PSE13 trial version and it will not work with Windows 7

I have downloaded PSE13 trial version and it will not work with Windows 7

I have been using PSE 13 for 3 months with no problems.   When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne

Similar Messages

  • HT4972 2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store.  Is there any way to find out which apps will work with 2nd generat

    2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store?  Is there a way to find out if the App will work before you download?

    Look to the app developer to provide that information when browsing the iTunes Store.
    The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
    If you aren't happy then sell it and buy a new one.

  • TS1538 Ipod Classic will not work with Windows 8. Is there a fix?

    Itunes will not work with Windows 8. I have the latest version of itunes!
    When will the fix be available?
    When I try to Sync my ipod, nothing happens.

    Hi,
    You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
    You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
    For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version.

  • HDX 9010nr, Radeon 2600 will not work with WIndows 7

    Apparently, HP is not going to support the HDX 9010nr for Windows 7.  That's the bad news, the good news is that it "mostly" works. 
    The only big issue is that the display driver stops every few minutes and then restarts.  So you sit there for thirty seconds while the machine recovers.  But, it doesn’t support a second screen; and worse, every 10th time the video driver crashes; it locks up the whole machine. 
     ATI has a version of the Radeon 2600 software that worked with the Release Candidate (RC) of Windows 7, but it will not work with the shipped version of Windows 7.  ATI recommends that you get a version from your hardware vendor.  Which brings me back to the first sentence.  HP isn't supporting the 9010nr. 
    The question is do any of the "supported" HP laptops have the ATI Radeon 2600?  If so, might that work on the HDX 9010nr? 
    This question was solved.
    View Solution.

    Updating the BIOS solved this problem.

  • I downloaded the new version and it will not work on my sytem

    I have used Firefox for the last three years with no problems. It asked me to download an update version 6.01 and now it will not work at all!!!???? I have cleaned it out then reloaded still the same issue will not hook up to the web page

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Perifials will not work with Windows 7

    I have a new HP h8 1214 PC WiFi with Windows 7 installed.  My old HP ScanJet 4850 and my HP Personal Media Driove 1600 will not install. My previous operating system was XP. 
    I would like to install the ScanJet 4850 because it can send slides and film strips to my computer to be used in a slide show with Adobe Photoshop Elements and  Adobe Premiere. I have started a slide show of these items and did not get all of the slides transferred before my old computer conked out.
    I would like to use my Personal Media Drive for backup and it also has pictures I would like to be able to obtain.
    I don't know if perifials that are not WiFi will install on a WiFi computer.  Apparently not!
    Any help will be greatly appreciated,
    flyingjewel

    The reason the CD will not work is evident. The CD is for Windows 98,  XP Home or XP Professional.
    The WIN 7 64bit downloaded driver file is what you need. Download and install the driver.
    Here is a link  ( see pg 5 and 11) that discussed the power supply for a PMD drive, your's may vary. But you must have a power supply (modular plug with cord), or brick/adapter (has AC cord into power supply, then another cord that supplies DC).
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • My scanner on the MF4370dn will not work with Windows 8 or 8.1.

    I have a Canon MF4370dn which the scanner portion has not worked right since I got a computer with windows 8 and will not work at all since I downloaded windows 8.1.
    I have reloaded the scanner tools, tried the Presto! PageManager that came with the oomputer. I have downloaded the latest drivers for the scanner from the site.
    It worked with Windows 7 fine, but that computer no longer is functional and I use my scanner often.
    Any ideas?
    Solved!
    Go to Solution.

    Fixed my own problem by redownloading and installing the Windows 8 (x64) drivers and the toolbox software. Thanks anyway.

  • I have a Toshiba e-studio 2830C network printer and it will not work with mavericks. I have some software that the printer guy said to try that was for a newer model printer, but it is not working. Please help....I need this printer tonight.

    the Print Mode has a line through it and says it has not been updated.
    How do I even install new printer software,I went throught the install process but for what ever reason it is still not working.
    Aloha
    David

    Please look at Reset Printing System feature

  • Flash player will not work with Windows Vista?

    I installed flash player but had to uninstall it after I did an update as my Pc would not work properly. Does anyone know which version will work please. Thanks.

    I have a machine with Vista Ultimate SP2 and Flash Player 11.8.800.94 and it works as it should.
    What exactly does "my PC would not work properly" mean?

  • Firefox v. 29 will not work with Windows XP in accessing Comcast email.

    My Comcast email will not load and I cannot access any email after installing Firefox v. 29. I went to Microsoft web site and installed the Service Pack 3 for Windows XP. This did not help. Do I need to reinstall Firefox 28? The only other solution is to get a new computer it seems with Windows 8.1 and I'd rather not unless absolutely essential.

    Moses: a tech rep at Comcast finally told me they needed to do some upgrades to make the full version of their email program compatible with Firefox 29. He set the email on 'Lite' which seems to work. This was the 4th call to Comcast! Now email seems to be working due to this change. Thanks for the suggestions.

  • HP 2311C USB Monitor will not work with Windows 8.1

    Just done a clean install of Windows 8.1 on my HP Spectre XT Pro.
    The HP2311C monitor is working fine as a USB hub and the built-in Network card but will not detect the monitor as a USB monitor.
    This was working when it was a Windows 8 build and previous Windows 7 build.
    I have downloaded and installed all the HP drivers and run the HP Support Assistant to make sure everything is up to date.
    My two other collegues who have done the same upgrade with the same kit and are also having the problem.
    If we plug the HP2311C into a Windows 8 or Windows 7 machine the USB monitor works fine.
    Tried several reboots, connections and uninstalls, which have not worked. Also there are no event logs to suggest an anwser.

    I am having the same problem with my SPECTRE PRO 13 and Windows 8.1 - most unhappy about it. There is no 8.1 driver for the L2311c and I get no help out of HP as to when there might be one . These items are not cheap in NZ and I feel I have wasted my $$. It works fine on XP!

  • LaserJet 3055 will not work with windows 10

    need hekp

    HP LaserJet 3055 is compatible with Windows 10, it will work with operating system Windows 10. Check below link for printer compatibility with Windows 10:
    http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=HP%20LaserJet%203055%20All-in-One%20Printer&vendor=HP&Locale=1033%2C2057%2C3081%2C4105%2C16393&ModelOrVersion=Q6503A&BreadCrumbPath=LaserJet%203055&LastSearchTerm=LaserJet%2B3055&Type=Hardware&tempOsid=Windows%2010

  • Apple itunes 7 wil not install correctly.  Uninstalled previous version and still will not work. Help!!

    Cannot get itunes 7 to install

    Answer previously given by jayg1963.
    Go to control panel, add or remove programs or programs and features (later).
    Remove all in this order: 
    itunes
    apple software update
    apple mobile device support
    bonjour
    apple application support
    Then re-install itunes.  May need to run as an administrator.

  • The latest version of iTunes will not work with my windows platforms. It cannot access the windows runtime library.

    The latest iTunes can't access my windows (including Vista 32 & 64bit, nor Windows 7 64 bit and 32 bit versions) "Runtime" library. I've tried reloading the windows suggested .dll as well as doing a system restore and also downloaded the iTunes update and load it manually, but nothing will work. Is Apple aware of the problem and planning to release a fix, or do I have to abandon iTunes and my iPod?

    Hello there, Enantiomer.
    The following Knowledge Base article provides some recommendations for troubleshooting:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My Photoshop CS (£500 at the time) will not work with Windows 7, what am I supposed to do about it?

    I have just spent at least two hours messing about trying to activate my Photoshop CS (using a new hard disk) until finally being told (via a long useless telephone call and  two long chat sessions) why I can't activate it, and also that it cannot be replaced by CS2 because that is only for Windows XP which of course is to be faded out next year! It seems to me unreasonable that such a large expenditure (£500 at the time) should be casually dismissed as CS being 'not being compatible with...'  and it being a very  'old' program. It was working well for me. Why am I supposed to have to pay for another version? Is this even legal? At the very least there should be some special offer for people in my position.
    Photoshop justify this?

    Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
    As XP is  faded out, there will be an awful lot of people like me complaining.
    But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
    All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
    These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
    If you have any hints for how to translate these old settings...I would kiss your feet!
    Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
    I do hate change!
    Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
    Julia

Maybe you are looking for

  • Needs ur help in tuning a sql

    Hi, I have a partioned table.I am spooling output of an sql which joins the partioned table and another referece table of minimal data. each partion except 3 contains 5 milllion records on average othere 3 partitions has 6.6 million records (each one

  • Looking to upgrade without an internet connection...

    I'm considering an upgrade from CS3 Master Collection to Creative Cloud but I don't and will not have internet access. The only reason I do now is because I am using a public access computer which I can't move my suite to every so many months to vali

  • BeHance Invite Will Not Update in Creative Cloud Menu App

    I have the current version of Creative Cloud, and everyday when I power up my Mac, the same BeHance Invite appears and I reject it, but it will not go away. The request is from "Semih Turk" to join his Feedback Circle. I click to reject this invite a

  • A number of my keys are not working in WORD including escape, spae bar, enter, tab, shift

    I am working in WORD through Citrix and a bunch of my keys will not work. Everything except the numbers and letters will not work. Last night when I was using WORD I got a prompt about sticky keys and filterkeys and something else. I changed a settin

  • MacBook shuts down when streaming video

    I use safari, so my assumption is the problem lies there. I did a software update in January along with upgrading to snow leopard but this problem has been happening since before then. Its only a few years old and the only thig that's wrong with it i


HashFlare