PS report does not equal to asset balance report

Hi SAP Gurus,
We have this problem where PS report S_ALR_87013557 is showing higher amount than the Asset Balances report S_ALR_87011964.
Have checked on the transactions and found out that some postings are not yet settled to asset that is why the amount is different. However, there are instances that settlement has been done to Asset but it did not reflect to Asset Balances report. Is there a way or report so that I can further check on discrepancy?
Also, is there any existing report where I can view all postings made to WBS element or even project definition?
Thanks in advance.

Hi Ahmed,
Thanks for your response.
Receiver in settlement rule is fixed asset, but some did not have WBS in asset master, maybe this is the reason.
Have checked report S_ALR_87013558, though I'm not sure what is Commitment column all about?
Can any one help the purpose of the commitment column and in what scenario it will reflect to actual column?
Appreciate any inputs on this. Thank you.

Similar Messages

KE5Z drilldown report does not equal grr3 report values

Hello,
We have a grr3 report where the COGS line is based on functional area and account ranges. The total displayed on the GRR3 report for the COGS cell matches the values I would expect based on the specified account and functional area restrictions assigned to that cell. When I drill into the KE5Z report (Profit Center: Actual Line Items), which is identified as a receiver report, the summed value of the "In Company Code Currency" field does not equal what is displayed in GRR3. The GRR3 report is returning results in the same currency as the company code currency that the report is being executed for so that is not the problem. During my investigation it looks like the functional area restrictions are not being accounted for when I drill into KE5Z. Any recommendations on why the restrictions identified for the cell in the GRR3 report would not be carried through to the KE5Z results? I have been playing with this for hours and have run out of ideas. I can't determine why the COGS cell value is different than the actual line items sum. Any help would be greatly appreciated.
Thanks,
Jordan

Hi Jordan,
in my experience the report-report interface can only pass through selections independently.
To give an example: I had a report painter report with line 1 that had a selection on two characteristics (say cost element A and cost center B) then a second line with selection cost element C and cost center D selected and finally a line with the sum of the two lines above.
Now when I jump to a connected line item report by double-clicking on the line with the sum, the parameters passed on are:
cost centers: B, D
cost element: A, C
Therefore, the sum of my line items is not equal to the sum that I departed from, as I get line items with cost element A and cost center D, for example, a combination that was excluded from my original report.
I hope I made the point clear.
Another possibility is of course, that the receiving report has additional selection active (in the form used in the dril down report) that were not present in the original report
Regards
Nikolas
Edited by: Nikolas John on Mar 24, 2011 9:21 AM

Account total balance does not equal line item balance

Hi,
I find one account total balance diff with its line item balance? What could be the reason?
Thanks

I have seen this before in an account which was designated as a retained earnings account - prior year rolls into the account are not a posting in the conventional sense.
Hope this helps!
Regards
Louise

Assets balance Report(T Cd s_alr_87011964) Not Tally with GL Code in FBL3N

Hi Friends
SAP Standard Assets balance Report(T Code s_alr_87011964 and s_alr_87011963 ) Not Tally with GL Code in FBL3N.
In SAP report coming with Report Date but FBL3N coming with Posting Date
So How I add Posting Date input parameter in Sap Standard Report. Please help me
Thanks & Regards,
Hemant Kumar

Hi Vinod,
I hoe that you are doing reconcilation between Asset ledger & FI ledgers. Before that just run ABST ,there u can findout whatever the documents not assigned to FI.
Asset is subledger to GL.It is automatically updated through determination,while post GRN to capital goods.In somecases bsuiness remove the reconcilation acount and do some adjustments that time that report not match with FBL3N.
You can run ABST then u can get details
Best rgds
Mani

SAP P & L Report does not balance to Balance sheet profit

Dear support,
I have a client that we have just taken over and they have a strange problem with their financial reports. The profit on the P & L Report does not balance to the profit on the balance sheet? The trial balance still balances so I am not sure whee the difference is coming from??
It has not balanced since the first take on balance were brought int othe system. Is it possible that some account with balances were moved from a P & L draw to a Balance sheet draw in the chart of accounts? If so how do I find the problem account?
Regards
Clayton

I resolved this issue myself.

Asset Balances report to include retired assets

We added custom fields into the standard Asset Balances report (AR01). It works fine as it shows the real time asset balances. But the report does not include retired/sold assets.
Can the selection parameters of Asset Balances be changed to include assets that have been sold/retired (ANEK-TCode: ABAON)?

Run the report in the past or sellect other AM non BALANCES reports.

Asset balance report Vendor/supplier wise

Dear All,
I want to take asset balances report vendor/ supplier wise.
Is any report avaliable like this?
Thanks & Regards,
Pritam

Hi,
you can use sort variants which contain the vendor information. You can find some information in SAP notes 98739 and 546856.
Regards,
Markus

Asset balances report S_ALR_87011963....

Hi Gurus!
When using transactions S_ALR_87011963 to S_ALR_87011970 asset balances report date must be the last day of the fiscal year when is closed or not yet open as you know.
Is it possible to override this?. I mean if it is possible to have a report of any period of any fiscal year without restriction using this transaction?.
If not so, could you tell me the necessary table or tables available to have a query that works in that way?.
Thanks in advance!
Regards
Tristán Bergaz

Hi Raja
Have you run T-code AFAR (recalculate depreciation ) for that asset?
Please let me know
Thanks
Sanjeev

Asset Balances Report

Dear All,
In the asset balances report listed below, how can I show the cost center in the report itself.
S_ALR_87011963 - ... by Asset Number
S_ALR_87011964 - ... by Asset Class
S_ALR_87011965 - ... by Business Area
S_ALR_87011966 - ... by Cost Center
S_ALR_87011967 - ... by Plant
S_ALR_87011968 - ... by Location
S_ALR_87011969 - ... by Asset Super Number
S_ALR_87011970 - ... by Worklist
I tried to execute the reports but when you change the layout the cost center column/set is not available in the list.
But if you check the asset master data in AS03, the cost center field was indicated under the time-dependent tab.
Kindly advise on how I can show the cost center in these reports.
Thanks,
Ellicec

Hi Ellicec
This should help you.
http://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV
Regards

Showing Booking amount when it does not equal Opportuity Revenue Total

I there a way to create a report to easily show where the booking amount of an opportunity does not equal the sum of the products in the product revenue section? I tried Sum(Product revenue), can't quite remeber the field name, but that did not work
Also, we would like to see any opportunity that has no predict revenue associated with it, either in the same report or a different report.
Thanks

David,
The Opportunity-Product subject areas contain both Opportunity Revenue fields and Opportunit-Product Revenue fields. The Opportunity-Product Revenue field located in Columns/Opportunity-Product/Revenue/Revenue will aggregate the total amount of all products for the opportunity. There is no need to SUM this field.
Build a report and filter it based on a field that calculates the difference between the two revenue columns and you should get your desired list of opportunities.
Now that you know where the right fields are, you other report should be a simple filter on the appropriate revenue field = 0
Mike

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Custom aggregate "Apply to Open Report" does not add the item to the report

When I create a custom aggegate and click on "apply to open report", the custom aggregate does not get added to the report. The custom aggregate exists in the selector list and I can add it to the report using the selector. Why does the "apply to open report" not work and any ideas how to debug the problem?
the dversion is:
6.3.4.0.0 , Build: 71121
Thanks, Carla

Hi Carla,
Sorry to ask such a basic question, but are talking about Oracle Sales Analyzer?
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

AR aging report does not print alphabetically by customer name in 8.8

AR aging report does not print alphabetically by customer name in version 8.8.
It is possible to create a custom layout for the receivables aging summary report (to print alphabetically by BP name) to overcome this problem. However, itu2019s not possible for the u201Cdetailed receivables aging reportu201D or u201Ccustomer statement reportu201D.
Why has SAP changed this functionality? In version 2007 SAP takes the order of the rows set on the screen unless other order is specified in the layout.
How can we make the u201Cdetailed receivables aging reportu201D and u201Ccustomer statement reportu201D print alphabetically by customer name?
Steps to reproduce:
Business partners > Business partner reports > Aging > customer receivables aging
Doubleclick on customer name to sort it in alphabetical order.
Click on preview and select u201Creceivables aging summary reportu201D.
The system layouts do not print by customer name in alphabetical order.
Click on preview and select u201Cdetailed receivables aging reportu201D. The system layouts do not print by customer name in alphabetical order.
Also, customer statement report does not print by customer name in alphabetical order.
In SAP 2007 versions, when a marketing document or aging report is printed, SAP takes the order of the rows set on the screen unless other order is specified in the layout.
In SAP 8.8 although it works the same way for marketing documents, it doesnu2019t work like this for Aging reports.
I was able to change the order for the u201CReceivables Aging Summary Reportu201D only. We cannot overwrite a System report, I had to create a new layout called: u201CBusiness Partner Aging (Summary) (Alphabetically Sorted)u201D.
I couldnu2019t set up the order based on BP Name for the other 2 options: Detailed Receivables Aging Report and Customer Statement Report (One page per Customer).
Iu2019ve checked print settings and properties, and I donu2019t see any way of changing the default order for these reports.

Reported it to SAP support + they plan to fix it in a future patch.

WT reporter does not show split for tax authorities!

Dear all:
I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
Do you have any work around for this?
I would appreciate any tip or workaround on this,
Thank you!

Hi
1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
br, Ajay M

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

PS report does not equal to asset balance report

Similar Messages

Maybe you are looking for