anyone experienced Editor not working - and got an answer from Adobe?

    Try this DNS ...
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Quit and relaunch Safari to test.
    ***   When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

    My serial number for adobe photoshop elements 12 and premiere elements 12 does not work.  On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9.  I have purchased those products in the past, but just recently upgraded to elements 12.  I can use the the photoshop organizer, but can't open the photoshop editor.

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • Scroll bar on editor not working

    I recently upgraded to phtoshop elments 11.0 to 13.0
    In the editor mode I cannot use the scroll bar. The scroll bar works fine in the orgnizaer mode. I have tried three different mouses and there is no difference.
    Tom Fitch, San Antonio Texas

    I am using Windows 7 Professional
    In the organizer portion the scroll bar moves. When I put my  mouse or
    arrow on the scroll bar and drag it then of course I move through the  different
    rows of folders or rows of pictures once in the photo  bin.
    It was doing it with Photoshop Elements 11.0 and I thought  13.0 might fix
    the problem and the scroll bar did move on the first try but not  since then.
    When I try and load the photo bin and I am choosing the right  folder to
    load the scroll bar just does not move. I can select the right folder  by
    using my up and down arrow or the page up and down and then click on the  right
    folder and then it loads.
    Once I get the right folder of pictures loaded and  once I finish the first
    row of pictures I cannot use my mouse and  arrow to drag the scroll bar
    down to get to the next row of pictures. I can  place my arrow on my mouse
    below the scroll bar and got to the next row but I  usually get only half the
    picture and sometimes only 1/4 of it but I can usually  get it loaded up and
    edit the pictures and move on the next picture but it is  very slow and
    frustrating.
    Any help would be appreciated.
    I protested to an adobe supervisor and I got an e-mail and  somebody is
    supposed to call me tomorrow so hopefully then can log on to my  computer and
    see what I am talking about.
    Sound like something got corruped in the editor mode only. I  tried 3
    different mouses and even the computer mouse and no  difference.
    Tom Fitch
    In a message dated 12/17/2014 5:05:37 P.M. Central Standard Time, 
    [email protected] writes:
    scroll  bar on editor not working
    created  by RKelly_ (https://forums.adobe.com/people/R_Kelly)  in 
    Photoshop Elements - View the full  discussion
    (https://forums.adobe.com/message/7024909#7024909)

  • Premiere elements 11- PitchShifter not working?

    Pitch shifter in Premiere elements 11 is not working as good as it was in Premiere elements 7. Here's some of my issues:
    When I change the pitch, the end of the audio is cut off/out of sync
    When a clip is short, the audio won't play if it has the pitch shifter effect
    When I split a clip with pitch shifter applied, the audio skips
    I would like it if the pitchshifter would be more like the one that was in premiere elements 7.

    Two questions... does your project match your video?
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    And, just what are you editing?
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Adobe Photoshop Elements 12 does not work with Yosemite 10.10

    My Adobe Photoshop Elements 12 does not work with Yosemite 10.10 nor does my Premier Elements 12. When I try to start them up I get the error message. After uninstalling and reinstalling a few times its still the same. Strangely enough PSE 11 seem to work with Yosemite.  I uninstalled my Premier Elements as well and it behave the same way. How do I get a new copy of Premier Elements 12 to reinstall?

    Just to further test what is happening to my iMac on Yosemite is I downloaded the trial version of Photoshop CC and when I go to launch it it gives mr the same error message as when I try to launch PES 12 or Premier Elements 12. So whatever the problem is it involves all three and so upgrading to Photoshop CC doesn't even help.  Could there be an Adobe file damaged or missing somewhere that is common to these and yet does not effect Revel and Lightroom?

  • Adobe Photoshop elements 10 Editor not showing under application support;adobe

    Adobe Photoshop elements 10 Editor not showing under application support;adobe on a MAC.  I would like to add actions in photo effects but can't add like instructios say because it is not in adobe.

    SSharpPhotography I would recommend posting your inquiry to the Photoshop Elements forum.

  • Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

    Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • Graphical editor not working

    Hi,
    SAP Graphical editor not working.  I am getting the following error.
    EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Last week its sucessfully working but suddenly happen this issue... This problem in development server only. In production server is sucessfully working.
    Please advise...
    Regards
    Rajesh.

    Hi Rajesh,
    It looks to be RFC connection issue.
    Refer to various solutions described in below SAP note
    101971 - 37527 Graphical full screen is not available (RFC)
    Alternative
    Workaround
    You can prevent the termination of the RFC connection by increasing the value of the timeout parameter for the relevant RFC destination. Call transaction SM59, choose the TCP/IP connection "EU_SCRP_WN32" and branch to the "Special Options" tab page. In the section "Keep-Alive-Timeout" select the option "Specify Timeout" and enter a longer wait time (for example, 300 seconds). Undo this change once you use the corrected program version.
    Hope this helps.
    Regards,
    Deepak Kori

  • Redemption code for Adobe photoshop/premiere elements 11 does not work

    redemption code for Adobe photoshop/premiere elements 11 does not work

    I am having the same issue except that my premiere elements code worked great, but the photoshop elements key failed. Ugh.

  • Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?

    Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.

    Perhaps some of the tiffs are already layers.
    In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
    support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
    For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
    On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon

Maybe you are looking for

  • 11gR2 clusterware installation problem on root.sh script on second node

    Hi all, I wanna install the *11gR2 RAC* on ORA-Linux 5.5 (x86_64) using VMware server but on the second node i get two "*failed*" at the end of root.sh script. After that i try to install DB but ı can see only one node.What is the problem... I will s

  • How can i add a new album on my ipad2 without ios5

    Im stuck

  • Help! Can't open psd file

    I've been working on a large file for a while. I've been using the same computer with CS2. Now, the same computer, won't open the file I've been working on. The file has never been worked on using a different computer or a different version of Photos

  • Limewire/Azurius Java problem.

    Now the above 2 programs require java 1.5... The problem that i have is that after 10 to 15mins of downloading anything using the above 2 programs... my computer and the net freezes..... first the the download speed goes down to 0kbps........ then if

  • Epson C86 won't print

    I was running low on ink (both black and colors) in my C86, so I changed out all 4 cartridges yesterday. Now when I attempt to print, the printer goes through all the motions, but produces nothing but blank pages. I've cleaned the print heads several