PSE11 Why does Sharpening not work in Quick or Guided Mode?

I have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
Surely there si something wrong here. The feature is there so why doesn't it work?
Any ideas would be welcome. If it isn't fixable I shall want a refund based on the product not being fit for purpose.
Thanks
dlgoodyear

Thanks for confirming that it should work ok. I've now done the obvious and uninstalled/reinstalled and it's fine now.
Dave

Similar Messages

Why does abode not work on my galaxy tab2

Why does abode not work on my galaxy tab 2?

The games dont load they just say I need to update to the latest version or say that it is not compaterble with it.

Why does sound not work on my Mac Air?

Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.

Open System Preferences > Sound > Output
Make sure the coorect output devices is selected and the Mute button is not checked.

CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3. Why does it not work any more? Thanks!

Hi,
CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3 - i.e, you could just select the tab. Why does it not work any more? Thanks!

Hi
https://discussions.apple.com/thread/4325038?tstart=0
CCT

Why does Firefox not work here in China anymore, since January of 2015?

I have used Firefox for years, as the fastest and most reliable browser for me, esp in China... not anymore! Last month (unknown to me) a hijacker called Vosteran took over my Firefox browser. I finally realized it and got it cleaned up using Malwarebytes anti-malware, and downloaded a new Firefox... now SAME problem exists, even with Vosteran removed!
Firefox will not allow me into ANY normal sites, saying they don't have the proper security code. This includes my Yahoo front page, email account, ESPN and other common sites that are certainly NOT dangerous. So, WHY does Firefox not work anymore? It is useless to me here in China the way it works now.

hello rickinchina, first please make sure that the '''date, time & timezone''' are set correctly on your system and that firefox is set to directly connect to the internet (that's the "'''no proxy'''" setting in the firefox ''menu ≡ > options > advanced > network > connection - settings...'').
if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page (but don't do it for real) and inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
please report back with those two pieces of information. thank you!

Why does iMessenger not work/takes ages to load?

Why does iMessenger not work/takes ages to load?
- done all the log in stuff (username and display name but then takes for ever to load so just give up!

How has it stopped working?
ARe you on wifi or cellular data?

Why Does 3G Not Work on my IPhone

Apologies everyone - I am a real numpty with my IPhone. I have switched just about everything on i think I need to to enable 3G and my service provider says that in my present location the wireless service is excellent. So why is that on my top toolbar I don't see 3G - just my signal strength, service provider and a round circle then the date. I cannot get connectivity unless I am at home next to my own router. Can anyone help as I have had this problem now since I have had my phone and I really do need to get it sorted out. Any guidance at all is very welcome indeed.

Hi,
What type of iPhone do you have. I heard that 3G cannot switched off on an iPhone 4s, so if you have that one, it can only be a service provider issue (worst case: Your antenna does not work).
Did you try on a different location, like downtown?
If you have an iPhone 4 or 3Gs you can check if 3G is switched off: Go to settings->General->Network. At the top there is a 3G switch that should be on (blue).
Let us know if this works.

"Exit" Button to destroy Xlet-why does it not work???

Hey there!
I am very confused with KeyEvents in MHP and kind of stuck..
I just want an EXIT Button for my Xlet-that's all!! I tried to different ways:
The first one is compiling without any errors but it just does not work, either in XletView 3.6 nor in the IRT Implementation..Is there something i missed?
Here is (a piece of) my first code:
public void keyPressed (java.awt.event.KeyEvent KeyEvent) {
int key = KeyEvent.getKeyCode();
if (KeyEvent.getSource() == butt1 && key == HRcEvent.VK_ENTER)
try {
destroyXlet(true);
catch (XletStateChangeException ex){
butt1 is the "Exit" Button.
I also tried this Code using the dvb UserEvent and UserEventRepository which worked pretty well with XletView, but failed when testing it with the IRT..
public void userEventReceived(org.dvb.event.UserEvent userEvent) {
int key = userEvent.getCode();
if (userEvent.getSource() == butt1)
if ( key == HRcEvent.VK_ENTER){
try{
destroyXlet(true);
catch (XletStateChangeException ex){
Why does this one not work with the IRT-Implementation?? Nothing happens at all when pressing ENTER on the RC..
Has somebody an idea or fixed out which kind of mistake i made?
As i said i am really stuck and i had a look at many examples, but nothing worked at all!!

Hello Steve!
Unfortunately your suggestion did not work too..
I added context.notifyDestroyed() to destroyXlet(), the problem is that my application does not react on pressing VK_ENTER..
Do you have any other ideas?
The second code with dvb events just works without adding notifyDestroyed,
but just with XletView, not with the IRT RI..

Why does siri not work on my iPhone 4s?

Just purchased iphone 4S and Siri is not working. I have the most up to date software - 5.0.1 When I hold down the home button I get the voice control feature that's on previous versions. Any ideas?

It kind of sounds like Siri might not be activated. Go to Settings - General - Siri and confirm it's turned on. If it is, you might also make sure "raise to speak" is turned on, then go to your home screen and raise your phone to your ear. Does the Siri audible prompt sound?
If nothing else works, I'd do a current sync, then go to Settings - General - Reset and do a full reset. If that doesn't work, try a Restore. Here's a link for how to do that: http://www.youtube.com/watch?v=Jzyy4puapig You won't lose any data or apps, but you will have to reinput some odds and ends like your WiFi password. Good luck.

Why does Thunderbird not work with Windows 8.1

I have used thunderbird now for about 6 years, for all my website accounts. During that time I have had very few problems, about 9 months ago I started using Windows 8, I transferred all my accounts from my old machines running on XP pro to new machines running Win 8 and thunderbird ran ok. I have auto updates running so I am assuming both thunderbird and windows are updating whenever! About 4 weeks ago I started experiencing major problems with Thunderbird, it would start then freeze, then it would start again then freeze, if I ran it in safe mode it would work for a while. Now it opens and freezes, the message at the top just says ' Thunderbird is not responding'. Even in safe mode now it will not work! I have tried uninstalling and re-installing, I have even tried installing an earlier version of Thunderbird, I Have deleted the profile and forced it to produce a new one, I have spent hours trawling different sites trying to find an answer, and you know what, the only conclusion I could come to was, nobody seems to care whether this problem is solved or not, so reluctantly I have had to give up and I moved all my accounts to Outlook, which works perfectly with Windows 8.1. I think that should have been the answer, right from the start of the problem!

The point is, it shouldn't matter if you're using McAffee or Norton or not using any anti-virus at all. Thunderbird works on XP. Thunderbird works on Vista. Thunderbird works on 7. But despite what the FAQ says, Thunderbird does _NOT_ work on Windows 8. This is a problem that many people are having and Mozilla _OUGHT_ to be able to fix it.
I hate to bitch because Thunderbird is free and it's a damned good program. But this damned good program that worked through three earlier iterations of MicroSoft operating systems is unusable on 8.1. Anybody who has any knowledge of user experience can tell you that a program becoming unresponsive at random for anywhere from 1 to 3 minutes is simply not acceptable.
This problem has been known for quite some time now. Is anybody in Mozilla support even looking at it?

Why does printer not work after network password changed?

I changed the password on my Airport Extreme (5th Gen) which is connected to an iMac,base, and now my HP Photosmart C4750 will not print. I have tried uninstalling/reinstalling the printer software using the original HP printer CD. The error message "The selected WI-Fi Network "network name" is not within the reach of the device." Do I have to change the password back in order for it to work on my wireless?
Appreciate any assistance.

Hi,
The software provided for Mountain Lion does not offer any wireless configuration, therefore it may not work well on the OS.
Connect the printer to the network through the EWS by following the steps below:
Step one: Restore the printer's network default settings
Touch the ATM button () next to Wireless / Scan .
Touch the ATM button () next to Wireless Menu
Touch the ATM button () next to Wireless Settings .
Use the up and down ATM buttons () to select Restore Network Defaults , and then press OK .
Touch the ATM button () next to Yes to confirm your selection.
Step two: create a temporary network connection with the printer to access its EWS
Click the Wi-Fi icon on your Mac.
Click on Join Other Networks.
Click on Show Networks.
Select the HPSETUP network and click on Connect
Allow 2-3 minutes to establish the connection.
Step three: Follow the Wireless Setup Wizard from teh EWS
Open Safari and click the Bookmarks icon, select Bonjour from that window
Note: if the Bonjour option is missing under the Bookmarks menu click on Safari > Preferences > Bookmarks and check the Bonjour box within the Collections section.
From Bonjour double click the C4750. the EWS appears.
Open the Networking tab.
Click on Wireless.
Click the Start Wizard button on the bottom right side of that screen and follow the steps to connect the printer to your network.
Once you are done, reconnect your Mac to your home network by following step two but selectng your home network.
Shlomi

Why does hulu not work with ios5

Just upgraded to ios5 on IPad. Hulu does not work, any suggestions would be greatly appreciated

http://itunes.apple.com/us/app/hulu-plus/id376510438?mt=8

Why does hotmail not work when I open it with firefox?

When I open firefox in safe mode hotmail is functional but when I open firefox normally hotmail does not work. I can't seem to find out what add ons I have.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
If it does work in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Why does bluetooth not work well

I have had two IPhones now and like everything except the bluetooth connection. I have tried 5 different bluetooth devices on both phones and not found one that works. Does bluetooth work better on the new IPhone or does Apple have a plan to ever fix this problem? If not, I will be forced to use another phone since I travel for my job and have to use bluetooth when driving

I have had every model of the iPhone (except for the 3GS) since the beginning. I haven't had a bluetooth headset or other supported device yet that it did not work with. That includes probably 5 different headsets from different manufacturers, 3 cars, 2 different bluetooth speakerphones for cars, and several sets of bluetooth speakers.

Why does PDF not work, when TOC is enabled?

Hello,
when I enable the TOC function in skin editor and publish my project in PDF, the file does not work and only contains strange strokes and quads.
What is the reason for this?
I used Captivate 4 before and verything worked well. Now , with Captivate 6 I got this problem or bug.
Thank you for help!
Regards
Martin

Hello, welcome,
This is a known problem. There is a fix (see link), but if you used a poster image it will not be visible:
http://helpx.adobe.com/captivate/kb/captivate-swf-doesnt-play-acrobat.html
Lilybiri

PSE11 Why does Sharpening not work in Quick or Guided Mode?

Similar Messages

Maybe you are looking for