PSA SE 3 fails to reload in same computer session!!!
hey everyone ... or those interested enuf to visit this thread :)
i have an issue:
if in the same computer session, i open this app then close it [ctrl-k, exit or X], it fails to reload a 2nd time [a process instance flashes in task manager but the instance doesn't run].
tm already shows a process instance from my 1st use of the app, if i click 'end process' it doesn't end but by 'end process' i can reload the app.
a 2nd process runs in tm for the 2nd use of the app [the number of process instances concurs with the number of times i have used the app during the same computer session].
i must click 'end process' in tm for EVERY instance before i can again reload the app [lets say i've used the app 7 times during that same computer session, then i must 'end process' the 7 instances in tm BEFORE i can open the app again [thus resulting in another process instance].
can anyone help me with this issue!??!? i've logged a bug report and i'm disgruntled to learn that i won't get a response from them!!! *salutes adobe*
i have a couple more issues [all since upgrading/updating to reader 7.5 and this app and i might have to rely on your collective heads to get it solved cos i doubt i'll get any relief from sending bug reports [after all, it could be my installation]. i have uninstalled and reinstalled a number of times to try and sort it out myself, but i am failing and i'm beginning to lose patience.
thanks and best regards
rox
:)
thank you for your reply ... i very much appreciate it *smiles again*
i've actually uninstalled the damn thing ... as i have done also with adobe reader [7.0.5 or something ... the current version anywayz] anticipating that uninstalling AND reinstalling the reader only would cure my ills ... UNFORTUNATELY, it didn't ... everytime i USE the reader, it too refuses to open if i *need* it during the same computer session AND it jams my log off/shutdown ... its another 'task manager ... end process' issue too ... methods of closing the program mess with my computer :/ ... so annoyed!!!
this situation however i will reserve for an independent [sp???] thread...
i will reply again to this once i have performed the *deletions* you have recommended for PSA SE 3 ... i think tho i need some answers regarding my *reader* issues first *scratches head*
thank you diksha for your interest and i am sure, valuable information...
rox :)))
Similar Messages
-
2960X Stack Fails After reload Command
Did not find anything in Bug Tool or these forums for this so posting as a new question.
Environment is multiple stacks of 2960X -48FPD-L switches in different IDF's running IOS 15.0(2)EX5. They were installed new and configured by another party about one month ago. Current configuration is attached to this post.
Switch stack fails to rebuild/sync after CLI reload command via telnet session. IP stack appears to not initialize so no network connectivity comes up even though per the onsite staff the master switch system LED's are green and one of the uplinks is connected to that switch..
The system LED's of the other switches are amber.
Remedy for the time being is for someone onsite to power cycle all the switches in 20 second master reelection window.
Have not yet had opportunity to go onsite to console into one of the master switches to reload and monitor the process from that perspetive.
One telltale that makes me wonder about EX5 is the reload command as documented in the 15.0(2)EX Switch Manager command reference here:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/stack_manager/command_reference/b_stck_152ex_2960-x_cr/b_stck_152ex_2960-x_cr_chapter_01.html#wp3486313748
should prompt with,
"Proceed to reload the whole Stack? [confirm]"
but actually only prompts with,
"Proceed with reload? [confirm]"
as if the command was 'reload slot 1' instead of just 'reload'.
I have not found anything in the config missing/wrong as far as configuration of the stack is concerned other than priorities and ID's were all assigned automatically/default..
If EX5 is the issue I'm not keen on downgrading to EX3 because the uplinks are SFP-10G-LRM which had more issues with EX3 than with EX5.
Thanks in advance for your time.
JonHave you tried cold booting the switch. I know it is a horrible work around, but I ran circles around this problem on a switch I had upgraded (well- downgraded) from 15.2(3)E that was hitting this bug. Warm boots seemed to do nothing to clear the %ILET-1-AUTHENTICATION_FAIL: This switch may note have been manufactured by Cisco (so on so forth). Once I pulled the power cable from the switch and waited several seconds prior to reapplying power, the switch came up cleanly. Currently, Cisco has safe harbored 15.0(2a)EX5. Did you happen to catch which bootloader combos with 15.0(2a)EX5 seemed to have the most consistent problems with this bug? The campus I work at is currently in the process of rolling out about 120 of these switches and originally decided to stick with 15.0(2)EX5 until we hit an OIR with SFPs that TAC almost immediately acknowledged as a new development for that specific image. We as a group decided to try out 15.2(3)E and quickly found out that the bug still existed. By that point, TAC was aware of the problem and over the weekend (2 days time after opening the ticket on a Friday if I remember right), 15.0(2a)EX5 was released.
Here is a small sampling of the switches that we have rolled out and what their bootloader + running IOS is. Note: There are a few "stable" cases running 15.2(3)E, but they will be rolled back during maintenance windows in the next few weeks. Everything that has been deployed since 15.0(2a)EX5 has been available has been running without issue on that IOS. I don't know how useful this data is, but I can continue to build a list, though it looks like every switch that I have that is running 15.0(2)EX5 from the factory that is getting upgraded to 15.0(2a)EX5 has the 15.2(2r)E1 bootloader, with a few cases with the 15.0(2r)EX3 bootloader.
Does anyone have information on when an IOS upgrade will trigger a bootloader upgrade? One thing I can't put a finger on right now is that during the last few rack/stack/configs of new stacks I have noticed that some of the switches running 15.0(2)EX5 from the factory that are being upgraded to 15.0(2a)EX5 are receiving a bootloader upgrade while the vast majority are not. -
[Struts] Reload the same page but scroll automatically to where it was
Hi,
I have a form and it is quite long with a vertical scroll bar. Now when the user scrolls down and changes a value, I need to reload the same form with other values and display it to the user. When the form reloads, it should not show the top of the page as if it were accessed for the first time. It should automatically scroll down to the position where the user left. I think this can happen, but I am not able to work this out.. Please help. In order to reload the form, I am using
new ActionForward( mapping.getInput() )
Thanks
SJIs there still a search engine selected?
You can click the search engines icon on the search bar and open Manage Search Engines.<br />
You may need to click the Restore Defaults button to restore missing search engines. -
I must have my computer reimaged. I have Photoshop CS5 and Lightroom 5.7. How do I inform Adobe that I will be reloading these programs to the same computer?
And to directly answer your question, you don’t inform Adobe, you merely deactivate PS, reimage, then reinstall and reactivate PS with the serial number(s), and relicense LR with the serial number(s).
If this computer isn’t yours and you don’t have the serial numbers, yourself, then that could be a problem, although there may be software that can find the serial numbers. On a PC platform, download and run the Belarc Security Advisor and see if it finds the serial numbers you need. It’ll only find the current product serial numbers, not the prior versions that an upgrade might be based on, so then you’ll be stuck. -
How can I see that I already have a song on my Ipod and review my full list of songs all together? So I don't reload the same song.
In iTunes, try changing "album artist" tag to the same name for eack track,
also make sure that "track number" values are correct and different for each.
(select all songs of an album > lmb > get info) -
Why does the back arrow just reload the same page most of the time
why does the back arrow just reload the same page most of the time
== This happened ==
Not sure how often
== most of the time since I installed itHi Keith.
This is probably a normal behavior that's induced by the way pages are done. Can you provide a link to a page where this happens?
For example, wikipedia articles often have links that lead to sections of the article and not to actually different pages, as you may know. If you click the Back button, Firefox will lead you to the section of the page you were looking at when you clicked that link. Is this perhaps what you're talking about?
AJAX pages (i.e. pages that take advantage of heavy duty javascript code and server side technologies) often have troubles like these. It's very hard to prevent this from happening from the browsers' point of view, but Mozilla is trying to find a way for Firefox 4 (at least like time I checked they were). So using the back and forth buttons in gmail will probably be troublesome. -
Reloading the same jar at runtime
Hi Friends,
I have loaded the jar at runtime using the urlclassloader, but now I want to reload the same jar of different version again.
Is it possible, if yes ..Could you please explain.
Thanks in advance,
KkIf your application permits, you can do this:
1. Create an URLClassLoader with an URL referencing the original version of the JAR;
2. Create an instance of a class, most probably a Runnable, keeping a reference to it;
3. Use the object created in 2.
And when you want to reload the JAR, you set the reference to null, perform any cleanup needed, and repeat those three steps again.
Something like
public class MyApplication {
public static void main(String[] args) throws Exception /* error handling removed for clarity */ {
URLClassLoader loader = new URLClassLoader(new URL[] {new URL("name.jar"});
Runnable run = (Runnable) loader.loadClass("com.mypackage.MyApplicationStage2").getConstructor().newInstance();
run.run();
System.out.print("Press Enter to reload name.jar, or Ctrl+C to exit: ");
new BufferedReader(new InputStreamReader(System.in)).readLine();
run = null;
loader = new URLClassLoader(new URL[] {new URL("name.jar"});
Runnable run = (Runnable) loader.loadClass("com.mypackage.MyApplicationStage2").getConstructor().newInstance();
run.run();
}And then the class in name.jar could look like this (old, then new):
package com.mypackage;
public class MyApplicationStage2 implements Runnable {
public void run() { System.out.println("Old code"); }
package com.mypackage;
public class MyApplicationStage2 implements Runnable {
public void run() { System.out.println("New code"); }
}Edited by Looce on Nov 8, 2008 6:00 PM (three steps, not two) -
I loaded LR CC and it open flashes the welcome screen and then NOTHING. Uninstalled and reloaded and same thing happen. ! !
CC applications close immediately after launch
-
OS 8.0 update OTA to my 4S has killed the device. After the initial attempt failed I tried via iTune Restore and got Error 29.
Attempts to restore to an older version (7.1.2) failed as well. Same error.
The phone is stuck in the familiar "connect to iTunes" screen.
Has iOS8 destroyed my phone?Hi vijay294,
Welcome to the Apple Support Communities!
I understand that you received a restore error while attempting to update to iOS 8 and now you see the Connect to iTunes graphic on your display. In this situation, I would recommend using recovery mode to restore your iPhone. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
Accessing the same stateful session bean from multiple clients in a clustered environment
I am trying to access the same stateful session bean from multiple
clients. I also want this bean to have failover support so we want to
deploy it in a cluster. The following description is how we have tried
to solve this problem, but it does not seem to be working. Any
insight would be greatly appreciated!
I have set up a cluster of three servers. I deployed a stateful
session bean with in memory replication across the cluster. A client
obtains a reference to an instance of one of these beans to handle a
request. Subsequent requests will have to use the same bean and could
come from various clients. So after using the bean the first client
stores the handle to the bean (actually the replica aware stub) to be
used by other clients to be able to obtain the bean. When another
client retrieves the handle gets the replica aware stub and makes a
call to the bean the request seems to unpredictably go to any of the
three servers rather than the primary server hosting that bean. If the
call goes to the primary server everything seems to work fine the
session data is available and it gets backed up on the secondary
server. If it happens to go to the secondary server a bean that has
the correct session data services the request but gives the error
<Failed to update the secondary copy of a stateful session bean from
home:ejb20-statefulSession-TraderHome>. Then any subsequent requests
to the primary server will not reflect changes made on the secondary
and vice versa. If the request happens to go to the third server that
is not hosting an instance of that bean then the client receives an
error that the bean was not available. From my understanding I thought
the replica aware stub would know which server is the primary host for
that bean and send the request there.
Thanks in advance,
Justin
If 'allow-concurrent-call' does exactly what you need, then you don't have a problem,
do you?
Except of course if you switch ejb containers. Oh well.
Mike
"FBenvadi" <[email protected]> wrote:
>I've got the same problem.
>I understand from you that concurrent access to a stateful session bean
>is
>not allowed but there is a
>token is weblogic-ejb-jar.xml that is called 'allow-concurrent-call'
>that
>does exactly what I need.
>What you mean 'you'll get a surprise when you go to production' ?
>I need to understand becouse I can still change the design.
>Thanks Francesco
>[email protected]
>
>"Mike Reiche" <[email protected]> wrote in message
>news:[email protected]...
>>
>> Get the fix immediately from BEA and test it. It would be a shame to
>wait
>until
>> December only to get a fix - that doesn't work.
>>
>> As for stateful session bean use - just remember that concurrent access
>to
>a stateful
>> session bean is not allowed. Things will work fine until you go to
>production
>> and encounter some real load - then you will get a surprise.
>>
>> Mike
>>
>> [email protected] (Justin Meyer) wrote:
>> >I just heard back from WebLogic Tech Support and they have confirmed
>> >that this is a bug. Here is their reply:
>> >
>> >There is some problem in failover of stateful session beans when its
>> >run from a java client.However, it is fixed now.
>> >
>> >The fix will be in SP2 which will be out by december.
>> >
>> >
>> >Mike,
>> >Thanks for your reply. I do infact believe we are correctly using
>a
>> >stateful session bean however it may have been misleading from my
>> >description of the problem. We are not accessing the bean
>> >concurrently from 2 different clients. The second client will only
>> >come into play if the first client fails. In this case we want to
>be
>> >able to reacquire the handle to our stateful session bean and call
>it
>> >from the secondary client.
>> >
>> >
>> >Justin
>> >
>> >"Mike Reiche" <[email protected]> wrote in message
>news:<[email protected]>...
>> >> You should be using an entity bean, not a stateful session bean
>for
>> >this application.
>> >>
>> >> A stateful session bean is intended to be keep state (stateful)
>for
>> >the duration
>> >> of a client's session (session).
>> >>
>> >> It is not meant to be shared by different clients - in fact, if
>you
>> >attempt to
>> >> access the same stateful session bean concurrently - it will throw
>> >an exception.
>> >>
>> >> We did your little trick (storing/retrieving handle) with a stateful
>> >session bean
>> >> on WLS 5.1 - and it did work properly - not as you describe. Our
>sfsb's
>> >were not
>> >> replicated as yours are.
>> >>
>> >> Mike
>> >>
>> >> [email protected] (Justin Meyer) wrote:
>> >> >I am trying to access the same stateful session bean from multiple
>> >> >clients. I also want this bean to have failover support so we want
>> >to
>> >> >deploy it in a cluster. The following description is how we have
>tried
>> >> >to solve this problem, but it does not seem to be working. Any
>> >> >insight would be greatly appreciated!
>> >> >
>> >> >I have set up a cluster of three servers. I deployed a stateful
>> >> >session bean with in memory replication across the cluster. A client
>> >> >obtains a reference to an instance of one of these beans to handle
>> >a
>> >> >request. Subsequent requests will have to use the same bean and
>could
>> >> >come from various clients. So after using the bean the first client
>> >> >stores the handle to the bean (actually the replica aware stub)
>to
>> >be
>> >> >used by other clients to be able to obtain the bean. When another
>> >> >client retrieves the handle gets the replica aware stub and makes
>> >a
>> >> >call to the bean the request seems to unpredictably go to any of
>the
>> >> >three servers rather than the primary server hosting that bean.
>If
>> >the
>> >> >call goes to the primary server everything seems to work fine the
>> >> >session data is available and it gets backed up on the secondary
>> >> >server. If it happens to go to the secondary server a bean that
>has
>> >> >the correct session data services the request but gives the error
>> >> ><Failed to update the secondary copy of a stateful session bean
>from
>> >> >home:ejb20-statefulSession-TraderHome>. Then any subsequent requests
>> >> >to the primary server will not reflect changes made on the secondary
>> >> >and vice versa. If the request happens to go to the third server
>that
>> >> >is not hosting an instance of that bean then the client receives
>an
>> >> >error that the bean was not available. From my understanding I
>thought
>> >> >the replica aware stub would know which server is the primary host
>> >for
>> >> >that bean and send the request there.
>> >> >
>> >> >Thanks in advance,
>> >> >Justin
>>
>
>
-
How can I set up a second Itunes account on the same computer. I have my Itunes account on my wifes computer and she wants her own Itunes account on this same computer. Since it's her computer and her Windows log on account, I don't want her to have to log in as someone else. I have my Itunes account on my own computer...it looks like I might have to take Itunes off her machine (delete the whole program) and then reload with an entirely new account?
Of course you will want to back up through iTunes. Because you're using the same computer and you don't your wife to use a different login, the only other option is that you will need to create a separate user account (in Windows) on that computer, open iTunes, and restore from the back up. The two libraries will be separate through the user profile of Windows. If you had a Mac it would be the same, because you just simply can't have two iTunes libraries coexist under the same user account at the same time.
-
Home sharing to Apple TV with multiple users on same computer
I have two different users on the same computer. To facilitate sharing their music and movies to eachother, they are each using Home Sharing with the same Apple ID. As long as both users remain logged in, this works with no problem. Except for Apple TV. The Apple TV can see each library, so they both show up in the list under Computers, but only one is accessible. It's either the first one that broadcast itself, or the first one that Apple TV connected to, I'm not sure which. But, once that's established, the second library will remain in the Computers list, but any attempt to connect to the library will fail. It appears there is a limitation that Apple TV can only connect to a single library per physical computer, even though it can tell there are multiple libraries there.
Does anyone have any idea how to work around this without consolidating the libraries? Being able to connect to multiple libraries is the goal, not consoludating them.I don't have that set up anymore, but used to. I had no problems sharing from either library. Of course it may have changed since I used it, but wouldn't see why.
-
i have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device? one is an iphone 6 and the others are ipad mini first gens, each ipad has 64gb and the iphone has 128, need to keep the data seperate as they are not all mine
Itunes content and pics are NOT part of the backup that itunes performs.
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
You should transfer any purchases from iphone regularly: File>Transfer Purchases , if they fail to be transferred when you sync.
You buy one and only one download. It is your responsibility to move/copy/backup your purchases.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes -
Are captions and tags in backup when reloading after a computer crash?
I have Adobe photoshop 11. I have backed up my photos in an external hard drive and also on carbonite. If my computer crashes and I need to reload my photos back onto my computer will the captions and tags still be there? I was wondering because when I just look at my photos on the hard drive it does not look the captions are there. Is there a special way to save them so they are there?
If you use the backup command in the organizer file menu, all your media files will be saved, as well as the catalog which contains all the information about your media files : their location (path), exif camera data, your tags, captions etc. The restore command in the organizer will let you recover everything where you want to (same computer or not).
If you are using any other external backup solution, only your media files will be saved, not the catalog and its data, unless you also backup the catalog; it's a folder containing the database and associated files. You find its location in the Help, System Info menu.
You could also use the file menu of the organizer to 'save metadata to files', which would write the tags and captions in the header of the files themselves. If you reimport those files in the organizer, tags and captions will be recovered. -
Hello! I hope this has not already been asked and answered but I did honestly try to find an answer and failed. Anyway:
Mac with CS2 currently installed.
QUESTION: If I buy the CS4 upgrade, can I install it and have both CS2 AND CS4 running on the same computer? Not necessarily simultaneously...just be able to launch one or the other.
If yes, where might instructions for such an installation be?
Thanks a bunch.
PS. I tried downloading a trial version of CS4 from Adobe website and could not get their "special" downloader to work. Tried Safari and Firefox. Is there some special trick?It is too easy.
I can't make myself get rid of ID2 and IDCS, though I no longer use them (or IDCS2) for production.
ID2 - IDCS - IDCS2 - IDCS4
OSX 10.5.8
MacPro
Maybe you are looking for
-
Spinning cursor. iCal + Mail problems
Hello! I have a problem that shows itself in two ways. Nr 1 and the first problem was: Aprox 20 seconds after i start iCal i get the "spinning wheel" and the whole computer start acting slow. I can't even go to other programs or check activity. I hav
-
How to add a certificate to IIS global "Server Certificates" list using PowerShell?
Hi, been surfing the web for an example on how to add a certificate to the "global" IIS "Server Certificates" list using PowerShell but to no luck. I already have code in place on how to tie / associate a specific website with a specific cert but not
-
My iPad is not recognized by my computer. Therefore, it can't sync to iTunes on my computer.
My iPad can't sync to iTunes. Ipad to be recognized by my computer. What can I do to fix this problem?
-
Hard drive crash - Merge mail datbase
Hi guys, Very urgently need help! Last night my hard drive crashed running 10.4.11 Server, on a dual 2.0 Mac G5... I tried Disk Utility and Drive Genius - which both report the disk being fine. But upon startup the drive just freezes about 5 minutes
-
Export invoice type master table
Dear All, I want master table for export invoice type of following :- B Export Under Bond D Deemed Export N Export Under Claim for Rebate U Export Under Letter of Undertaking please check & confirm. Thanks, Vishwas