PST Import to archive mailbox - Stays in queue until i restart the microsoft exchange mailbox replication service

Good Day all,
Stretched dag between site a and site b.  Cas array at each site.  Mailboxes primarily are located in site a unless there is a major outage then the dag flips to site b.  setup two archive databases, one in site A on a non replicated partition
of the dag server and one in site B on a separate mailbox only server.
All exchange servers are patched to the latest sp and rollup.
site a has no issues at all, everything i import queues up and processes with no problems
at site b two imports will process and then stop until i restart the microsoft exchange mailbox replication service on the cas server.  No errors no nothing just lots of move request sitting in the queue.
considering i have an insane amount of psts to import there does anyone have any suggestions besides setting up a task to restart the imicrosoft exchange mailbox replication service every 15 minutes?
thanks for your help in advance

Yeah I know from my research when I was setting up the dag you were not a fan of the stretched DAG but it works for us really well and passed all fail over tests that we ran on it <knocking on wood>.
Yes its running but it stops working after one session.  I have had success in raising the transfer count from 2 to 5 but I can't really go much higher without taking down the server.  the problem is when I am transferring someone with hundreds
of PSTs I have to babysit it...which sucks..
anyway, thanks for your help and have a great day :)

Similar Messages

  • Exchange 2013 Mailbox Replication Service not installed

    I have two Exchange 2013 Exchange CA servers running in a HA/Load Balance environment.  Both are missing the Mailbox Replication Service.  I didn't have any errors at any point during my installation.  I look at the list of services on the
    server and they're simply not there.
    If I go to c:\program files\Microsoft\Exchange Server\v15\Bin the exe and config files are there.  I tried just clicking the exe, but nothing changed.  I need to be able to import mailboxes, so this is critical.  I'm sure it is critical for
    other reasons too.
    Anything I can do here?

    Hey,
    It's a default behavior in Exchange 2013. Mailbox Replication service runs on MBX server role. You can review architecture of Exchange 2013 on below mentioned link.
    http://blogs.technet.com/b/marwahasamir/archive/2012/08/28/what-s-new-in-exchange-2013.aspx
    Pls mark this as answer if it resolves your issue. Thanks.
    Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365

  • The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. Event 1121

    Hello all,
    We migrated our Exchange server from 2003 to 2010. After the mailbox move requests were finished we had one that was stuck. We basically skipped it as we had a lot of other things to finish over the weekend. Here we are a year later, the old exchange server
    is gone and so is an old DC. I am receiving an error every four minutes in event viewer.
    The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
    Request GUID: '3e46b7cb-2ac0-42c1-98e8-57517a19ee40' 
    Database GUID: '5c6c573b-4f45-4ce3-b296-11cf69c2e2b6'
    Error: Unable to find 'OLD Domain Controller' computer information in domain controller 'OLD Domain Controller' to perform the suitability check. Verify the fully qualified domain name..
    I have checked in EMC for move requests. None are listed. I have checked the DCs listed in EMC properties. Old DC is not listed.
    I also ran these commands in shell to attempt to cancel the stuck request.
    Get-MoveRequest -MoveStatus Completed;Pending;InProgress;Failed;CompletedWithWarning;Suspended;Queued;CompletionWithProgress : Remove-MoveRequest
    NO changes. Still throwing error. Any suggestions? I also tried using the guid and shell to look at the move request. Systems replies no such request.

    Hello,
    Please try to restart iis services to check the result.
    If the issue persists, I recommend you ping you DC server on your exchange server to check if your exchange server can communicate with your DC server.
    If there are other DCs, please try to use set-adserversettings cmdlet to specify a DC for your exchange server.
    Set-AdServerSettings
    http://technet.microsoft.com/en-us/library/dd298063(v=exchg.150).aspx
    Besides, please install the lasted rollup to check the result.
    Cara Chen
    TechNet Community Support

  • Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database 1006.

    HI all,
    I ran into a problem with one of the servers in my DAG.  Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server.  The DAG continued to function on the other server.  So this particular
    DB01 had only some test accounts in it so I removed the database copy.  Unfortunately the removal must not have completed correctly. 
    After recovering the needed space in the partition, I tried to recopy the database and it failed.  So I deleted the entire database from the active server and it successfully removed it from the active server.  Now on both the servers the database
    is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists.  I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
    of the database (failed redundancy) but there should be zero copies.
    This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists. 
    Can you point me to the location to clean this up?
    Log Name:      Application
    Source:        MSExchange Mailbox Replication
    Date:          02/25/2011 2:00:07 PM
    Event ID:      1006
    Task Category: Service
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      email1.domain.com
    Description:
    The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
    Database: DB01
    Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB    
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Mailbox Replication" />
        <EventID Qualifiers="32772">1006</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
        <EventRecordID>181576</EventRecordID>
        <Channel>Application</Channel>
        <Computer>email1.domain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DB01</Data>
        <Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB     </Data>
      </EventData>
    </Event>

    Hi
    This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases. 
    Restarting the service will clear the cache.
    Maybe it is the simplest way to solve it.
    If it doesn’t work, you can try cmd to check it.
    Get-MailboxDatabase : Can you find the database which you delete?
    Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database.

  • The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. : Error: An Active Directory Constraint Violation error occurred

    Hello,
    We have a multi domain parent child AD domain infrastructure and now we upgraded our exchange from Exchange 2007 to Exchange 2013. Since last few days, we see the below error on the mailbox server event viewer.
    EVENT ID : 1121
    The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. 
    Request GUID: '93a7d1ca-68a1-4cd9-9edb-a4ce2f7bb4cd' 
    Database GUID: '83d028ec-439d-4904-a0e4-1d3bc0f58809' 
    Error: An Active Directory Constraint Violation error occurred on <domain controller FQDN>. Additional information: The name reference is invalid. 
    This may be caused by replication latency between Active Directory domain controllers. 
    Active directory response: 000020B5: AtrErr: DSID-0315286E, #1:
    Our Exchange setup is in parent domain, but we keep on getting this error for various domain controllers in each child domain in the same site. We then configured one of the parent domain domain controller on Exchange. Still we are getting this error for
    the configured parent domain DC.
    Verified the AD replication and there is no latency or pending stuffs.
    Any support  to resolve this issue will be highly appreciated. Thank you in advance.
    Regards,
    Jnana R Dash

    Hi,
    In addition to Ed's suggestion, I would like to clarify the following things for troubleshooting:
    1. Please restart IIS at first.
    2. If the issue persists, please ping your DC on your Exchange server to check if Exchange can communicate with DC.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error

    Since demoting a child domain a few days ago, Exchange 2013 is still trying to contact it and as a result generating errors in the application event logs.  I had a similar problem which I solved by removing some old migration batches, now I have a problem
    with the Microsoft Exchange Mailbox Replication service.
    The event logged is:
    The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
    Request GUID: '0b6c0f5a-0563-48e2-8b97-e0781c6cc69a' 
    Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
    Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for
    domain 'admin.riddlesdown.local'.. --> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
    Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or
    configured incorrectly DNS server.
    The domain doesn't exist in AD Sites and Services, I have removed all traces from DNS but this is still occurring.  When I run Get-ADServerSettings | fl it reports no trace of the domain or a DC that was previously in it.
    How can I stop these events occurring and is it likely to be causing something else not to work correctly.
    We are running Exchange 2013 CU1

    No, that didn't work.  Here are more details:
    Source: MSExchange ADAccess (EventID: 2130)
    Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or configured
    incorrectly DNS server.
    Source: MSExchange ADAccess (EventID: 2119)
    Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Error DNS_ERROR_RCODE_NAME_ERROR (0x8007232B) occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain admin.riddlesdown.local
     The query was for the SRV record for _ldap._tcp.dc._msdcs.admin.riddlesdown.local
     Common causes of this error include the following:
     - The DNS SRV records required to locate a domain controller for the domain are not registered in DNS. These records are registered with a DNS server automatically when a domain controller is added to a domain. They are updated by the domain controller
    at set intervals. This computer is configured to use DNS servers with following IP addresses:
    10.59.100.7
    10.59.100.8
    fec0:0:0:ffff::1Microsoft.Exchange.Directory.TopologyService.exe
    fec0:0:0:ffff::2Microsoft.Exchange.Directory.TopologyService.exe
    fec0:0:0:ffff::3Microsoft.Exchange.Directory.TopologyService.exe
     - One or more of the following zones do not include delegation to its child zone:
    admin.riddlesdown.local
    riddlesdown.local
    local
    . (the root zone)
    Source: MSExchange Mailbox Replication Service (EventID: 1121)
    The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
    Request GUID: '87f4b926-0621-43d3-afeb-fe475ee6d850' 
    Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
    Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
    --> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
    Something is cause the Exchange server to go looking for our old domain, but what and why?

  • About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it?

    About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.

    Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
    Russ

  • The Microsoft Exchange Mailbox Transport Submission service terminated unexpectedly

    Hi, I get following error on my new Exchange 2013 server:
     It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service.
    Mailbox database is mounted and contains mailboxes (also system mailbox), ipv6 is enabled on the exchange server.
    Is there any logging I can find to see what's going on actually? The transport service won't start either.

    Hello,
    Could you please check the application log and let us know the related event ID and its details?
    Thanks,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • New windows 7 pc,have updated my itunes to newest version. All purchases are on screen as being on the cloud but when I download the files, they stay in place until I shut the computer down. on restart, they 'cannot be located' any ideas?

    This is really annoying me. I have a new pc. running windows 7. All my media is showing as 'on the cloud'. I don't always have access to internet so I want the files on my pc. when I download from the cloud the songs play but seem to dissappear when I restart the pc. says file cannot be located and the file dissappears from my flashdrive I have it stored on. What am I doing that's wrong??

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Exchange PST Import tool to 2010 online archive fails

    I get this error below when trying to use the PST Capture Console to import directly to the user's on prem archive.
    Import error: Mailbox [email protected] has no archive mailbox
    Works: PST import to the user's regular mailbox works 100%
    Does not work: PST import to archive mailbox for same user. Online archive is active for the same user.
    More info:
    On site exchange 2010 SP1 with archiving enabled for this user.

    Hi ,
    Please run the following and verify if archive is enabled.
    Get-mailbox | where {$_.ArchiveDatabase –ne $null} |ft name, archivename
    Wendy Liu
    TechNet Community Support

  • Migrate mailbox from Exchange 2007 to Exchange 2013, mailbox stay in queue

    Hi,
    I'm trying to migrate a mailbox but the request is staying in queue, according to : Get-moverequest | Get-Moverequeststatistics
    Configuration server Exchange 2007 SP3 :
    Domain : test.com
    OS : Windows 2008 server SP2 (not R2)
    Firewall : OFF
    Exchange roles are on separate three  servers : CAS - MAILBOX - HUB.
    Configuration Server Exchange 2013 :
    Domain : new.com
    OS: Windows 2012 R2
    Firewall : OFF
    This environment is on a closed network unable to reach internet.
    I have try to restart the Replication service, but it didn't worked.
    I've searched a lot but i can't find any information to help me. The mailbox stays in queue....
    Anyone ever had this issue?
    Thanks you and have a nice day.

    Hi ,
    Based on my knowledge below things need to checked.
    1.Please check the content index state of the target database is healthy and ensure the entire mailbox database status was in healthy state.
    2.If your exchange 2013 is an single server and target database copy doesn't have the second copy then we need to set the below parameter value to none.
    DataMoveReplicationConstraint : None
    Note : After the above change ,Microsoft exchange mailbox replication service needs to be restarted.
    3.Restart the Microsoft exchange mailbox replication service and check the results.
    4. Have you tried moving the same mailboxes to the different databases.
    5.If the move request is in the failed state then we can export the details of the move request to find out the exact cause for the failure.
    Get-MoveRequestStatistics -Identity "nithya" -IncludeReport | fl >c:\nithya.txt
    Please feel free to reply me if you have any queries.
    Thanks & Regards S.Nithyanandham

  • Microsoft Exchange Server/Exchange 2010/Mailbox/Database Copy Mounted

    Good Morning everyone!!!
    I Have SCOM 2007 R2 CU5 Envoirnment and i am monitoring Microsoft Exchange 2010 SP1 Messaging infrastracture,
    I have Microsoft Exchange  2010 SP1 Monitoring MP, MP version is 14.2.71.0.
    Case:-
    When exchange is having issue with DAG, SCOM monitoring rule:- KHI: The database copy is not mounted on the local server. Another database copy may be mounted on a different server.
    is generating the alert but alert Description is only "    _ef4a8515_1cc0_48a9_aa12_92ba059a6eae_ " and rest of the things are blank
    and because of this ticketing team is unable to process these alerts,
    Impact:-
    Whenever DAG is unavailable, messaging team is not getting notification and because of this. Exchange services are failing down,
    Does anyone having this kind of issues on their exchange environment?
    I am looking solution for this issue, please let me know if anyone is aware about this.
    Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

    Does anyone has updated information regarding Exchange 2010 DAG monitoring fix, <o:p></o:p>
    As i see there was exchange MP release on 31st Aug 2012
    ID
    Name
    Targets
    _ef4a8515_1cc0_48a9_aa12_92ba059a6eae_
    KHI: The   database copy is not mounted on the local server. Another database copy may   be mounted on a different server.
    Root   Management Server
    _EF51D339_22C5_49b3_8B6B_25002BE31D4A_
    KHI: Retry   Mailbox Delivery Queue Length - sustained for 90 minutes - Red(>1) - Hub   Transport.
    Root   Management Server
    _93558cf0_e063_45b1_b57a_0d4b53e0d615_
    KHI: The   Microsoft Exchange Information Store service (MSExchangeIS) isn't running.
    Root   Management Server
    My monitoring is affected for these rules which i mentioned below, here alerts
    information is shown as rule ID instead of Rule name. and we don’t get alert description
    for above rules when the generate alerts.<o:p></o:p>
    Response would be appreciated <o:p></o:p>
    Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

  • MSExchange Mailbox Replication warning

    Hello All,
    Looking for some help here.
    Getting these warnings that are referring to a recovery database that was created to restore a mailbox and has since been removed.
    The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
    Database: Missing database (026eca3b-2899-4c05-9bea-cbc5736fd93a)
    Error: Database '026eca3b-2899-4c05-9bea-cbc5736fd93a' doesn't exist.
    Simple environment, single mailbox server, no DAG at this point..
    What am I missing?
    Thanks,
    Jason

    Hi Jason,
    As S.Nithyanandham suggested, please check if the problematic database is removed cleanly using ADSIEdit, since the Microsoft Exchange Mailbox Replication service is still looking for it. If the problematic database exists in ADSIEDit, remove it and then
    restart the Microsoft Exchange Mailbox Replication service and check the result.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • TS3355 I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

    I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

    It depends on the type of video. iMovie will only import video that it can edit.
    In general, you would use FILE/IMPORT MOVIE...

  • Jobs stay in queue and keep printing until you cancel them--then stops the print spooler...why?

    My Printer: HP Photosmart C309a
    My  Laptop: HP G71 series
    Operating System: Windows 7 (64 bit) but runs a lot of stuff on 32 bit
    Problem: I print ONE copy of a multiple page document in Adobe Reader 9. I select even pages only (after which I would reinsert the pages and tell it to print odd pages only, to get the other side). The printer makes a sound indicating the job is finished, I remove my pages to collate them, and then the printer continues to print the job again without so much as a keystroke.
    Naturally, you find the printer in the devices on the control panel, click "see what's printing" and highlight the job and cancel it.
    Then somehow it turns off my print spooler. 
    I have tried everything suggested on other forums, like
    restart the laptop/restart the printer
    going to c\windows\system32\spool\printers and deleting whatever is hung up in there (usually a shockwave file).
    Going to Services\print spooler \properties and making sure the settings are set to automatic
    Uninstall\reinstall latest driver and software
    Switching from Adobe Reader 10 to Adobe Reader 9
    Use System Restore to try to reset the system to a previous state.
    Run Trend Micro to check for viruses and spyware--nothing shows up.
    I am positive the pdf doc is NOT the problem, because I can print it on my husband's laptop multiple times over with no problems.
    Does anyone have this problem as well? Has anyone found a genuine solution other than manually canceling print jobs in queue and constantly restarting the print spooler?
    Thanks in advance for any suggestions.
    --Holly

    Hi,
     I believe your printer is wirelessly connected to your computer, right?!
     What's the current printer software version installed in your laptop computer?! 
     to see: click start>control panel>uninstall a program under Programs then it will tell you the software version like HP Photosmart c309a v13 or v14.
    If the software version is v13, click here to download and install the current software.
    IF all things still fail, try to use the workaround provided by HP in this link. It says:
    Workaround
    Your HP printing product can operate sufficiently using an alternate print driver, although there might be some limitations. For instance, some buttons on the product control panel might not function, but the product prints normally from the computer. If the solutions in this document do not solve the issue, download and install an alternate print driver.
    Follow these steps to install the HP Deskjet 990C print driver.
      NOTE:  These steps install the new print driver using the same port that the product already uses. The product functions normally with multiple drivers on the same port.
    Find the port that the product already uses.
    Click the Windows icon ( ), and then click Control Panel . The Control Panel opens in a new window.
    Click Hardware and Sounds .
    Click Printers . The Printers folder opens.
    Right-click the product icon ( ), and then click Properties . The Propertieswindow opens.
    Click the Ports tab. A window opens with a list of ports. The port for the product has a checkmark or a highlight.
    Note the name of the port indicated for the product.
    Close the Properties window, and then continue with the next steps.
    Click Add a Printer in the menu bar at the top of the Printers window. The Windows Add Printer Wizard opens.
    Click Add a local printer .
    Select Use an existing Port .
    Click the drop-down menu next to Use an existing Port , and then select the port that you noted earlier in these steps.
    Click Next .
    In the Manufacturer pane, click HP .
    In the Printers pane, click HP Deskjet 990c , and then click Next . (IF YOU CANT FIND DESKJET 990C, JUST CLICK WINDOWS UPDATE WITHIN THIS WINDOW. THEN FIND DESKJET 990C and then click next)
    Type a name for the new printer in the Printer name box, or keep the default name.
    Select Set as the default printer , and then click Next . A window opens with a progress bar as the printer installs. Then a new window opens.
    Click Do not share this printer , and then click Next .
    If you want to print a test page, click the Print test page button.
    Click Finish to complete the driver installation.
    Try printing again, but select HP Deskjet 990c from the Print dialog box.
    If this solves the issue, follow these steps to use the HP Deskjet 990c print driver whenever you send print jobs to the product.
    In the program you are using, select the option to print. The Print dialog box opens.
    Click the Name drop-down menu, and then select HP Deskjet 990c .
    Change print settings as desired in the Paper size , Quality , and Paper type drop-down menus.
    Select the Print range and Copies options as desired.
    Click OK . The product prints the file.
    Kiko

Maybe you are looking for

  • How to create a mail-only user

    In WGM I need to have several users that have access to an e-mail account only, they never should get ftp access (or even terminal SSH, telnet, etc.). So I solved this (at least I think so) by doing the following settings: (1) "Accounts" section, con

  • Scenario planning and accruals

    hi experts, is there any configuration/customizing needed for the "Accruals" for Scenario Planner? If so, what are the steps and where are they done? If nothing needs to be done, then how do test for the Scenario Planner?

  • Cisco Catalyst 6500 Supervisor Engine 2T Baseboard

    Morning Guys i have just bought a Cisco 6506-E Chassis, it came out with only the SUP2T Engine on slot 5, i have already stacked 3 switches (3750-X) as my core, i want to replace them with the chassis the problem now is my company doesn't have money

  • Robohelp project not opening

    I was working on a Robohelp 8 project and when I clicked Save All, the RH project hanged and became Not Responding. I closed and reopened the Project, and my whole computer hanged along with the project. So I forcefully shut down the computer using t

  • Radio button in table maintainenance

    HI Experts, In table maintenance view of a table i want to see one field as radio button and want to have checked for one of the entries out of the set of entries. My table contain four field. Key1 key2 nonkey1 nonkey2 I want to have nonkey2 as X for