Pse 13 wia driver

On my desktop I'm running win7 64bit and my scanner is CanoScan 8400f. It worked ok with pse 11, so I installe pse13 and the so the "fun" stared. When trying to import image it sayes "No WIA compatibele devices were detected etc". I have tried support from all three companis (Adobe, Canon and Microsoft) blame eash other. Have anyone an idea of where to find a WIA 64 bit driver for pse 13.

You can uninstall and reinstall the Canon driver http://www.usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0900334902EN.htm
If Canon supplies scanner software you can use that to save as a .tif and open in PSE.
Finally Vuescan does have 64 bit Twain drivers. Go here VueScan Scanner Software for Windows, Mac OS X and Linux and give it a test drive.
Gene

Similar Messages

Im using HP laserjet M1120N MFP printer and its required WIA driver.

hi,
im using HP laserjet M1120N MFP printer.
last time i dont have any issues to printer or scan, and lately i cant scan
and only able to print out.
its required me have WIA driver. anyone know how to fix its.
thanks

Hello zuzack97,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

WIA driver

Hi all, i have problem in my hp deskjet f735 all in one, when i wanna do scanning from toolbox on printer properties in my laptop, they ask for wia driver. Please help to solve this problem, i do need your advise on it, thank you

I m stil cant do scanning thru printer devise due to still ask for WIA driver, i download HP Solution Center and i can do scanning thru it, hope it can solve for this time. But still i wanna know about WIA driver and how to get it.

WIA driver needed for scanning

Hi there
I frequently use my Photosmart 2610 for scanning. Today, it has started giving me the error message "You need a WIA driver to use this device". Never had a problem in 18 months so why now? Where do I download the WIA driver?
Many thanks. CTodd

Hi CTodd,
Welcome to the HP Forums! I understand that you cannot scan with your HP Photosmart 2610. I am happy to help you with this issue! I have some questions for you:
What version of Windows are you using? Which Windows operating system am I running?
Can you make copies with the printer?
In the meantime, please try the HP Print and Scan Doctor.
Hope to hear back, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

WIA DRIVER for HP 915

Need WIA Driver for HP 915 All in One Printer..

Hi Kedar31,
I understand you are looking for the WIA driver.
Windows Image Acquisition (WIA; sometimes also called Windows Imaging Architecture) is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. It was first introduced in 2000 as part of Windows Me, and continues to be the standard imaging device and API model through successive Windows versions. It is implemented as an on-demand service in Windows XP and later Windows operating systems
Resource: Wikipedia
The Shell Hardware Detection service runs as LocalSystem in a shared process. It shares an executable file with other services. If the Shell Hardware Detection fails to load or initialize, Windows 7 start up proceeds. No warning is displayed, but the error is recorded into the Event Log.
Dependencies
Shell Hardware Detection will not start, if the Remote Procedure Call (RPC) service is stopped or disabled.
If the Shell Hardware Detection is stopped, the Windows Image Acquisition (WIA) fails to start and initialize
Source: batcmd.com
To summarize, these services are necessary for scanning. Please complete the following steps to see if we can resolve the issue you are experiencing.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persists, please use the HP Print and Scan Doctor. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
Source: Try the HP Print and Scan Doctor for Windows
Click here to download and run the utility > HP Print and Scan Doctor
Please let me know the outcome of the tests performed, you will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item. The tests performed depend on the version of software, the screenshot below is only an example, your PSDR scan test bmight look different.
I look forward to hearing from you. Knowing the outcome of the Print and Scan Doctor will help to point us in the right troubleshooting direction!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Deskjet F4272 need WIA driver

I've had no problem using my all-in-one for several years until yesterday. I try to scan a document and it tells me I need a WIA driver. I've downloaded the lastest version of the drivers for this model, and it still doesn't work, still get the same message.
Where can I get this driver, please?
This question was solved.
View Solution.

Hi,
Download and run HP Print and Scan Dr utility from link below to troubleshoot the issue.
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

WIA Driver Not Found

Whenever I want to scan papers from my Brother MFC-490CW Printer, it says: "You need a WIA Driver to use this device. Please install it from the installation CD or manufacturer's website and try again." I also just upgraded to Windows 10. Please help! Thank you.

Hi,This forum deals with HP products. As I can see on Brother's site, the printer currently not supported on Windows 10 according its compatibility information:http://support.brother.com/g/b/oslist.aspx?c=us&lang=en&prod=mfc490cw_all According the following list Windows 10 native drivers gonna become available for your printer in early December later this year, but the Windows 8.1 drivers are most likely to work on Windows 10:http://support.brother.com/g/s/id/os/windows.html#mfc You may try installing the Windows 8.1 drivers below:http://support.brother.com/g/b/downloadlist.aspx?c=us&lang=en&prod=mfc490cw_all&os=135 Best of luck,Shlomi

Adobe PSE hard drive space

I am in the process of moving pictures (using Move in Windows) from my hard drive to an external hard drive. When completed there is still an image of the picture remaining in Adobe PSE which is not connected. I have not removed in from the catalog yet.
My question is, is this image a duplicate copy of the original? If not what would be the hard drive space it is taking up relative to the original?
Please note this is not my Backup, but am using the external drive to store files I seldom will be using.
Thank you
Harv

I am in the process of moving pictures (using Move in Windows) from my hard drive to an external hard drive. When completed there is still an image of the picture remaining in Adobe PSE which is not connected. I have not removed in from the catalog yet.
My question is, is this image a duplicate copy of the original? If not what would be the hard drive space it is taking up relative to the original?
You most definitely should not be using Windows to move photos that have been imported into the Organizer. This disconnects the photos. You will not be able to do anything with the photos from Organizer until you reconnect them. There are several ways to reconnect the photos. Once you fix this problem, you should only use the Organizer to move your photos from one disk to another. Use folder location view (alt-ctrl-3) to do this.
Your photos are not, and never were, in the Organizer. They exist on your hard disk, and Organizer contains a pointer to the actual photo. The photo you see in the Organizer is a small thumbnail, not your original photo, which remains on your hard disk wherever you put it. The thumbnail takes up only a very little space.

Problem with the Officejet 6500A. WIA driver not recognized

I can't scan from my printer to my computer. I did a diagnostic and it failed on the WIA scan. On the printer it says it doesn't recognize the OCR or it lost a connection but I have it connected with a usb. Can I download a new driver for it or do I have to do a full factory restore? I looked online at forums where other people have the same problem and that was the only solution I found.
I have an HP Pavilion dv7 laptop and an OfficeJet 6500A. I would really appreciate a solution to this.

I have the HP 6500A Plus and a HP WINDOWS 7 laptop, and the scan function stopped working properly after a year, and I had the exact error messages you did. I could not scan to computer. It took me two days to find the solution. The WIA, or windows image acquisition wasn't running. Before you begin, if windows fax and scan is also disabled, go to control panel and click on PROGRAMS, then click TURN WINDOWS features on and off within Programs and Features. If windows fax and scan is working skip this step. Under PRINT & DOCUMENT SERVICES, make sure that two boxes are checked: INTERNET PRINTING CLIENT AND WINDOWS FAX AND SCAN.
Here is the sequence to activate WIA:
Click or press windows icon or start at lower left bottom:
In the search box type SERVICES, THEN ENTER. When the screen appears click on SERVICES (LOCAL) in the left column.. When this opens scroll down to WIA, it should be on AUTOMATIC AND RUNNING, and if possible start it. This is what I could not do, as I kept getting error message 1068. But I learned there are 2 other services that WIA needs to function properly. ALL THREE HAVE TO BE STARTED AND ON AUTOMATIC.
Scroll down to : REMOTE PROCEDURE CALL, THEN SHELL HARDWARE DETECTION, see if they are STARTED or on AUTOMATIC. When I activated the shell hardware detection I went back to WIA and it started, and I no longer got the error message. This last one is the one that solved the enigma, and the Scan to Computer worked immediately, as did windows fax and scan. Take your time as I did, as I am not a computer wizard, and it should solve the dilemma.

HP 5610 ALLINONE - WIA FILE DRIVER REQUIRED

Hi
My HP 5610 worked fine for many years. On the 13th April 2014 I updated Windows 7 and then my nightmare started. The HP does not scan or print. It shows it needs a WIA driver. I tried to uninstall printer but it only uninstalled partially. Now it does not want to reinstall again. I tried HP scan doctor but it gives the following error message "The installer cannot access this registry key. Please ensure that the installer has access to the registry and click Retry.
Registry Key : HKEY_LOCAL_MACHINE\SYSTEM.
I tried help from microsoft - nothing
I tried registry scan - nothing
I tred installing other printers - nothing
PLEASE HELP !

Hi Stoney47,
Welcome to the HP Forums!
I see that your HP 5610 does not scan or print.
I would recommend the following:
1.) Perform a level-three uninstall. Fatal Error 'Error 1155. Not Found.' (MSI Error 1155) Displays During Software Installation in Windo.... Please look at Solution one.
2.) Reboot the PC.
3.) Run the HP Printer Install Wizard for Windows for the re-install.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP LaserJet 1536dnf MFP driver download not working

Not working since I upgraded Windows . Also completed uninstall, complete reinstall, should be plug and play, went to Hp site downloaded driver specific to this printer, gets almost to the end, even shows that scan operation should work but then error message " needs WIA driver to use this device" - cannot get this printer to work from my HP Laptop EliteBook 2540p using Windows 7 Professional 64-bit operating system. Is there a universal print driver I can use?

Hi @Drivemeinsane ,
I understand that you are having issues installing the printer software. I would really like to be able to help you resolve this issue.
Here is a Universal driver you can try.
HP Universal Print Driver for Windows.
The WIA error that you are receiving is part of the Windows Operating System.
Run this Microsoft Fit It Tool to see if it will resolve this issue.
Diagnose and repair Windows File and Folder Problems automatically.
This document is to Check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
Back up the registry first.
How to back up and restore the registry in Windows.
Restore Default Startup Type for Windows Image Acquisition (WIA).
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300          "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp        = "MF Toolbox Ver4.9"
CNCRFN           = "MF8300"
CNC.MDL          = "Canon MF8300"
CNC.SRS          = "Canon MF8300 Series"
CNC.DeviceDesc   = "Canon MF8300"
CNC.SPInfo       = "Canon MF8300 Scanner"
CNC.TwainDS      = "Canon MF8300 Series"
CNC.ColorGear    = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName     = "WIA Canon MF8300 Series"
greeting
Sixten

How I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone.

Canon 350XT: Which driver to use to read the card?

http://146.184.121.145/inetCA/en/serviceDetail/method/load/id/45/sid/7/mid/0002200146/type/S
This page does not show what each is used for.
WIA Driver 5.6.0 for Windows XP > WA560EN seems to be obvious. But it didn't work.
Why don't they list what each is used for? What is a WIA driver?

Picture Transfer Protocol (PTP) is a protocol developed by the International Imaging Industry Association to allow the transfer of images from digital cameras to computers and other peripheral devices without the need of additional device drivers.
It is standardized for USB by the USB Implementers Forum as the still image capture device class.
If this doesn't work, something else is wrong!
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

PSE 7 Move all files & folders to another location

I have 3000 pictures in the following folder structure in Windows 7: C:\Users\User Name\Documents\My Pictures
Under that structure there are 9 folders i.e., Family, Military Service, Friends etc. that contain the actual photos:
I want to move the entire thing catalog and all to C:\My Photos
without having to do a bunch of re-working. There must be a way to do it but I can't figure it out.
So that the 9 folders and all the sub-folders are directly under the C:\My Photos folder
I cannot figure out how to do it. The move command is constantly grayed out on my File Menu so I cannot access it.
Thanks for any help
John

Hi Paige
Well it does not seem to be working out for me.
Here is what I am trying to accomplish.
I just went to Windows 7. I am using a dual boot system with two hard disk drives. One has XP Pro on it which I used with PSE for years with no problems, The other drive has Windows 7 on it. When I boot from the XP drive the Windows 7 drive becomes drive D and of course when I boot from the Windows 7 drive the XP drive becomes drive D.
All of my PSE 7 photos on the XP drive are backed up to external drives using the PSE backup function. I have PSE 7 installed on the Wlndows 7 drive and working. The XP drive has the old file structure that I found to be laborious as I explained in my first post. I wanted to import all of my pictures from one of the PSE backups onto the Windows 7 drive and use the new folder structure I described in my first post, C:\Family Photos.
I booted using the Windows 7 drive, loaded PSE 7 and selected the backup recovery function. I restored from the PSE backup drive which was Drive G that was created by the backup function in the XP version of PSE 7. I restored to a temporary folder (C:\Hold Pictures) using the original structure (C:\Documents and Settings\User Name\My Pictures. My intent was to get the old file structure on to the Windows 7 drive and then using PSE folder display as you described move the pictures folder to C:\Family Pictures. It restored the files correctly to the \Users\User Name\My Pictures folders of course it went much deeper than that to get to the actual pictures. I then tried to move the folder (Pictures) using PSE but nothing worked right. PSE seemed to handle it correctly but when I looked at the properties of the pictures in the catalog they were all to Drive D (the XP drive) using the old structure and not on the C: drive which they should have been..
I finally gave up and will work on this again some other time. I removed PSE7 from the Windows 7 computer in that it is probably a mess on the catalogs and I thought I had better start fresh.
I hope all the above makes sense. Obviously I am doing something quite wrong in the procedure
Thanks for your help
John

WIA support for the Canon MX922

Is there a WIA driver for the Canon MX922 multifunction printer? It doesn't respond to my version of Photoshop which requiresa scanner that is WIA compliant.

Hello.
The MX922 uses a TWAIN driver for scanning.
For many of the latest versions of Photoshop, a TWAIN plugin would have to be installed in order to use a TWAIN scanner with the program. Please visit www.adobe.com for information on how to update the plugin for your version of Photoshop.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Pse 13 wia driver

Similar Messages

Maybe you are looking for