PSE9 - audio working correctly in PSE9 is changed by Premiere Elements 9

When I create a slide show in PSE9 I intermix photos and short movies. The movies have audio tracks. I then add audio to the slide show, ending the audio before each movie and then placing a new audio after the movie. When I send the slide show to Premiere Elements 9 to create a DVD, the audio I have ended in PSE9 continues through the movie giving me dual audio during the display of the movie and making it difficult/impossible to hear the audio for the movie.
I want my PSE9 slide show to be exactly duplicated by Premiere Elements 9. Why doesn't it do this?

You can use the sound mixer in PRE9 to adjust or fade audio levels.
However you will probably find better advice over on the Premier forum:
http://forums.adobe.com/community/premiere_elements

Similar Messages

Smooth jerky exposure changes in Premiere Elements 13

Folks - can anyone tell me how to smooth jerky exposure changes caused by the automatic camera settings (temporal smoothing) over a video clip? (Can't seem to find the temporal setting in Premiere Elements 13).

AndyD74
Thanks for the follow up replies.
Your Edit Menu/Project Settings/General readings suggest that you or the project have not set the correct project preset for the project. If the Canon is the major source of your Timeline content, then the project should not be 1080i (the project's default). It should be
NTSC
DSLR
1080p
DSLR [email protected]
You are going to have to go to a new project to correct that situation. You cannot change the project preset in 13/13.1 once the project preset has been established.
If the project (automatically) is not giving you the correct project preset, then you need to set it yourself (manually) before you import the source media.
File Menu/New/Project and Change Settings
In Change Settings, set for the project preset mentioned above. OK out of there.
In the New Project dialog that appears, rename the project and make sure there is a check mark next to "Force Selected Project Setting on This Project". OK out of there.
Then in the workspace, import your source media with Add Media/
Another factor is the custom made intro that I created in Aurora3d Title Animation. What are its properties and how do they compare with those of the Canon's 1080p29.97. If you remove the Title Animation from the Timeline, do the problems disappear even with the DSLR project preset pointed to?
Please review and consider.
Thank you.
ATR

Saving changes in premiere elements 10

Hi my name is Bryant and here is my problem.
I have my project done, then I create a DVD and watch it. I find changes that I want to make, so I reopen my project and make the changes to the project. I click Save. but when I create the new DVD. the changes that I made are not on the new DVD. Specifically I made font size changes in my menus because the words were to big for the text boxes. So I changed the sizes to a small size and I click the Done button, and I save the changes. I then close out Premiere and then reopen my project again, but it was back to the original font size, Not the smaller font size changes that I just saved. I don't know how to fix this problem? Thanks to anyone who can help me.

gk_ferrell
Premiere Elements 9.0/9.0.1 was notorious due to many of its menu not retaining the background replacements in the finished DVD-VIDEO disc playback. The fix that we found was to add audio muted or non muted to the menu in the Disk Menus section of the program. It appears that these problems were gone in Premiere Elements 10, and I did report that at the time. From time to time, you find a menu whose buttons do not respond to the TV remote. But other than that, not much going on that is not typically explained away by overlapping objects, text maneuvers, spacing of menu markers, and related matters.
Since the project preset direct the program as to what set of the menu .psd set (s, w, or hd) will be available to you in Disc Menus, let us start with:
a. What are you setting as your Premiere Elements 10 Mac project preset? What is the size of this project as reflected in the burn to Quality Area for Space Required and Bitrate?
b. In the upper right corner of the Movie Reel menu choice is there a "HD" label or none?
c. Are you replacing background in both main and scene menus? How many scene markers, how many main menu markers, and how many stop markers and how placed?
d. When you preview the menu, are you getting any messages about object overlapping?
Let us start here and then decide what next.

How to change \Adobe\Premiere Elements\12.0\Encoded Files location to another drive?

Hello. I am using Premiere Elements 12. I am not able to burn blueray disk because I have insufficient disk space. I am using SSD drive so I need to move Adobe\Premiere Elements\12.0\Encoded Files location to another drive. How can I do this?

tolppa
What computer operating system is your Premiere Elements 12/12.1 running on? For now, assuming Windows 7, 8, or 8.1 64 bit....
In the Premiere Elements 12/12.1 Expert workspace, go to Edit Menu/Preferences/Scratch Disc and set the location for the category
named Disc Encoding.
Please let us know if that works for you.
Thank you.
ATR

How do I fix: a problem caused the program to stop working correctly in pse9

HELP!!!!!!!!!!! Here is the message I get. I have removed the twain, I have held down ctrl, shift and alt to clear out preferences and disabled anti virus. It was working fine yesterday until my computer randomly shut down while editing with no notice. After that occurred, I have not been able to get into editor. I can get into organizer. I am using Windows 7 Home Edition. Thanks!

That is what I thought. Cannot figure out how to turn it off, though.
However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise.

Audio fine in PSE9 but not in Premiere Elements 9

When I create a slide show in PSE9 I intermix photos and short movies. The movies have audio tracks. I then add different audio to the slide show, ending the audio before each movie and then placing a new audio after the movie. It plays exactly as I have set it up when I play the slide show in PSE9. When I send the slide show to Premiere Elements 9 to create a DVD, the audio I have ended in PSE9 continues through the movie giving me dual audio during the display of the movie and making it difficult/impossible to hear the audio for the movie clip.
I want my PSE9 slide show to be exactly duplicated by Premiere Elements 9. Why doesn't it do this?

Yes, I created my slide show in PSE9 using the Organizer.
I am able to import a video clip (taken on a digital camera) exactly the same as I can import a still picture. The clip needs to be in an allowed format. First I end the audio I am using for the rest of the slide show 1 or 2 slides before the video clip. Then I place a new audio a slide or 2 after the video clip. It plays back exactly as I want it to in the Organizer slide show. However, when transferred to Premiere Elements 9 to create a VDVD, the audio doesn't end before the video clip - both audios play when the video clip plays creating a cacophony!

Responsive nav bar not working correctly

Hi All,
The responsive nab bar on the site below is working correctly. When it changes from horizontal buttons to vertical, the sub menu buttons do not display correctly and i cannot work out how to correct it, they should display underneath the menu button when clicked on but they don't?
Appreciate any help please.
http://www.clockdoctors.co.uk/index.html

The below css is all you should need for your media queries. I would think about using some jQuery onClick to show those sub menus as it's way to jumpy.
#nav {
width: 100%;
#nav li {
float: none;
font-size: 16px;
text-align: center;
width: 100%;
#nav li a {
display: block;
padding: 8px 0;
border-bottom: 1px solid #999;
#nav li a:hover{
color: #fff;
#nav li ul {
position: static;
#nav li ul li a {
padding: 8px 0;
#nav li a {
font-size:14px;
margin: 0;

How do I create surround sound 5.1 audio in Premiere Elements 10?

Okay, that's my question.
I have a Zoom H2n which captures two stereo channels from its 5 microphones and it creates a pair of stereo audio files. I would like to import them into Premiere Elements 10 on my Mac (OS X Lion on a desktop Mac), create a video and export the video and audio to a DVD with surround sound.
Is this possible? I have a 5.1 video camera, and the sound from that is exported correctly to DVD, so I know Premiere Elements handles existing 5.1 sound correctly.

> please report your success
Confident, aren't we? :->
Audacity would import the sound from the .mts files that my Canon saves video and surround sound to, but Audacity couldn't play the sound. It was there in the waveforms, but just a click came out. C'est la vie. I just went directly to my H2n files, and it works fine with them.
I shoot a video using a regular mic, and I also record the sound externally to my Zoom H2n. I use a finger snap or clap as my clapper board. I have the H2n set to 4 Channel, which means it records two stereo audio streams, one with a name ending in MS.WAV, and the other ending XY.WAV. I use the MS stream as my front, and the XY as the surround. I also make sure the H2n is recording at 48000.
I copy the two .WAV files to my Mac. I copy the video to my Mac.
The current version of Audacity is 1.3.14, which I used. Other versions may vary in how to set them up. You'll need current versions of LAME and FFmpeg, and Audacity directs you to the correct locations to download and install them, if you need to. Then you follow the directions to tell Audacity where to find the files; when all is correct, Audacity displays the version numbers instead of asking you where they are.
In the OS X version of Audacity, go to File -> Import -> Audio ... and locate the MS and XY files. Select them both by command clicking them, then select Open. I get two warning dialogue boxes about working on original files, so I work on copies, click OK both times. Audacity then shows its main window with two files, each having 2 tracks of audio. I do no processing in Audacity, but you may choose to if you wish.
I select File -> Export and in the resulting dialogue box I choose as my format AC3 files (FFmpeg). Choose a file name in the Save As box, then click Save.
Now is the hard part. I get a window for Advanced Mixing Options. Because I have four streams of sound, the window defaults to four channels. However, I need six channels, so I slide the slider over to get the six. For my Mac and Audacity versions,
   Channel 1 is left front
   Channel 2 is right front
   Channel 3 is center
   Channel 4 is low frequency effects (LFE)
   Channel 5 is left surround
   Channel 6 is right surround
By clicking the boxes you connect or disconnect MS left to Channel 1, MS right to Channel 2, XY left to Channel 5, and XY right to Channel 6. Then I click to OK button, and Audacity writes the .ac3 file with the name I gave it.
Start up Adobe Premiere Elements; I'm using 10, and I use the timeline. I import the video file and the .ac3 file. I double-click the video and shorten it to the first useable snap. Then I double click the .ac3 file and do the same.
I drag the video to the timeline and play it just o make sure it's where I want it and to watch the waveforms from the audio portion. Then I drag the audio to the narration track and sync its snap to the snap on the video's soundtrack. If I remembered to record at 48000, all is in perfect sync.
Right-click the video and select Unlink video and audio. Then select only the audio track that is with the video and delete it. Then select the video and .ac3 tracks and link them. Export to DVD, and I get a 4-channel surround sound with the video.
I understand from Audacity forums that the assignments of the various channels to left, right, center, and LFE have changed between versions. Be aware the assignments may not be correctly reported here and that they may change with later versions of Audacity.
Audacity is free, and so are LAME and FFmpeg. Audacity lives here: http://audacity.sourceforge.net/ and its wiki is here: http://wiki.audacityteam.org/wiki/Audacity_Wiki_Home_Page

Premiere elements 11- PitchShifter not working?

Pitch shifter in Premiere elements 11 is not working as good as it was in Premiere elements 7. Here's some of my issues:
When I change the pitch, the end of the audio is cut off/out of sync
When a clip is short, the audio won't play if it has the pitch shifter effect
When I split a clip with pitch shifter applied, the audio skips
I would like it if the pitchshifter would be more like the one that was in premiere elements 7.

Two questions... does your project match your video?
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
And, just what are you editing?
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Premiere Elements not working

When starting, it reports Organiser Database missing or corrupt. When trying to create a new database, Adobe crashes and ends.
Any suggestions?

Hi AT,
You mentioning the psa.prf file helped me in googling the steps you mentioned for other users on the forum, so thanks for that.
Also your direct download link was helpful, as the package is not able to update from the help/update function.
Any idea why the update functionality is not working properly?
I still need another update for camera raw, for both photoshop and premiere. I found links for direct dowloads for versions 6.5 and 6.6. Also the direct links end in a crash, see attachment.
Do you have suggestions?
Regards,
Henk
Verzonden met Windows Mail
Van: A.T. Romano
Verzonden: woensdag 24 december 2014 23:58
Aan: Henk Thomassen
Premiere Elements not working
created by A.T. Romano in Premiere Elements - View the full discussion
HenkThomassen
Great news. Great job in working through the details to get to the solution.
I was waiting for more information from you so that I could give you version specific information on the how to.
But you seemed to have found the paths needed without supplemental instructions.
The two major troubleshooting tools that I would use when the Elements Organizer is involved
a. delete the psa.prf file
and/or
b. create a new catalog.
Best wishes as you move forward in your Premiere Elements 9.0/9.0.1 projects.
By the way, if you are not working from the 9.0.1 Update, good idea to do that.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
You can do that update with the program closed....do not bother with Help Menu/Update for this update. Use the link instead.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7042643#7042643 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7042643#7042643
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Premiere Elements 10 has stopped working

Actually it has not worked yet.
I just installed the Premiere Elements 10 - again, followed all the details.
My laptop is Acer Iconia 6102 dual screen touchbook
Windows 7, Intel Core i5 CPU M480@ 2.67GHz, sys mem= 4gb
Toshiba MK6465GSX disk drive, Intel HD Gaphics
The computer is new.
The dialogue says that Premiere Elements 10 has stopped working and will shut down.

This machine has only the one drive listed, nothing hidden. 512 gb free, removed some unecessary files. I did manual updates for the hardware and all software, everything is up to date. Went through the preceeding steps. There was no need to scan suorce files, I have nothing uploaded. The program will not complete its startup. The splash page pops up,dialogue flashes all the drivers and files being loaded, then quits. Does not open. The Organizer opens, but I still cant get PE to open thru it either. My computer wont allow me to change resolution. Could the fact that this machine is touch screen, dual display have anything to do with it? Using up too much resources? The resuorce monitor is idle @ 0. My Windows Movie Maker works fine.

How do I delete the audio from a video in Premiere Elements 10?

I took a video on the beach and all you hear is loud, irritating wind roar. I would like to delete the original sound and then add in musical tract on the project. Thank you for any help. I have searched the settings and right-clicked to no avail.

Rajrae
Sounds like progress. So pleased with your spirit of exploration and experimentation in dealing with the Premiere Elements learning curve. Congratulations.
But, the whys for an issue keep me asking. You should be able to right click that Premiere Elements Timeline video and see the pop up with the option to delete the audio. What computer operating system is your Premiere Elements 10 running on...Windows or Mac?
When I right click the video on my Premiere Elements 10 Windows 7 64 bit Timeline, I see the following:
You seem to be finding Show Properties in that pop up. What else is missing from it besides Delete Audio?
By any chance are you working in the Sceneline of the program instead of the Timeline. That might explain all this. In both the Timeline and Sceneline, you can get Show Properties, but it is only in the Timeline that you see the Delete Audio choice in the pop up.
Please check it out. This will be a great addition to your learning curve if this proves to be the missing point.
Thanks for the follow ups.
ATR

I have Adobe Premiere Elements 11. Everytime i go to save my finished videos to my computer or to my vimeo account, it stops working. WHY??

A message comes up saying that its not working properly and it closes.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
NOTE - McAfee kills the program http://forums.adobe.com/thread/1460089?tstart=0
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

No audio in exported video from Premiere Elements 9

I have Premiere Elements 9 and the audio works fine in my editable files in Premiere, but when I export the video directly to YouTube or to a file, the sound completely disappears. I have tried several different export settings and nothing seems to work. The sound is just gone. Any ideas why the audio works in Premiere and not in the finished files? How do I fix this? Thank you!

Welcome to the forum.
There are two places that one must choose Audio in Export/Share settings: initially, with checking Export Audio & Export Video, and then with the Multiplexing Tab, where the method of combining the Audio & Video into one file is chosen. This is the point usually missed. What is your Multiplexing Tab set to?
What happens if, when you chose Export Audio & Export Video, and set the Multiplexing to "DVD," or anything but "None," and then Export/Share to a folder on your HDD? Do you get muxed (Multiplexed) Audio & Video in one file then?
Good luck,
Hunt

When importing a clip to adobe premiere elements 11 the sound on the video doesnt appear in the audio

audio help

if7yg
What computer operating system is your Premiere Elements 11 running on? If Mac, was your purchase the Adobe Premiere Elements 11 Editor from the Mac App Store?
Be that as it may, what are the properties of the video audio file that you are importing in Premiere Elements 11?
A quick way might be for you to tell us the brand/model/settings of the camera that recorded the video audio file (including the file extension of the file).
When the file reaches the Expert workspace Timeline which is the case
a. no sound, but audio file is represented on Audio 1
b. no sound, audio file not represented on Audio 1
c. no sound, audio file represented on Audio 1 and, when you toggle the Audio Display Style to waveform, you
see or do not see a waveform.
(to the left of the word Audio 1 is a speaker icon...clicking on that icon toggles the audio track display...one of the
two choices is the waveform).
Assuming Premiere Elements 11 on Windows 7, 8, or 8.1 64 bit for now, go to Libraries/Documents/Adobe/Premiere Elements/12 and delete the complete contents of the Media Cache Files Folder that you find there. Then open the program and determine if the audio problem persists. Look to the bottom right of the workspace to observe any "conforming" activity in progress when you import the file.
We will be watching for your follow up.
Thank you.
ATR

PSE9 - audio working correctly in PSE9 is changed by Premiere Elements 9

Similar Messages

Maybe you are looking for