Published software simulation not displaying correctly when published

Hello,
When viewing a Captivate 6 software simulation either through the Preview mode or when published, screens will 'break up' at different points - part of the previous screen will stay in view when it moves to the next screen. This doesn't happen for the first couple of times it is viewed, which is a worry as you never know who/when it is going to happen.
Once the projects is copied over to a new blank project it will be fine for a few views and then do the same again - it is not always at the same place.
Does anyone know what may be causing this?
Thanks,

You might try de-selecting the Advanced Project Compression option in the preferences:

Similar Messages

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Eurosign not displayed correctly when picked from database

Hi ..
I'm having a problem getting a eurosign stored in an Oracle Database to be displayed correctly in my Crystal Reports 11.5.
When using the built in (preview) Crystal Viewer, the eurosign is displayed correctly, but when I want to print the report directly to a printer or to export it to pdf the eurosign is displayed as a box?
It only haapens when i need to pick the eurosign from the database. If I insert in a textbox on the report, it will show correctly.
Please Help.
Best regards,
Jacob

What is the source of the text stored in the database. I ran into an issue a ways back where someone was copying news articles from a website into their database and the euro symbol would not display correctly (unless the option HTML Text Interpretation was used).
You might want to do a quick check to see if it is stored as an ascii character using a formula similar to the following;
asc(mid({database, x, 1}))
where x = the position of the euro symbol in the string.
The formula result should be 128.
Edited by: Graham Cunningham on May 22, 2009 12:20 PM

Oops - spry menu bar 2.0 does not display correctly when loaded

Oops - obviously I'm new at this. I think I got my graphics loaded now.
Dear Sirs:
I notice bzz31 had a pretty complicated post, so perhaps someone can help me with my complicated problem that has been vexing me for months. I tried the Spry Menu Bar 1.0, but it was impossible for me to edit, and I was delighted to see Spry Menu Bar 2.0 come out. However the 2.0 version has been frustrating me as well.
I can get my menu bar to display properly in Live View, as shown below.
However when I load everything onto the server, the menu bar does not display correctly, as shown below:
I don't quite understand the code "file:///" but I interpret it to mean that the Spry-UI-1.7 folder is in the topmost folder of MacPro5-Docs, which is my hard drive. Here's the code I'm having trouble with:
Here's my computer directory, shown below:
Since my index file is two folders down from Spry-UI-1.7, I loaded the files onto the server similarly, as shown in the next three pictures:
(The picture below is the same as the one just above, but now you can see the path from index to Spry-UI-1.7.)
I would be most appreciative if someone can help me.
Thank you.

Have a look at the following links
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryMenu.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js" type="text/javascript"></script>
<link href="file:///MacProG5-Docs/Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
Each of the above points to a file on your local system and cannot be found by the remote server.
Replace the red coloured parts with http://www.twhsbands.org/ will remedy the situation.
You also have some remnants of the other SpryMenuBar that should be removed from your markup.
Gramps
Wel, so much for the red coloured parts, they did not show up.
The red coloured parts read file:///MacProG5-Docs/

XML not displaying correctly when larger

Hi,
When my XML dataset exceeds 2350 lines, SpryDOMUtils.js seems to ad a <tab> to the XML string and it's not displayed correctly in it's container.
I included 2 screenshots to show what's happening. Tnx a lot!!

Sorry for the delay, I have spent some time trying to find the culprit. Finally I decided to start afresh with the following markup, which works quite well in all browsers.
<!doctype html>
<htm>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">
      <div id="div1">
        <table align="top" cellpadding="5">
          <tr id="tr1">
            <td valign="top">{datum}</td>
            <td valign="top"><a href="{link}">{inhoud}</a></td>
          </tr>
        </table>
      </div>
    </div>
</div>
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 2</div>
    <div class="AccordionPanelContent">Content 2</div>
</div>
</div>
<script src="SpryAssets/SpryAccordion.js"></script>
<script src="SpryAssets/SpryData.js"></script>
<script src="SpryAssets/SpryDOMUtils.js"></script>
<script src="SpryAssets/SpryTooltip.js"></script>
<script src="design_template_info12.js"></script>
<script type="text/javascript">
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
</script>
</body>
</html>
May I suggest that you copy and paste the markup into a new document to then start adding your own stuff, making sure that you test in IE7 or IE8 at each step.
Note that I have left xpath.js out of the markup. I think it will work either way. Just keep an eye on it.
PS
I did reformat the XML to delete all of the empty lines. Not sure if this helped or not. You can do this within DW as follows
Message was edited by: Altruistic Gramps

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

U00AE is not displayed correctly when executing in Web Browser/Portal

All,
We have symbols like ®, in our data. This is stored and displayed correctly in BI and Bex, When we execute the same in a graph in Web template using WAD it doesnt display properly. Shows some weird characters. Any idea on where and what the setting needs to be?
Thanks
Suja

Suja,
It could be possible that ® is not being recognized by HTML - character set is conflicting...
try this out...
Place this META tag in the part of the document, nowhere else!HTML snippet got from
http://www1.tip.nl/~t876506/entitiesTips.html
also check out which character set this belongs to...
http://www.columbia.edu/kermit/csettables.html
Arun
Hope it helps...
Message was edited by:
Arun Varadarajan

Jlist not displaying correctly when populated by thread

Hi, I have this problem when a thread attempts to populat a Jlist, it will only populate sometimes. Othertimes, it doesnt display correctly. The model will have the correct objects in it, but the display on screen will not appear. I have some code below that demonstrates the problem. I renger html in the Jlist just so that its easier to see, but doesnt have to be html.
import javax.swing.*;
public class listtest extends javax.swing.JFrame {
private DefaultListModel model = new DefaultListModel();
public listtest() {
initComponents();
jList1.setModel(model);
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jList1 = new javax.swing.JList();
jButton1 = new javax.swing.JButton();
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
exitForm(evt);
jScrollPane1.setViewportView(jList1);
getContentPane().add(jScrollPane1, java.awt.BorderLayout.CENTER);
jButton1.setText("jButton1");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
getContentPane().add(jButton1, java.awt.BorderLayout.SOUTH);
pack();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
new myThread().start();
/** Exit the Application */
private void exitForm(java.awt.event.WindowEvent evt) {
System.exit(0);
* @param args the command line arguments
public static void main(String args[]) {
new listtest().show();
// Variables declaration - do not modify
private javax.swing.JButton jButton1;
private javax.swing.JList jList1;
private javax.swing.JScrollPane jScrollPane1;
// End of variables declaration
class myThread extends Thread{
public void run(){
model.clear();
String temp;
for(int i = 0; i < 100; ++i){
temp = "<html><table><tr><td>" + i + "</td></tr></table></html>";
model.addElement(temp);
When you push the button, sometimes the list will come out correctly and sometimes it wont. Anyone know how to get it to display correctly? I tries all sort of things with InvokeLater, validates, repaints, etc. I cant get anything to get it to display properly.

I think this is closer to what you wanted.
Your sample code if obviously simple enough not to need it, but this allows you to thread off the work and the use invokeLater only to push the results back to the UI/event thread.
for( int i = 0; i < 100; ++i )
final String temp = "<html><table><tr><td>" + i + "</td></tr></table></html>";
SwingUtilities.invokeLater(
new Runnable()
public void run()
model.addElement(temp);
}

Value not displayed correctly when sent through a Java POJO datasource, but is perfect when used with MySQL.

I have this strange problem - A field value is displayed correctly in the crystal report when pulled from MySQL table (field is Varchar(25)). But the same field when loaded into a Java POJO and set the POJO as new datasource the value is garbled up.
Any ideas?
Thanks,

Early implementations of the POJO Factory set the default display size to 12, which caused corruption in the display starting from the 12th character when the size exceeded the display size.
Would you try specifying the MemberColumnDisplaySize property for that column in POJOResultSetFactory to reflect the actual size?
Sincerely,
Ted Ueda - Developer Support

Muse site not displaying correctly when 'Published' to BC

Hi all
Strange incidents happening with a Muse site I'm designing for a client. When I use the Publish feature (which uploads the site to the default Business Catalyst domain you get with the Muse subscription) it throws the elements all over the place, so buttons, type, imaegry and widgets aren't wheere they should be.
I've cleared the cache, restarted the browser, tried in other browsers and still the same result, so pretty unhappy.
When I 'Preview' the site in a browser everything seems perfect.
Bizarre thing is when designing my first ste the opposite was the case; lots of visual problems when using 'Preview' but perfect when 'Published' to BC.
Anyone got any ideas as to why this is happening?
All help appreciated

Hi gaurav
Thanks for the reply, think we have the solution. Apparantly Muse is not uploading the updated CSS files. I created a test domain on my own website to use for this project and uploaded via Fetch and everything worked fine.
So it looks like it's an issue with Muse
Regards
Phil Wiles
Creative Director
Phunction Ltd
+44 (0)7513 555474
http://www.phunction.co.uk

Type not displaying correctly when publishing

I have a Flash MX file which I created a couple of years ago.
I edited it (in MX) and when I published the .swf, the type only
displayed every other letter or so. Any one know what the problem
is and how to fix it. The type face was Avante Garde Italic, if
that matters.

Ignore. Have found out it was down to paths. Sorted

German characters not displaying correctly when redaing from URLConnection

I have a java file reading the contents of a generated jsp page and writing to an html file and I have the code below doing that. However a couple of German characters like �, � and � are being changed to � in the html file. I tried to set the encoding for the reader, the OutputStreamWriter and also for the URLConnection, but it does not seem to help.
The data is fine in the database.
Any inputs on resolving this will be greatly appreciated.
public void makeLiveHTMLfile(String uri, String HTMLFileName, String siteUrl, String siteDir) throws
Exception {
//Local vars
int i = 0;
try {
getConnection(uri);
Reader rd = getReader(uri);
FileOutputStream output_file = new FileOutputStream(
SystemProps.getInstance().getProperty( WEBTOOL_HOME_DIR )+"/html/" + HTMLFileName);
OutputStreamWriter output = new OutputStreamWriter(output_file, "UTF8");
while (i != -1) {
i = rd.read();
if (i != -1) {
output.write(i);
rd.close();
output.close();
this.sendFile(HTMLFileName, siteDir, "html", siteUrl);
} catch (Exception e) {
throw e;
private Reader getReader(String uri) throws IOException {
if (uri.startsWith("http:") || uri.startsWith("https:")) {
// Retrieve from Internet.
return new InputStreamReader(conn.getInputStream(), "UTF8");
} else {
// Retrieve from file.
return new FileReader(uri);
private Writer getWriter(String uri) throws IOException {
if (uri.startsWith("http:") || uri.startsWith("https:")) {
// Retrieve from Internet.
return new OutputStreamWriter(conn.getOutputStream(), "UTF8");
} else {
// Retrieve from file.
return new FileWriter(uri);
private void getConnection(String uri) throws IOException {
if (uri.startsWith("http:") || uri.startsWith("https:")) {
// Retrieve from Internet.
conn = new URL(uri).openConnection();
conn.setRequestProperty("Content-Type", "text/html; charset=utf-8");
conn.setRequestProperty("Accept-Encoding", "utf-8");
conn.setRequestProperty("Accept-Charset", "utf-8");
conn.setDoOutput(true);
conn.setDoInput(true);
Thanks,
Monisha

This web page says that the correct encoding code is "UTF-8", not "UTF8".
http://java.sun.com/j2se/1.3/docs/api/java/lang/package-summary.html#charenc
Maybe there are aliases, and it recognises both.... but worth a try.
Also, when you open the web page with a browser and view the source, do you see Utf8 mentioned in the webpage ? Maybe it's not in utf8, and you're trying to force your app to read it as such.
Ps. we won the war... tell them to start speaking English !
regards,
Owen

Percentage Values are not displayed correctly when Calculated Item feature

I have developed an OBIEE answer with multiple pivot tables. Each of the Pivot Tables contains a mix of $ Amount and Percenatge columns. I have to display the totals as the last row of each Pivot Table. For reasons I am yet to figure out, some of the totals were not working. Hence, I used the "Calculated Item" feature with sum(*) as the formula to get the Totals. This is giving me the correct results for $ Amount columns but not for the % columns.
The system seems to be summing up the row-level percentages to arrive at the total percentage, which is not the expected bhavior.
Sample data:
Products| Dist. FG| VPE %| Mfg. FG| Mfg. FG VPE %
Product1| $58| 1% | $1 | 100%
Product2| $45| (0%) | $36 | 24%
Product3| $22| 0% | $12 | (40%)
Product4| $1 | (0%) | $9 | 0%
Product5| $41 | 2% | $15 | 15%
Total | $166 | 3% | *$73* | *100%*
Total - Calculate Item (sum(*))
Total Mfg. FG - Correct
Total Mfg FG VPE% - Incorrect (Expected value is ~ 9 %)

Thanks for the response, Andre.
As I mentioned, The default total row is not producing the correct results for reasons I am yet to figure out.
We are using OBIEE 10g (10.3.4)
Percentages work well with default total, but here we need the same result through the calculated item.

Desktop Image does not display correctly when centered

Have been doing a fair amount of Macro photography in high resolution lately. I often take the best close-up images and put them on my second monitor which is a Cinema Display. As the photos I take are 20MP when I select the images and center them, I *am* looking to in effect 'zoom in' and have the image displayed large.
This works just dandy in Snow Leopard, apparently not so well - if at all - in Mavericks.
What is the limiting issue here that an image no longer displays under the 'Centered' setting if that puts the edges of the frame beyond the display's edges? This is what I am talking about. You can see from the first three grabs, the desktop photo changes with each setting but stops in it's tracks with the last.
http://home.comcast.net/~foodandart/MacForums/01-FitToScreen.jpg
http://home.comcast.net/~foodandart/MacForums/02-StretchToFitScreen.jpg
http://home.comcast.net/~foodandart/MacForums/03-FullScreen.jpg
http://home.comcast.net/~foodandart/MacForums/04-Center.jpg
That last photo would be stunning on my desktop if it was actually displaying as it shows in the Desktop Preference control panel.
Any ideas?
Deb.

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Published software simulation not displaying correctly when published

Similar Messages

Maybe you are looking for