Publication is not listed in reolication monitor after manual database failover

Hi All,
I have three servers using which I have configured database mirroring and transactional replication with pull subscription.
ServerA--Publisher/Distributor/principal
ServerB--Subscriber
ServerC--Mirror
After failover now ServerB pulls the data from ServerC which is the new Principal andI have set the -PublishfailoverPartner as ServerC .
After the failover is performed I see subscriber is pulling transactions from ServerC and transactions are getting replicated but I cannot see the publication listed under new publisher(ServerC) nor under old publisher ServerA from replication
monitor.
What is the reason I cannot see the publications from replication Monitor. How will distributor know that ServerC is now the publisher.
Also I got the error when I executed below command for distribution agent. But still transactions are getting replicated after failover.
exec
sp_add_agent_parameter@profile_id
= 4,
@parameter_name =
N'-PublisherFailoverPartner',
@parameter_value =
N'ServerC
Msg 21806, Level 16, State 1, Procedure sp_MSvalidate_agent_parameter, Line 63
parameter -PublisherFailoverPartner. The value must be an integer. Verify that replication is installed properly and that sp_add_agent_parameter is invoked with a valid value.The agent profile creation process cannot validate the specified agent parameter
value: the profile_id 4 does not exist or it does not support the
Any inputs will be of great help.
Regards,
Raj
Raj

Refer to this: http://msdn.microsoft.com/en-us/library/ms151799.aspx

Similar Messages

Movie playlist in iTunes is not showing up on iPhone after manually managing syncing and including movies from playlist.

Movie playlist in iTunes is not showing up on iPhone after manually managing syncing and including movies from playlist.

Thank you. This solved my problem too.
But, one little thing to share:
"There's an option in settings for Playlists. It was set to Music only. Changed that to All then found the movie playlist under Movies by selecting Genre."
This is not to be done in iTunes in your computer; this is to be done at your apple TV under "setting". "audio video" "show playlist" "music only/all"
I am posting this here because I started chat mode with Apple support last night at midnight till 1:30, they didn't know what to do.
They called me back this morning at 10 am.
It's not 11:40 they finally know what I am talking about and showed me where to to find the "music only / all" toggle. My problem is now fixed;
all these time, they have in front of them a screen shot of your questions and answer but they don't know where to change it from music only to all.
So, I hope this will save the next victim a lot of time.
Again, thank you.

Mail hang and is not responding in activity monitor after mavericks update

I click on the mail icon in my dock it just hangs and wont open. The activity monitor says it is just not responding. Any suggestions?

You have a program running that is incompatible. What third-party sound or audio applications are you running? It will be one of those. If you quit them the problem should disappear. You will have to force quit coreaudio and UserEventAgent via Activity Monitor or restart the computer but do not run the third-party application(s).

I installed Flash Player for yum on Fedora 20 / Firefox 30, but it is not listed as plugin, even after restarting Firefox

what to check next?

Have you verified that the installation was successful and that your browser does have the latest FP14 installed? For reference sake - download the flash player again from this link - http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g. This is the mac installer

TS1538 What do I do after step 6 in "If the Apple Mobile Device USB Driver is not listed"?

i'm very confused about step 5, "Verify that the Apple Mobile Device USB Driver is installed" > "If the Apple Mobile Device USB Driver is not listed", what do I do after step 6? I looked for and found the entry that recognizes the device as a camera, "Apple iPhone, now what? I'm trying to resolve an issue. After an iTunes upgrade in July 2012, I have not been able to get my iTunes to recognize any of my devices. I have uninstalled/reinstalled iTunes, all the steps. Now I'm on this one and I don't know what to do after this step 6. I looked and found the entry.... now what??? I am out of room on my phone because everything I buy on iTunes on the computer mysteriously appears on my iPhone 4, and everything I buy on my iPhone mysteriously uploads onto my iTunes the next time I open it. My phone will charge when connected to the computer, and Windows recognizes it and asks how I want to open pictures, etc. But in iTunes it will not show up under Devices. This is getting beyond ridiculous and I have to get some of this music off of my phone!

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

After updating to iTunes 12 the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

Acrobat XI Pro not listed under applications after installation

Mac OS: 10.9.1
Processor: Intel Core i7 2.3GHz
After installed Acrobat XI Pro, it is displayed in the Creative Cloud Desktop as "Up to date"
But not listed under "Applications" folder.
Could not find Acrobat XI Pro anywhere in the computer.
When you choose "Open with" option for pdf file, not displays Acrobat XI Pro.
Instead it displays the older version Acrobat Pro 9.
Someone please help to fix this.

So, I completed all the steps with no luck. Uninstalled CC and all its components, ran the cleaner, etc. When I reinstalled a fresh version of the Creative Cloud Desktop App, it showed as if Acrobat XI Pro is already installed - see attached screen shot. Any other suggestions?

Device not listed in find my iphone after updating my apple id password

how to track my iphone5 that is already lost and when i sign in icloud my lost device is not listed in find my iphone after updating my apple id password. i also enabled icloud and imessage and facetime in that iphone using my current apple id that i used in icloud. pls help me

If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

Bridge does not tile thumbnails accross two monitors after restart

After restarting my computer Bridge suddenly quit tiling the images being displayed and only shows one row on the primary content panel.
The only alteration to my system prior to restart was installing DivX. System was restarted after bridge refused to open, and Task Manager did not give any indication of Adobe products running.
Am I missing some obvious setting, and if so do you know why it reset after a restart when it's worked repeatedly for months. I've tried restarting multiple times, I've reset the workspace, and each time I then expand the window accross the two monitors it automatically removes the grid resizes to largest size and maintains the single row even as I adjust for smaller thumbnails.
Windows 7
CS6

on one monitor it works as it did before, just not with the second monitor, which it did before.
Did you besides resetting the workspace also try to reset Bridge prefs by restarting Bridge holding down cntrl key and choose reset prefs?
This is the first thing to try whenever bridge start acting other then before all of a sudden.
There can be many things disturbing applications and Bridge is a critical app in this one.

6131 Add New language Not Listed After SW upgrade ...

Hello Every body,
I flashed my 6131 from Version V3.70 to V5.50. Everything Seems to be fine but Greek Language is not listed.
Greek Language was supported by previous firmware.
Any possible solutions ?
Thnask you in advance

Hello Ivotsis,
everything depends on product code of your Nokia 6131. You find this code under the battery. For example my product code is 0532273.
Sometimes happens, that the phone you bought probably in Greece is originally designed for other country and your language pack was flashed into your phone later by the reseller.
In this situation, if you use Nokia Software Updater it downloads firmware with language pack according to your phone's product code, where greek language is missing.
In other forum here is possible to check the product code of your phone against the language you need (before flashing the firmware) to know, if your language after flashing will be available or not.
In your situation is necessary, I'm afraid, to visit Nokia service center with request to flash firmware again with correct (greek) language pack. It may cost some money.
Best regards,
Tomas

HT201299 After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

Steps to take to resolve this issue:
1/ Turn off Wifi
2/ Ensure Mobile (cellular) data is on
3/ Turn iPhone OFF and then ON (re-boot iPhone)
4/ Without turning Wifi on, open an app that requires mobile (cellular) data.
5/ The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
6/ In time all apps that require or use mobile data will be added to the list automatically.

All pages not listed after mobile me update

When I look under iWeb on my mobile me account, all of my pages are not listed. However, when I go to the sites that forward to those pages they show up. I don't want to republish yet as it may just be a case of the apple servers being slow to finish a complete update.
Any one else with this problem?
Message was edited by: lestudio

lestudio wrote:
I guess I was trying to find out if this is normal or if I am the only one where it shows a partial list.
I think it's normal — you're not the only one! ...You could try getting more info from MobileMe live chat support, which is now 24/7 — see this announcement.

Application Sudo listed in Activity Monitor - Is this a default app that should be running?

First Question:        Do other MBP users have an application Sudo listed in Activity Monitor from start up of their mac or with typical use?
Second Question:   If you have Sudo process listed in your Activity Monitor, do you also use an Huawei USB wireless modem?
Third Question:       For those experienced in relevant coding domains and given the more technical details below - your thoughts?
(Technical)
Using MBP Retina, mid 2012, OSX 10.8.4
I understand sudo is a unix root level access command.
I have used Terminal and become familiar with some basic unix commands, including using the sudo command in very limited single action command circumstances. I have not used Terminal for many weeks, and the sudo command probably twice several months ago.
Sudo showing in Activity Monitor as an active process is to my understanding an entirely different situation to it being used in Terminal. It appears the sudo process is being activated by some other application or process not of my direct use or actions.
I remain a little concerned about this in view of the purchase of this particular MBP. It has a story to it. I was told this MBP was available as new on discount as it had been purchased by a man for his wife, the wife then left him, and subsequently he returned it unused to the store.   I was aware that there was a slim risk the laptop had been used for some other activities, and returned so any come back comes back to the new owner.
I noted later with use that the MBP lower keys were sticky as if something has been spilt on them, so I do wonder if the laptop was previously used, then wiped, in which case the story presented to the retailer is likely not true and a more concerning scenario becomes possible.
All the same, I felt a clean install should remove any risk. The MBP arrived in standard ready to set up and go mode, so OS loaded but no activation. So it seemed a clean install to me.   I did not wipe the HD and do a fresh OS install from scratch. A decision I now regret.
Some months after using this new MBP, my concerns were raised when I had one day of inexplicable internet usage on a wireless internet connection. Not only did the level of data upload and data load, about 4 GB out of 20 GB for the month not make sense with actual usage, but also the MBP system logs did not tally with the internet providers accounting of usage on that day. There have been two or three other anomalies in usage since. The internet service provider reimbursed me on my evidence of OSX system logs. Not sure if the service provider has people joy riding other users accounts or something suss this end was going on. Never resolved. The ISP was not exactly forthcoming, and I had to press hard to get some collaboration on resolve the anomaly of unexplained data usage.
On the less suspicious side, the existence of this sudo program tracked down as in part coming from the install software from a Huawei modem provided by my internet provider. However, while widely used and therefore likely not a security risk, I still feel need for some better explanation and resolution of the persistent sudo process.
I have inquired to Apple Support about this sudo app running, and it apparently was not seen as an issue of concern by the front line support staff. I took up some further concerns with them but checks indicate no issues of concern with the MBP from their assessment. I trusted that as fairly likely a definitive view, and so left the questions and anomalies as unexplained but harmless.
It is now several months later and I still find the existence of sudo as a running application or process in Activity Monitor troubling, and decided to try and resolve once again how typical and for what reason it is active on my MBP. Which brings us to this post.
I have again spent a few hours searching on Google and Apple Support Forums.   All search results I find relate to the use of sudo as a unix command in Terminal to resolve a problem. I can not find any indication of sudo as an app being open routinely in Activity Monitor with or without Terminal being opened or used.
The only way I can think of to resolve if this is unusal or not is to get on this forum and ask the first two questions at the top of this post.
More technical details follow.
For some more technically minded the details may be of interest, hence below here I have added details for further comment.   I am hoping some MBP users on this forum may also be coders, and hence have some idea of the internal mac coding environment. Enough to shed some light on this situation.
As mentioned, I think the sudo Activity Monitor may originate from the running of the Internet Providers USB Wireless Modem and software (Huawei E 169? modem). The USB modem has the install software on it. You install that software on your HD as an application.
On this USB Wireless Modem front I have done some checking.
Killing sudo in Activity Monitor does not stop an internet connection mid session.
When the USB modem is removed, the sudo process remains running and listed in Activity Monitor.
If I remove the Modem icon, unplug modem, close all apps, restart without the modem connected, the sudo process is still loaded and running in Activity Monitor.
Months ago on a previous check if I deleted (uninstalled) the modem software, removed associated start up files installed by the modem installation, took out the USB Modem and did a restart, there was no return of the sudo process in Activity Monitor. When the modem software was reinstalled or the start up files restored directly, the sudo process returns to Activity Monitor. One of the software bits installed in start up files calls sudo (or so it appears having a peak in BBedit at the files.)
This seems to fairly much establish the source of the sudo application. However it does not resolve why it needs to be open all the time, and if this is unique to this modem, my modem, modems in general, or if permanent running sudo processes are fairly 'normal' in general. Since sudo is a root level access process, I do feel a little concerned of the situation.   Let's say the sudo process is needed to initiate the modem under some justification. Does the sudo process in remaining running permanently from there on, with or without the USB modem connected leave an open access way and vulnerability that can or is used later?   i do not know enough of the coding level architecture to form a view.   Still, seeing a permanent sudo process operating does niggle by sense of suspicion.    Hence, I continue to raise this issue and ask the questions I do.
In Activity Monitor:
sudo as a process when running is not very active.
Real Mem 8 KB, Virtual Mem 9.4 MB, Sent Msgs 75, Rcved Mesgs 26, Ports 25, Intel (64 bit).
The sudo process:
Using Sample Process in Activity Monitor:   sudo appears to be a running of the actual sudo command from within the unix command files.
Path:            /usr/bin/sudo (Master Library, not the one in the User files)
Load Address:    (removed)
Identifier:      sudo
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: launchd [1]
Call graph
2nd line is 2656 start (in libdyld.dylib) + 1 [(removed)]
Binary Images:
Includes reference to lots of .dylib files. eg libcache.dylib, libquarantine.dylib, libremovefile.dylib, libcompiler_rt.dylib, libcorecrypto.dylib
The parent process is launchd[1]
Process:         launchd [1]
Path:            /sbin/launchd
Load Address:    (removed)
Identifier:      launchd
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: ??? [Unknown]
It seems all of the activity of launchd[1] is from the sudo process.
Again reference to .dylib files as captured in call graph and Binary images.
I hope the details are valued by someone with an interest to assist with resolving concerns.

Thanks,
I usually use the OS connection option. So as you suggest, connect without the ISP connection software. Doing so does not by-pass the sudo command being active in Activity Monitor however.
On reading my post I see my failure to link the concerns of the laptop purchase with the sudo and modem. My thought here is of an intersection of known vulnerability with this widely used modem/software (via permanent sudo process activated) and that vulnerability then being known and utilised by another party(s).
I am pursuing the issue in part with consideration to a broader possible issue of vulnerability.
Thanks again for your thoughts and suggestions. Valued.

Communication Channels do not appear in the monitor

I have just created a sender and receiver file adapter and activated them. I tested them in a process by dropping a file into the sender directory with a 10 second poll interval. The file is not being processed.
If I check the corresponding Integration Server Adapter Engine status, there is a green light, BUT When I select the Communication Channel Monitoring button, there are no channels!
Also, although I have created parties that use these channels, they also do not appear in the filter drop down list.
Is there some reason why these channels are not appearing?
Just for clarification; this is on a new XI installation.
Kind Regards,
Tony.

Hi,
import SAP basis software component into repository
as per question:
3. I can't see my adapters in the adater monitoring after the import of a new SP
on XI FAQ
for PI 7.0 - sap basis 7.0 for XI 3.0 sap basis 6.40
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Output device not listed.

What if my sound output device not listed? Trying to connect my MacBookPro 17" (mid 2010) to my tv. Video plays. I have connected digital audio cable to both tv n Mac. When I go to sound in system preference (after cord was plugged in) nothing listed.

Very well stated. And, sometimes I do forget that there is still such a thing as celluloid. Not to mention all the new "K"s that RED is coming up with (aren't they working on something like 27 or 28k now?) When I look at it from that point of view, what you say makes perfect sense.
But then why does preferences>video preview in After Effects give me the "output device" option of IEEE 1394 at NTSC 720x480? This leads me to believe that I could plug a deck into 1394 and get a video preview. If this is the case, then my way of thinking says it should offer other options for "output device".
When I first set up Premiere Pro CS4, the playback settings did not list the HDMI HDTV as an external monitor option. It wasn't until I fooled around with the system's display settings and turned the HDTV into an extention of the desktop that suddenly Premiere Pro listed it as a possible external monitor. So, my history there (and my goofy sense of logic that makes perfect sense to me) has me wondering if a similar sequence of messing with the display options is suddenly going to make AE see the HDTV as an "output device". I am not interested in realtime playback, merely the closest reference possible as to what my video image looks like in HD on an external monitor. I ask "why do I need a separate video card like my old Matrox card, when standard graphics cards these days can handle HD & even have HDMI out?"
Admittedly, I know next to nothing about the complexity & inner workings of software and computer components. Why, I was ready to throw a party just because I successfully installed an additional hard drive in my new computer. I must be like one of my own clients who don't understand why we can't easily separate a voice track from a music track when it's been rendered as one .mp3 file...or why we can't quickly cut a person out of a video layer and make them seamlessly interact with footage of JFK, Zemekis-style.

Publication is not listed in reolication monitor after manual database failover

Similar Messages

Maybe you are looking for