PS has given up waiting for an assessment of the graphics display driver?

I replaced my graphics card because it was not supported and  some PS CC graphics functionality (smart sharpening, etc) wouldnot operate. I purchased and installed a new Gigabyte AMD HD7770 as per the list of supported cards. The latest drivers have been installed. (Windows 7 64bit)
I am now getting a message "PS has given up waiting for an assessment of the graphics display driver. Enhancements that use the graphics hardware have been disabled. Check the manufacturer's website site for the latest software."
What is happening? Why am I paying for features that I cannot access despite having gone to the expense of purchasing a new card and following the PS CC requirements to the letter?
This is very frustrating and annoying.
Addendum: I am now getting a message that 3D requires a minimium of 512Mb of vRAM. However, my new card is 1 GB......?????????
Can someone provide a solution for this problem please?

The best thing to do is to go into Help > System Info, copy and paste the contents into your reply.
One of us or several should be able to sort it out for you.
Gene

Similar Messages

  • When open photoshop a message came up saying photoshop has given up waiting for assesment of the display driver. enhancements that use the graphics hardware have been disabled... can anyone help?

    when open photoshop a message came up saying photoshop has given up waiting for assesment of the display driver. enhancements that use the graphics hardware have been disabled... can anyone help?

    The best thing to do is to go into Help > System Info, copy and paste the contents into your reply.
    One of us or several should be able to sort it out for you.
    Gene

  • I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

    I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

    with a little patience - people all over the world are downloading mavericks.
    alternatively you could restart your computer and try again

  • Ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.

    ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.

    same problem here

  • How LONG I'll need to wait for Apple GENIUS fix the incompatibility

    I need to work....How LONG I'll need to wait for Apple GENIUS fix the incompatibility # KEYNOTE and LION???
    What is the best thing I've to do???
    Downgrade the OS??? Change the Plataform????

    Each region has little differences that need to be changed and setup in order for it to work on your phone correctly. Just need to sit and wait...
    Nokia 5800 XpressMusic Red V52.0.007
    Hit the Kudos if I helped!

  • HT1725 When I download a song from iTunes into my library, it often says it has downloaded, charges me for it, and on the song in my library shows the full playing time. However, when I play the song, at around halfway through it skips to the next song?

    When I download a song from iTunes into my library, it often says it has downloaded, charges me for it, and on the song in my library shows the full playing time. However, when I play the song, at around halfway through it skips to the next song?
    i'm just wondering:
    a) why it does this
    and b) how to stop it doing this, because it still charges me for the song :/

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • How can I get my ipod nano (6th gen) to stop making a static-y noise when I try to listen to my music? It has been doing this for a week and the music is faint while the static is louder than it.

    It has been doing this for a week and the music is faint while the static is louder than it. I try plugging it in to my iTunes and when I un-plug it, it still makes the loud static noise. I have also tried tapping my knuckle on the back of my ipod nano. This has not damaged it at all nor caused this to my ipod. There is no water damage to the ipod. Only a few scratches from a couple drops. The drops have been on concrete but not at a very high distance. How to I stop this? Do I need to replace my ipod instead?

    Have you tried a different pair of earbuds/headphones to rule out a pair of damaged/faulty ones?  You might also want to make sure the headphones are securely and firmly seated in Nano's headphone jack.  Lastly, check the headphone jack for any signs of debris or damage.  You may need to have the headphone jack replaced either by Apple or a third party repair company.
    I assume this static is present on any track you listen to versus only particular ones?
    B-rock

  • [svn:fx-trunk] 11548: MXFTEText. css now has a type selector for FTEDataGridItemRenderer that matches the one for DataGridItemRenderer in the MX default .css file.

    Revision: 11548
    Author:   [email protected]
    Date:     2009-11-06 16:35:27 -0800 (Fri, 06 Nov 2009)
    Log Message:
    MXFTEText.css now has a type selector for FTEDataGridItemRenderer that matches the one for DataGridItemRenderer in the MX default.css file. Both set paddingLeft to 5.
    QE notes: None
    Doc notes: None
    Bugs: SDK_22741
    Reviewer: Alex
    Tests run: ant checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/MXFTEText.css
        flex/sdk/trunk/frameworks/spark-manifest.xml

    AN UPDATE ON MY ISSUE:
    It appears to be limited to Dreamweaver. When I upload the files to my server and use BrowserLab or Microsoft SuperPreview the pages are rendering properly in all versions of IE. It's only broken when viewing in Design view within Dreamweaver or when using BrowserLab from within Dreamweaver. So at least I know my website works, which is a huge relief, but does anyone have any idea why Design view would complete ignore my styles? It's very annoying.

  • Lion in the app store I bought, now he is waiting for 12 hours in the dock on

    lion in the app store I bought, now he is waiting for 12 hours in the dock on is this normal?

    Go to appstore > purchases > does it say install?
    If so, go install it
    Enjoy!

  • I have snow leopard, 10.6.8 on my mac pro.  would it make sense to wait for mountain lion in the summer vice upgrading to Lion then mountaion lion?

    i have snow leopard, 10.6.8 on my mac pro.  would it make sense to wait for mountain lion in the summer vice upgrading to Lion then mountaion lion?

    Nobody can tell you that.  We don't yet know what the pricing will be or what kind of compatibility issues may arise.  If you don't need anything in Lion right now, you can certainly wait, and if you do find the features of Lion compelling, there's no reason to wait for 6 months.  Buy what you need when you need it, and don't worry so much about what's ahead...  there's always something new coming soon!

  • HT5639 unable to pair my iphone 4s to my mac using bluetooth been to apple store who have told me there is a clitch and to wait for undates to cure the problem ?

    unable to pair my iphone 4s to my mac using bluetooth been to apple store who have told me there is a clitch and to wait for undates to cure the problem ?

    I have my iPhone 4S paired with my macbook retina, so hexonxonx's reply is incorrect.
    After you pair your phone and your computer, go into network preferences on your computer. Click the bluetooth pan, check that you see your phone and click connect.
    That worked for me.
    If I click connect from the phone it tells me that my retina mbp isn't compatible and it forces me to forget this device. If this happens just repair it...
    Good luck

  • HT201210 my iphone5 is stuck at the i tunes logo whenever i try to restore it the iphone reboots at the waiting for iphone stage and the i tunes logo appears againe

    my iphone5 is stuck at the i tunes logo whenever i try to restore it the iphone reboots at the waiting for iphone stage and the i tunes logo appears againe

    Water damage is really a tough hurdle to get over if the steps you have already tried do not work.
    The next step would be to tranfer your Logic Board to a working 3GS to see if it works.
    If the Logic Board is good or you just want to try one more thing, try cleaning the Dock Port very well with Isopropyll Alcohol. If still problem, at most replace the Dock Port Assembly.
    Throwing good money after a bad iPhone is not a good idea.

  • CCP related: A timeout occured waiting for a response from the ECU

    Hello All,
                I had just started using ECU Calibration tool kit software. Iam using USB 8473 for my application.When I tried to run the VI after loading the *.A2L file, I see an error message saying "A timeout occured waiting for a response from the ECU ". Does anyone know how to communicate with the ECU through CCP.
            Iam pretty sure that Iam using the right cable. I also checked the address of the parameters using Get property.vi what iam trying to read, wether they are matching with the address in the *.A2L file or not.They are matching. However I was able to communicate with my ECU when I use the same device to read the data over J1939 data link, based on arbitration ID's, with the Vi's from CAN Frame to Channel Conversion Library.
        Can any pls help me out how to communicate with my ECU using CAN Calibration Toolkit software.
    -Lucky.

    Hello,
              I am sending you an attachment of the manual for the ECU Calibration tool kit . Please go through the manual it will clarify your doubt. Moreover , check for can vi's in the example finder in labVIEW. Those will help ....
    I am sending you a link which gives you some insight about the installation of  CCP command set and the use of the toolkit with the USB CAN hardware.
    http://digital.ni.com/softlib.nsf/websearch/D7DE248D07CAD00086256ED3004BAB8A?opendocument&node=13206...
    Drivers and Updates: ECU Measurement and Calibration Toolkit 2.1
    Attachments:
    can manual.pdf ‏1437 KB

  • My ipod touch wouldn't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and an empty loading bar.

    My ipod touch wouln't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and and an empty loading bar. Please help. Thank you.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Hi I was using whatsapp on my iPhone5.I was not able go to the main menu by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black

    I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?

    Hello monicaa003,
    Thanks for participating in the Apple Support Communities.
    If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
    For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
    About Siri - Apple Support
    If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Best Regards,
    Jeremy

Maybe you are looking for

  • Razr Maxx no longer able to take screen shots

    Hi all, I've had a ton of trouble with the Razr Maxx. I've been through a few of the phones. First ICS update killed the phone, I've consistently had a Maxx that won't hold 4g connection in strong 4g areas and requires it to be put into airplane mode

  • Errors setting up DataGuard Broker

    Hi, I'm setting up Data Guard Broker and get these errors, hope you can help. My Primary (orcl) is in open state and Standby (orcldg) is in open read only state. I've run these on both of my 2 node primary RAC dgmgrl connect sys create configuration

  • Mac Book OSX 10..4 Memory

    I just bouhgt a Mac Book 1.83GHZ Duo Core with 60G of memory... However I only show 34G left. Did Apple install that much software to warrant using up 25G of memory..?

  • Server awareness in Java Scheduler job - or - Where Am I?

    What's the best way for me to make the Java Scheduler tell me what server it is running on? My application logic requires this information to create valid links in E-mail messages. The environment changes, of course, as my application navigates from

  • Query to get which user assign to what group in OID

    Hi All, Can you please help me out to get the details of users assigned to which groups in OID. I required sql query for the same. Please suggest for such query. Thanks- P