PST is not an Outlook data file error coming while opening the Outlook

Hi,
Suddenly my outlook is showing the .pst file is not an Outlook data file error while starting. No big changes was made to the system to cause this. I had upgraded the IE version to 9 the same day. Done lots of trouble shooting but still not able fix my pst
file to work. My all mails are in that pst and there is no backup for it.
I am using Office Outlook 2007. I have already tried the following to make it work bu failed each time.
1. Tried to repair the .pst file using scanpst tool in the system, but closed due to an unexpected error at the Phase 6.
2. Successfully completed the repair using the scanpst of another Outlook 2010 system and added the pst back to my systems Outlook but it had only an Inbox folder in it which was empty.
3. Tried to repair the using other third party software's but none came successful.
Please let me know anything can be done for to make my old pst work again.
Sanjay
Avatar of Sanjay Oyitty Sanjay Oyitty

Hi,
What's the size of that .pst file?
Right click on the file and click Properties, make sure there's no
Read-only Attribute. Then we can run Scanpst.exe again to check the result again:
http://support.microsoft.com/kb/272227
Regards,
Melon Chen
TechNet Community Support

Similar Messages

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

I am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/rirefox/components/ref helper.JS:510 in English

i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

"An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint."

In PowerPoint 2013 on Windows 7 - 64 bit, when
File / Save as is selected, an error message comes up stating, "An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint." This is an intermittent issue and also
affects Excel 2013. I have tried repairing it, done windows update and also uninstalled and reinstalled but no luck. I have researched this issue but it relates to Office 2007 and 2010 and the resolution does not support 2013.
Has anyone come across this issue? If so how did you resolve it?
Many thanks….

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

BootCamp Assistant Error : Your bootable USB drive could not be created. "An error occurred while formatting the disk."

I have a Windows 7 Ultimate .iso file saved onto a "Mac OS Extended (Journal)" formatted USB flash drive. I am trying to install it with BootCamp Assistant and I keep getting the error message : Your bootable USB drive could not be created. "An error occurred while formatting the disk."
I have previously installed Windows 7 on my Mac (and it worked flawlessly - same .iso file), but I uninstalled it because I didn't partition enough space on my hard drive. I have used several flash drive to try and install and none have worked.
Some help would be greatly appreciated.

The Boot Camp forum is located here: https://discussions.apple.com/community/windows_software/boot_camp
The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/

Received a pdf by email, when i attempt to open it, I get the message "File Error-couldn't open the file", is there some way I can open it? Thanks, Graham

Hi,
Received a pdf by email. When I attempt to open it, I receive the message, "File Error- Couldn't open the file", is there any way I can open it?
Thanks,
Graham

Are you using Adobe Reader or Preview to view the file? Can you get the sender to resend the file?
 Cheers, Tom

An error occured while opening the connection: Object reference not set to

After I uninstalled Oracle Developer Tools for Visual Studio .NET 10.1.0.4 and installed Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.21 I got the error message below when I want to connect to my 10g database using Oracle Explorer.
Error:
An error occured while opening the connection: Object reference not set to an instance of an object
I use OracleConnection to open also cannot be done. But I use Oracle SQL Developer I can connect to orcl that I cannot connect using ODAC 10.2.0.2.21 in my laptop.
Please help me.
Ming Man

Sorry my mistake, I double checked, the one I uninstalled is ODAC 10.2.0.2.20 and not ODAC 10.1.0.4.
But I have that error.
Ming Man

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

Error coming while activating the data request at DSO level

Hi to all,
please can anybody tell me the solution for that.
While activation the data request at DSO level , i am getting error .
Value 'R2S-11.60UML ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
Process 000001 returned with errors
this error is coming under SID Generation .
I shall be thnakfull to you for this.
Regards
Pavneet Rana

Hi Rana,
Activation failed because of the special characters in the Omaterial
Delete the request in target
edit it in the specific record in PSA and load it back
In your case i think its a space problem u can see a space after L
delete the space for the record and load it again
Regards,
MADhu

An error occured while opening the file..

Flash CS5 crashed and this is the message i got.
I tried the .zip and rar method to fix it.. but didnt help. When i change the extension to .zip.. it wont even open. unable to see the library files. i also tried the DiskInternal Zip fix.. didnt help.
Can anyone help me.. kind of urgent.
and Adobe team.. get your S together please. We lose a lot of hours of work because of your ****** errors.
I uploaded the file here. Any help is greatly appreciated.
http://speedy.sh/Y2YGb/MA-Flash-v2.fla

Ya I beleive my flash .fla file is a gonner

Error coming while schedle the job in OWB10gR2

Hi , I have done one pre schedule job in OWB and assigned that job to one Map named by newone. but its not working as per schedule and when manually start the exec of map it gives an error .
anybody can tell why scheduling gives an error such that
"SCOTT.MMB_NEWONE_JOB" has an invalid END_DATE
ORA-06512: at "SYS.DBMS_ISCHED", line 731
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1158
ORA-06512: at line 1

Duplicated thread at schedule option in owb10gR2

After 11.5.10.2 Upgrade, error coming when open the form.

Hi Experts,
After upgrading application from 11.5.8 to 11.5.10.2(successfully applied u3480000.drv),
when try to open the form it gives error like
"Illegal Constant pool type", when applet loading,
I tried to open the form like
http://hostname.domainname://port/dev60cgi/f60cgi/
still im getting the same error, i cant able to open the forms,
Apache Error log says like
"Client denied by server configuration"
Please advice me to solve this issue.
Thanks
R.Sundaravel

Hi,
Please verify that you have no invalid objects.
"Illegal Constant pool type", when applet loading, Clear the server cache, bounce the services and check again.
Apache Error log says like
"Client denied by server configuration"Review this document and see if it helps.
Note: 748228.1 - Unable to Login. Page Can Not be Found Error When Connecting Via Appslogin
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=748228.1
Regards,
Hussein

Error coming while activating the project

I am using HANA studio with UI5 plugins. I have created a new SAPUI5 Application project.
When after sharing the project i try to activate it. It shows me an error as shown below.
Please suggest what is the issue.
Thanks,
Vishu Agarwal

Hi Vishu,
You can try to change the description in index.html file as shown below as the error shows it supports only UTF-8.
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>

My PC show error 9026 while opening the i Tunes

while opening i Tunes on my PC, error 9026 is displayed saying that Quick Time has not installed.

Just double chcking, is 9026 the correct error number. Error 2096 is quite common.
Secondly do you have Quicktime isnalled and working on your PC even though iTunes thinks you don't, or is Quicktime not working?

Error coming while opening T.code CIC0

Hi friends,
while opeining the CIC0 T.code system showing the below error pls suggest me how to rectify it
"error when determining the-- "CONTACT_SEARCH_CONFIGURATION profile for agent "
Regards
Ramakrishna

Hi Ram,
In this case, could you please let me know the complete Component Configuration of your CIC Profile and also the components of the Framework Id which you make use of ?
Please also check in your Framework ID -> Visible Components, whether you have maintained any Component Container ?
Thanks & Best Regards,
Vinod

PST is not an Outlook data file error coming while opening the Outlook

Similar Messages

Maybe you are looking for