PSE 6 can't open Rebel T3 RAW file.

I just bought the Canon Rebel T3 and shot off a few pics using RAW. But when I try to open them with PSE 6, it tells me it can't do it. I HAVE the 6.4 update installed. What am i doing wrong?

Hi,
According to the Read Me file for ACR 6.4
  "The Camera Raw 6.4 plug-in is not compatible with versions of Photoshop earlier than Photoshop CS5 or versions of Photoshop Elements earlier than Photoshop Elements 8 for Windows and Photoshop Elements 8 for Mac. "
So I'm not sure how you applied it or whether it is compatible.
You may need to upgrade PSE or download the free DNG converter.
Good Luck
Brian

Similar Messages

  • HT3825 I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    This page might help.
    Note that your question does not relate to Apple software nor hardware.

  • I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

    I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

    Camera Raw plug-in | Supported cameras  I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

  • Can you open panasonic tz60 raw files in elements 12

    can you open Panasonic TZ60 raw files in elements 12

    Yes. Go to Expert Mode and from the top menu click:
    Help >> Updates
    Install camera raw 8.5

  • How can i open Nikon D610 RAW files in Element 12 ?

    How can i open Nikon D610 RAW files in Element 12 ?

    You need the ACR 8.3 plug-in to open D610 NEF files.
    Check what Help / About Plug-ins / Camera Raw reports for the version number. 
    If it is something less than 8.3, update to the ACR 8.3 plug-in using Help / Updates from the Editor.  If that says there are no updates, then uninstall and re-install and try again.
    If it is already ACR 8.3 then the files are likely corrupted by using an obsolete version of Nikon Transfer or ViewNX with them.
    You can fix that corruption using a utility from the following webpage, where 14-bits is likely what you’d want to specify, and only use Nikon utilities that are as new as your camera:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

  • I can't open or view RAW files?

    I have two Macs. One is an iMac and one is a Macbook. I usually always use my iMac for photo processing and storage. And I use an external hard drive to store all my photos.
    Now I recently had to take my macbook with me because I was going out of town and could not transport my iMac. But I was missing a lot of updated things on my macbook, such as my preferences and settings, apps, files, etc, since I rarely use it... and I wanted to transfer all that to my Macbook without the use of tedious uploading and formatting. So I reformatted my macbook by backing it up onto an external drive, erasing the disk, and then migrating my data from my iMac to my macbook. Everything seemed just fine with all my latest settings and files where they should be... until I opened a folder or Bridge and could not view or open any RAW files.
    It said I did not have enough access privileges. I am the admin of both my computers, but I do have other accounts for my mom and 2 others for whatever reason (they have never interfered before). I rarely use those accounts and they are NOT admins. But it said that only my mom's account had the privileges to read and write the files on my external hard drive (which has all my photos.) I logged into her account, and sure enough, I could view and open all the RAW files. I can view and open jpegs on my account now, but not any RAW files.
    I tried going to "get info" on the external drive, and it said that everyone could read and write. But when I went to individual folders and files, it said only my mom could read and write. And even when changing the permissions so that everyone could, it still didn't work.
    I also have the latest software updates... I have tried doing disk utility. And right now it's still going, saying it has 8 hours left, and so far there are hundreds of thousands of problems. It never was like this until just today.
    I really need to get this problem solved. I have work to do and without being able to even see my RAW files, yet alone edit them, makes it really hard. I also want to avoid creating a new account because my account now has all my personal stuff... from all my music on my iTunes, to my actions, to my settings, applications, etc. And it would be very hard to redo all of that. So it would be great if I could somehow fix my user privileges.
    Does anyone know what to do? I'd appreciate any help from you!

    http://support.apple.com/kb/HT2963

  • Can't Open Photoshop-saved RAW file in Photoshop...

    I've just gotten back from my school's library, where I was using one of the scanners to scan my negatives. I scanned the files directly into photoshop CS3. In retrospect, I absolutely should have saved in tiff, which has worked before, but this time I saved the files in raw. This is Photoshop Raw, not Camera Raw. I assumed that I could open these files back on my home computer (Photoshop CS4), but apparently I was wrong. If I try to open any of the raw files, I get a dialogue box called "Photoshop Raw Options", and if I hit "OK" I'm told something about missing color profiles, then I'm given an image of gray noise. If I change any of the settings in the dialogue box (files were saved at 16-bit grayscale with Mac byte order), I am told that "Specified image is larger than file," and I can't open the image.
    What's going on? Why can't I open in Photoshop files that I just saved in Photoshop? Have my past few hours just been a total waste?

    jbz2105 wrote:
    Have my past few hours just been a total waste?
    Yep, pretty much unless you know the exact size and can correctly fill out the required dialogs required to open a Photoshop "raw" file. The "raw" format is not, as you've found out related at ALL to Camera Raw. It's really a holder over format from the early years used back when there weren't some file formats available on some computer systems...and yes, you SHOULD have used TIFF.

  • Can't open Canon 6D raw files

    I'm using windows XP and Lightroon 2.7, and am having problems opening Canons 6D RAW files, I can use CS6 but I like LR better.

    You need LR4 to open file from 6D. And LR4 doesn't run under win XP.

  • Can't open Nikon D610 RAW files in PSE 12

    HELP!  I just upgraded from PSE 10 to 12 in hopes that it would support camera RAW for this camera and I still can't open the files - it says unsupported!  I have client files to edit and I might cry.  TYIA!!!

    You just need to update your camera raw plug-in to ACR 8.3 using Help / Updates… in the Editor.
    If you are on XP or Vista or are still running the trial, then that automatic updates won’t work, but you can still use these steps to manually install ACR 8.3 in PSE12:
    http://forums.adobe.com/message/5959479#5959479

  • CAN NOT OPEN  CANON EOS20D  RAW FILE IN PHOTOSHOP CS2

    I had Photoshop CS2 installed on my PC some years ago and could open my raw files from my canon eos 20d. I changed the hard drives in my pc to solid state drives and had to reinstall photoshop cs2. I could not activate photoshop as it was too old a version so I had to download from adobe website with their activation code. Now, I can not open any of my canon eos 20d files. I have taken some now photos just a few days ago and the problem still arises. I get the message that it does not recognise this type of file. Any ideas?

    You downloaded, extracted (unzipped) the Camera_Raw_3_7.zip and copied/moved the Camera Raw.8bi to
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS2 (windows 64 bit system)
    or
    C:\Program Files\Common Files\Adobe\Plug-Ins\CS2 (windows 32 bit system)
    Camera Raw 3.7 update for photoshop cs2 Windows
    Adobe - Photoshop : For Windows : Camera Raw 3.7 update
    other cs2 updates
    Adobe - Photoshop : For Windows
    Adobe - Bridge : For Windows
    Adobe - Creative Suite : For Windows

  • Can't open canon g16 raw files.  I have updated to Adobe camera raw 8.2 and am working with PS CS6.

    Here is my issue, I can't open the Raw files from my new Canon G16.  I have run all the Photoshop updates and even installed the Camera raw 8.2 update but still cannot open my raw files.  The will open in Canons digital photo professional program so I know they are not broken files.  I have even installed the DNG converter and they will not even open with that.  What am I doing wrong?  I bought this camera specifically for the ability to shoot in raw.  My canon 60d raw files work fine.

    Why on Earth did you upgrade only to ACR 8.2 ?
    The current version of ACR is ACR 8.4.  You should ALWAYS update to the latest version.  Once a camera model is supported, it will be supported in all subsequent releases of ACR.
    Beside new camera support, each ACR update contains any number of unannounced, unheralded bug fixes, improvements and enhancements.
    What is the exact version of your OS and of your Photoshop CS6? For instance, if you're on a Mac, you should be running Photoshop CS6 13.0.6.  I can't remember offhand what the latest version for CS6 is.
    Did you install ACR correctly.  ACR 8.2 should work for your camera (but update ACR anyway).  What version shows up when yo go to About Plug-in… > Camera Raw.
    You of course need to relaunch Photoshop, maybe even reboot your machine, and then Purge the Cache in Bridge.
    Next time you ask a question, please give sensible, complete and detailed information from the beginning:
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Can't open Canon 70D raw files with elements 12

    Can anyone advise me why elements 12 will not open my Canon 70D raw files?  When I have tried to update elements it tells me that there are no updates available. The Adobe Photoshop Camera Raw plugin is version 8.0.0.137

    The Canon 70D was first supported in Camera Raw 8.2.
    Camera Raw plug-in | Supported cameras
    EOS 70D
    CS2
    8.2
    5.2
    Camera Raw 8.5 should be available for Elements 12 via Help > Updates
    Photoshop elements 12 and camera raw 8.5
    If you have windows XP, Vista or Mac OS X 10.6.8 you won't get the camera raw 8.5 update, because it doesn't work on those operating systems.
    In that case you should be able to update to Camera Raw 8.3

  • How come my Nikon D610 can not open photoshop CS6 raw files

    any one know,i just bough a New Nikon D610 digitalcamera, i am upload in to Photoshop CS6 raw file, but can not open,why?

    Nikon D610 support is coming in the next version of Adobe Camera Raw 8.3
    http://labs.adobe.com/technologies/cameraraw8-3/?tabID=details#tabTop
    You can download the Release Candidate version from
    http://labs.adobe.com/technologies/cameraraw8-3/

  • Can I open Nikon D7100 raw files in elements9?

    hi
    recently purchased nikon d7100.  after raw files opened in view window of iphoto, could not import these files.  i have attached  screen shot from iphoto:     I have already downloaded the dng converter.  How do i get the unreadable file to the converter
    Message title was edited by: Brett N

    Nikon D7100 required minimum Adobe Camera Raw 7.4 in order to import and PSE9 support ACR 6.1 to 6.5.
    For more information please check following links:
    Camera Raw plug-in | Supported cameras
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Camera Raw-compatible Adobe applications
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Can't open Canon 500D raw file in PSE7

    Since moving to a new laptop running Win7 Pro 64 bitI cannot open raw files created by my Canon 500D
    camera. Is there something besides PSE7 that I need to install? I believe this worked under XP Pro SP3. Thanks

    In the Editor click Help >About Plug-in >Camera Raw
    Make sure you have version 5.4 or higher.
    If that’s OK check your display resolution by going to Control Panel >Appearance
    Sometimes the camera raw plug-in does not display fully (or properly) if the screen height is set to less than 800. This usually affects netbooks more than laptops.
     

Maybe you are looking for

  • Tables or Logical database to create standard report for Equipment BOM?

    Dear All My client has requirement for the report with fields like to see the status of Equipment BOM(input of Equipment number in selection screen) or for Particular set of Materials(input of component number in selection screen) available stock qua

  • Quicktime will not open after upgrading to "Snow"

    Quicktime will not open after upgrading to "Snow". The light underneath the dock icon lights up but the application does not open. Suggestions?

  • Query slow due to dblink

    Hi All, We are experiencing slow performance for a query which is using dblink. Our Database version is 8i Our OS is Windows 2000 the explain plan is as below. Explain plan:- Execution Plan 0 SELECT STATEMENT Optimizer=CHOOSE (Cost=7494 Card=1 Bytes=

  • CS5 custom build with GTX 285 for long-form 4k projects

    I've been researching nonstop for several days, and it's time to ask for your expert opinions.  I would appreciate any help. I'm ordering a new system for Production Premium CS5, and mostly I will use Premiere Pro CS5 to edit long-form projects (huge

  • Stuck on ask a question page. cant get anything I can work with

    I had a page with bookmarks then it all disappeared and now all I have is a page titled at top --- Ask a Question Firefox Support/Mozilla Firefox. there is nothing on the page I can work or remove . I can see the page I want but cannot get to It.