PSE7 Editor fails to recognize screen size. Can this be reset?

The editor program in PSE7 does not properly recognize the screen size of my monitor.  Some photos and parts of menus fall outside the viewable area to the right side.  How can this be fixed? Can some setting be easily changed?  Do I need to reload some part of the program?

Hi,
First of all, the physical size of the screen is not really relevant. If the resolution is set to 1920 x 1080, it still has the same number of pixels whether the screen is 22" or 24". The editor will also work on smaller screens, down to 1024 x 768 I think.
Does your screen look anything like this?
If you screen looks like that, thedouble click I spoke of earlier should be done where the red arrow is.
A screenshot of your screen might help.
The size and position of the window can normally be controlled by windows - the editor will supply a starting point but you should have control over the window.
Have you ever used an additional monitor?
Brian
ps. Sorry, but I can only go to PSE 9 but I think PSE 7 should be similar

Similar Messages

  • My screen on my ipod touch 3rd gen goes to over full screen size. can anyone help me on how i adjust it back to regular size?

    the screen display on my ipod touch 3rd gen goes over full screen size. can anyone help me as to how i get it back to the normal setting?

    Check Zoom features here.
    http://www.apple.com/ipodtouch/features/accessibility.html

  • When viewing the color blue on my iPad it appears greenhe correct color appears on my computer screen. Can this be resolved?

    When viewing the color blue on my iPad it appears greenhe correct color appears on my computer screen. Can this be resolved?

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new.
    And if none of that works, take it to an apple store or call apple support

  • HT3302 I dropped my iPad & cracked the screen.  Can this be repaired? Or the screen replaced?  If so, the approximate cost?

    I dropped my iPad & cracked the screen.  Can this be repaired? Or the screen replaced?  If so, the approximate cost?

    See options in link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • I have dented the back of my new iPad and it is causing a little blur on the screen. Can this be fixed?

    I have dented the back of my new iPad and it is causing a little blur on the screen. Can this be fixed?

    Yes, but "fix" entails replacing yours with a refurbished one at a reduced cost. There is no physical fix in the sense of removing the back unless you were to do that yourself.
    Damage caused by you is not covered under the warranty. You can take it to your local Apple retailer to see what can be arranged.

  • Black margins down each side of my screen, so reduced screen size, can anyone help please?

    I have 2 black margins down each side of the viewable sceen, I've tried going in to 'full screen mode' but all tha happens is that I lose my footers and headers, the screen view still remains long and narrow rather that filling the screen top to bottom and sise to side. Can anyone help please?

    I think the reason your screen looks like this is because the screen was somehow scaled differently in System Preferences. To fix this open up the System Preferences app and click on "Displays". Next click on "Scaled" and make sure it says "1280 x 800" or the top one in the list so it should look like this:
    Then that's it.
    If this doesn't work try restarting your MacBook Pro or resetting the SMC or PRAM.
    Hope this helps,
    - Daniel 

  • RESET OUT THE IPHONE IS A BLUE SCREEN, NOT REBOOT NOW OUT FLASHING BLUE SCREEN I CAN NOT USE, RESET OUT THE IPHONE IS A BLUE SCREEN, NOT REBOOT NOW OUT FLASHING BLUE SCREEN I CAN NOT USE

    RESET OUT THE IPHONE IS A BLUE SCREEN, NOT REBOOT NOW OUT FLASHING BLUE SCREEN I CAN NOT USE

    I have not researched further in solving this issue for a couple of months.  Still using my iPhone 6+ 128GB with around 64GB free space, not dare to load more stuff at the risk of reboot loop.  I am still at iOS 8.1.  Anyone know would 8.1.3 solve the issue?  Thanks a lot.

  • My computer message says NSPR fails, see mozilla for download / can this cause flashcrash? am i expected to buy?

    flash drive or shockwave has been installed 150+ x because of crashes, checking pc performance i have archived message NSPR has failed- get download from mozilla- can I get a free download? and will that cure crash problem?

    The two crash reports with the "bp" prefix are problems with plugins (Flash).
    You can check for problems caused by recent Flash updates and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *downgrade the Flash player to version 10.3 or 11.2
    *http://kb.mozillazine.org/Flash#Troubleshooting
    *http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    *https://support.mozilla.org/kb/flash-113-crashes

  • Fails to recognize screen

    My iMac's screen went black, so I hooked it up to an external monitor. I go into the Displays Preferences and see that the external monitor is the only monitor the computer recognizes. This happened as I just went out of the 3year warranty. HELP.

    I just started having the same problem. Let me know what you find out.
    [email protected]
    Thanks

  • Scanning fails to recognize page size in Acrobat X

    My HP 8500 Pro Premier All-in-one scanner has a 14" flatbed. Even though the paper size parameter is "letter", the scan results in the 8.5x14 image being reduced to the 8.5x11 paper size.
    How do you specify that you only want to use 11" (cropping) of the 14" bed AND want a one to one scale to the output letter-sized PDF document?
    The announcement/discussion similar to this problem does not answer this problem. The menu chains shown do not exist for the HP8500. There is a big difference in behavior between the WIA and TWAIN options. When I change the resolution from 200 to 600 dpi and start a scan, my Windows 7 64-bit system locks up and I have to do a hard power cycle to reboot.
    So far "Show Scanner's Native Interface" option MUST be set to make any progress.

    I was able to get one scanned page to print with perfect margins, but double sided scanned sheet produced shrunken image. Here is the sequence to reproduce the problem:
    Open (execute) "HP Solution Center" (ver 140.0.18.23)
    1L-click on "Scan Document, wait ~1 min for it to respond
    Set "Scan Shortcut Settings"
         Scan Type: Document
              1L-click on "Advanced Document Settings"
                   Select output resolution -> choose any (600)
                   Check "Sharpen"
                   Check "Automatically crop scanned documents" (THIS IS A CRITICAL CHOICE)
                   1L-click "OK"
                   Select "Output Type" -> choose any
                   Select "Scan To" -> choose "Save to file"
                   Select "File Type" -> choose "PDF (*.pdf)"
                   1L-click on "Save to file SaveOptions"
                        Select "File Type" -> choose "PDF (*.pdf)"
                        Enter a "Base File Name"
                        Enter a "Save Location"
                        1L-click on "OK"
                   under "Button Settings", check "Show a preview scan"
                   1L-click "Save Shortcut"
                        Enter shortcut name
                        Enter abbreviated name
                        1L-click "Save"
    1L-click on "Scan"
    wait for scan to complete
    wait for image to be processed
    flip original in flatbed scanner
    1L-click on "Add/Delete" icon
         1L-click on "Add Page(s)"
         wait for scan to complete
         wait for image to be processed
         note image information (lower right-hand corner) is about 8.21x10.64 inches
         Sometimes the image will need to be rotated (1L-click on "rotate" icon, 1L-click
               on "rotate left" (or right)
    1L-click on "Finish"
    wait for image to be finalized and written to file
    go to directory to where file was saved to (Windows Explorer)
    open with Acrobat Reader 10.1.3
    1L-click on top bar icon "Fit one full page to window"
    (IMAGES SHOW EXACT MARGINS AS SCANNED)
    1L-click on printer icon
    1L-click on "Advanced"
         check "Print as Image"
         1L-click on "OK"
    under "Size Options"
         1L-click on "Fit"
         check "Print on both sides of paper"
    under "Comments & Forms
         select "Document"
    (PRINT PREVIEW SHOWS IMAGE WITH ORIGINAL MARGINS)
    1L-click on "Print"
    wait for both sides to be printed
    (BOTH SIDES ARE PRINTED WITH THE HEIGHT COMPRESSED BY 1" (0.5" WHITESPACE
         TOP & 0.5" WHITESPACE BOTTOM) EVEN THOUGH IF YOU ONLY SCAN ONE
         PAGE AND THEN PRINT IT, THE PAGE IS PRINTED WITH THE CORRECT MARGINS)
    The display of the page shows the size to be 68.40x88.67in! (lower left corner). How did it get enlarged?
    Similar results were obtained using Readiris Pro 11 with one additional clue: In the print veiw when you have a double sided source, the print image is inside the image of a spiral bound notebook. Is this the reason the image is shrunk? By the scanner or the print application?
    Both the HP Printer Control Language (PCL) (the only language supported by HP 8500 printer) and Adobe Postscript language (PS) (used by .pdf files) have a scale command.
    If the scanner inserts a scale command between pages and the printer driver (or the application used to print the file) does not have an option to remove it, that would explain this problem.
    I'll go to bed now - oh wait, it's time to go to work!

  • HT4623 when iOS7 was installed all apps purchased disappeared; now when I go to app store I can open app, but cannot get app to install onto the screen; How can this be accomplished?

    When i0S7 was installed on iphone all purchased apps disappeared.  Now when I go to app store I can open app, but cannot get app to install on phone.  How can I get apps installed back onto iphone screen?

    Press your home button, then scroll the home screen all the way over to the right. I found all my purchased apps were moved to a different home screen. Might be a similar issue.. let us know what you found out!!
    Cheers.

  • Screen size problems iPad 1

    I have an iPad 1 and the resolution of my screen is bigger than the screen size. This means that the image is larger than fits on the screen. For instance the keyboard does not show all the keys, and the kindle dispay is too large and I can't read the whole page as it runs off the edges. How can I fix this?

    You are most welcome

  • How to maintain screen size after automatic page refresh?

    I am using an auction site where my personal page updates every 20 sec. Each time it refreshes the screen shrinks down to an unusable size and must be expanded. Is there anyway to maintain screen size in this situation?
    I am the creator of the html code as well for this page. Is there something I can put in the code if the user cannot control this setting?
    Thank you,
    Jim

    First try adding this line if you don't already have it.
    <meta name="viewport" content="width = 320" />
    There are various meta attributes the iPhone uses to adjust the size, etc. Apple has a whole tutorial about coding pages for the iPhone someplace.
    May want to try this link to find more info.
    http://www.google.com/search?num=30&hl=en&newwindow=1&safe=off&q=%3Cmetaname%3D%22viewport%22+content%3D%22width+%3D+320%22+%2F%3Esite%3Aapple.com&btnG=Search
    Message was edited by: DaVBMan

  • Increase the screen size

    Hi Everyone,
    I want to increase the selection screen size, can anyone suggest how do I achieve this.
    I have some of the check boxes and their text elements, where in the screen size is limited to 75 only.
    Any suggestions.
    Thanks,
    Prashant.

    Hi,
    Check the link,
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba83d35c111d1829f0000e829fbfe/content.htm
    Regards,
    Azaz.

  • The iTunes window exceeds the screen size.

    Recently when I open iTunes the window it is deeper than my screen size. This prevents my use of the lower margin with the Sync button and capacity information as well as the opportunity to resize the page. I have tried quiting and re-opening to no avail. Please can anyone help with a solution? I am using an iMac OS 10.7.4 and iTunes 10.6.3.
    Many thanks.

    dronira wrote:
    Hi Chris,
    Thank you, the corner was not within reach to resize,
    There are 4 corners.
    You can drag any of the 4 corners or any of the 4 edges.

Maybe you are looking for