PSE 7 - video delay

I have Windows Vista 64 bit operating system and the videos on PSE 7 from my Canon SLR often mometarily stop during playback.  I have updated PSE 7.  I contact HP expecting that my new laptop was malfunctioning but was able to view the videos using Windows media player without experiencing any delay.
Any assistance with this would be greatly apreciated.

Which version are you using now? You can't be using PSE 7 on a mac, because there is no PSE 7 for mac. The frame delay problem exists in the mac versions 6 through 10. You can either upgrade to PSE 11 or use a program like the free giffun from stone.com to assemble the gif and set the frame rate.

Similar Messages

  • External iSight camera video delay in 10.5.2

    Since upgrading from Tiger to Leopard, external iSight camera has a short video delay which renders it unusable for video conferencing in iChat AV. Has any one noticed this? The cam has the latest firmware so that is not the problem. The delay is very obvious in Photo Booth as well. The delay is also apparent on my Macbook Pro 17 with built in iSight. Is this normal?

    Welcome to Apple Discussions, bzamp1
    I do not experience the delay you describe, but I do not have any known solutions to offer. Because the problem is the same on all of your Macs including your MacBook Pro, you can rule out processor speed as the sole problem.
    Some iNtel Mac users report poor AV sync in Photo Booth even though they are running no other applications and have plenty of free space on their hard drives. However, you experience the problem with other apps, too. The fact that your problem occurs with multiple software applications remove candidate issues like bad applications software, low internet connection speeds, or improper network configuration.
    If you updated to 10.5.2 via your Mac's Software Update... feature, try the following:
    • Backup your Home Folder, or at very least, your important files.
    • Repair permissions. (Click here if you need help.)
    • Then download and apply the Mac OS X 10.5.2 Combo Update.
    • Finish with another Permissions Repair, and then check your iSight again.
    Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • I have a problem of display live video delay of nearly 10 minutes.

    I use FMS 4.5 Interactive.
    I have a problem of display live video delay of nearly 10 minutes.
    Is there a way to customize or edit it.
    Which previously was a regular.
    please guide me.

    please advise me.

  • Macbook to TV via DVI-HDMI cable - video delay

    Hello All,
    I have my Macbook, on occasion, attached to my Samsung LCD via Apple's mini DVI to DVI adapter, plugged into a DVI to HDMI cable, which is attached to my TV. The audio is routed from the headphone jack on the Macbook to the associated Audio input on the TV.
    Problem I'm having, is that the video seems delayed to the TV, by a matter of milliseconds. I've verified this by putting the Macbook in mirror mode, and I can visually see the changes in picture on the Macbook a few milliseconds before the TV displays them. Since the audio is perfect and real time, I'm looking at video on the TV that's out of sync with the audio, albeit by a few milliseconds.
    I don't think the picture problem can be solved - it's most likely just the nature of the technology, as the signal can pass much faster to the internal display than an external, and the TV in general might be causing the delay as well. I've tried video game mode, and setting the TV as the primary display, and it does not help.
    So now, what I'm looking for, is an application that I can launch when I want to use this setup that will delay the audio out of the headphone jack. If I can delay the audio at the same rate as the picture, than I'm all set.
    Does anyone know of a program that can do this? Ideally, I'd love to have this program run when FrontRow is enabled.
    Thanks for any help you can provide!
    -Mark

    webman2k wrote:
    So now, what I'm looking for, is an application that I can launch when I want to use this setup that will delay the audio out of the headphone jack. If I can delay the audio at the same rate as the picture, than I'm all set.
    Good luck on finding a program that will delay the audio. Perhaps running the audio through an amp and then to your monitor would "slow" it down a trifle. Maybe the video "slows" down converting from DVI to HDMI?
    Seems like a lot of trouble for a little gain.

  • How do I create a variable video delay of a live stream...

    I have a live video feed from my webcam in my Flash Application. I have a second video window next to it that I want to place a variable delayed video of the live stream. Therefore, I need to save the video stream in memory/disk and create this variable delay, say 5-60 seconds. As well as, continue to capture the live stream. The camera I am using suppots H.264 encoding.
    How do I create a variable length queue or buffer to hold the video stream coming into the flash application. Do I create a memory variable or write this to disk ? I have been looking over the ActionScript 3.0 documentation and I can not figure out how to code this either way ( as a memory variable or write to disk queue ).
    I want to be able to change the delay, view the delay stream in slow motion and scrub through the delayed stream.
    I would like to do this with out having to use Flash Media Server.
    Thanks,
    Bob

    I am sure it is practically impossible to accomplish that on the client side. Although theoretically it is conceivable to use NetStream.appendBytes() but it requires an extremely complex implementation.
    I suggest you look into FMS DVR capacities:
    http://help.adobe.com/en_US/flashmediaserver/devguide/WS236AE81A-5319-4327-9E44-310A93CA09 C6Dev.html

  • RMBP, Chrome, Youtube: Video delays when in full screen

    Hi all,
    I have a retina Macbook Pro running Mac OS X 10.8.2, Chrome 25.0.1364.99. When I watch youtube videos there is normally no lag. Once I switch into full screen mode, there's a slight delay where instead of the video the screen will show a blank white screen before switching to the video.
    This results in a slight 0.5-1s lag of the video behind the audio.
    Opening the same video on Firefox and going to full screen doesn't result in this blank white screen and does not result in video lagging behind audio.
    Any suggestions?
    Thanks in advance.

    Thank you,
    it also worked for me
    simonsglcfc wrote:
    Had the exact same problem the past couple of days, was really frustrating as it was making videos play delayed in full screen and I tried searching for it everywhere but couldn't find any solutions.
    Anyway, what I did has fixed it as a temporary workaround:
    1. In Chrome, type chrome://plugins in the address bar
    2. Click top right to expand +Details
    3. Navigate to:
    Adobe Flash Player (2 files) - Version: 11.6.602.171
    Shockwave Flash 11.6 r602
    Name:
    Shockwave Flash
    Description:
    Shockwave Flash 11.6 r602
    Version:
    11.6.602.171
    Location:
    /Applications/Google Chrome.app/Contents/Versions/25.0.1364.99/Google Chrome Framework.framework/Internet Plug-Ins/PepperFlash/PepperFlashPlayer.plugin
    Type:
    PPAPI (out-of-process)
    Disable
    MIME types:
    MIME type
    Description
    File extensions
    application/x-shockwave-flash
    Shockwave Flash
    .swf
    application/futuresplash
    FutureSplash Player
    .spl
    Name:
    Shockwave Flash
    Description:
    Shockwave Flash 11.6 r602
    Version:
    11.6.602.171
    Location:
    /Library/Internet Plug-Ins/Flash Player.plugin
    Type:
    NPAPI
    Disable
    MIME types:
    MIME type
    Description
    File extensions
    application/x-shockwave-flash
    Shockwave Flash
    .swf
    application/futuresplash
    FutureSplash Player
    .spl
    You need to disable the first of the two entries...which I have highlighted in Bold above.
    Hope that helps.

  • I want to display live video in LV, with the option to click on "delay" button, to view what happened N s. ago (i.e., a variable video delay)?

    Hi. I have a standard video camera + PCI 1408. I can nicely show the current image, using LL Ring examples. I want a boolean switch so I can switch from watching the live video to the video recorded N seconds ago. My initial hope was to use LL Ring, with
    lots of buffers, and copy/extract either latest buffers or a buffer several acquisitions ago. However, this seems to add no delay at all. Suggestions please? Thanks Patrick

    Patrick,
    What I start with is the sequence acquisition. I change it from one time to continuous, and simplify it a little bit.
    I have included an example that shows how to set up a buffer and display delayed video.
    One thing you have to do is open MAX and change the maximum number of buffers for IMAQ to something larger than 50. I usually select around 2000 buffers so that I never run out.
    Bruce
    Bruce Ammons
    Ammons Engineering
    Attachments:
    Delayed_Video.vi ‏66 KB

  • Audio/video delay when viewing (ex: youtube)

    whenever I try to view an online video for example on youtube or any online video lesson, there is a several second delay stammering through the whole thing. I dont have any updates needed.
    help?

    Thanks for your trying to help me out.......
    The problem with your answer seems to indicate that it is normal for one to exit an entire app (in this case, Safari) just to exit viewing a YouTube clip.  Then you would have to go back to Safari, go to your mail, then find where you were up to!  It it not like Apple to design stuff this way; there must be another way!

  • What I've noticed about the Video Delay Problem of...

    I was able to take a look at my old vids from way back V110. I've noticed everytime they improved the camera pictures, the video & audio sync suffer. My old videos didn't have audio delay problems even if they were more than a minute long.

    I ordered 2 iPhone 4's from the AT&T Premier site on July 9 (my company has an agreement with AT&T). My credit card company immediately flagged the purchase as possible fraud, so it took a day or two to clear that up. The order went to "Processing" status on the AT&T Premier site on July 12. It stayed in that status until yesterday, July 20, when it changed to a status of "Shipped" and I got an email from AT&T with the FedEx tracking number. FedEx says that the phones shipped from Texas yesterday night and are on schedule to be delivered to me in Connecticut today (July 21). That's only 8 business days and includes the screw up from my credit card company - better than I expected. The "Processing" time probably included the time it took to ship the phones from Apple's factory in China to the AT&T facility in Texas.
    By the way, here's the deal I got from AT&T Premier:
    $38.50 - 550 shared minute plan (1st iPhone)
    $ 9.99 - Additional line (2nd iPhone)
    $19.25 - 2Gb personal data (1st iPhone)
    $19.25 - 2Gb personal data (2nd iPhone)
    $ 0.00 - pay as you go texting

  • Setting Up Video Delay

    Is there a way to set up the software so that you can delay live footage?
    Here's what I'd like to do....
    I coach volleyball so I would like to set up live video of the players performing skills. It would be set up so the camera would film them and the time delay would allow them to go to a monitor to watch themselves.
    I've seen discussions on how to set it up with an older version of Tivo but I would like to use Elements if possible.
    Thanks!

    There is hardware and software that will allow you to do what you want. My golf coach uses such. Basically, she is able to record to the HDD (like Adobe OnLocation, part of PrPro's suite), and then allow playback, with Frame-by-Frame shuttle, slo-mo, and even a telestrator to add lines, indicating aspects, like club shaft angle. She can alter the display to include, or remove the actual video, so that one can see just the path of the illustrated club, or shoulder angles, or a combo of both. Her console has a shuttle ball to manually control the speed. Her unit has a built-in thermal printer to give you a hard copy of the Frame, or a sequence of stills of Frames. If interested, I can get the make/model of her unit, which fits into a small suitcase, and has detachable legs to stand it up. Her's runs from a motorcycle battery and works very well. The monitor is somewhat small, but has an adjustable hood so that viewing in bright sunlight is still pretty good. She uses a Canon miniDV tape camera, tethered by FireWire. It is a great teaching aid. She can also upload the video to the miniDV tape, so that one can take it home to review.
    I've had ski racing clinics, where similar was utilized, and it is portable enough to get up the mountainside on a snow mobile.
    Good luck,
    Hunt

  • Why is there a video delay when mirroring through HDMI?

    Since I installed Mountain Lion, I am experiencing a delay of about 0.5s on video that is ouput through the HDMI port vs. the image that is showing on my screen.
    Not only is it very distracting, since the cursor on the external display lags behind my motion on the trackpad, but the delay between the audio playing through the MacBook's speakers and the video playing on the external display destroys the viewing experience.
    I'm wondering if anyone else is experiencing this. It only occured after Mountain Lion.
    Sherif

    Have the same problem with 42' LG TV. I have tested a few different HDMI cables without any success.

  • How to save a Windows 7 PSE video project to a .MP4 or .MOV file format?

    I've created a pan & zoom video slide show with PSE 8 and saved it to a WMF file for use by my church.  However, they recently switched over to using a MAC for presentations.   Does PSE 13 allow you to save video projects as MP4 or MOV files suitable for Apple platforms?  I know about free malware like Format Factory.  I uses that once and learned my lesson.  I'm hoping that the PSE 13 is friendlier to Apple formats.  Yea or nay?

    You need to ask this question in Premier Elements forum at this link:
    <Premiere Elements>
    Good luck.

  • HD Video Delay Issues in CS3 Vieo Capture

    I am using CS3. I am having a problem.
    I have an issue with video capture.
    Here is my setup....
    Canon XH A1 Camcorder
    Set to: HDV60i
    Adobe Premier CS3
    I'm using the Capture (F5) video option. My video in the capture window is
    running about 1/2 a second behind the video on my camera
    screen. Same for audio. For example: When I move the camcorder left or
    right, the capture window on screen delays a second and then
    pans my movements.
    Everything seems to work find If I am in SD mode.
    Any ideas? Happens on my friends HD cam as well.
    Bruce

    I have the same problem with the audio having a time offset with respect to the video track. Coincidentally, I also am using a Canon XH-A1 and use HDV in 60i. I worked around this by capturing an entire tape and unlinking the audio track from the video, moving the audio track to the correct offset by looking at frames where I could precisely correlate audio and video, and then re-linking the audio and video tracks.
    The time offset is not the same with every tape. Sometimes the audio is earlier and sometimes later wrt video.
    THE ABSOLUTE WORST PROBLEM IS THAT I HAVE HAD THIS AUDIO TIME SHIFT CHANGE ON ME AFTER WORKING ON THE PROJECT FOR A LONG WHILE!!!!! I believe it might be caused by the re-conforming problem. Needless to say this is extremely frustrating to have the editing tool corrupt the artistic work. Fortunately I had rendered intermediate copies on DVD so I at least have a reference to see by how much each tape's audio track had re-timeshifted after re-conforming.
    I have hundreds of cuts in a sports video that was destroyed by this bug. Now I need to change the cut points in each segment on the time line and re-apply all of the transitions to make it right again. ARRRGHHH!!! OK, end of rant.
    Has anyone else had the time shift in the audio track change on them like this? Is this a known issue with the re-conforming bug? Is there any assurance that the audio won't shift to yet another offset after I manually change the few hundred clips on the timeline?
    Thanks.

  • IChat Audio/Video Delay

    Hey, I recently bought a Macbook Pro and some of my friends have added me on iChat which I thought would be amazing. I've been left disappointed. The first video conversation I had was fine and seemed to work, but ever since there has been a severe delay with it. Audio in particular. When talking there can be up to a 30 second delay for the person I am chatting with to get the message leaving this feature unusable.
    Any ideas what could be causing this? Also their video seems really pixelated. Is that normal? Look forward to some help with this problem! Any information could help!
    Thanks in advance,
    Stefan

    I have been experiencing a similar problem since upgrading to 10.5. The video is about 5 - 20 seconds behind the audio. The audio is in real time. I've tried the above and checked activity monitor and there is nothing unusual clogging up the CPU. I have an iBook running 10.5 and there is no trouble with it.

  • Fms 5.0 Sound Video Delay

    My video chat program on fms 3.5 windows server 2003 run sound when the screen is not delayed, but the program is placed in fms 5.0 window when server64-bit operating system will generate sound and picture 6-15 second delay, how is this problems going on, I hope not the server, ask someone experienced it, how to solve.

    I am also experiencing this. I am running Flash Media Server on my dedicated CentOS host, and finally connect a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync. by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over $25 processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate.
    Any suggestions would be great.

Maybe you are looking for