Public role in Rooms

Hi everybody,
I want to know if the collaboration rooms works as it follows:
If you use the role public and you create a public room the user that gets in will have the initial role, however if the room is set full access the user will get the public role.
In short,
Room with Full Access = Public Role
Room without Full Access = Initial Role
Is this ok?
If this is correct, is there anyway to set full access automatically?programmatically?
Thanks in advance.

Hi,
don't confuse the room role named "public" with the room access type "public".
A public room works in this way: Everybody can enter the room and gets member of the room automatically. Automatically the initial room role (e.g. Member) is assigned to him.
With the room role pubic you define the public content of a room. This is content which can be accessed without being member of the room. Normally public room content only makes sense for restricted rooms. (because private rooms are not listed for non-members and public rooms are public anyway).
Regards,
Sascha

Similar Messages

  • Public Area in Room Template

    Hello,
    I created a room template which doesn't contain a public area. This works fine. Now I want to create a room template with public area. Therefore I copied the template without public area and tried to modify it. I changed the parameter <b>Access</b> from <i>private</i> to <i>public</i> in the <b>cmRoomExtensionSP2FP</b> extension for the documents. But I can't see any changes. The room does still not have a public access. Does anybody know,  what the problem is and what further steps I have to do?
    Regards,
    Dominik

    Hi Dominik,
    you should also assign one or several pages to the public-Role
    Hope this helps
    Karin

  • SQL 2000 public role

    Hi~ When we create a new login on SQL 2000 server. It will DEFAULT group into 'public' role on Database master, msdb,.......
    is it possible to take out the new login from the role 'public' of msdb ??

    Thats a default role, you can revoke access it.
    Also, if you want to check assigned permissions to public role than use below query:
    SELECT o.name AS
    [Object], p.permission_name
    AS [Type]
    FROM sys.all_objects o
    INNER JOIN sys.database_permissions p
    ON o.object_id = p.major_id
    INNER JOIN sys.database_principals u
    ON u.principal_ID = p.grantee_principal_id
    WHERE u.name =
    'public'
    Refer below article:
    http://www.sqlservercentral.com/blogs/basits-sql-server-tips/2013/04/04/the-public-role-do-not-use-it-for-database-access/

  • OC4J PUBLIC Role

    Per 10.1.3.1 documentation "OC4J supports a mode where any authenticated user is allowed access to a given application or resource..."
    I've configured orion-application.xml with a custom login module, and set the public.group property to a PulicUsers group, which is mapped to a PublicRole. My J2EE descriptors (method-permission in ejb-jar.xml and security-role-mapping in orion-application.xml) all grant PublicRole access to web/ejb resources. I also have a namespace-access element in orion-application.xml granting read access.
    At runtime the custom login module authenticates 'someUser' and adds a PulicUsers principal to the subject. However, I get a security exception:
    Caused by: oracle.oc4j.rmi.OracleRemoteException: someUser is not allowed to call this EJB method, check your security settings (method-permission in ejb-jar.xml and security-role-mapping in orion-application.xml).
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.checkRuntimeSecurityRole(SecurityRoleInterceptor.java:77)
    <SNIP>
    Has anyone had success using a custom login module and public role to access EJBs?
    Thanks,
    Gerald

    OK, I added the user & role to the default jazn.com realm using the admin GUI, and verified that they were in the system-jazn-data.xml file.
    I added the following to my orion-application.xml:
         <jazn provider="XML" />
         <jazn-loginconfig>
              <application>
                   <name>MyApp</name>
                   <login-modules>
                        <login-module>
                             <class>oracle.security.jazn.login.module.RealmLoginModule</class>
                             <control-flag>required</control-flag>
                             <options>
                                  <option>
                                       <name>addAllRoles</name>
                                       <value>true</value>
                                  </option>
                             </options>
                        </login-module>
                   </login-modules>
              </application>
         </jazn-loginconfig>
    When I use the LoginContext to invoke the login module I get three callbacks: name, password an a JAZNContextCallback. I supply the name, password and am not sure what to provide the third callback, so I ignore it.
    Authentication fails with a javax.security.auth.login.FailedLoginException
         at oracle.security.jazn.login.module.RealmLoginModule.authenticate(RealmLoginModule.java:131)
    What am I missing? Do I have to assign the role some permission? Or do I need to supply the JAZN callback some information?
    Also, is there any way to get more detailed logging from the RealLoginModule into the log.xml file? That will definitely help.
    Thanks,
    Gerald

  • To find which packages the PUBLIC role has execute privileges on

    Hi Experts:
    I need to find which packages the PUBLIC role has execute privileges on, since an Audit has revealed there are "there were execute privileges on 2 packages granted to the PUBLIC role"
    How can I find these? I have queried, in different ways, dba_tab_privs and dba_sys_privs but I cant get a way to see
    execute privileges on packages / procedures.
    Thanks,
    10.2.0.4
    Linux RH 4.
    Edited by: user11981168 on 30-Apr-2010 04:12

    SELECT table_name
    FROM dba_tab_privs p
    ,dba_objects o
    WHERE p.owner=o.owner
    AND p.table_name = o.object_name
    AND p.owner = 'SYS'
    AND p.privilege = 'EXECUTE'
    AND p.grantee = 'PUBLIC'
    AND o.object_type='PROCEDURE'; --PACKAGE,FUNCTION                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Why couldn't assign group to a role in room by addGroupUsersToRole

    Hi Guys,
    i used "addGroupUsersToRole" and wanted to assign group to role, it shows me result "true", but when I check room ->meber, the group are not assigned with role?
    What could be the problem?
    Thanks for any advice!
    Regards,
    Liying

    A "computer-to-computer network" is not the same as the "Internet Sharing" feature of OS X. It sounds like your trying to share your Internet connection with both computers. A C2C won't work for this purpose. It's primary intent is to share files between computers on a AdHoc local wireless network.
    If what you really want to do is share an Internet connection, you will want to use Internet Sharing. For this to work you must have at least one computer attached to the Internet via either Ethernet or wirelessly. In turn, this computer would share this Internet connection with the "opposite" port (wired if wirelessly and vice versa) to the another computer.

  • Public/Role Based Lists

    Do you know if/how it is possible to create a new role based list and assign that list to multiple roles (keeping the same/identical name)?
    For example I want to create a list named Open Opportuntiies. I want to use slightly different criteria and create the same named list for just roles 2 and 3 ... and assign the original one to role 1 only. Can this be done? Seems that the list name must be unique. Is that true?

    Hi,
    Yes the list name has to be unique. You'll need to create different list names here
    Thanks
    Oli @ Innoveer

  • Role in Collaboration Room

    Hi
    I have duplicated the Collaboration Room Template "SAP_Information_Site" and created a new CR based on the duplicated template. Three roles are defined in that template: admin, content manager, public
    I assigned my own admin-user the admin-role in this CR.
    But every other user entering this room has automatically been assigned to the "content manager"-role, although he should be assigned to the "public"-role! I always delete the user from the Member-list in the Administration of this CR. But everytime the user enters the room, he´s assigned to the content manager-role again!!!!
    Can anybody help me?
    We´re on SAP EP 6.0 SP 13
    Thanks
    Sven
    Message was edited by: Sven Keller

    Hi Vasu
    Sorry, but that url doesn´t help. I know the procedure of assigning PORTAL (!!!) roles. The problem is, that within the collaboration room the ROOM (!!!) role "content manager" is assigned
    autmatically to EVERY user entering the room. I can´t control that.  
    Normally every user should have the room role "Public"!
    Regards,
    Sven

  • How to make a table of the user to non public privilege?

    Hi all,
    im working with an RAD program and using oracle as the database. currently im on db 10g. I am able to connect to the db but the problem is it shows other users table. It is not only showing the tables of the user i connected to.
    this is a problem since it will load other users' table which i dont need in my project.
    now i've post around the forum of the RAD program regarding this and a particular user mentioned that he had the similar problem and it's probably because the all those tables showing up is public.
    im getting tables from sys,sytem,syman and other preinstalled db user which i dont need to list out for my project.
    is there really a condition where these tables are public? if so, how can i change it to private? any appropriate query would help.
    i dont want it to show up on my RAD program all those unnecessary tables when i connect to one user for example user1.
    anyone can help me out?
    Thnx.

    T101_cyberdyne wrote:
    Balazs Papp wrote:
    in Oracle, there is a special role, called PUBLIC
    anything granted to this role will be applied to every user (obviously, its PUBLIC)
    for example SYSTEM.HELP is a "public" table, every user can read it without any permissions granted
    you can check this with a query like this:
    select * from dba_tab_privs where grantee='PUBLIC' and table_name='HELP';
    revoking such permissions from the PUBLIC role is not recommended at all, as they are required for basic operation
    disabling the PUBLIC role for a specific user is not possible as per the following note: Is it possible to exclude a user from PUBLIC scope? [ID 156303.1]So are you saying i'm stuck and there's nothing i could do to prevent these public table from showing?
    well,this is dissapointing.I guess you need to step back and ask why this is a "problem". So far you've only indicated that you consider to BE a problem, but not WHY. Perhaps you are starting from a flawed assumption.

  • How to create pre-defined folder in the document sharing iView in a room?

    Hi everyone,
    As title, I would like to know how to create some pre-defined folder(s) in the document sharing iView in a collaboration room?
    Hope you someone can help me~~
    Thanks and best regards,
    Marcus

    Try it like this:
    Help with collaboration rooms templates
    and here are soem of those docs:
    http://media.sdn.sap.com/public/KMKeywords/Collaboration-Room.html
    Regards,
    Darin

  • Portal content for the room.

    Hello,
    We created a new Room in portals for collaboration. I then added a user to this room, but not as an owner.
    Both the owner and the user of the room can see the room from the role Collaboration -> Room Directory. But once we click the room there is no way to collaborate on the content. This is however not a problem with the previously rooms. This problem started when we migrated from NW2004 sp16 to sp17.
    Has anybody experienced this issue before. Would you know how I can get the New>, or the New Folder> links so we can collaborate on the rooms.
    Thank you for the help.
    Best Wishes
    Sumit.

    Hey Irina,
    This problem persists. We have since created new rooms and asked the users to collaborate again. We slowly try to move the old content from the directories back to the new rooms.
    Hope that helps.
    Sumit.

  • Public, Server Permissions, and Endpoints

    I am seeking a good discussion of how to handle the impact of revoking connect to endpoint permissions for the public role. Up to this point, I've encountered several resources, including the Microsoft documentation, that recommend removing all server
    permissions from public. I find this amusing due to the fact that all other logins inherit their permissions on the various endpoints from public. Of course, if I revoke connect for the endpoints from public, only system administrators can connect.
    None of the sources that I've found address handling this issue. This reminds me a bit of the old South Park episode with the Underpants Gnomes and their business plan: Step 1 - Underpants, Step 2 - ?, Step 3 - Profit! In this case, it is
    Step 1 - Revoke rights from public, Step 2 - ?, Step 3 - Security!
    There is a comment on the SQL Server 2008 on-line documentation that recommends granting connect to endpoint to specific logins, but it does not supply any detail. I understand that Step 2 is highly dependent on factors that vary from location to location,
    and application to application.
    My question is whether there is a resource that details the considerations for granting connect to endpoint for the various endpoints and logins? I am looking for answers to questions like:
    Is there a case in which one would have a login that was not granted connect to any endpoint?
    Do logins like ##MS_PolicyTsqlExecutionLogin## need these rights, and if so, to which endpoints specifically?
    I have a number of others, but I was hoping someone could provide me with a resource from which I could draw this information without having to chase all over the documentation. Thanks in advance!

    Rick,
    First, thanks so much for the helpful reply! It validates what I was thinking.
    For versions 2008, 2008 R2, and 2012, if you follow Administer Servers by Using Policy-Based Management -> Monitor and Enforce Best Practices by Using Policy-Based Management -> Server public Permissions, it advises, "Do not grant server permissions
    to the server public role." The links below are for the 2012 version of this page:
    http://technet.microsoft.com/en-us/library/cc645930.aspx
    http://msdn.microsoft.com/en-us/library/cc645930(v=sql.110).aspx
    You and "Quantum John" are listed as authors of a comment on the 2008 version of this page (http://technet.microsoft.com/en-us/library/cc645930(v=sql.100).aspx) that acknowledge
    this problem. The last part of that comment is:
    However, as mentioned in Harry Zheng's post on Dosql (http://dosql.com/cms/index.php?option=com_content&view=article&id=96:sql-server-best-practice-policy-public-not-granted-server-permissions&catid=40:microsoft-sql-server&Itemid=41),
    executing the following command:
    REVOKE CONNECT ON ENDPOINT::[TSQL Default TCP] FROM public
    while best practice, is nevertheless liable to get you in deep trouble on a production server unless you also execute:
    GRANT CONNECT ON ENDPOINT::[TSQL Default TCP] to [loginname]
    for each of your logins, because without this, no-one except sysadmins will have permission to connect to your instance via TCP.
    It refers to performing the revoke connect on endpoint as best practice, which we agree is arguable. Unfortunately, Harry Zheng's post is a dead link. None of the later editions of this page are commented on in any way.
    Further, the policy referenced by this documentation, "Public Not Granted Server Permissions," is distributed with SQL Server and evaluates @PublicServerRoleIsGranted. It flags this policy as failed if any connect to endpoint is granted to public.
    Fortunately, I'm one of those that insists on testing before moving forward with any change. I also cannot leave gaps in my knowledge unfilled, which is why I posted. Again, thanks for the assistance!

  • After revoked UTL_FILE from PUBLIC, found problem...

    Hi All
    I created new role that is "UTL_PUBLIC" and granted below package to new role and grant new role to all users in database after that revoke below roles from PUBLIC.
    UTL_FILE
    UTL_TCP
    UTL_SMTP
    UTL_HTTP
    DBMS_LOB
    DBMS_SQL
    DBMS_JOB
    DBMS_SCHEDULER
    DBMS_XMLGEN
    But I got the problem when export data that show about package error. So I granted above package back to PUBLIC and export again that was work.
    My question is Can I grant above package to new role and grant to db user instead of PUBLIC role? If yes, How will I do ? If no, please explain the reason.
    Thank you,
    Hiko

    Oracle support confirmed about this already.
    I cannot grant privilege execute on those packages via roles that will have troubles with procedures and packages.
    Only one solution, I must grant to users directly.
    Thank you
    Hiko

  • Changing Layout for Room Directory

    Hello All,
    I need to change the Layout for Room Directory,
    For this,i did,
    1) KM -> CM -> User Interface -> Settings -> Layout Set -> Search for Room Directory(Taking duplicate and named as Room Directory 1) -> Changed the Display Properties for private, public and restricted Rooms.
    2) Changed the Layout Settings Property for the Room Directory iView.
    But it is not reflecting, anything has to be change?
    Regards,
    Mythili

    Hi,
    From the link, I posted you can see that the folder settings take precedence over IView settings (Exception: Layout Set Mode Force).
    Check this to define layoutset on the folder:
    http://help.sap.com/saphelp_nw70/helpdata/EN/7d/24e13d8ee4535ee10000000a114084/frameset.htm
    The problem here is that your folder already has a layoutset defined on it and this takes precedence over your IView settings. So either you set your new layoutset on folder or remove exisiting layoutset of the folder so that your iview settings take precedence.
    I am not sure why IView settings Layout Set Mode Force, does not exist on RoomDirectory IView, if set to this mode then IView settings are taken even layoutset on folder exists.
    Regards,
    Praveen Gudapati

  • PUBLIC pseudo user

    select table_name, grantor, privilege from dba_tab_privs where GRANTEE='PUBLIC';
    If we run this query, we can see so many privileges given to pseudo role PUBLIC.
    And also by default, all users have the privileges which are given to PUBLIC. If we connect to the database useing 3rd party tools, like the BO XI, it shows all the schemas and the privileges which are there with PUBLIC.
    can we do something in which, the users dont use the privileges granted to PUBLIC.
    thanks!

    thanks a lot! it sounds great!
    the thing is that in business object, they have a kind of universe, where they create roles and sub roles and integrate it to the WINDOWS AD. so the users of the active directory have automatically the privileges assigned at the BO level.
    that is the middle tier..
    at the database level, i have created a user for the BO as BOE and gave SELECT privilege on some objects from a schema. Apart from these SELECT privileges on 50 objects in a schema, the only other privilege given to BOE is CONNECT.
    so as far as oracle database is concerned, there are only
    SELECT on 50 OBJECTS in a schema
    CONNECT role
    Now when we connect the user from the BUSINESS OBJECT, we can see a whole bunch of tables from SYS, DBSNMP, CTXSYS, ALL_ and USER_ views.
    so i was shocked, that when i gave only SELECT on 50 objects, how come the user can see all teh tables and views from almost all the schemas in the database.
    Then from my search, i think it is because of the privileges given to the PUBLIC role which is automatically granted to all the users, it could see all that...
    so i just wanted to restrict those views to the user BOE, so that it should not see more than what i give him the privileges.
    thanks!

Maybe you are looking for

  • Letting 2 albums follow up on eachother, how?

    Hey, Does anyone know how I can make 2 different albums follow up on eachother? For example: Album 1 stops with Last Song Album 2 starts with Next Song. On the Ipod Touch, songs end at the end of an album, and don't start with the first song of the f

  • Back to School Promo Questions

    Hi I will be getting a Macbook during the back to school event, but I am wandering if anyone knows what date it might start this year, and if you can buy through that site during that time or have to go to the Apple store?

  • Organisation Management (OM) in ABAP-HR

    Hi all, Will anybody please give me idea/link on Organisation Management (OM) in ABAP-HR. Anirban Bhattacharjee.

  • New report with Painter/Writer

    Need some reminder, since was using Painter/Writer long time ago... Standard project reports have an hierarchy window for navigation on the left hand side. Instead of that navigation I would like to have a project id listed in the first column with o

  • 10g ODM access from jDev 9x?

    I'm wondering if DM4J 9.0.4 working in JDeveloper 9.0.4 is compatible with the 10g database ODM components? If not, how does one work with 10g ODM prior to the release of 10g client components? thanks.