Pulling out my Hair, need some help from experts out there

Hi - I have been struggling with an issue for a week now and I was wondering if one of you can help me to solve my issue. I have done numerous searches on this topic which got me somewhat in the right direction but I'm still not getting the results I want. The end objective is simple, a non-stuttering video on YouTube. Sounds simple right?
here is what I did:
I have recorded some aerial footage with a GoPro 3+, added some effects in After effects, brought the results over in Premiere pro for some minor editing and then used Media encoder to get it to a format that youtube likes. My detailed steps are as follows:
-Take GoPro footage (59.94 fps, 1920 x 1080 in H.264 codec) and transcode it through GoPro studio using the CineForm codec so it plays nice with AE (I keep my 59.94 fps and same dimensions (1920 x 180).
-Load transcoded footage in AE (I checked if my composition settings are the same as the imported transcoded footage)
-Apply effects (3d camera tracking, add some 3d text, some lights, environment layer) and render the clip out as a quicktime lossless file (PNG) – result is 3 clips from AE that I now want to bring into Premiere Pro for some editing
-Import PNG file in Premiere Pro (I drag the clip to new sequence item so the sequence matches the clip I import in Premiere pro)
-I make some minor edits in Premiere Pro (some transitions between clips, nothing fancy)
-I then render out the footage using media encoder (or directly from Premiere, tried both) with the following settings:
Format: h.264
Preset: custom
Export video and audio
TV standard: NSTC
Frame width: 1920
Frame height: 1080
FPs: 29.97 or 59.94 (results/problem is the same with both fps settings)
Field order: progressive (greyed out – can’t change it)
Pixel aspect ratio: 16:9 – widescreen
Profile: main
Level: 4.2 or 5.1 (same result for both settings)
Render at maximum depth: checked
Bitrate encoding: VBR, 2 pass
Target bitrate: 8 or 20 (same result with both settings but obviously larger file with higher target rate)
Maximum bitrate: 8 or 25 (same results for both settings)
Use maximum render quality: checked
Audio, multiplexer etc: standard settings, no change
The rendered video runs smoothly on my mac but when uploading this video to youtube, the video stutters. I have tried multiple settings and can’t get the video to play smooth. Any tips or suggestions are welcome!
You can watch the video here:
Furnace lake edit 1 - YouTube
Thanks.

sanderx1 wrote:
Hi - I have been struggling with an issue for a week now and I was wondering if one of you can help me to solve my issue. I have done numerous searches on this topic which got me somewhat in the right direction but I'm still not getting the results I want. The end objective is simple, a non-stuttering video on YouTube. Sounds simple right?
Thanks.
Rick has given you what you need, he always does.
But the task you've described is not simple at all. It's not really an After Effects issue.
There are many sites that offer good recommendations for maximizing your youtube workflow so your video looks the best and plays flawlessly. Youtube offers a good set of parameters. Some of this stuff is worthless, too. You've got to be selective.
Starting out delivering a full 1080HD clip is not necessarily going to work out for you. Try rendering out to a 720 file. It's far smaller so it will be compressed much less by it's upload processor. The playback may be smoother and your audience is not going to be able to tell the difference between the 720 and a 1080 clip, most of the time.
Encourage you to drop back someday and let us know how you made out with Rick's advice.
How to Make Professional Quality YouTube Videos: 6 Steps
How to Make Good YouTube Videos for Video Marketing: 8 Steps
How To Make Videos Look Great on YouTube - YouTube
How to Make YouTube Videos Look Great
Video quality - YouTube Help
Tips of Getting Best YouTube Video Format for YouTube Uploading

Similar Messages

Need some help from the management : A deeply dissatisfied customer

Hi,
I hope I am one of the very dissatisfied customers of you company. I bought a new T715 and it has already gone for a repair twice. I gave it for repair for the first time in october (ETA was 20 days and told by the service centre) and I got the phone after some 30days only after an intervention of a manager. Prior to that the customer care was saying that they do not have the parts and they have no idea about how much time the repair is gonna take. Surprisingly it took only 2day once the manager intervened.
When I was submitting the phone on jan 14th 2011(work order number SE311MM110015), they again said that I'll get my phone back in 20 days. This time I expected that the service center guys will learn some thing from the past incidents and provide me a better service. But this time it was even worse. I did not hear from them for 35 days. So I called the customer care and had a long conversation with them on the service that is being provided but no-one including the floor supervisor(nishant) had a clue about what happening with my phone. I was startled by thier reply that they will start working on it as I have registered the complaint. Then I asked them what were they doing till now for which they had no idea. I asked for an escalation of this case to a manager which they refused. They said that I'll get an update after 48 working hours(5days).
The episode continues. I called the help desk after 5days. Now their reply is that I will get my phone back on march 10 2011. So, it is some 57 days since the day i submitted the phone which is 3 times the ETA they promosed. Now when I ask them why is it taking so long I get the same reply as I got for the first time that they do not have parts. The I told them I cannot accept this kind of service from a company like sony erricsson for the second time. For this the floor supervisor harish said that If I want my phone back earlier they'll return the piece back to me without repairing and they are not responsible for this. This time I again asked for a managerial escalation which they again refused and asked me to call after 2 days. Can I atleast hope for a positive reply this time??
I am perfectly okay with one device out of a lakh being defective. I understand this is the reason that you provide the customers a warranty. But I have some issues with the support which you are providing:
1) Managerial escalations : I think I am entitled to talk to some one who can actually solve my issue when the lower level doesn't solve it in time. I do not understand why I am being denied the escalation which I did not find in any other support. They do not even provide me an email ID of a manager.
2) Support process : What is the use of those processes in place where the people I am talking have no idea of what the next step should be. They do not have the database or knowledge of the previous cases. Even the floor supervisor have no aswers to the legitamate questions that the customer poses, they talk as if they are not responsible for these issues.
3) Time taken: Taking some days to provide the customer a mere update is not how a 21st century support should work.
I hope you people agree with my ideas. And please I request all the managers who stumble upon this thread to reply and guide me about my next action.
Thanks and Regards
PRakash Josyula
Work order number : SE311MM110015

@management : Please help me... I did not get my phone back yet... this time they were saying that they will investigate into this case and this process can take 10 more days... When I asked for a manager escalation they dropped the call... And surprisingly they started dropping my calls which is not at all acceptable...
Please managers... I need to talk to you... I need my phone back repaired....
@others... Please lemme know a contact of a person in managerial cadre if you are ware of one...
Plleeeeeeeeeeeeeeeeeeeeeeeeeese

I have a ipad2 however I need some help on cutting out some text. I can create the box but I don't see any delete text.

Can some help me I'm look for the delete text on the box but don't see it. Are my settting wrong ?????

This box? If so - follow Ralph's instructions - tap - Cut.

HELP! I need some help from true Mac fans! What should I buy???

So, I'm moving to Japan, which has a couple of implications (other than the fact that my wife's parents and my parents are looking for any legal recourse to stop us from taking their only grandchild out of the country). More importantly however, I have had to sell my B&O TV and music system (different signals from the UK where we now live). I also decided to sell our stereo (or rather my wife decided it was too bulky so as long as it was not in the living room or bedroom I could keep it...). Finally, I need a new laptop for personal use. I have some friends that are absolute mac fans, who have convinced me to go over to the other side (i.e. yours).
The opportunity I now have is to create a complete system as I need a laptop, something to play my music, a TV, etc. Given I am starting from a clean sheet I was hoping somebody out there could help me 'design' a complete set-up. My wife and I are keen photographers (both photography and video), we like listening to music, and watching movies (we definitely need a region-free DVD player), so what should we buy?
Any input would be hugely appreciated.

OSX also supports IME right out of the box.
日本語　ー　わかりません
It sets up pretty well, too; I like it more than Mircrosoft's implementation (language bar).
Only thing to keep in mind is where you buy the MacBook; if you get it in Japan you'll get a Japanese keyboard, which displays most of the kana alongside the keys. You also get the conversion and switch keys on the keyboard itself, which is great.
The MacBook Power Unit is multi-voltage, so no matter where you pick it up the worst you need is a plug adapter; although getting one from apple would be best. Just don't think you need to buy a new power unit, only the plug and cable.

Error 4261 - really need some help from one of you pros!

I keep getting error 4261 when I try to burn CDs. I was able to do it for awhile just fine and suddently I can't anymore. Each time I try now I get partway through burning and it stops, the disk is ejected, and I get error 4261.
Here's what I have tried so far with no luck:
1. Decreased burn speed to 2x, on both iTunes and my CD burner
2. Turned off my virus scanning software (Live One)
3. Tried various makes of disks
4. Tried burning a new mix with just songs that I had ripped from my own CDs (i.e., no "protected" iTunes)
5. Updated to latest version of iTunes (7.3)
6. Tried going back to version 7.2
7. Ran diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON X300 SE 128MB HyperMemory
RADEON X300 SE 128MB HyperMemory Secondary
Connected Device Information:
DiskDrive, WDC WD2500JS-75NCB1, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 13 songs on CD, playing time 56:25 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:20:25
Track 3, start time 09:03:00
Track 4, start time 12:43:17
Track 5, start time 16:09:07
Track 6, start time 20:03:02
Track 7, start time 24:53:57
Track 8, start time 29:09:72
Track 9, start time 33:22:52
Track 10, start time 38:01:52
Track 11, start time 42:28:17
Track 12, start time 47:01:25
Track 13, start time 52:02:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
Any suggestions???

There are a few points of interest on your Drivers and downloads page at Dell.
Dimension 5150/E510 (XP)
Check to see if the firmware on your HLDS GWA-4164B HH 16X DVD+/-RW is up to date. (That's the drive itunes is identifying as an HL-DT-ST.) at least one of the Dell firmware revisions to that was urgent and related to reading and writing to media.
Also,
Check to see if the Chipset drivers for your Intel Chipset are up to date.
Check to see if your Dell Dimension System BIOS is up to date.
Check to see if the video adapter driver for your ATI Hyper Memory PCI-Express X16 (DVI/VGA/TV out) Radeon X300 SE is up to date.
Once you're satisfied you're up to date, do you still get the 4261?

Macbook Pro 2010 is running slow. Need some help from you guys!

Can you guys help me out with some advice on how I can help it to run faster? I believe I have pasted al of the needed information below (if not, please let me know.)
If someone could please take a look at this and let me know what I should do to help speed up/clean up my mac so that it runs faster. I'm rather new to this so the more straightforward the instructions, the better! Thanks guys!
Start time: 21:16:46 07/13/14
Model Identifier: MacBookPro7,1
System Version: OS X 10.9.4 (13E28)
Kernel Version: Darwin 13.3.0
Boot Mode: Normal
Time since boot: 20 minutes
Diagnostic reports
2014-06-17 VMware Fusion Helper crash
2014-06-17 VMware Fusion Helper crash
2014-06-21 VMware Fusion Helper crash
2014-06-24 VMware Fusion Helper crash
2014-06-25 VMware Fusion Helper crash
2014-06-27 VMware Fusion Helper crash
2014-06-29 VMware Fusion Helper crash
2014-06-30 Adobe Flash Player Install Manager crash
2014-07-08 VMware Fusion Helper crash
2014-07-08 VMware Fusion Helper crash
2014-07-13 VMware Fusion Helper crash
Log
Jul 9 17:47:57 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 9 19:43:43 image 1362681856 (63%), uncompressed 2215559168 (540908), compressed 1354392912 (61%), sum1 deadda7e, sum2 24db8530
Jul 10 22:43:44 PM notification timeout (pid 3620, hpdot4d)
Jul 11 16:38:49 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 11 16:39:25 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 11 16:40:00 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 11 16:43:22 process WindowServer[3063] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Jul 11 19:28:16 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 12 11:49:26 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 12 11:51:43 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 13 18:31:40 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 13 20:49:36 MacAuthEvent en1 Auth result for: 78 Auth timed out
Jul 13 20:52:10 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 13 21:01:01 process WindowServer[166] caught causing excessive wakeups. Observed wakeups rate (per sec): 380; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45074
kexts
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN (1.0.0d1)
Daemons
com.vmware.launchd.vmware
com.sierrawireless.SierraSWoCMon
com.microsoft.office.licensing.helper
com.macpaw.CleanMyMac2.Agent
com.adobe.fpsaud
launchd
/System/Library/LaunchAgents/com.apple.noticeboard.agent.plist
- com.apple.noticeboard.agent
/System/Library/LaunchDaemons/com.apple.gkbisd.plist
- com.apple.gkbisd
/System/Library/LaunchDaemons/com.apple.noticeboard.state.plist
- com.apple.noticeboard.state
/Library/LaunchDaemons/com.adobe.fpsaud.plist
- com.adobe.fpsaud
/Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
- com.macpaw.CleanMyMac2.Agent
/Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
- com.microsoft.office.licensing.helper
/Library/LaunchDaemons/com.sierrawireless.SWoCMon.plist
- com.sierrawireless.SierraSWoCMon
/Library/LaunchDaemons/com.vmware.launchd.vmware.plist
- com.vmware.launchd.vmware
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/Resources/version.plist
/Library/StartupItems/HP IO/StartupParameters.plist
Bundles
/System/Library/Extensions/AppleFSCompressionTypeLZVN.kext
- com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN
/System/Library/Extensions/BeceemAppleWiMAXAdapter.kext
- com.beceem.BeceemAppleWiMAXAdapter
/System/Library/Extensions/Franklin Wireless Modem.kext
- com.fklt.driver
/System/Library/Extensions/NovatelWireless3G.kext
- com.novatelwireless.driver.3G
/System/Library/Extensions/NovatelWirelessFilter.kext
- com.novatelwireless.driver.DisableAutoInstall
/System/Library/Extensions/SierraDevSupport.kext
- com.sierrawireless.driver.SierraDevSupport
/System/Library/Extensions/SierraFSCSupport.kext
- com.sierrawireless.driver.SierraFSCSupport
/System/Library/Extensions/SierraFSRSupport.kext
- com.sierrawireless.driver.SierraFSRSupport
/System/Library/Extensions/SierraHSRSupport.kext
- com.sierrawireless.driver.SierraHSRSupport
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
- net.telestream.wmv.plugin
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.webplugin
- net.telestream.wmv.webplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Flip4Mac WMV.prefPane
- net.telestream.wmv.prefpane
Global login items
/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app/
Font issues: 41
DNS: 208.67.222.222 (static)
Restricted files: 3585
Widgets
iCal
Elapsed time (s): 329

I'll try that for sure. Anything else look like it could cause an issue?

Need some help from the InDesign community

Tired of working with PPT because the client demands it? We're trying to dramatically change how InDesign can help.
Take our survey so we can better undertand the needs from fellow designers:
http://www.exectones.com/limesurvey/index.php?sid=48842&lang=en

What you say, Buko, are you not praying for those special PowerPoint capabilities in InDesign!?
The low-resolution bitmaps that are converted to lowest-possible quality JPEG by default? The rectangles that automatically appear behind text, and over anything 'behind' it? The now it fits in a box text and now it doesnt while the font didn't change? The ruthless clipping of lowercase 'g's at the bottom of a text frame? The appalling way "drop shadows" and "lighting fx" are blended on backgrounds in glorious 36 dpi? The fully automatic re-formatting if you open, print, save, or even look at a slide? Choosing between the default zero-width lines that disappear entirely in print or their very next step in thickness -- fat slugs of 1 pt thick?
What ... what is it that bothers you?

HELPE ME OUT I REALLY NEED SOME HELP ON MOTION!!!

Hi I'm a high school student and I'm having a problem on motion. I need help on page 350 on step #6. Well my problem is that the lesson book tells me to select the sweep behavior and duplicate it, But there is no disclosure triangle to see the behaviors from. but the weird thing is that the the behavior is still working in the project when I play it, I just cant select it to duplicate it. so can you please help me. =)

Is it one of these?
http://www.google.com/search?client=opera&rls=en&q=motion3book&sourceid=opera&ie=utf-8&oe=utf-8
-DH

Need some help with figuring out numbers

I downloaded the newest version of numbers on my computer and created a new document. However, now it will not let me get in that document because it says I do not have the latest version of numbers. I checked and I do have the latest update for the software. Any suggestions??

Hi Jim,
I am trying to guess how you figured it out. For the benefit of other users, please tell. Perhaps this will help:
Wayne Contello has written a User Tip for this problem in the new releases of iWork.
https://discussions.apple.com/docs/DOC-6991
The trick is to drag icons for both versions to your Dock. Right click or control click on each and Options > Keep in Dock. That puts you in charge of which version you launch.
Instead of double clicking the document, run whichever version of Numbers suits and use File > Open.
Regards,
Ian.

Need some help from the smart apple users hehe

Ok so i had to reformat my pc due to having a nasty virus.
So the thing is that i have some music/photos on my ipod touch 3rd gen 32 gig that i dont want to lose.
When i login to itunes the only option i see is to import the library to my ipod but that would delete all the files i do not wish to lose.
How do i export all the contents of my ipod to the library?
Thanks in advance for all the help.

Have a look at this post by Zevoneer http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
After you manage to do what you want, don't forget to include your iTunes library in your backup routine http://support.apple.com/kb/HT1751 or http://support.apple.com/kb/HT1382

Hey :) Need some help from someone a bit more tech...

Would anyone please check if my cabinet will get Infinity please? Apparently its coming on the 31st March I know about 100 metres down the road gets Virgin Media but we dont! Its a new build estate. My postcode is LN1 1AW.
Thanks in advance
J

Not been able to found the cab just yet, but i did a little research. Basically i took 10 different postcodes between my house and lincoln exchange, some on small roads and some on main roads. I also used property numbers so it would be a little more accurate. I put all of these addresses into BT's wholesale checker. None of them came back with a message saying that they were due to get fibre? Surely this is a little bit strange. Lincoln is being upgraded and 1/2 of the city won't be getting it?
Thanks
J

Needs some tip from experts

Hi
I want to build a commercial DVD rental system which involves the loan side management as a local application and the costumer side as a web page. Both side will write,read and edit a database that will be located on the net.
I�m talking about a system that has to handle up to 100,000 clients. i�ve heard that mySQL is a suitable choise.
To tell you the true I�m scared to death because I�m only intermediate minus to Java and totally new the databases. there are lots of scary terms out there like J2EE,etc.
In the JBuilder 9�s help I find a tutorial called �Developing Database Applications� which talk about DataExpress and databases connections etc.
Do you think that learning that tutorial can give me a solid knowledge to do what I�m planning to with jbuilder?
Tx
D

MySQL will certainly fit in your budget, but you should be aware that there are problems. It's not ANSI >compliant, leaving out some important features (e.g., referential integrity with foreign keys). That doesn't >eliminate it as a possibility, but you just need to know. There are other databases out there (e.g., >PostgreSQL, Hypersonic, etc.)Im not sure that i got you�.do you mean international SUPPORT?
If you're intermediate with Java, and new to databases, you might be well served by hiring a mentor to >guide you over the rough spots.
Will you be writing the whole app yourself? Or will there be other team members?I�ll write the whole thing by myself cuz I cant afford hiring someone to do it.
Security will be a huge part of this, especially if clients will be reaching you over the Internet.I was hoping that is not a problem , since clients wont have access directly to me,they will only access to the database. is that a rough issue to protect databases from Israelic hackers? 
declangallagher
actually Java is my only programming skill, im a graphic designer. I don�t know what hardware im going to use,what options I have? I have to design the database.
How did I got this project?
Im a mini programmer with a fudge ambition, im working like a lonely wolf. you guys are the only source that I rely on. I just this that I can do a better job than the existing rental system thati have here/
If I�ll reduce dramatically the numbers of clients the system attend too ,it will reduce also the complexity of accomplish it? Let say only 1000 clients
Tanks
D

Interested in SAP IS ? Need some Assistance from Experts

Hi Techies.
I am SAP XI Developer, i came to know that there is much demand for the SAP XI developers who is having Knowledge in IS-U/IDE.
Will you please help me and assist me in this.
Is it advisible to move from SAP XI to SAP IS.
Please guide me...
Regards,
Nissi

Nissi:
ISU uses XI in many places - but is only a mechanism for processing messages and integrating systems. ISU itself is nothing like PI, and so it would be a radical departure for you.
I would suggest that you look at the help site, and other resources, as listed in the sticky threads at the top of this forum.
regards,
bill.

Hi, can anyone help me out with this, I need some help on designing GUI for e-learning coursewares. Some tutorials or some helpful sites will do.

I need some help with the GUI design.

Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

Pulling out my Hair, need some help from experts out there

Similar Messages

Maybe you are looking for